Oracle 11g Standard Edition without any server of HTTP/mod_plsql...
HelloI'm about to install the Apex, a second new database 11 g (version 2). The first was a 10g one.
You can read in the Guide of Installation of Apex:
' The following products include appropriate versions of HTTP Server mod_plsql and:however, I can't find the http server... Not any file/folder 'Apache' or 'mod_plsql '...
* Oracle Database 10 g release 2 companion CD
* Oracle Database 11 g release 1 or 2 "
Can it be normal?
Or is there something that I haven't seen?
Thank you!
Fanny
Hello
11 g, HTTP server is not on the companion CD more.
The HTTP server to download: Oracle Fusion Middleware Web Tier utility 11g (11.1.1.2.0) for Microsoft Windows (x 64)
Francis.
Tags: Database
Similar Questions
-
Execution of GoldenGate on Oracle 11g Standard Edition?
We are looking to run Oracle GoldenGate on Oracle 11 g Standard edition server to another Oracle 11 g DB on Standard. I read that the documents and they speak for Oracle for Oracle using XStreams which is part of the water course. But I understand that flows is available on the company.
So is it possible to run GoldenGate on Oracle DB Standard Edition?As far as I KNOW, Golden Gate didn't need on Oracle edition to be used, but may have license of cost differences.
It runs on Oracle version 8i for the latter, not only on the Oracle database and not only between the same version of Oracle and the same OS and not just between two Oracle db.Nicolas.
-
AWR with Oracle 11g Standard edition
Hello
I have the database to Oracle 11 g Release 11.2.0.1.0 - 64 bit Production in my database. And when I ask for the control_management_pack_access parameter it value as DIAGNOSTIC + TUNING. I generated several AWRs with 1 hour 24 hours period as well. The two reports gives the error WARNING: as DB time is less than a second, he had minimal activity of foreground in period snapshot. Some of the percentage values are not valid. and DB time is zero for each AWR reports.
Can someone please help me solve this confusion DIAGNOSTIC + TUNING pack comes with the Standard edition and why DB time gives zero?
Thank you
TK.
Hello
Database created on Standard Edition should have control_pack_management_access = none. You can change, but the risk is that you use the options that are available only on the Enterprise Edition. In itself, you can use Statspack.
Kind regards
Franck.
-
Difference between Standard 10g and 11g Standard edition.
Hi all
I tried Googling to find the difference between the Standard of 10g and 11g Standard editions, but couldn't find what I want.
Y at - it links you want to share.
Thank you
Hello
I tried, please check
http://docs.Oracle.com/CD/B19306_01/license.102/b14199/editions.htm#BABJICBB (10 G based on the edition functions)
http://docs.Oracle.com/CD/B28359_01/License.111/b28287/Editions.htm#DBLIC116 (11 g features based on edition)
Just compare the two.
Hope that helps.
-Thank you
Pavan Kumar N
-
Install oracle 11g Client in an application server (HP - UX 64-bit operating system)
I'm going to install oracle 11g client in an application server (HP - UX 64-bit operating system)
I have to create the new mount for client installation point?
Through the application server, I will access (rac) database server.
I have enough space available in / or root mount point.
I have space in / opt mounting point, can I make a directory in/opt/OU1/app and install the client at this place in the access database?
Thank you
Solaiman876149 wrote:
I'm going to install oracle 11g client in an application server (HP - UX 64-bit operating system)
I have to create the new mount for client installation point?
Through the application server, I will access (rac) database server.I have enough space available in / or root mount point.
I have space in / opt mounting point, can I make a directory in/opt/OU1/app and install the client at this place in the access database?Thank you
SolaimanYou can install in any desired point of installation/directory. Oracle does not give a flying fig this topic. Just put it somewhere that makes sense.
-
I am using oracle 11g express edition, how I can change the service name and the port number?
I am using oracle 11g express edition, how I can change the service name and the port number?
What do you mean by "port number"? HTTP port (usually 8080), or listening port (normally 1521)?
To change the name of the service, you can use (as a DBA or SYSDBA)
SQL > alter system set service_name = '
'; -
Oracle 11g Express Edition is available?
Hi all
Could you please tell me if Oracle 11g express Edition is available whether or not?
Thanks and greetingsThere is no official communication about the 11G release date express edition.
You will have to wait and watch the official Oracle site for this.
Also check this:
http://News.techworld.com/applications/3203909/Oracle-stalls-over-11g-express-release/
http://PCWorld.about.com/od/businesscenter/Oracle-mum-on-11g-release-2-1.htm
Concerning
Rajesh -
Oracle Database - Standard edition &; diagnosis Pack?
I need help, whether the following configuration is valid?
Oracle Database Standard Edition one Oracle Diagnostics and Tuning Pack
The reason I ask, it is possible to buy the Tuning Pack and the Oracle Diagnostics Pack online (he does not say it is limited to the company on the product description) and my manager wants to use it with the Standard edition. Read the MetaLink following document 1084132.1 (link below), he said that these packs are only an option if you are already running business, is this true?
So does that mean if I execute Standard, it is not possible to run, even if we buy the licenses.
1084132.1: https://support.oracle.com/CSP/main/article?cmd=show & id = 1084132.1 & type = NOT
Edited by: user6591482 may 27, 2010 02:07Hello
The following sections describe the Oracle Management packs. Management packs can be purchased only with Enterprise Edition. The features of these packs are available through Oracle Enterprise Manager Database Control, Oracle Enterprise Manager Grid Control, and API provided with the Oracle database software.
http://download.Oracle.com/docs/CD/B19306_01/license.102/b14199/options.htm
hope this helps
Daniele -
DataGuard with 11g Standard Edition
Hi, we have 11g standard edition. I want to ensure high availability. In the license document, we are able to configure the Basic Standby Database(Manually Managed). What is the difference between Data guard and base mode standby? Can HW I configure? What are the requirements? Other possible means?See Note MetaLink # 333749.1
-
Installation of IOM with Oracle db Standard Edition
The version 11g of OIM OAM works with Oracle 11 g db Enterprise Edition. These components work with db Oracle 11 g Standard Edition?
If it works then I intend to use only for the purpose of prototype, where I can use a low-end server.Exactly, Kabi.
Thiago GuimarĂ£es L
-
database Oracle 11g release 2 of windows server 2003 x 86
Hello
I want to install oracle database 11g release 2 on windows server 2003 (x 86).
I'm not finding the software for the windows version. I want to know whether or not 11g release 2 is avialable fror windows.
Please give me the number of patch to version 11g 2 if anything avialable in metalink.
Kind regards
Out stragglerGR 11, 2 is not yet available for the Windows platform. It should be released soon.
-
Synchronization of Eve in 11g Standard Edition.
I have the following environment: a primary DB and one standby DB (both 11g Standard).
I have to synchronize with primary eve but in regular edition, I can't use automatic mechanism.
I don't want to use the sales staff as Pervasync.
How can I achieve this? Can I for example to generate archives and/or control files, then send "manually" and put it to sleep?
Reg,
JarekRefer to metalink:
Alternative for the standby/dataguard in standard edition
DOC - ID: 333749.1Werner
-
Oracle 10 express edition on windows server 2008
I installed oracle 10 (10.2.1015) on Windows server 2008
but unable to log on
getting error as
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
also the default browser not opening
Please help meSalvation;
I'm not sure 10 XE certified with win server 2008
Please see:
http://download.Oracle.com/docs/CD/B25329_01/doc/install.102/b25143/TOC.htm#CIHFEBGE
Operating system one of the following 32-bit Windows operating systems:Windows 2000 Service Pack 4 or later
Windows Server 2003
Windows XP Professional Service Pack 1 or later
"" I suggest, I suggest you close your thread here any change of State of thread to answered and move it to * Forum Home "database" Oracle Database 10 g Express Edition *.
Respect of
HELIOS -
Hello
My direct application runs on the server with oracle 8i Database.
Now, I installed 11g in the same server. We do not 11g for now. All services are disabled.
The problem is that not, I can make a backup.
backup, I do it manually.
EXP
user name:
password:
ORA-03134. connection to that server is no longer valid.
Please help me to make a backup of database to 8i.Hello
You must set some env variables - in your exportscript or set them manually:
Set ORACLE_SID =
set ORACLE_HOME =
the PATH=%ORACLE_HOME\bin% value; C:\Windows\...CD
\BIN \BIN\exp... HTH
Oliver
-
Oracle BI Standard Edition One tutorial problem
Hello.
I do the tutorial from BISE1 and I have problem to the point that I have to run tcl scripts.
OMB * more: 10.2.0.1.31 output
Copyright (c) 2000, 2006, Oracle. All rights reserved.
OMB + > cd c:/oracle/bise1/tutorial/owb/tcl source allinit.tcl
c:/oracle/bise1/tutorial/owb/tcl
OMB + > source loadmaps.tcl
OMB01001: Not connected to the repository.
OMB + >
Any idea?
Thank you.
Manuel MachadoHello
I think that you did not read the tutorial carefully. Need to connect to a repository, first:OMBCONNECT
/ @ : : Kind regards
Detlef
Maybe you are looking for
-
I can't get rid of Outfox!
I've recently updated Firefox on my pc Windows 8.1. Unfortunately it automatically installed "Outfox" tv (although he was not an option to refuse). I went to my settings PC (control Panel) and uninstalled immediately. Now, whenever I open a new tab i
-
Hello world I have a X 1 3443CTO of carbon and it works well. Last night, everything was ok and I went into the BIOS and changed compatibility AHCI (don't ask me why, I was doing some tests), then I went "exit and save changes" (on the last page of t
-
I have a test WAP that is new in the box. When I console in it goes through all the initial settings, including to enter an IP address. However it just stops and does not give me a prompt start. I can telnet and web on WAP but Hyperterminal is right
-
Is it possible to change the dimensions of the stage to the editing in Adobe animate CC?
Dear community:After spendig years to forget my beloved Flash and learn to master the animate dashboard superb I'm back now to formerly Flash, lack of edge animate and experience some old restrictions in CC animate it that drive crazy me. I hope you
-
How to install without CD player?
I have a Mac without a CD player, but has received the version in retail as a gift box. Can I use the serial number of the box or I have to send the box back?