Oracle checks only opening and closing of the session

Similar Questions

• Computer beeps the opening and closing of the session.

  A few weeks ago, that I started to notice that when I logged in to Windows (not at startup, but when connecting), when I logged on Windows, or when I locked the screen, I received three beeps through the speakers, not the mobo. These are in addition to any other sound is played by Windows at this time. The computer works fine, and all "systems" are looking good. Yet once, is not beep codes that you would hear at the start, it seems to happen at the opening session, disconnection and screen lock. Any ideas on what could be the cause?

  Thanks for the reply. It might be a programs or drivers installed on your computer that is causing the problem.

  Please run your computer in safe mode and check if problem still persists. To start your computer in safe mode. To do this, please follow the steps below:

  1. restart your computer.
  2. press and hold F8 before the Windows logo appears.
  3. Select safe mode using the arrow keys, then press on Enter.

  Let us know how it goes.

• How to stop windows during the opening and closing of the discoloration

  Windows until today used to break open and closed but now that they fade in and out.  Is there a setting that would avoid this?

  Hi Dmkg,

  1. when exactly this problem occurs (it is the opening of any application or is it when the computer starts and stops)?
  2. Since when are you facing this problem?
  3. any recent change in software/hardware on your computer?

  Method 1:

  Try to perform a system restore to restore the work correctly the settings

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
         
  Method 2:
     
  Try the following steps:

  a. click on Control Panel.
  b. click view by: large icons.
  c. click on "Performance Information and tools".
  d. click on adjust 'Visual effects '.
  e. There will be three points on the line indicating the word "Bland" as the first string of characters on each line.
  f. uncheck the box in front of each of these three lines and then 'OK' everything and regulate
   
  Also be sure to animate windows when reduced and enlarged is checked
      
  Method 3:

  I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Mixtures: Difference between open and closed, change the spine

  OK, just had a breakthrough today on the gradient tool.
  
  The difference between closed and open is critical when you want to change a spine mix, as it curved. Between open paths, he has no spine indicated when a mixture is created. Never noticed this? Between the closed paths, there is a spinal column, which can be modified, making as it curved. Now the trick is how to change a spine with paths open when there is no spinal column shown. Found out today that starting with a closed path, segments can be removed to make the open path, then the spine can be changed and maintained the State of open path!
  
  It of a big bug in Illustrator and makes no sense to me. Eager to Adobe to fix this in the next major release. Hope this helps anyone struggling with this problem.

  Create your open paths and create a thorn. This must have no shot and no fill. Then select your paths and the spinal column, and then create the mix. I guess that create you it via the menu is not clicking with the gradient tool.

• Firefox only opens and indicates that the personal information settings do not exist or are not accessible

  Firefox does not open for me to make changes in order to correct the problem. The error box simply States that personal information settings do not exist or are inaccessible. This isn't a problem on this computeror I wouldn't be able to send this message.

  This is usually caused by a problem with the file profiles.ini and the profile marked as the default value = 1 is no longer present on the hard drive.

  • Windows: '% AppData%\Mozilla\Firefox\ '.
  • Linux: ~/.mozilla/firefox/
  • Mac: ~/Library/Application Support/Firefox /.
  • Remove the profiles.ini file to force Firefox to create a new default profile
  • Use the Profile Manager to create a new profile
  • "Select a file" allows to retrieve an existing profile, if there is always a present
  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  See also "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Acer Veriton M275 of does not start after the opening and closing of the case.

  I was about to update with an SSD HD, so I opened the folder and discovered there is no extension SATA ports. Private affair and now system put, CPU fan runs but no display or power USB for keyboard and mouse. Have you tried bypassing the switch of intrusion with a rider-no difference. Tried to remove the battery to reset the CMOS-no effect. Have reinstalled the case and tried without effect. Help

  Turned out to be bad RAM stick. Thank you.

• After the opening and closing of the color picker dialog box, I get a non-specific error message.

  Anyone seen this before?

  This happens with various PS projects and did not happen before the last update.

  Thank you Heinz.

  Please refer to a similar thread the color picker error: 'Could not complete your request because the program error'

  Let us know if that helps.

  ~ Assani

• Conclusion the two (and) open and closed at the same time to grep

  Hello

  I have a character style, I want to apply to all the () in my document.

  In the box GREP, the poster drop I can select one at a time and make the change.

  Is there a way to find them both at the same time regardless of the number of characters is in the meantime?

  Thank you

  Babs

  Waiting - want - you just the bracket, or parenthesis with the stuff between them also? I'm assuming that the first case, then you need not to look "at the time", you can search 'or a' and apply the style.

  What is perhaps better than a GREP search is a GREP style. Add this GREP style to your definition of paragraph of the basic text, and it will automatically format each parenthesis as soon as you type or import:

  [\(\)]

  and have it apply your parenthesis character style.
  (The brackets means "nothing found in this collection of characters". The back-Slash is because that in brackets mean something in GREP, so you add those to tell "(trouver les parenthèses réelles)." If you wish, you can add other characters from this list.
  If you don't want to use GREP styles, search for the same phrase and change for: simply apply the character Style and change all.

• Since upgrading to Windows 10, nd despite reinstall Lightroom, Lightroom from the Creative clouds just keeps crashing.  I've now reached the point that I can't export and must work only on 1 image at a time and keep constantly opening and closing

  Since the upgrade to Windows 10 and despite reinstall it Lightroom. Lightroom from the Creative clouds simply crashes.  I have now reached the point that I can't export and only works on 1 image at a time and constantly keep opening and closing of the software

  Hello

  Please go the Edit option in the library Module, then go in the preferences.

  Go to the performance tab and uncheck the option "use graphics processor.

  Restart lightroom, and see if Lightroom works.

  Please let us know if it helps.

  Kind regards

  Tanuj

• How to remove the sound notification of opening and closing foxfire

  Whenever I open or closed foxfire 36.0.4 I hear a gong, would like to turn off.

  Thank you all, just fixed it. I have pro with sense of power system mechanic.
  It has a checkbox for the sound notification. Uncheck and bong went
  opening and closing of firefox. Still don't know why he touched just this one
  browser and not others.

• Ini_ReadFromFile - opening and closing the file

  When I use the function 'Ini_ReadFromFile()' is it manage the «open» to the folder and the file handle, read the contents in memory and then 'close' the file and by releasing the file handle?  According to me, it does, but we don't do not and I don't see it stated in the documentation.

  Thank you

  You are right that it is not mentioned in the documentation - you can use the link "Submit comments on this topic" at the bottom of the help page respective in the CVI to notify OR omission help file.

  If you look at the two projects in the sample regarding the ini files you will see that in fact there is not open or close the command to read or write an ini file works without explicitly opening or closing of the record.

• Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thank you

  Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thanks in advance

  Just a thought...

  It may be interesting to try to open Movie Maker and go to...
  Tools / Options / compatibility... tab and left click of the
  "Restore all defaults" button / OK.

• RESTORE THE JINGLES ON MY COMPUTER DURING THE OPENING AND CLOSING OF MY COMPUTER

  I GET A GRUFF TONE TO DRAW MY ATTENTION TO ONE WE SCREEN MESSAGE/QUESTION - I FOLLOWED THE ANSWER I GOT, BUT CANNOT RETRIEVE MY JINGLES.   HOW CAN I GETT JINGLES AT THE TIME WHERE THE OPENING AND CLOSING OF MY COMPUTER?

  Is JINGLES default windows sound? Do a system restore

• Box opening and closing constantly on the toolbar

  A box keeps opening and closing on my toolbar, every minute or so. Until I'm able to click on it or to say that it was his party. I have not downloaded anything so I don't know if its a sort of virus. The computer is a week and I've done virus scans and nothing was found.

  Finally found the culprit! Start the computer in safe mode and run the malwarebytes scan found the question. Thx for your time and help!

• I've been using Illustrator but I opened the files would go to the bottom of the page as so dirty. I check my drivers and then uninstalled the program who intend to reinstall, but now it is said that the files are already installed.

  I've been using Illustrator but I opened the files would go to the bottom of the page as so dirty. I check my drivers and then uninstalled the program who intend to reinstall, but now it is said that the files are already installed.

  No one can tell you anything without the proper system or other technical details info. If you have installation problems, start by running the cleanup tool:

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems

  Mylenium