Monitor external flicker on Satellite U400-157

Similar Questions

• Can I use Intel Wireless Display - Netgear PTV1000 on Satellite U400-157

  I want to use the NETGEAR PTV 1000 wireless display device. The hammer on the Net says I should be able to use it if I change the operating system to Windows 7. I see that I need http://www.intel.com/support/wireless/wtech/iwd/sb/CS-031059.htm Intel Wireless Display to use.

  The Intel Wireless WifI Link 5100 wireless on the Satellite U400-157 is. Seems that it is not one that is required to run the PTV 1000? So an operating system for Win 7 can not allow me to use the PTV 1000?

  Found a similar thread about the use of the Intel Wireless Display
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64770

• Satellite U400-157 - update of display graphics card problem

  Hi forum,

  I update my Toshiba (u400-157 model: psu44e) from vista to win7, the problem occurred when I tried to update my graphics display driver because it has been deleted when I did the upgrade.

  Then when I went to the toshiba support website I downloaded many drivers and it works fine but when I tried to download entry error message display driver graphic after having extracted the files and said (can't find script engine "VBScript" script "C:\Users\... etc".)

  Please help me solve this problem.
  I tried to update the driver through device win7 Manager and it works fine but when I used a cable hdmi to the TV, the sound did not work so I had to uninstall the new version and the system to reinstall the old and works perfectly.

  concerning

  Hello

  I have the same model of laptop, and to be honest, I didn't install the display driver because Win 7 install automatically the display driver and was able to get the latest update.
  So in my case, the installation of the new driver was not necessary.

  But have you tried the latest driver from Intel page?
  Try this!

• Bad Service 3 months Satellite U400-157

  This is my problem with the Toshiba laptop travel:

  I bought in feb09 and held to my work to like once a week and then after 10 days what exactly I begin to install the system and use it.
  I discovered that the USB is not read my external hard drive that I bought as day of the laptop.

  I went to the shop where I bought it and they told me to leave and they send it to the service center.

  3 weeks later they said sorry, you have to pay money for the service because it is not under warranty more due to physical damage.

  I said there is no damage. The USB port does not work there is not zero even unique to my laptop.

  Sorry Mr usb is broken inside.

  How the hell can a user interrupt port on the inside? Please you can complain to toshiba headquarters if you don't like what we say, you must submit your complaint in exactly 7 days from the date of purchase.

  No find out about 7 days something can you please at least fix, sorry you must buy new motherboard

  Wow your laptop brand new, no single scratch even load any data yet I have to buy the new motherboard because they can not fix it under warranty and not more.

  What happens if the device has factory defult? No, Sir, it's impossible.
  Now this is happening since March until now.

  Can someone help me what should I do to recover my rights and have them fix it for me or give me a brand new.

  I hope someone can help me.
  I really feel blurred by Toshiba.

  Hello

  To be honest, I had never had any problem with my Toshiba service partner.
  I contacted my point of service twice because I had new adapter order because that one died.
  The part was replaced under warranty.
  Last time my keyboard has been replaced because some keys na? work t and the guys are really useful. The keyboard has been replaced very quickly and without major problems.

  Usually the laptop is covered by the international standard warranty for one year (12 months). During this time should be set free every hardware problem.
  Of course physical damage are not covered, but I think that it is nothing unusual because I don't know any manufacturer where the standard warranty would cover physical damage.

  Perhaps you could contact other ASP in your country in order to get a second opinion.
  It's worth a try.

  Here you can find the database of aspic all over the world:
  http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

  Welcome them

• How I restore the update to the BIOS on Satellite U400-157?

  I recently updated a Tempro alert for update of the BIOS for the notebook. Now, I noticed that the screen blanks a few times at PC startup. It was't there before. How do I roll back the update of the BIOS to a previous one.

  I don't get to see the BIOS updated screen other cases other than the time I did the BIOS update.

  Hello

  To be honest I don't understand exactly what your problem is.
  You said:. Now, I noticed that the screen blanks a few times at PC startup.
  Does that mean exactly? Is your black screen until Windows has started?

  To be honest, I put t think the BIOS update would be the reason for which go into the BIOS (press F2) and set the default BIOS settings (F9) and save the changes (F10).

  If you want to recover the BIOS version earlier, then you will need Flash module ROM BIOS using a basic BIOS version BACK. You will find on the European driver Toshiba page only the win versions

• Satellite U400 and Vista - Apple iTunes installed error message

  The Toshiba Satellite U400-157 equipped of Windows Vista is running in many errors.

  The last instance during the installation of the software Apple itunes 10.5. On an initial installation with the 10.4.1.10 present. He gave the itunes error has an invalid signature, it will not be installed. After you uninstall the itunes 10.4.1.10 and trying to install version 10.5, it gives instant error attached messages.

  Can someone please suggest what I might be able to do with vista. I need to upgrade to windows 7, this will help. I don't want to see a message that it will not install Windows 7 after having paid for it online.

  > Please refer to help and Support for more information...
  In the window title is iTunes and Toshiba doesn't support this request so I'm afraid, you're on the wrong here m support page.

  What do you think? Maybe you should contact Apple support. They have the best experience with own product.

• Satellite U400-15 q: monitor external glitter

  Any monitor flashes on my laptop, and no, I don't have an HDMI output on it.

  Which means this: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=150197 does not apply.

  I just it back? Is there a fix, or should I get my money back?

  Thanks in advance.

  Hello!

  Have you really tried all the instructions posted by Haider?
  I mean another cable VGA, AC adapter, monitors and so far.

  Try to update the BIOS and the display driver. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If it doesn't work you should go an ASP. Technicians can help you with this problem.
  I'm pretty sure that this problem can be solved, because a friend of mine has a Satellite U400 too and it doesn t have problems using an external monitor. :)

  Good bye

• Satellite U400 monitor starts and then goes black

  At startup and on wake mode "Watch" any spill there usual screens then the screen goes black. Everything can be seen and operated to shine a bright light in the monitor. Everything works perfectly for an external monitor. What could be the problem? How to fix?

  Toshiba Satellite U400 PSU44A-00J00C win XP

  Post edited by: Wildx

  When you use the external monitor and when the OS is fully charged, try to use the FN + F5 key combination to turn on laptop's LCD rear.
  This option is available?
  It work?

• Satellite U400 and dynadock PA3542E-2PRP - jerky monitor

  I installed all the drivers under Vista properly on my Toshiba Satellite U400. But the connection is far from high performance. The display is very choppy.

  What is a problem?

  Hello

  What display driver that you have installed for your Satellite U400? Have you installed the latest driver from the Toshiba page directly?
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Assume you mean the external monitor then have I you tried another cable for it? You can test it with a high quality cable please?

  Maybe a BIOS update could also be helpful

• Try to restore Satellite U400 with external ODD

  Hi, I'm fighting with my laptop trying to restore it to factory settings, my cd player died some time ago and I have been using an external.

  I tried to restart using the recovery disks in the external drive, it starts the process and wants the recovery disk set in the default cd player (one broken), also tried to restart the recovery of HARD drive and receive the same message to put the disc into the cd player?

  I also have a copy of windows THAT XP pro disk so I downloaded a program called wintousb and tried to boot and load a new copy of windows by the usb port, got an error about a missing file.

  I'm about to give up then if someone could help me that would be great.

  Thank you

  Hello

  One of my friends owns a Satellite U400 and I tried to boot from the external USB CD/DVD drive, but this was not possible. I guess that there is no support on the side of the BIOS.

  However, the installation using the USB it works...
  I recommend you the Win - USB forum of possible solutions.

  In addition, you must make sure that the driver SATA is included because Win XP would not see the HARD drive without driver

• Satellite L850 - is possible to connect two monitors external simultaneosly

  Hi, I have a L850-150 and I would like to know if it is possible to connect two monitors external simultaneosly, one by Hdmi and the second by Vga to enjoy an installation of three active screens (including the laptop screen). Im trying to figure out how to do without using a USB to adapter vfga or a Matrox dualhead2go.

  I want to use the outputs existing.
  Thanks in advance

  Some laptops supports a dual output: for example the Qosmio X 500 as shown here:
  http://APS2.toshiba-tro.de/KB0/TSB13033Y0000R01.htm

  But for Satellite L850 this isn t possible.
  But you can use an external device, such as Dynadock
  http://www.Toshiba.com/us/ACC-dynadock

• Screen starts flashing on Satellite U400

  (Satellite U400 laptop purchased in June 2009)

  Today the screen started to Flash, I unplugged it and it stopped, and it worked when I plugged it in.
  I checked the refresh rate of the screen and it is to 60 Hertz

  Is there an underlying problem?
  He is currently, I should check anyway get?

  Just a question; Do you mean the external monitor?

  > I unplugged and it stopped, and it worked when I plugged it in.
  Do you mean that you have disconnected from the laptop AC adapter?

  This sounds like the problem known to me
  I read many similar discussions in various forums
  Generally, this is question of ground loop which can cause a blink that you can solve the problem by using an adapter 2-pin

• Unable to start my laptop Satellite U400

  Hi all

  After the installation of windows Vista Home Premium in my laptop Satellite U400 series and new partion Recovery created in what, I restarted my laptop and found no screen after the SCREEN TOSHIBA "LOGO". not even access the CD Rom drive, I tried all bootable drives.

  One! Kindly help me.
  The BIOS update will solve this problem?

  Thanks in advance.

  Hello

  You are able to access the BIOS?

  > The BIOS update will solve this problem?
  How you want to update the BIOS if you n t nothing appears on the screen?
  You'll have to start in windows to update the BIOS on this U400!

  Please connect an external monitor to the laptop and check if something wouldn't be visible on the external display!

• Satellite U400-15E - cannot start new USB HDD

  Hello.

  Recently a bought a WD My Book external with 3TeraByte to use with my Satellite U400-15E. I can use inside Windows 7 Ultimate without problem. But if I try to boot from it (by pressing the F12 key), the BIOS does not even see the drive.

  Is it because Toshiba does not use Unified Extensible Firmware Interface (UEFI)? UEFI BIOS can overcome the limitation of 2.19 to in computers today easily, as explained in the following Western Digital document:
  [http://www.wdc.com/wdproducts/library/Flyer/ENG/2579-771501.pdf]

  This would allow me to use my new external drive to store an image Ghost drive HARD internal of my Toshiba for example. I mean 3 TB and more capacity is a reality today. When Toshiba updates their UEFI BIOS support?

  Material used:
  Toshiba Satellite U400-15E (BIOS v5.00 10/26/2010)
  Western Digital My Book Essential 3TeraByte - Firmware v1.014 (USB 3.0 interface)
  MS Windows 7 Ultimate - 32 bit version

  Thank you

  Hello

  Satellite U400 supports devices to boot according to the user manual:
  USB FLOPPY DRIVE
  HARD drive primary school
  Optical devices
  Network (LAN)

  If the USB drives are not supported.

  But you're absolutely right Re: 3 to and a larger capacity is reality today, but Satellite U400 is older model laptop and not newer ;)

• Good driver installation for Satellite U400-10 order

  I bought a Toshiba Satellite U400-10 opportunity and I would do a fresh install of Vista 64.
  The hard drive has been replaced, and I have no recovery disk.

  I think I found all the drivers and software from toshiba, but I would like to know if the below installation order is correct or needs to be adjusted. Thanks in advance for any help you can provide.

  _Archive/Software Installation Order_

  Microsoft Vista 64 Home Premium
  Microsoft Vista 64 Service Pack (SP1 & SP2)

  Intel Chipset Device Software
  Intel Turbo Memory & Intel Matrix Storage Manager
  Intel Display and HDMI Audio driver

  Driver audio Conexant CX20561
  Driver LAN Marvell 8040/8055
  Synaptics Touch Pad Driver
  OZ129 O2Micro Flash Memory Card Reader
  Intel PROSet Wireless Software
  Conexant Modem driver
  Driver Webcam Chicony
  Toshiba Bluetooth Stack
  Driver Toshiba SPS
  Java 2 Runtime Environment

  Toshiba Value Added Package
  Toshiba hardware configuration
  Toshiba supervisor password utility
  Toshiba Extended tiles for Mobility Center
  Toshiba Modem on Hold (Netwaiting) utility
  Modem of Toshiba region Select utility
  Toshiba HDMI Control Manager
  Toshiba Bluetooth Monitor
  Toshiba SD format utility
  Toshiba SD start utility
  TOSHIBA ConfigFree
  Toshiba Disc Creator
  Toshiba DVD player
  Acoustic silencer of Toshiba
  Toshiba face recognition
  Toshiba Speech System
  Toshiba TEMPRO
  Toshiba product information online
  Toshiba Assist

  Seems ok.
  Personally I follow than such orders because especially its any driver is installed initially, but some tools requires the installation of other tools.
  Thus, for example, value added package must be installed before you install other software from Toshiba