Oracle 10g Patch Set Bundle Rollup
Hi guys...Where can I find this file p7612639_10204_Solaris - 64_rollup_bundle_no3.zip?
I searched on metalink without success.
Please guys, that you will forgive me that I posted this in the forum of pl/sql by mistake so it could appear as if it is a duplicate.
Thanks in advance.
Where can I find this file p7612639_10204_Solaris - 64_rollup_bundle_no3.zip?
I searched on metalink without success.
Please guys, that you will forgive me that I posted this in the forum of pl/sql by mistake so it could appear as if it is a duplicate.
Hello
It is available on metalink. Go to patches & updates and then look for the patch number 7612639 and select it to Oracle Salaris 64 bit.
The file name is p7612639_10204_Solaris86 - 64.zip.
Good luck.
Concerning
Rajesh
Tags: Database
Similar Questions
-
Oracle 10g patch and psapi.dll conflict
I'm trying to package Oracle 10 g (with the version of the hotfix 10.2.0.4). In trying to "Setup capture" the Oracle patch, it seems that the Thinapp process is suspended to the installation routine. While in the middle of the capture, the Oracle installation routine will block. If I leave the configuration Capture Thinapp, the installation will continue. I narrowed down it to an arm wrestling native psapi.dll .
Someone has experienced this problem trying to package the oracle patch? How you end up solving the problem?
I use the last version 4.6 Thinapp.
Thank you
A few weeks ago I got exactly the same problem with psapi.dll with ThinApp 4.5 and Oracle 10 g on Windows 7 10.2.0.5 patch. In my case, the installation files began from a network location that causes this problem. After copying files to fix on the local computer Installer and run it there from here all works well. Also try to download the files to install fix again, maybe they are corrupt?
-
Oracle Application Server 10g R3 with patch set 10.1.3.5.0
Hi all
Can someone help me on this point, when I install Oracle Application Server 10g Release 3 (10.1.3.1.0) and patch set 10.1.3.5.0 on Linux. I'm not able to find the container forms and reports.
This version does not support forms and the States or I go what OAS 10 g R2 (10.1.2.0.2) with the patch set 3 (10.1.2.3.0). What is the difference between these two versions.
Please help me.
Kind regards
Hi James,
First of all forms and reports are only available in OAS 10 g 2 (10.1.2.0.2) and you would go to the latest version in gr 10, 2 which is 10.1.2.3.
The Oracle Application Server 10 g 3 version is a limited edition and SOA and OC4J components.
So if you need to forms and reports, you must make 10 gr 2 OAS.
Kind regards
Prakash.
-
10g Release 2 Patch Set 1 for windows 2003 32-bit
Hello. I'm going to find of the trouble the * 10.2.0.3 Patch Set 1 * for 10g R2 for Win2003 32 bit on metalink. I found 2 that is 5337014all to the right but none Patch Set 1 set of patches.
No one knows the number of patch from Metalink for Patch Set 1 so I could do a quick search?
Thank you!!!
Published by: avtandil on October 16, 2008 09:00Then you have the wrong spec, patch 1 is 10.2.0.2, patch 2 is 10.2.0.3, patch 3 is 10.2.04, see Note: 316900.1 ALERT: Oracle 10 g Release 2 (10.2) Support Status and alerts
Enrique
-
Oracle 10g with 10.2.0.5 patch app thin?
Hello
I'm working on creating a fine app for oracle 10g. I am able to create the thin application without patch and everything seems to work normally, but in our situation, we must apply the 10.2.0.5 patch. When I patch the program, everything still seems to work ok, so I'm going through with the postscan, which also seems to work fine until there finishes.
I don't know if this is related, but I get the following warnings after the postscan:
Could not copy the file--> C:\Program Files (x 86) C:\ProgramData\Microsoft\RAC\StateData\RacMetaData.dat \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%Common AppData%\Microsoft\RAC\StateData\RacMetaData.dat
Could not copy the file--> C:\Program Files (x 86) C:\ProgramData\Microsoft\RAC\StateData\RacWmiEventData.dat \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%Common AppData%\Microsoft\RAC\StateData\RacWmiEventData.dat
Could not copy the file--> C:\Program Files (x 86) C:\ProgramData\Microsoft\Search\Data\Applications\Windows\MSStmp.log \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%Common AppData%\Microsoft\Search\Data\Applications\Windows\MSStmp.log
Could not copy the file C:\Users\All Users\Microsoft\RAC\StateData\RacMetaData.dat--> C:\Program Files (x 86) \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%drive_C%\Users\All Users\Microsoft\RAC\StateData\RacMetaData.dat
Could not copy the file C:\Users\All Users\Microsoft\RAC\StateData\RacWmiEventData.dat--> C:\Program Files (x 86) \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%drive_C%\Users\All Users\Microsoft\RAC\StateData\RacWmiEventData.dat
Could not copy the file C:\Users\All Users\Microsoft\Search\Data\Applications\Windows\MSStmp.log--> C:\Program Files (x 86) \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%drive_C%\Users\All Users\Microsoft\Search\Data\Applications\Windows\MSStmp.log
Could not copy the file C:\Users\All Users\Microsoft\Windows Defender\IMpService925A3ACA-C353 - 458 A-AC8D - A7E5EB378092.lock--> C:\Program Files (x 86) \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%drive_C%\Users\All Users\Microsoft\Windows Defender\IMpService925A3ACA-C353 - 458 A-AC8D - A7E5EB378092.lock
Could not copy the file C:\Users\All Defender\Scans\History\CacheManager\MpSfc.bin--> C:\Program Files (x 86) Users\Microsoft\Windows \VMware\VMware ThinApp\Captures\Oracle 10 g + patch\%drive_C%\Users\All Users\Microsoft\Windows Defender\Scans\History\CacheManager\MpSfc.binAnd then finally I get this at the end of the 'Build Project' message:
C:\Windows\hh.exe: an executable not valid
Build failed *.I can't determine why the build fails.
Any help would be appreciated.
Hi Mark
1. the warnings that you are seeing after Postscan aren't a problem, in my view, they are for most of the newspapers that were not copied to the ThinApp of your application project (probably because access is denied because some application process is running and use).
2. the error you see regarding hh.exe during the generation probably occurs because it is a 64-bit binary (and ThinApp 4.7.3 can't stand not the 64-bit binaries), in all cases, please open the file package.ini in the project folder (the folder that contains the project ThinApp registered Oracle 10 g, generated by the capture process) and find the section [hh.exe] and add 'Disabled = 1' under it , and then try again to build again by running build.bat.
Thank you.
-
Media pack Readme for the parts needed to download for the various products of the EMP, Essbase has Oracle Identity Management 11 g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x 86 (64-bit) listed. Can someone please tell me if this is a must have. If this isn't the case, under what conditions do this?
Thank you
Ted.It is not a must have, if you are unsure what is IOM, then you probably don't need it :)
See you soon
John
http://John-Goodwin.blogspot.com/ -
Hi all
OS: RHEL
DB: 10.2.0.1
I am new to the correction of oracle database, I need to patch up my version of oracle 10.2.0.4 10.2.0.1 database database.
Veuileez provide me a good doc or a link to the same thing.
BR
SphinxIf you go to patch, patch to the latest 10.2.0.5
PL see this Doc MOS
10.2.0.5 Patch set - availability and known issues [1087991.1 ID]
Guidelines for the application of the 10.2.0.5 patch are included in the patch README file.
On top of 10.2.0.5, it is advisable to apply the last power supply (10.2.0.5.9) - pl see this Doc MOS
Quick reference to RDBMS database patches Patch numbers [ID 753736.1] group
This should be applied after 10.2.0.5 - once again, the instructions are in the README file.
PL also know that 10 gr 2 is out of taken in charge - you should be upgraded to 11 GR 2
HTH
Srini -
Dear all,
I installed oracle 10g 10.1.2.0.2 with infrastructure and forms & report application server.
now, I downloaded the Patch 10.1 . 2.3 to apply to this topic
I have two houses in my application server 10g (infra and forms & report).
should I apply first to apply the patch on infrastructure and on forms & apartment house.
am I right. ? can you please give me the procedure how to apply the hotfix on the server of applications 10g 10.1.2.0.2.
Thank you and best regards,
Shir khanYes, it's true :-)
-
The Group of hotfixes check Oracle and the set of patches available
Hello
Is there a documentation available on metalink or in the forum regardingexisting patches group looking for oracle DB, clusterware & applications. Oracle Server
andthat the recommended placement group of patches from oracle for patches existing for above items group?
Thank youPlease read the note of My Oracle Support * ALERT: Oracle 11 g Release 1 (11.1) Support Status and alerts [454507.1 ID] *.
Such a document exists for each major version of Oracle database: 10.1, 10.2, 11.1 and 11.2, etc..
Edited by: P. Forstmann may 25, 2010 16:26
-
I recently upgraded from Oracle Forms/Reports 10 g and 11g. Oracle 10g reports saving as PDF is easily converted into a word document, however, Oracle 11 g converts not as 10 g. What is the difference and how to make the report of 11g saved in a PDF file be able to convert a Microsoft Word document itself.
Thank you
Steven
Hello
There is a "known issue" with the PDF file in 11g:
ALERT: Indicates problems PDF in 11.1.2.1.0 group of fixes for Non-Linux (Doc ID 1522543.1) platforms
Maybe the problem comes from this 'problem '...
"Patch Set Exception" exists for this problem.
Kind regards
-
Hello
Win7 64 teacher, Oracle 11.2.0.4.0
Although the last group of patches 503 has been installed, there is the news that 'Patch Set 5.0.2.00.07 is available'.Please see screenshot. No other problems with the 503 until now.
What could be wrong here?
Thanks and greetings
André
Hi Andre,
This should be fixed now, and you should see "Update system".
Concerning
Patrick
-
Urgent: db link from oracle 10g to sql server 2000
Hello
I have an oracle 10g db connection to sql server 2000. It was created a couple of years. This works.
I have now created another link db of the same oracle on the same sql server server but it does not work.
But I'm getting ORA-28500 and error IM002
. Please notify.
I can't understand what is wrong as I followed the hs odbc set up on this link db in the same way as I did 2 years ago.
Thank you
Shailaja
Just sort the problem.
Basically, I use HSODBC to connect to SQL Server from Oracle (on windows 2003 64-bit).
To do this, I need to create a connection ODBC from Oracle to SQL Server.
HSODBC is a 32-bit application and is why we use the ODBC 32-bit driver when we create the ODBC connection.
When I created the connection ODBC from Oracle to SQL Server, I used the ODBC 64-bit driver and that's why the system could not find the name of the data source.
I have now created connection ODBC from Oracle to SQL Server via the ODBC 32-bit driver and everything works fine now.
No offense to anyone, but as you all works using Oracle software, I was hoping a better answer than some of the answers above. You can say that you did not understand the question or you do not know the reason why it happened.
I have just listed how the problem was fixed so that in the future one having the same problem can benefit.
-
Hello
One of my APEX engine is still under the 4.1.0.00.32 version - all others were already updated with the Patch Set 4.1.1.00.23. I wonder if, for the engine APEX with the version 4.1.0.00.32 (without the patch), can I put it directly in the APEX 4.2.0.00.27?
My version of the database is:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0
Thank you.Hello
According to the documentation, it should be no problem.
http://docs.Oracle.com/CD/E37097_01/doc/install.42/e35123/overview.htm#CEGEFBFI
The reason is that the upgrade you mentioned was an update which has improved the installed version. Ranging from 4.1 or a version earlier than 4.2, in its name one updated, in effect installs a new version of the Apex base objects and then copy spaces of existing work and applications for this installation. Apart from what gives a clean installation, this also has the advantage of maintaining the old environment if you have to downgrade. See
http://docs.Oracle.com/CD/E37097_01/doc/install.42/e35123/trouble.htm#BABDJIFE
Concerning
André -
11g Release 2 (11.2.0.3) Patch Set 2
Hello
11g Release 2 (11.2.0.3) Patch Set 2 is available https://support.oracle.com
delivery on but not on.
On edilivery, I see that Oracle Database 11 g Release 2 (11.2.0.1.0)
Is it normal or I make a mistake?
Thank you.user522961 wrote:
Hello
11g Release 2 (11.2.0.3) Patch Set 2 is available https://support.oracle.com
delivery on but not on.
On edilivery, I see that Oracle Database 11 g Release 2 (11.2.0.1.0)
Is it normal or I make a mistake?Thank you.
There is a confusion, 11.2 patchsets are now full. So now you can download and install 11.2.0.3 directly.
Here is the download location for you:
But its not available on e Delivary.
11.2.0.3 location of Group of patches for the RDBMS and grid Infrastructure. [1362393.1 ID]
Hope this helps
Published by: 909592 on February 24, 2012 14:42
-
Patch Set updates and the version number
Oracle document 854428.1 , Patch Set updates (UAR) for Oracle products, has this to say about the version number:
2.3 version reference for easier tracking
Oracle combines a version number of the hotfix. The fifth database version number is incremented for each power supply. For example, the original POWER supply is version 11.1.0.7.1, the second power supply for version 11.1.0.7 is 11.1.0.7.2 and so on.
My DBA just told me that they applied PSU3 to our database, that was the version number 11.2.0.2.0. I checked the version number after the power supply has been applied, but it is always the same:
SQL > select version of v$ instance;
Version
-----------------
11.2.0.2.0
The PSUS are changing the fifth version number or not?You can query sys.registry$ history and check the comments column to find the power supply applied. It is updated when executing the step according to patch (catbundle.sql).
Published by: user7861302 on October 8, 2011 17:24
Maybe you are looking for
-
Satellite Pro A300-1NT - update of the BIOS has not
Hi, I'm an island here can someone help me solve this problem without sending it to the workshop of maintenance if possible. I've just updated tempro informed me a bios update. I ran the update, but it froze completely the system (Vista). I waited 15
-
How can I get rid of unsuccessfully requests for apps I have more?
-
'Open doors' error on HP OfficeJet 6600
Hello I have a printer HP OfficeJet 6600. After I changed the 932XL with a new black print cartridge (original), I get an error: door open, with the message: "the door or lid should be closed to print. Make sure it is completely closed. » I checked t
-
2 questions about mcupdate.exe
Use Vista Home Premium 32-bit with SP2 of Vista on HP desk top of page 2 questions about mcupdate.exe 1. what is? When I google it I get's things on McAfee. I have McAfee and never had McAfee. The information google seems to indicate that it could be
-
my thumb nails have turned into a generic image
Hello, pictures of my images have changed to a generic GIF and I try to get the real image as the thumbnail view. I can't change the view when I open my pictures. I have run the checker system files and scanned, but there is no problem. This problem