Satellite Pro A300-1NT - update of the BIOS has not

Similar Questions

• Satellite A300-17N - update of the BIOS has not

  Hello

  I tried updating the bios with the winflash utility of toshiba-site official. He created a backup file and pasted into the half of the process. Then when I tried to restart the screen was white (without food). I hear the cpu works, the fans, the lights on the keyboard and hard drive. But I can't hear the beep on startup and the screen as I said is empty without power.

  What should I do? My motherboard is destroyed?

  Hello

  > What should I do? My motherboard is destroyed?

  The Bios needs to be reflashed. Contact the service center:

  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

• Satellite Pro A300-257 while flashing the BIOS

  Hello

  I have a dilemma. I recently installed windows 7 on my laptop of girlfriends who is a Toshiba Satellite Pro A300-257, everything went well until I tried to update the Bios. I followed all instructions on the toshiba site had to put the model number in to get good bios double checked and triple checked before running the program, but when I ran the system crashed to halfway through the closed system update and now it wont even boot lights are on cd player is ROAR a few stays on black screen.

  I read many forums and it seems im not the only one with this problem.
  I just got the phone to toshiba and they say im not covered because I does not you can call and go through it with them on the phone, even if at no time did he tell me to do that I followed the instructions of there Web site.
  I also confirmed with them that I used the correct bios but they say that they are unable to prove that and I can put in the wrong information that I did not.

  In my view, there is a program that will allow me to boot from the cd so I don't have to go out and buy a reader external floppy to Flash the bios, I think that his winflash. Unfortunately, all I can find is the executable program on there website which im guessing will not start work.
  Anyone know where I can find the prog to update the bios and the bios file so I can create a cd bootable to Flash the bios.

  Any help will be appreciated with gratitude

  Thank you very much

  Hi mate

  I m afraid there is no alternative to reflash the BIOS to the traditional version of BIOS who can start the BIOS updated using an external USB drive and the floppy disk.

  The European driver Toshiba page contains only the BIOS Win-based that can be updated when the windows operating system. The traditional BIOS is not available for download. Only authorized service partners have access to this version of BIOS and that's why I don t see any alternative as to get in touch with the guys and to ask for help.

• Satellite Pro A300D (PSAK1E) - update of the BIOS didn't

  Hello

  I recently tried an update of the bios after doing a clean install of windows 7 64-bit. The process is complete and the phone has rebooted. In the end, the laptop could not start and just displays a black screen.

  I tried some of the methods on the internet using recovery from the crisis on a usb key, but have had no success

  I'm not so im using the wrong combination of Fn + B etc or what but could really do with some tips

  Thanks in advance

  Hello

  I put t think there is much you can do if the BIOS update failure. Usually in this case the ROM module needs to be reflashed, but this is possible only from an authorized service provider.

  In my opinion, you should contact the guy and ask for help. I m sure they can help you solve this problem. :)

• Satellite A200 - 28H - update of the BIOS has not

  Hello

  I have a Satellite A200 28 h.
  -----
  {color: #ff0000} * I try to upgrad my bios of my laptop froze I turned it off using the highlight of power
  * now its dead please help me to save my pc *.

  {color}-

  {color: #ff0000} System properties:
  {color} {color: #ff0000} Manufacturer: {color} TOSHIBA
  {color: #ff0000} Product: {color} Satellite A200
  {color: #ff0000} Version: {color} PSAE6E-0GL045FR
  {color: #ff0000} Serial number: {color} 38258574K
  {color: #ff0000} Identifying unique universal: {color} 5FDE397F-EFCD11DC-91D0001E-EC32FB26
  {color: #ff0000} Startup type: {color} power button
  {color: #3366ff} Properties of the motherboard {color}:
  {color: #ff0000} Manufacturer: {color} TOSHIBA
  Product: ILHAM
  {color: #ff0000} Version: {color} 1.00
  {color: #ff0000} Serial number: 0123456789AB {color}.
  I downlod this bios: [update of the BIOS | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 738 & langua ge = 16 & selOS = 26 & selType = 4 & yearupload = & monthupload = & dayupload = & useDate = null & mode = userMachines & search = & action = search & macId = & country = 45 & 1 6 = selectedLanguage & type = 4 & page = 1 & FROM = vista & ID = 66222 & DISO = 26 & pilot language = 42 | bios] -.

  Driver details
  To download your chosen file just click on the file below. When prompted, select "Save this file to disk" and select "OK".
  The file will then be downloaded and saved to a location specified on your computer.
  Downloaded files can be opened and extracted using WinZip (select the WinZip link to download a copy of WinZip software).
  See below or check the contents of the zip for installation details. [Update to the BIOS: http://eu.computers.toshiba-europe.com/innovation/vista_drivers.jsp?service=EU&from=download_driver _ details & action = search & SelCategorie = 2 & selFamily = 2 & lSeries is = 153 & selProduct = 738 & language = 16 & selOS = 26 & TLigne is = 4 & yearupload = & monthupload = & dayupload = & useDat e = null & mode = userMachines & search = & action = search & mac Id = & country = 45 & action = search & page = 1] [Return to the download page of Driver: http://eu.computers.toshiba-europe.com/innovation/vista_drivers.jsp?service=EU&from=download_driver _ details & action = search & SelCategorie = 2 & selFamily = 2 & lSeries is = 153 & selProduct = 738 & language = 16 & selOS = 26 & TLigne is = 4 & yearupload = & monthupload = & dayupload = & useDat e = null & mode = userMachines & search = & action = search & mac Id = & country = 45 & action = search & page = 1]

  FTP - URL [| http://eu.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport.toshiba-tro.de%2ftools%2feula%2fcalleula.asp%3fID%3d66222] [calleula.asp? ID = 66222 | http://eu.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport.toshiba-tro.de%2ftools%2feula%2fcalleula.asp%3fID%3d66222] Date last modified01/21/09CompanyToshibaTypeBIOS WideDescription 1906Version2.60 - WIN32LanguageUniversalCountryWorld UpdateSubtypewindows-basedSize (KB)

  This Bios update adds functionality to your system. {color: #ff0000}
  This Bios is only compatible for portable computers with Windows Vista! (32-bit only!) {color}

  (BIOS stands for Basic Input and Output System. This program is stored in a chip memory dead on the motherboard.
  When the computer comes on, the BIOS is launched to perform various functions to start.)
  For the detailed update information please see [Information update BIOS Toshiba | http://www.toshiba-tro.de/biosinfo]

  ModelEquium A200 (PSAE5), {color: #ff0000} Satellite A200 (PSAE6), {color} Satellite Pro A200 (PSAE7), Equium A200 (PSAE8), Satellite A200 (PSAE3), Satellite Pro A200 (PSAE4) operating systemWindows Vista 32 bit

  How do you do if your laptop does not start and if there is no action of the machine?
  I just think only technician ASP could help you maybe the motherboard (ROM chip) is not dead, but it can check only the technician for laptop

• Satellite C660D boot - update of the BIOS has not

  Hello

  In recent days, I get a blue screen of death with the error 'whea_uncorrectable_error', I read something about the BIOS update, because the error is probably caused by the previous version of the BIOS. I gave the updated correctly, but as soon as restarting my laptop, nothing has been started.

  The fan and the keyboard work but nothing else. I tried to remove the RAM, remove the CMOS battery, pulling on the battery and holding the power button, but nothing seems to work.

  Can you please help me and tell me how to recover my BIOS?

  because the error is probably caused by the previous version of the BIOS.

  Older version of BIOS does not BSOD... cause the BSOD appeared during the last day, but I guess the laptop worked correctly in the past under the old version of BIOS... the BIOS could not the problem here...

  However, the fact is that the laptop is dead now... probably because the update process was interrupted due to the BSOD...

  From my point of few the EPROM has to be re-flashed again using BIOS crisis disk...

  Some people tried to solve this similar problem using the 3rd party crisis disk (use forum search the crisis disk to find similar topics), but it still does not...

  That's why I think that in most cases only the Toshiba ASP may be able to reflash the EMPRO using the original disk of crisis

• Satellite Pro A300-1LG - cannot enter the BIOS settings

  For some time when I turn the notebook on the page where it appears the Toshiba logo are not displayed and I can't get into the BIOS.

  And put back two or three times and then reappear details.

  I tried to reinstall the BIOS, but the BIOS installation tells me that the version I installed is the existing one.

  Do you have any suggestions?

  + The message was edited: assignment has been translated.

  *@manona*
  Please post in English. This is a user to user community where the English language is required!

  (* 1) * my knowledge the CMOS battery is soldered to the motherboard and cannot be replaced like for example on desktop PC
  (* 2) * remove the CMOS battery would NOT reset the BIOS nor would be to remove the passwords.

  If I understand your problem, you are not able to access the BIOS, but you can start the laptop and the system. Is this correct?

  You have a kind of password (user / supervisor password?)

• Satellite Pro A200 - HDD recognised by the BIOS but not in the startup list

  Hello

  After some problems with the virus of my laptop is not able to start more. How reset BIOS ignores the boot from the HARD drive and try to start either from CD or network. The HARD drive is recognized by the BIOS (it appears as 1 hard drive in the home page). In the selection screen startup list preferences appear only floppy drive, CD/DVD and network.

  The hard drive can be mounted and browsed without any problem of windows or Linux. I tried to install both systems and the installation always succeeds but when rebooting the system is not able to boot from the hard drive.

  I guess it's a BIOS problem, but I'm not sure about this. What do you think?

  By the way how do I update the BIOS without having neither windows nor floppy drive?

  Thanks in advance

  Hi mate,

  I m a bit confused now as a first step, you wrote that the computer can boot from the HARD drive, but then you t wrote you browse the HDD with Windows and Linux

  I'm not sure this is the problem of this but I recommend to load the default settings in the BIOS.

  If your HARD drive doesn t work could be defective (bad sectors or something else). You could test with special diagnostics as Drive Fitness Test Tools. It s a freeware tool so you can find it using Google.

  By the way: have you tried to install Windows with the Toshiba Recovery disk?

• Satellite L40 - 14Y - update of the BIOS has not

  Hello.
  I flashed (better: I tried to) the BIOS under Windows for my laptop.
  The problem is after loading default configuration and exit the bios with saving the changes, the screen is black.

  Now I want to recover my BIOS via method disk crisis but I need a BIOS wph file to do so, but I can't find it in downloaded files of the BIOScfiles.
  Does anyone know how and where to get?
  favorite I'd like having the version 1.60.

  Is there a virtue, for whom?
  any with the same model discharge the file would be for me and I download or send an e-mail?
  [email protected]

  Thenk you!

  Hi year - Dr.Zej.

  You want to make this method of crisis? In the worst case, you could destroy the motherboard together and this procedure isn't so easy. In your case I don't this

  From Toshiba Web site shows only BIOS update for Windows and that s what you can get

  In your case I would contact a service provider authorized in your country. Guys can reflash the ROM module and should have all versions of the BIOS. Download just in contact with them! ;)

• Satellite A200 PSAE0E - no display after the update of the BIOS has not

  Hi all

  I have Toshiba A200 PSAE0E. I got the Vista OS to Xp.
  When I tried to upgrade the BIOS setting, the system frozed.

  I reformulated the system using the power button. There is no display on my screen when restarting.
  I tried to restart by pressing F1, F2, key to the House and even removed the battery for a while, until what there is no display on my screen.

  I even tried connection and an external monitor, but that also there is no display.
  At the moment I don't have any sort of recovery disk.

  I would be very happy if someone could help me.

  Hello

  To me, it seems that the BIOS update procedure has failed.
  For no apparent reason has frozen the system and you have interrupted the update procedure.

  According to mu ROM module (where the BIOS is stored) has not been flashed properly and this is the reason why you cannot start the laptop.

  In this case, you need the help of ASP I know, this really stupid s situation but I'm afraid there is no alternative to m.

  I think that the technician will try to flash the ROM module using a special BIOS and then the cell phone should start properly if all goes well. I'll keep my fingers crossed for you.

  Good luck

• Update of the BIOS has not

  I got repeated messages that he needed to update the system. I chose the restart. The message says that the BIOS of HP has been rewritten. The end result was a Boot Device not found message and a reference to this address

  Found an old message of 2013 which suggests turning off the computer, hold the Windows key and B and restart. Seems to have worked. I {m back in business.  Thanks anyway.

• Update of the BIOS has not now my Equium A60 will not work

  I tried to update my BIOS I've been experiencing problems with my keyboard and screen but to halfway through the laptop died, he seemed to be a glitch with the power! ... today obviously it not light!

  Do I need a new motherboard or I can buy and replace the BIOS chip?

  I have an A60-181 PSA67E.

  Kind regards
  Ian

  HI Ian,

  In situations such as yours, the best option is to contact a Toshiba authorized Service partner who will have the necessary equipment for re-flashing your CMOS with the latest BIOS chip. This will be a much cheaper option than to replace the motherboard or BIOS chip

• Need driver more recent card ATI Radeon 3650 - Satellite Pro A300-1NT

  Hi all

  I'm looking for the latest drivers for ATI Radeon HD 3650 onboard Satellite Pro A300-1NT.
  During the game, Transformers: Revenge of the Fallen game (2009) by Beenox Inc.... I get squares pixelated on the screen (instead of dust) and possibly a blue screen.

  I use Windows XP Pro
  I searched drivers * Toshiba site * and the only one that I found are:
  01/12/09 Display Driver ATI Windows XP 8.477

  * Support game * suggests upgrading driver for a newer version.

  * Ati manufacturer support * have driver for ATI Radeon 8650 but not compatibile with Solution Mobile - and asked for Mobile Ati support I got the Transfer:
  + AMD for ATI products customer service does not provide direct technical support for computers laptops/notebooks this moment (by phone or e-mail). If you need live technical support please contact the manufacturer of your laptop/notebook computer system. +

  + [http://support.amd.com/us/kbarticles/Pages/737-28041SupportforATIMobility.aspx | http://support.amd.com/us/kbarticles/Pages/737-28041SupportforATIMobility.aspx] +.

  I ask then is there latest drivers for Windows XP

  Hello

  I think you have already answered that question yourself...

  As you wrote that you can get all the drivers on the Toshiba site and if it isn t a newer driver available you can nothing more I think. Satellite A300 isn t a laptop of game performance so I think that the display drivers are not so important.

  The only way to obtain a more recent version, it's looking on external Web sites. Maybe you can get the desktop pilot working had some changes I put t know but really attention! Other drivers don't have protection against overheating and you could destroy the graphics chip. Be very careful of what you do.

  Alternatively, you can search on the Toshiba site for other models of laptops with ATI card too. Maybe, you can get a newer version

• Additional HDD in the Satellite Pro A300 1NT

  Hello.
  I have a Toshiba Satellite Pro A300-1NT. I would like to know if this model can mount a second hard drive (additional). From what I read, some models have this chance.
  Looking at the underside of the lid is a place for such a disc. But before you try to install I want to make sure.

  I exactly marked model PSAGE-00P00MPL

  Anyone know the answer?

  > Looking at the underside of the lid is a place for such a disc.
  The HARD drive connector is available? Can see you?

• Satellite Pro A300 freezes when on the internet

  Satellite Pro A300 freezes when on the internet & the only way to turn it off is to take out the battery. Bought new Dec 2010 & is under warranty - suggestions?

  Hello

  have you tried to update drivers Lan (wlan)? What browser do you use? I guess, the Internet explorer, try firefox or opera. Also, your computer may be infected with the virus, or blocked by the firewall. Have you installed software before it starts? Is this ok when you bought it? I ask you too, because you do not have a lot of information.
  It is especially the driver, software problem.