taken Linux support to Oracle 11 g R2? what Open Suse 11.3 whith?

Similar Questions

• Host kernel taken Linux supported for vmware Server 2?

  VMware is advertising that VMware server can be installed in 64 bit, Linux, but that's not true. I can't install it in one of my 64-bit Linux host. Only legacy distributions are supported. I use openSuse 11.2 64 bit or Ubuntu 9.10.

  Is it true that VMware is NOT recent Linux kernels of Pentecost compatible 2.6.3x? Only legacy host kernels Linux is supported?

  When this catastrophic situation will be fixed in the new version of Pentecost?

  None of the patches to install VMserver or workstation on more recent than AFAIK 2.6.26 kernels are officially released by VMware.

  If you really think that you need a core of bleeding edge, you must use these patches not supported.

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Oracle 11g XE on Open Suse 13.1

  Hi all

  I'm currently installing an Oracle 11 g Express on Open Suse 13.1 in a virtual machine.

  I used the document as a reference for my installation: Oracle Database Express Edition

  Comments:

  I have a facility of Open Suse 13.1 vanilla except for these changes:

  • I adjusted/etc/hostname to OpenSuse, in order to avoid special characters in the host name
  • I increase the 2045 to 2049 MB SWAP partition to ensure the minimum configuration

  I downloaded the RPM and extract. Then I started the installation

  SUSE@openSUSE:~/downloads/Disk1 > sudo rpm - ivh oracle-xe - 11.2.0 - 1.0.x86_64.rpm

  root password:

  Preparing...                          ################################# [100%]

  /var/tmp/RPM-tmp.jL4h0F: line 257: [: 18446744073709551615: integer EXPECTED]

  Update / installation...

  1:Oracle - xe - 11.2.0 - 1, 0 # [100%]

  Execution of the post-installation steps...

  You must run 'configure /etc/init.d/oracle-xe' as the root user to set up the database.

  Afterwards, I ran the configure script using the default values:

  SUSE@openSUSE:~/downloads/Disk1 > sudo /etc/init.d/oracle-xe Setup

  Oracle Database 11g Express Edition Setup

  -------------------------------------------------

  This will configure the startup properties of database Oracle 11 g Express

  Edition.  The following questions will determine whether the database should

  start the system startup and ports, it will use passwords that

  will be used for database accounts.  Press < enter > to accept the default values.

  CTRL-C will stop.

  Specify the HTTP port that will be used for Oracle Application Express [8080]:

  Specify a port that will be used for the listener to the database [1521]:

  Specify a password to use for database accounts.  Note that the same

  password will be used for SYS and SYSTEM.  Oracle recommends using

  Different passwords for each account database.  This can be done after

  initial Setup:

  Confirm the password:

  Want that Oracle Database 11g Express Edition to be started on boot (y/n) [o]:

  From Oracle Net listener... Fact

  Configuring database...

  Configuration of the database failed.  Look at /u01/app/oracle/product/11.2.0/xe/config/log for more details

  You have an idea what is happening here? I have attached the newspapers and some additional information. Maybe you can help me?

  Thank you very much in advance!

  cloneDBCreation.log

  Create controlfile reuse set database "XE".

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  BEGIN dbms_backup_restore.zerodbid (0); END;

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  ORA-01034: ORACLE not available

  ORA-27101: shared memory realm does not exist

  Linux-x86_64 error: 2: no such file or directory

  ORA-00119: invalid specification for the system LOCAL_LISTENER parameter

  ORA-00130: invalid listener address ' (ADDRESS = (PROTOCOL = TCP)(HOST=OpenSuse) (PORT = 1521))'

  Create controlfile reuse set database "XE".

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  alter system enable restricted session

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  ALTER database resetlogs open "XE".

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  ALTER database rename global_name to "XE".

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  alter system switch logfile

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  change of system checkpoint

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  alter database drop logfile Group 3

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  ALTER TABLESPACE TEMP add TEMPFILE ' / u01/app/oracle/oradata/XE/temp.dbf' SIZE 20480 K REUSE AUTOEXTEND ON NEXT 640 K MAXSIZE UNLIMITED

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  Select nom_tablespace from dba_tablespaces where nom_tablespace = "USERS".

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  Select the sid, program, serial No., user name of session $ v

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  alter user sys identified by 'oracle '.

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  change the system of the user identified by 'oracle '.

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  modify the disable restricted session system

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  CloneRmanRestore.log

  ORA-00119: invalid specification for the system LOCAL_LISTENER parameter

  ORA-00130: invalid listener address ' (ADDRESS = (PROTOCOL = TCP)(HOST=OpenSuse) (PORT = 1521))'

  Select TO_CHAR (systimestamp, 'YYYYMMDD hh') of double

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  declare

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  Select TO_CHAR (systimestamp, 'YYYYMMDD hh') of double

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  
  

  postDBCreation.log

  Start

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  Created file.

  ORA-01034: ORACLE not available

  ORA-27101: shared memory realm does not exist

  Linux-x86_64 error: 2: no such file or directory

  ORA-00119: invalid specification for the system LOCAL_LISTENER parameter

  ORA-00130: invalid listener address ' (ADDRESS = (PROTOCOL = TCP)(HOST=OpenSuse) (PORT = 1521))'

  Select ' utl_recomp_begin: ' | TO_CHAR (sysdate, ' hh) double

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  BEGIN utl_recomp.recomp_serial (); END;

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  Select ' utl_recomp_end: ' | TO_CHAR (sysdate, ' hh) double

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  postScripts.log

  CREATE or REPLACE a LIBRARY dbms_sumadv_lib AS ' / u01/app/oracle/product/11.2.0/xe/lib/libqsmashr.so';

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  BEGIN dbms_datapump_utl.replace_default_dir; END;

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  Commit

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  create or replace the XMLDIR directory as ' / u01/app/oracle/product/11.2.0/xe/rdbms/xml'

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  DELETE THE ORACLE_OCM_CONFIG_DIR DIRECTORY

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  DELETE THE ADMIN_DIR DIRECTORY

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  REMOVE THE WORK_DIR DIRECTORY

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  BEGIN dbms_swrf_internal.cleanup_database (cleanup_local = > FALSE); END;

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  Commit

  *

  ERROR on line 1:

  ORA-01034: ORACLE not available

  Process ID: 0

  Session IDs: serial number 0: 0

  / etc/HOSTNAME

  OpenSuse

  / etc/hosts

  #

  # hosts this file describes a number of host-address name

  mappings for the TCP/IP subsystem.  It is especially

  # used at the time, when no name servers are running.

  # On small systems, this file can be used instead of one

  # "named" server name.

  # The syntax:

  #

  # IP address full-qualified-Hostname short-Hostname

  #

  127.0.0.1 localhost

  # a special IPv6 address

  : 1 localhost ipv6-ipv6 loopback localhost

  FE00::0 ipv6-localnet

  FF00::0 ipv6-mcastprefix

  FF02::1 ipv6-allnodes

  FF02::2 ipv6-allrouters

  FF02::3 ipv6-allhosts

  Hello

  1.

  Please set up your domain in/etc/hosts FULL name

  https://en.Wikipedia.org/wiki/Fully_qualified_domain_name

  http://KB.IU.edu/data/AIUV.html

  your turns to me such as CentOS and Oracle Linux.

  Or take a look at the site of intrest:

  http://www.Novell.com/documentation/SUSE91/SUSELinux-adminguide/HTML/ch14s03.html

  127.0.0.1 localhost

  192.168.85.133 OpenSuse. ???  OpenSuse

  2.

  To connect:

  sqlplus sys / as sysdba

  or

  sqlplus system /.

  Note: the password is case sensitive!

  or disable this as SYSDBA (sqlplus sys / as sysdba):

  ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON IS FALSE SCOPE = BOTH;.

  3.

  Set the password:

  ALTER DEFAULT PROFILE LIMIT PASSWORD_LIFE_TIME UNLIMITED;

  and restart

  stop immediately;

  start-up;

  4.

  I created a /ect/profile.local file with:

  . /U01/app/Oracle/product/11.2.0/XE/bin/oracle_env.sh

  Thus, every time you start, it will set the environment.

  It's my Profile.local:

  . /U01/app/Oracle/product/11.2.0/XE/bin/oracle_env.sh

  ORACLE_HOME=/U01/app/Oracle/product/11.2.0/XE

  ORACLE_OWNER = oracle

  ORACLE_SID = XE

  LSNR = $ORACLE_HOME/bin/lsnrctl

  SQLPLUS = $ORACLE_HOME/bin/sqlplus

  Export ORACLE_HOME

  export ORACLE_SID

  export ORACLE_BASE = / u01/app/oracle

  export PATH = $ORACLE_HOME/bin: $PATH

  NLS_LANG='$ORACLE_HOME/bin/NLS_LANG.sh'

  ORACLE_ADMIN = / u01/app/oracle/admin / $ORACLE_SID

  export ORACLE_ADMIN

  ORACLE_FLASH = / u01/app/oracle/fast_recovery_area / $ORACLE_SID

  export ORACLE_FLASH

  ORACLE_ALERT = / u01/app/oracle/diag/rdbms/xe/XE/trace

  export ORACLE_ALERT

  ORACLE_DATA_PUMP_DIR = / u01/app/oracle/admin/XE/dpdump

  export ORACLE_DATA_PUMP_DIR

  DIAGNOSTIC_DEST = $ORACLE_HOME/log

  export DIAGNOSTIC_DEST

  TNS_ADMIN = $ORACLE_HOME/network/admin

  Export TNS_ADMIN

  5.

  Recreate the DBSNMP user in the database as SYSDBA (sqlplus sys / as sysdba):

  @/u01/app/oracle/product/11.2.0/xe/rdbms/admin/catnsnmp.sql

  @/u01/app/oracle/product/11.2.0/xe/rdbms/admin/catsnmp.sql

  Best regards.

• database Oracle 10 g express edition 64 bit for linux 64-bit oracle

  Can I find somewere where I downlod of oracle database 10g 64 bit for linux 64-bit oracle XE
  
  Please help me.
  
  I really need this database!
  
  Thank you
  
  Denio
  
  Published by: 968495 on 10/30/2012 10:17

  All the oracle 10g is under extended support, version 10g XE was torn off in the download pages at any time 10g has been extended.

  Will probably not be able to get a download of any place under oracle.com, but it could be a few sites still harboring. Try google.

• Why isn't the Xbox HD player - always taken DVD supported by the Xbox console?

  Why isn't the XBox HD player - always taken DVD supported by the XBox console?

  Hello

  See the XBox Forums.

  Rob - SpiritX

• Taken MIB supported by RVS4000

  Someone at - it a list of versions taken MIB supported by RVS4000? I could not find anywhere in the product packaging or the cisco Web site.

  Please check this.

  https://supportforums.Cisco.com/docs/doc-10276

• Roadmap for Adobe Creative Cloud Linux Support

  Dear Adobe Creative cloud community,

  There have been several threads back years ask for Adobe Creative Suites Linux support.

  
  This being the year 2016, I suggest that it is time to seriously consider to support Linux and provide the community with a roadmap for this support.

  Could us focus the discussions happening in society on this subject? Are there plans? What are some basic terms that you intend for it to be implemented?

  From the point of view of the outside, there would be two major milestones to hit with this one:

  Step 1: CC Adobe wine rack

  Step 2: Adobe CC Native of Linux application

  Please review the potential market and stay on top of the three major free software: Linux, Mac and Windows.

  Thank you!

  If Adobe has not responded to a message in 2012 creative for Linux (Ubuntu) cloud by announcing plans to support Linux, I seriously doubt that as a new request will get Adobe to change course

• XMLFile parameter is not supported by Oracle APEX, please use the setXMLFile() method

  "XMLFile parameter is not supported by Oracle APEX, please use the setXMLFile() method.

  I created a test web app in apex.oracle.com to try a few things. I created a Flash 2D pie chart in a Web page, and it seems to make very well. But before rendering, I get the error message above, on the region of graph for 1-2 seconds.

  Can anynone tell me what means the error message above and why I'm getting this. I do not use a custom XML part. Has not changed the default settings of the chart area.

  I could see above the error appearing clearly since the apex.oralce.com is so slow... and graphics region takes awhile to load. Otherwise I could not have noticed. It happens in the IE8 and Google chrome.

  Oralce Apex 4.2.5.00.006 (https://apex.oracle.com)

  Google Chrome 34.0.01847.116

  Internet Explorer 8.0.6001.19518

  Can anyone help please. I'll try to become a test application setup dispalying this awhile earlier error message.

  I used HTML5 graphics in apex 4.2.0.00.27 in my office in my real application workspace. Most of my users still use IE8. HTML5 graphics all appeared well in their IE8 browser. One fine day, some parameters must be changed by my network administrator or soemthing else could have happened. I have no idea. My webapplication HTML5 graphics disappear IE8 users. IE9 users had no problem. I contacted our IT support staff of any changes to security settings that day, or earlier. Absolutely no help from my frustration. I have to change maps of my application (only about 6 of them) to the Flash graphics to overcome this obstacle. This is the story behind why I use Flash cards. If anyone has experienced a similar problem in IE8 HTML5 graphics please shed any light for me... This problem may be nothing to do with the "XMLFile parameter error message', but I'm not sure.

  You strike again BUG introduced with Oracle Application Express 4.2.5

  http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/Apex-425-known-issues-2186292.html

  18601802 - ANYCHART XMLFILE WARNING DISPLAYED BEFORE FLASH GRAPHICS RENDERING when Flash graphics that take a long time to make, the user can see the following warning message appears briefly "XMLFile parameter only is not supported by Oracle APEX, please use setXMLFile() method.» The table will be always delivered. Solution: Please advise end-users to ignore the message.

• support of Oracle

  Hi all
  
  I support valid oracle account, I have a problem and that I posted here my problems but there is no one to help me
  How to solve, but always Member here help me solve my problems, it is my first time
  to use the oracle support, what to do, just create new service request and say what I have to oracle
  also I want oracle response on my email not on my support oracle due to is my email account manager
  and I don't want to change it (my oracle support account) just to answer on my email.

  861100 wrote:
  Hi all

  I support valid oracle account, I have a problem and that I posted here my problems but there is no one to help me

  Well, this forum is NOT "oracle support. It is simply a forum for oracle users. Oracle merely provides the platform here.

  How to solve, but always Member here help me solve my problems, it is my first time
  to use the oracle support, what to do, just create new service request and say what I have to oracle

  Yes.

  also I want oracle response on my email not on my support oracle due to is my email account manager
  and I don't want to change it (my oracle support account) just to answer on my email.

  Why would you not get an account under your own email address? The support contract is for your company. Your company can authorize as many accounts as he wants to use the ICS. Every DBA should have its own My Oracle Support account, under CSI of their organization.

  "Oracle Support", for which you indicate that you have an account, is at https://support.oracle.com

• support of Oracle information

  Hi all
  
  can you please tel me how to get my profile in support of oracle
  I need to know for a number of license we have in oracle how to get this, ex: oracle 11g, application server 10g rac... .etc
  
  
  Thank you very much

  Check
  http://www.Oracle.com/me/corporate/contact/index.html

• "Your browser is not supported by Oracle BI Presentation Services"

  Hello
  
  I installed obiee11.1.1.5 on windows 7 and I'm using the latest version of Firefox 12.0. When I try to open analytical through firefox12.0 I get warning as "your browser is not supported by Oracle BI Presentation Services" and it opens in Internet Explorer but graphics do not appear. Can someone tell me the solution for this?
  
  Published by: Uma on April 26, 2012 05:24

  Hey Uma,

  you have administrator privileges? If not try to run the FF with the administrator id - right click on the file exe and say "Run as Administrator" and then type "subject: config" without the quotes in the FF homepage, then you should be good and go forward with the rest of the steps.

  Thank you
  RM

• Transparent data encryption are supported with Oracle Advanced Replication?

  Which version of DB, TDE supported with Oracle Advanced Replication?

  user939188 wrote:
  Which version of DB, TDE supported with Oracle Advanced Replication?

  "Materialized views do not support columns that have been encrypted by using transparent data encryption."

  Source - http://oracle.su/docs/11g/server.112/e10706/repmview.htm

• What is the life expectancy of the Support of Oracle E-Business Suite extended-release

  What is the life expectancy of the Support in Oracle E-Business Suite 11.5.10 extended release.
  
  Up to what time it is supported.
  
  
  Kind regards.

  Y at - it all any date deadline for this support extended?

  According to the pdf document that is referenced in the links above, it is "Nov" 2013.

  Life Support policy Oracle - Oracle Applications
  http://www.Oracle.com/us/support/library/lifetime-support-applications-069216.PDF

  Thank you
  Hussein

• Oracle streams heterogeneous Support (non-Oracle and Oracle databases) envi

  Oracle streams heterogeneous Support (non-Oracle and Oracle databases) environments?
  
  It is possible to move data from Oracle to DB2 using Oracle Streams?

  Hello

  Visit this link

  http://download-West.Oracle.com/docs/CD/B28359_01/server.111/b28322/hetero.htm

  Kind regards
  Deepak

• My iPhone 4 stopped working yesterday, it frustrated me because I just a call, I intended to take it to get it fixed, but my sister advised I check the support of the community and guess what? It worked! Am so excited, that I followed the instructions of

  My iPhone 4 stopped working yesterday, it frustrated me because I just a call, I intended to take it to get it fixed, but my sister advised I check the support of the community and guess what? It worked! Am so excited, I followed the instructions of the Mac, I pressed the Start button and the button operation at the same time and the magic took place, am so so excited. THANK YOU MAC!

  Glad that your phone is working again.

  What you were doing by pressing the button home and sleep for 10 seconds, until the Apple logo came back, is called "force restart '.

  You won't lose data by doing this, but it can cure a few glitches. It is usually the last thing to try before you restore the phone to factory again or visit an Apple Retail Store or Apple authorized service provider, where your phone does not at all.

  If your iPhone is not responding or won't turn on - Apple Support