Oracle 11g XE on Open Suse 13.1
Hi all
I'm currently installing an Oracle 11 g Express on Open Suse 13.1 in a virtual machine.
I used the document as a reference for my installation: Oracle Database Express Edition
Comments:
I have a facility of Open Suse 13.1 vanilla except for these changes:
- I adjusted/etc/hostname to OpenSuse, in order to avoid special characters in the host name
- I increase the 2045 to 2049 MB SWAP partition to ensure the minimum configuration
I downloaded the RPM and extract. Then I started the installation
SUSE@openSUSE:~/downloads/Disk1 > sudo rpm - ivh oracle-xe - 11.2.0 - 1.0.x86_64.rpm
root password:
Preparing... ################################# [100%]
/var/tmp/RPM-tmp.jL4h0F: line 257: [: 18446744073709551615: integer EXPECTED]
Update / installation...
1:Oracle - xe - 11.2.0 - 1, 0 # [100%]
Execution of the post-installation steps...
You must run 'configure /etc/init.d/oracle-xe' as the root user to set up the database.
Afterwards, I ran the configure script using the default values:
SUSE@openSUSE:~/downloads/Disk1 > sudo /etc/init.d/oracle-xe Setup
Oracle Database 11g Express Edition Setup
-------------------------------------------------
This will configure the startup properties of database Oracle 11 g Express
Edition. The following questions will determine whether the database should
start the system startup and ports, it will use passwords that
will be used for database accounts. Press < enter > to accept the default values.
CTRL-C will stop.
Specify the HTTP port that will be used for Oracle Application Express [8080]:
Specify a port that will be used for the listener to the database [1521]:
Specify a password to use for database accounts. Note that the same
password will be used for SYS and SYSTEM. Oracle recommends using
Different passwords for each account database. This can be done after
initial Setup:
Confirm the password:
Want that Oracle Database 11g Express Edition to be started on boot (y/n) [o]:
From Oracle Net listener... Fact
Configuring database...
Configuration of the database failed. Look at /u01/app/oracle/product/11.2.0/xe/config/log for more details
You have an idea what is happening here? I have attached the newspapers and some additional information. Maybe you can help me?
Thank you very much in advance!
cloneDBCreation.log
Create controlfile reuse set database "XE".
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
BEGIN dbms_backup_restore.zerodbid (0); END;
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 error: 2: no such file or directory
ORA-00119: invalid specification for the system LOCAL_LISTENER parameter
ORA-00130: invalid listener address ' (ADDRESS = (PROTOCOL = TCP)(HOST=OpenSuse) (PORT = 1521))'
Create controlfile reuse set database "XE".
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
alter system enable restricted session
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
ALTER database resetlogs open "XE".
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
ALTER database rename global_name to "XE".
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
alter system switch logfile
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
change of system checkpoint
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
alter database drop logfile Group 3
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
ALTER TABLESPACE TEMP add TEMPFILE ' / u01/app/oracle/oradata/XE/temp.dbf' SIZE 20480 K REUSE AUTOEXTEND ON NEXT 640 K MAXSIZE UNLIMITED
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
Select nom_tablespace from dba_tablespaces where nom_tablespace = "USERS".
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
Select the sid, program, serial No., user name of session $ v
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
alter user sys identified by 'oracle '.
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
change the system of the user identified by 'oracle '.
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
modify the disable restricted session system
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
CloneRmanRestore.log
ORA-00119: invalid specification for the system LOCAL_LISTENER parameter
ORA-00130: invalid listener address ' (ADDRESS = (PROTOCOL = TCP)(HOST=OpenSuse) (PORT = 1521))'
Select TO_CHAR (systimestamp, 'YYYYMMDD hh') of double
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
declare
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
Select TO_CHAR (systimestamp, 'YYYYMMDD hh') of double
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
postDBCreation.log
Start
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
Created file.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 error: 2: no such file or directory
ORA-00119: invalid specification for the system LOCAL_LISTENER parameter
ORA-00130: invalid listener address ' (ADDRESS = (PROTOCOL = TCP)(HOST=OpenSuse) (PORT = 1521))'
Select ' utl_recomp_begin: ' | TO_CHAR (sysdate, ' hh) double
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
BEGIN utl_recomp.recomp_serial (); END;
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
Select ' utl_recomp_end: ' | TO_CHAR (sysdate, ' hh) double
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
postScripts.log
CREATE or REPLACE a LIBRARY dbms_sumadv_lib AS ' / u01/app/oracle/product/11.2.0/xe/lib/libqsmashr.so';
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
BEGIN dbms_datapump_utl.replace_default_dir; END;
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
Commit
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
create or replace the XMLDIR directory as ' / u01/app/oracle/product/11.2.0/xe/rdbms/xml'
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
DELETE THE ORACLE_OCM_CONFIG_DIR DIRECTORY
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
DELETE THE ADMIN_DIR DIRECTORY
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
REMOVE THE WORK_DIR DIRECTORY
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
BEGIN dbms_swrf_internal.cleanup_database (cleanup_local = > FALSE); END;
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
Commit
*
ERROR on line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session IDs: serial number 0: 0
/ etc/HOSTNAME
OpenSuse
/ etc/hosts
#
# hosts this file describes a number of host-address name
mappings for the TCP/IP subsystem. It is especially
# used at the time, when no name servers are running.
# On small systems, this file can be used instead of one
# "named" server name.
# The syntax:
#
# IP address full-qualified-Hostname short-Hostname
#
127.0.0.1 localhost
# a special IPv6 address
: 1 localhost ipv6-ipv6 loopback localhost
FE00::0 ipv6-localnet
FF00::0 ipv6-mcastprefix
FF02::1 ipv6-allnodes
FF02::2 ipv6-allrouters
FF02::3 ipv6-allhosts
Hello
1.
Please set up your domain in/etc/hosts FULL name
https://en.Wikipedia.org/wiki/Fully_qualified_domain_name
http://KB.IU.edu/data/AIUV.html
your turns to me such as CentOS and Oracle Linux.
Or take a look at the site of intrest:
http://www.Novell.com/documentation/SUSE91/SUSELinux-adminguide/HTML/ch14s03.html
127.0.0.1 localhost
192.168.85.133 OpenSuse. ??? OpenSuse
2.
To connect:
sqlplus sys /
or sqlplus system /.
Note: the password is case sensitive! or disable this as SYSDBA (sqlplus sys /
ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON IS FALSE SCOPE = BOTH;. 3. Set the password: ALTER DEFAULT PROFILE LIMIT PASSWORD_LIFE_TIME UNLIMITED; and restart stop immediately; start-up; 4. I created a /ect/profile.local file with: . /U01/app/Oracle/product/11.2.0/XE/bin/oracle_env.sh Thus, every time you start, it will set the environment. It's my Profile.local: . /U01/app/Oracle/product/11.2.0/XE/bin/oracle_env.sh ORACLE_HOME=/U01/app/Oracle/product/11.2.0/XE ORACLE_OWNER = oracle ORACLE_SID = XE LSNR = $ORACLE_HOME/bin/lsnrctl SQLPLUS = $ORACLE_HOME/bin/sqlplus Export ORACLE_HOME export ORACLE_SID export ORACLE_BASE = / u01/app/oracle export PATH = $ORACLE_HOME/bin: $PATH NLS_LANG='$ORACLE_HOME/bin/NLS_LANG.sh' ORACLE_ADMIN = / u01/app/oracle/admin / $ORACLE_SID export ORACLE_ADMIN ORACLE_FLASH = / u01/app/oracle/fast_recovery_area / $ORACLE_SID export ORACLE_FLASH ORACLE_ALERT = / u01/app/oracle/diag/rdbms/xe/XE/trace export ORACLE_ALERT ORACLE_DATA_PUMP_DIR = / u01/app/oracle/admin/XE/dpdump export ORACLE_DATA_PUMP_DIR DIAGNOSTIC_DEST = $ORACLE_HOME/log export DIAGNOSTIC_DEST TNS_ADMIN = $ORACLE_HOME/network/admin Export TNS_ADMIN 5. Recreate the DBSNMP user in the database as SYSDBA (sqlplus sys /
@/u01/app/oracle/product/11.2.0/xe/rdbms/admin/catnsnmp.sql @/u01/app/oracle/product/11.2.0/xe/rdbms/admin/catsnmp.sql Best regards.
Tags: Database
Similar Questions
-
taken Linux support to Oracle 11 g R2? what Open Suse 11.3 whith?
So, I would find a list of certified linux for Oracle (GR 11, 2 or R1) distribution... y at - it all?
I Open Suse 11.3 and I tried to install Oracle db (11 GR 2) on this subject, but it failed with the packages needed for what he...
later, I found that Open Suse is not supported for the oracle DB... is this true?
TNXOpenSuse is not certified with 11 GR 2. even as Centos, Ubuntu, Fedora...
According to the literature, SLES is supported and certified.
However, condition package OpenSuse is similar with SLES.and one thread has addressed this too
openSUSE 11.1 and 11 GR 1 material/11 GR 2 installation
Good luck
HTH -
Oracle 11g with problem of pdf cocoon.war and glassfish?
Hi all
I m install oracle 11g express on CentOS OS, oracle apex earphone 1.1.2.131.15 5.6
GlassFish v2 and cocoon 2.1.11 and connect to oracle apex glasfish works very well
Problem start when I had cocoon xml build and deploy cocoon.war on glassfish,
addition of fop_post on cocoon/fop_post (as described on http://carlback.blogspot.com/2007/03/apex-cocoon-pdf-and-more.html) but the pdf don't work!
(I've been putting all the steps on the machine of 11.2 to 32-bit suse and ubuntu 8.04 - 32 bytes and pdf open work well)
Y at - he no idea what happen whith this pdf error?
Is the problem with 64 bytes some specific parameters, with java jdk, Cocoon, glassfish, or something on apex of oracle 11g?
Gordan
Published by: useruseruser on June 20, 2011 21:49Hi Gordon,.
Once again, great to hear that!
Could you rent close this thread and mark any post useful or correct if your question is answered?Thank you
Udo
-
Migrating oracle 9i to oracle 11g but now dblink is no work
First of all, sorry for my English.
Achieved an export from the old to the new db_links and now do not work.
Oracle 9i - work
13:52:45 card > @banco
Mostra user, instance, e start time host - pressure enter para continue
E the USER 'SYSTEM '.
INSTANCE_NAME HOST_NAME STATUS STARTUP_TIME
---------------- ---------------------------------------------------------------- ------------ --------------
atlas1 card OPEN 01/23/12 17:53
Decorrido: 00:00:00.03
BANNER
----------------------------------------------------------------------------------------------------
Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
PL/SQL Release 9.2.0.8.0 - Production
CORE Production 9.2.0.8.0
AMT for Linux: Version 9.2.0.8.0 - Production
NLSRTL Version 9.2.0.8.0 - Production
Decorrido: 00:00:00.03
13:52:46 card >
13:52:59 card > @dblink
Informed o valor para db_link: scapr
OWNER, DB_LINK CREATED USERNAME HOST
-------------------- ------------------------------ -------------------- ------------------------------ --------------
SCAPROD.PANVEL.COM.BR PUBLIC LINK SCA 17/11/11 14:35
Decorrido: 00:00:00.03
13:53:03 card > desc dual@scaprod
Nome
-------------------------------------------------------------------------------------------------------------------------
MODEL
13:53:07 card > desc [email protected]
Nome
-------------------------------------------------------------------------------------------------------------------------
MODEL
13:53:16 card >
13:53:16 card > show the global setting
VALUE OF TYPE NAME
------------------------------------ ----------- -------------
global_context_pool_size string
global_names boolean FALSE
13:53:40 card >
Oracle 11g - does not, a little work with the full name of the db_link:
13:53:57 nouveaute11 > @banco
Mostra user, instance, e start time host - pressure enter para continue
E the USER 'SYSTEM '.
INSTANCE_NAME HOST_NAME STATUS STARTUP_TIME
---------------- ---------------------------------------------------------------- ------------ -----
aquarius card OPEN 01/26/12-13:42
Decorrido: 00:00:00.01
BANNER
----------------------------------------------------------------------------------------------------
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE Production 11.2.0.3.0
AMT for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
Decorrido: 00:00:00.04
13:53:58 nouveaute11 >
13:54:12 nouveaute11 > @dblink
Informed o valor para db_link: scapr
OWNER, DB_LINK CREATED USERNAME HOST
-------------------- ------------------------------ -------------------- ---------------------------
SCAPROD.PANVEL.COM.BR PUBLIC LINK SCA 26/01/12 13:02
Decorrido: 00:00:00.03
13:54:16 nouveaute11 > desc [email protected]
Nome
---------------------------------------------------------------------------------------------------
MODEL
13:54:23 nouveaute11 > desc dual@scaprod
ERROR:
ORA-02019: description of conexao para o banco dados não localizada remote
13:54:26 nouveaute11 >
13:54:41 nouveaute11 > display the global setting
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------
global_context_pool_size string
global_names boolean FALSE
global_txn_processes integer 1
13:54:45 nouveaute11 >
Any help? :)
Thank you!vitorjr81 wrote:
As you can see the db_link is functional, but just with the name and surname:13:54:16 nouveaute11 > desc [email protected]
Name MODEL13:54:23 nouveaute11 > dual@scaprod desc
ERROR:
ORA-02019: description of conexao para o banco dados não localizada remote13:54:26 nouveaute11 >
13:54:41 nouveaute11 > display the global setting
VALUE OF TYPE NAME
-chain global_context_pool_size
global_names boolean FALSE
global_txn_processes integer 1Do as below and post the results here
SQL> select global_name from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- V112 SQL>
-
I installed oracle 11g xe and home page did not come to the top. same thing happens when I installed oracle 10g xe. The homepage can be connected and run sql command line is also not not opening. I checked in services.msc that OracleServiceXE and OracleXETNSListener is running.
Firewall is disabled. Using XP SP3. Already had Oracle 8i and uninstalled and deleted all remaining sound files manually.
I opened cmd and typed-
C:\ > SQLPLUS / as sysdba startup
I got this result-
SQL > startup ORA-01078: failure in the treatment of the system ORA-01565 settings: error in the identification of the files 'C:\oraclexe\app\oracle\product\10.2.0\serv er\dbs/spfileXE.ora' ORA-27041: could not open the OSD-04002 file: could not open the file S/O-error: (OS 2) the system cannot find the file specified. SQL > disconnected
I typed-
C:\ > telnet localhost 8080
I got this result-
Connecting to localhost... Could not open connection to the host, on port 8080: connection failed
I did not the configuration changes to all files .ora and nothing is listening on port 8080. I deleted IE (off the frustration of slow speed), and only have Chrome, Firefox n Safari on my system. Does it matter?
I also disabled WLAN n DB restarted but of no use... Check the LSNRCTL status given.
LSNRCTL > status
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - production
ction
Start date December 2, 2011 10:00:30
Uptime 0 days 0 h 21 min 31 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Default Service XE
Listener parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener log file C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Summary of endpoints listening...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = guddus-comp)(PORT=1521)))
Summary of services...
Service 'CLRExtProc' has 1 instance (s).
Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
Service 'PLSExtProc' has 1 instance (s).
Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
The command completed successfullyFor the removal of Win services, find out about 'sc' (sc delete).
Path indicators system of additional Oracle installs (ora92...). Who installs is 'in progress' and who is uninstalled?
What happens if you just to open a command prompt and run oradim?
What is the oracle.key file exists in dir\bin House xe? What is its content?
-
Problem with Oracle 9i and Oracle 11g
Hello
I have 2 Installation of Oracle: Oracle 9i client and Server Oracle 11.2
Oracle 9i to: C:\oraclient9\
Oracle 11g: C:\app\a.l\product\11.2.0\
I have an application that has to connect to Oracle via ODBC, but whenever I try to connect looking for odbc Oracle 9i and I get this error:
ORA-12541: TNS no listener
If I try to boot with sqlplus to: start-> run-> sqlplusw get Oracle 9i version
If I'm running sqlplus from start-> program-> Oracle 11-> I can connect properly.
If I try to create a new ODBC it always plug the Oracle version 9i.
I tried:
Set ORACLE_HOME=C:\app\a.l\product\11.2.0\dbhome_1
Set ORACLE_SID = ORCL
but when I try: sqlplus / as sysdba I get this error:
14 error initializing SQL * more
SP1 file < lang > .msb not found message
SP2-0750: you may need to set ORACLE_HOME in your Oracle software directory
If I try to boot with sqlplus to: start-> run-> sqlplusw get Oracle 9i version with the error:
ORA-12541: TNS no listener
Variables environment variables in the path are:
C:\oraclient9\bin; C:\Program Files\Oracle\jre\1.3.1\bin; C:\Program Files\Oracle\jre\1.1.8\bin; C:\app\a.l\product\11.2.0\dbhome_1\BIN; C:\app\a.l\product\11.2.0\dbhome_1\bin;%SystemRoot%\System32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SystemRoot%\system32\WindowsPowerShell\v1.0\; C:\Program Files\Sybase\SQL Anywhere 9\win32. C:\Program Files\Sybase\Shared\win32; C:\Program Files\Sybase\SQL Anywhere 9\drivers; C:\Program Files\Sybase\Shared\Sybase 4.2 Central; c:\Program Files\Microsoft SQL Server\90\Tools\binn\; C:\Progra~1\XRay
tnsnames 11g:
tnsnames 9i:# tnsnames.ora Network Configuration File: C:\app\a.l\product\11.2.0\dbhome_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. LISTENER_ORCL = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) ORACLR_CONNECTION_DATA = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) ) (CONNECT_DATA = (SID = CLRExtProc) (PRESENTATION = RO) ) ) ORCL = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl.domopenplan.local) ) )
11g listener.ora:# TNSNAMES.ORA Network Configuration File: C:\oraclient9\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORCL.DOMOPENPLAN.LOCAL = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = orcl.domopenplan.local) ) )
Do you have any idea how I can create a new ODBC to connect to Oracle 11g?# listener.ora Network Configuration File: C:\app\a.l\product\11.2.0\dbhome_1\network\admin\listener.ora # Generated by Oracle configuration tools. SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = CLRExtProc) (ORACLE_HOME = C:\app\a.l\product\11.2.0\dbhome_1) (PROGRAM = extproc) (ENVS = "EXTPROC_DLLS=ONLY:C:\app\a.l\product\11.2.0\dbhome_1\bin\oraclr11.dll") ) (SID_DESC = (GLOBAL_DBNAME = orcl.domopenplan.local) (SID_NAME = orcl.domopenplan.local) (ORACLE_HOME = C:\app\a.l\product\11.2.0\dbhome_1) (PROGRAM = extproc) (ENVS = "EXTPROC_DLLS=ONLY:C:\app\a.l\product\11.2.0\dbhome_1\bin\oraclr11.dll") ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.103)(PORT = 1521)) ) ) ADR_BASE_LISTENER = C:\app\a.l
Thanks in advance!opening for the system control window Server DB & question OS command sequence
lsnrctl status
set
lsnrctl serviceCOPY orders & results then PASTE all come back here
-
Hello
I set up a new server with Windows 8r2. Install Oracle 11 g 64 bit.
Mounted 10 32-bit Desktop windows forms [32-bit] Version 6.0.8.11.3 (Production).
I am able to connect to Oracle 9i. but I want to connect to Oracle 11g
Are there measures where I can solve my problem.
already had made the following changes to the server
C:\ > sqlplus/nolog
SQL > connect / as sysdba
Conectado.
SQL > shutdown immediate
SQL > startup restrict
SQL > alter database character set internal_use UTF8;
SQL > shutdown immediate
SQL > startup
Under sqlnet.ora I changed
NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)
SQLNET. ALLOWED_LOGON_VERSION_SERVER = 8
SQLNET. ALLOWED_LOGON_VERSION_SERVER = 8
SQLNET. ALLOWED_LOGON_VERSION_CLIENT = 8
I'm still not able to connect.
Sandy
1. what error message do you receive forms 6i when you can not connect
2. what level of Forms 6i patch do you have? A more recent patch level may be required.
Tony
-
That means 1z0-117 oracle 11g sql tuning now say it includes v12 addition v11
Hello
I did the 1z0-117 sql tuning review once.
Not too far away.
I studied under and turned off for a while.
I anticipate taking in 1 month.
However, I just noticed that the oracle site says 1z0-117 also said that v12 is also included for consideration:
Oracle 11g sql tuning.
It makes no sense at all.
Roger
However, I just noticed that the oracle site says 1z0-117 also said that v12 is also included for consideration:
Oracle 11g sql tuning.
Unless you are looking for something I'm not, what actually is the 1Z0-117 page says: "validated against: review has been validated against Oracle Database 11g Release 2 version 11.2.0.1.0 and database Oracle 12 c 12.1.0.1.0"
What they actually mean by it is that someone went through all the issues and and asked the question "is still a relevant issue for the release of 12 c to Oracle?'." " If they find issues that are not valid because of an update/change, then the question will be removed from review (or changed) so that someone who has used 12 c but not 11 g will not at a disadvantage.
This is * No * means that Oracle has added questions to the review of the capabilities that were introduced in version 12 c.
-
Oracle 11g r1 license work for oracle 11g r2?
Hello
We have license of oracle 11g r1 then do we need to purchase a separate license to upgrade to 11g r2?
Hello
No, no need to buy a separate license to upgrade to 11g r2 just improved it.
Amatu Allah.
-
How can I create a list of choices for the search bit in Oracle 11g ADF fields?
Hi Experts,
Please inform how to add some selection list or drop downs on the pane search Oracle 11g ADF.
I have a requirement to create a list of choices for the search store field. # Please notify.
Thank you
David Selvaraj
You can create a view based on a static list object and attach it to your attribute as lov-driven model.
Dario
-
Shape how Hide bar by default in oracle 11g
Hi people of genius.
I want to just hide the bar window by default in forms of oracle 11g. Please advise me how to hide who I had him marked in red below.
Thank you
This thread appears to be a bit confusing. You try to delete the entry 'Window' menu or the bar together, which includes the Oracle logo? If you try to remove the whole bar AND that you use the latest version of forms (11.1.2.2), you can use the new applet parameter guiMode. This new feature of 11 GR 2 allows to hide the various window dressings. See the Deployment Guide forms 11.1.2 for more details on how to use this new feature:
http://docs.Oracle.com/CD/E48391_01/doc.11120/e24477/basics.htm#FSDEP759
-
use of temporary space in oracle 11g rac
Hello
Oracle version: oracle 11g r2
OS: linux
storage: asm on exadata
Please help us understand the use of the temp
{code}
SQL > set linesize 1000
SQL > set pagesize 1000
SQL > col USERNAME format a20
SQL > col SPID format a10
SQL > col MODULE format a30
SQL > col PROGRAM format a30
SQL > SELECT s.sid, s.serial #, s.username
2, p.spid, s.module, p.program
3, SUM (su.blocks) * tbsp.block_size/1024/1024 mb_used
4, su.tablespace
5. FROM v$ sort_usage su
6, v$ session s
dba_tablespaces tbsp
7, $v 8 p process
9 WHERE su.session_addr = s.saddr
10 AND su.tablespace = tbsp.tablespace_name
11 AND s.paddr = p.addr
GROUP 12 OF
13 s.sid, s.serial #, s.username, s.osuser, p.spid, s.module,.
14 p.program, tbsp.block_size, su.tablespace
15 ORDER BY s.sid;USERNAME SID SERIAL # SPID MODULE PROGRAM MB_USED TABLESPACE
---------- ---------- -------------------- ---------- ------------------------------ ------------------------------ ---------- -------------------------------
11 2092 DBSNMP 2861 emagent_SQL_oracle_database Oracle @ [email protected] 8 TMP4SQL > select * from v$ temp_space_header;
FILE_ID BYTES_USED, BYTES_FREE BLOCKS_FREE RELATIVE_FNO BLOCKS_USED NOM_TABLESPACE
------------------------------ ---------- ---------- ----------- ---------- ----------- ------------
TMP1 2 + 12 222274816 33554432 2048 1024 3.6418E
TMP3 4 + 11 19283968 75497472 4608 1024 3.1595E
TMP4 5 + 11 19687936 0 0 1024 3.2257E
TMP5 6 + 13 688638464 0 0 1024 1.1283E{code}
Why isn't bytes_used reclaim as only 8 MB is currently using
Thank you
PMP
I wanted to tell temp is never off allocated. So, if a 'bad' query explodes temp. the only thing you can do is to create a new and drop the old one.
11 GB temp is clearly ridiculous. Usually, this is caused by the merge join Cartesian paths in your instructions.
-----------
Sybrand Bakker
Senior Oracle DBA
-
How interrogate a user affected temp and tableapce default tablespace in oracle 11g?
I have this SUNNY user on my DB. Now, I want to know how to query an affected user temp and tableapce default tablespace in oracle 11g?
I tried Google, but no luck. can anyone help?
Select the name of user, USER_USERS, temporary_tablespace from dba_users where username = "SUNNY";
or
Select the name of user, USER_USERS, temporary_tablespace from user_users where username = "SUNNY";
-
Hi all
am an Oracle 11 g RAC OCÉ, plan to write oracle 11g CMO, can anyone suggest how to proceed?
How the review will be... is this objective or another criterion?
How to buy the right? and how much cost in India?
anytime I write or Oracle Corp. will decide on the dates etc...?
Please guide me the details.
Thank you
Sam.
The 11g COM is different from all the other reviews. This is a 2 day practical laboratory exercise. You are given to an Oracle server and need to perform different tasks, solve problems, etc.
The review of the CMO is only given to a relatively small number of times throughout the year. Strictly speaking, there are a lot of times, but they are spread all over the world, so many times at a location any where near you will be weak - maybe one or two a year.
In addition to the exam, you must also take two practical courses acceptable to Oracle. You can find more information, including the price in your area by reading and following the links available at the following ADDRESS:
-
Is it possible to get the data in the dump views in oracle 11g file?
Hi all
I am using oracle 11G with developer PLSQL .is there a way to get the dump file views data. I saw there is an option in the tool to export the table data in the dumpster, but here, I'm not able to see the view names get extracted. If anyone can help me with that?
Best regards
GK
View has no data. View is just a stored SELECT statement.
Maybe you are looking for
-
How to retrieve contacts lost without backup?
I and my father use same account iCloud for our iPhones for a long time... I created a new account iCloud on her phone... Wen, as I did, that its all contacts were lost... then I disconnected and connected with our old iCloud account common... when I
-
Firefox 4 does not appear newly installed plugins navigator.plugins array
In Firefox 4, I'm trying to detect with javascript whether a certain plugin is installed by looking in the navigator.plugins array. (https://developer.mozilla.org/en/DOM/window.navigator.plugins) It seems that the newly installed in Firefox 4 plugins
-
A system restore to get my back video clips that have been deleted by mistake
I think I downloaded the upgrades of Windows around 22/06/11. Unfortunately, 06/24/11, I restored my computer to the 20/06/11, thinking I could get viideo clips back I deleted mistakently. Now that the clips were recovered, I can not open then. Is
-
WINDOWS XP3 unavailable to replace WGAN said imitations.
It seems that MS have abandoned the manufacture of XP3, told by one of their local/regional office. They have no stocks. But the software is awailable with dealers / stores sharpened. What guarantee we have when we buy them, or, history is repeating
-
Error using rediness system update tool
I have a system of 32-bit of compaq with windows vista sp2 with many problems such as freezing of updates of the screens operating no installation and bruises but the problem I need to help with is when I run that the redness update system tool bar i