Oracle Configuration Manager server is not available (500)

Similar Questions

• NLB - the RPC server is not available on the specified computer. To connect to the < Server >

  Have a Windows 2008 R2 SP1 NLB service two nodes on VMWare. Bothe nodes have two network cards. Internal one dedicated to NETWORK load balancing and the other for the network.

  Management console of NLB on a single poster NLB node is in good health. The two nodes are visible and OK.

  Management of NLB on the other node shows only its own node - while the other node is missing. An error when updating...
  "The RPC server is not available on the specified computer. "otherNode.com" connection error"

  I disabled the back loop check - it makes no difference.

  Any help please?

  I think I solved the problem...

  As I wrote previously, I disabled the back loop check in the registry on both nodes, create a new DWORD (32 bit) key...
  HKLM\SYSTEM\CurrentControlSet\Control\Lsa\DisableLoopbackCheck - with a value of 1

  Then, I made sure that the link speed & Duplex on all network interfaces are set to a specific value (no Autonegotiation), for example. 1000 Mbps Full Duplex (in my case).
  Ideally only the NIC - on each node - connected to the NETWORK load balancing must be configured with hard values.

  This solved the RPC error in my environment of NLB.

  Hope this helps those who have the same symptoms.

  Samuel.

• "Version of server is not available" when you use CentOS 6 connect.pl

  I want to install a new Nagios Plugin which is basically a Perl script that connects to an ESXi host. I had problems so that it connects and I wonder what is happening.

  I tried to connect to the host using the connect.pl of my CentOS 6 box, and I receive the following error message...

  "Version of the server is not available at . https:// " < ip address > / sdk/vimService.wsdl"

  I can manually navigate to this address, but I can't seem to connect using the Perl script.

  I've seen a lot of suggestions on the addition of {PERL_LWP_SSL_VERIFY_HOSTNAME} $ENV = 0; at the beginning of your scripts, but this doesn't seem to work.

  I also tried to type in export PERL_LWP_SSL_VERIFY_HOSTNAME = 0 in the shell, and it solves nothing. Do not know what is happening.

  Perl v5.10.1

  LWP Version: 6.05

  Crypt::SSLeay Version 0.57

  The issue could be with the environment in the Nagios configuration (maybe the value is crushed or not picked up in a later step).

  Try upgrading Crypt::SSLeay.  There are a few versions were some changes have been added to change the management of self-signed certificates (so all the messages on the use of PERL_LWP_SSL_VERIFY_HOSTNAME).  I have not seen the problem with newer versions of the modules.

  For example, Crypt::SSLeay:VERSION = 0.57 is a bit old (~ 2007).  Under OSX, I'm running the 0.64 version and is no longer necessary for the PERL_LWP_SSL_VERIFY_HOSTNAME when running VMware Perl SDK tools.  I also haven't seen on newer Perl install versions (for example 5.16).  0.64 seems to be the current version of the production, and I suppose the upgrade, it might solve the problem.

• How can I keep a connectivity when the DNS server is not available?

  We have remote locations with several computers that are joined to our domain via a gateway to gateway VPN. When VPN breaks down, they lose the connection to our CD/DNS server. Their ip addresses remain the same, since they are managed by their local router but they failed to connect to other devices to their location even though the devices have static IP addresses. If I understand the use of the LMhosts file must allow me to allow them to keep local communications between computers. I think the entry in LMHOSTS should be like this for each local machine they need to access.

  10.0.0.1 SampleEntry #PRE
  Is there a better way to solve this problem, however?

  Hi Jim,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with connectivity indomain computers when the DNS server is not available.

  As the computer is connected to the domain network, the question you posted would be better suited in the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• To the production Oracle Configuration Management support

  Hi all
  Currently I'm going to Oracle DBA in the production support team. I get call from the Configuration Management team that come to this team. I don't have much knowledge about the CM. Now my question is
  
  1. What is the average of the Configuration management? What is the process generally goes into CM? It has no connection with oracle dba support?
  2. If I'm going to and Configuration management work, again I can come to field support for s/n?
  3. the CM is good for the growth of the carrer...?
  
  Pls clarify me. Thanks in advance.

  Salvation;

  Also check:

  Documentation
  Available at: http://download.oracle.com/docs/cd/E18041_01/index.htm

  Oracle Configuration Manager prerequisites
  Version 10.3.4 - part number E18274-01

  Manager Configuration Oracle Installation and Administration Guide
  Version 10.3.4 - part number E18035-01

  Oracle Configuration Manager Security Overview
  Version 10.3.0 - part number E12881-01

  Distribution Oracle Configuration Manager companion guide
  Version 10.0.1 - part number E14501-02
  Topic: Mass deployment

  Source:
  Index of Master for the Installation of the Manager (OCM) Oracle Configuration, installation and Configuration [1304794.1 ID]

  Respect of
  HELIOS

• I updated iOs 9.3 and I can't activate my Iphone. A message informs you that the server is not available

  I updated iOs 9.3 and I can't activate my Iphone. A message informs you that the server is not available

  Have same problem here too.

  I have iPhone 5 and update iOS 9.3 and I can't activate my Iphone. A message informs you that the server is not available

• I can not get the automatic updates on my samsung jack sgh-i616. _ "connection to the update server is not available. Check your data connection settings and make sure that the device date and time are correct "___RESULT CODE: 80072ee7__ _"

  I can't get the automatic updates on my samsung jack sgh-i616.

   

  "Connection to the update server is not available. "Check your data connection settings and make sure that the device date and time are correct.

   

  RESULT CODE: 80072ee7

   

  -It is a windows mobile 6.1
  
  
  Thank you very much! = D

  As a guide.

  This error code translates ERROR_INTERNET_CANNOT_CONNECT.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• connection to the server is not available error when downloading the journel

  Dear experts,
  
  When downloading the journels to R12 using ADI we face below error
  "connection to the server is not available, please contact your technical support representative.
  
  our environment is apps: 12.0.6 and database 10.1.0.5, linux redhat 5
  
  Please suggest on this issue, there is no error in appl_top/bne/12.0.0/log (infact nothing in this directory)
  
  
  Concerning
  Francis K.
  
  Published by: 918055 on July 3, 2012 06:54

  918055 wrote:
  Hello Hussain,

  Problem has been solved, raised the issue because of the Excel settings, we enabled the option "enabled all macros" and then it worked fine.
  Thanks for your advice on this matter

  Kind regards
  Francis K.

  Thanks for the update and for sharing the solution!

  Hussein

• setupccrt.exe has stopped working in Oracle Configuration Manager

  I installed Oracle 11 GR 2, that everything was fine, but at the end when he was cofiguring Oracle Configuration Manager. I got error folloing
  
  setupccr.exe has stopped working.
  
  I am unable to sort it out, but my database works very well and I started to work on 4 APEX with oracle. but I am still concerned about this error.
  
  If someone can tell me what I shuold do so that this problem can be solved.
  
  Thank you
  
  Concerning
  
  Mazahir Abbas

  Hello
  You want to use the configuration manager? If so, see according to document otherwise ignores the error.

  http://download.Oracle.com/docs/CD/E18041_01/index.htm

  Salman

• WLS 10.3.5 Managed server does not start in Windows 7

  Hello
  
  I had installed SOA suite 11 and weblogic server 10.3.5. setDomainEnv is setting environment variables as below.
  
  Path
  C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\Bin; C:\Oracle\MIDDLE~1\JDK160~1\jre\bin; C:\Oracle\MIDDLE~1\JDK160~1\Bin; C:\Oracle\instantclient_11_2; C:\Oracle\oraclexe\app\oracle\product\10.2.0\server\bin; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0\; C:\Program Files (x 86) \QuickTime\QTSystem\; C:\Program Files\CREDANT\Shield v7.1\. C:\Program Files (x 86) \SSH Communications Security\SSH Tectia\SSH Tectia to THE. C:\Program Files (x 86) \SSH Communications Security\SSH Tectia\SSH Tectia AUX\Support binary files; C:\Program Files (x 86) \SSH Communications Security\SSH Tectia\SSH Tectia broker; C:\Program Files (x 86) \SSH Communications Security\SSH Tectia\SSH Tectia Client; C:\Oracle\Middleware\jdeveloper\ant\bin; C:\Oracle\Middleware\jdk160_24\bin; C:\Oracle\product\10.2.0.1\BIN; C:\Program Files\Java\jre7\bin; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
  
  
  Classpath
  C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar; C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar; C:\Oracle\MIDDLE~1\modules\features\weblogic. Server.modules_10.3.5.0.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/Ant-all.jar; C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/Ant-contrib.jar; C:\Oracle\Middleware\wlserver_10.3\sip\server\lib\weblogic_sip.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;. ; C:\Oracle\Middleware\jdk160_24\lib; C:\Oracle\Middleware\jdeveloper\ant\lib;
  
  Now, I gave this command in user_domains /... folder "/ bin"
  startManagedWebLogic.cmd soa_managed_server01 http://suchalam-ws:7002
  
  But the managed server stops. This is the track of the windows7 command prompt.
  
  This server will be started in mode of managed server independence in the absence of
  the server admin >
  < 30 August 2012 01:13:28 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server sta
  you changed initially >
  < 30 August 2012 01:13:28 IST > < Info > < WorkManager > < BEA-002900 > < initialization is
  ThreadPool LF-tuning >
  < 30 August 2012 01:13:28 IST > < opinion > < LoggingService > < BEA-320400 > < fi Journal
  the C:\Oracle\Middleware\user_projects\domains\sudheers_domain\servers\soa_manage
  d_server01\logs\soa_managed_server01.log will be rotated. Reopen the newspaper if file
  tailings ceased. This can happen on some platforms such as Windows. >
  < 30 August 2012 01:13:28 IST > < opinion > < LoggingService > < BEA-320401 > < fi Journal
  It was shot in C:\Oracle\Middleware\user_projects\domains\sudheers_domai
  n\servers\soa_managed_server01\logs\soa_managed_server01.log00011. Log messages
  will continue to be recorded in C:\Oracle\Middleware\user_projects\domains\sudheer
  s_domain\servers\soa_managed_server01\logs\soa_managed_server01.log. >
  < 30 August 2012 01:13:28 IST > < opinion > < Log Management > < BEA-170019 > < Server
  C:\Oracle\Middleware\user_projects\domains\sudheers_domain\servers\soa log file
  managedserver01\logs\soa_managed_server01.log is open. All the server side e journal
  vents are written to this file. >
  August 30, 2012 01:13:30 oracle.security.jps.internal.common.util.XmlSchemaValida
  Warning of StrictErrorHandler $ tionUtil
  WARNING: Could not validate the xml content. SchemaLocation: schemaLocation earned
  e = "http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd" must have e
  Fri number of URI. Location: column on line 2 of 272.
  < 30 August 2012 01:13:39 IST > < opinion > < security > < BEA-090082 > < initial security
  fact using security realm myrealm. >
  < 30 August 2012 01:13:51 IST > < WARNING > < JTA > < BEA-110503 > < (the ADM migration tool
  inServer for JTA manual migration policy, or the captain Singleton for automatic
  JTA immigration policy) is not available. Jump JTA TRS restoration because isStr
  ictOwnershipCheck [false]. This may cause corruption of TLOG potential if TRS
  soa_managed_server01 has been migrated to the backup server and the backup server
  accesses the TLOG of soa_managed_server01. More security can be achieved in s
  Etting isStrictOwnershipCheck [true]. >
  < 30 August 2012 01:13:52 IST > < WARNING > < management > < BEA-141277 > < MBean JMX
  PlatformMBeanServerUsed attribute is set to true, but the platform MBeanServer was cre
  e without the brackets for the WLS security infrastructure. The MBeanSe platform
  n is NOT used and platform MBeans are NOT available via the runt of WLS
  IME or domain Runtime MBeanServers. This can happen if you have set the platform
  MBeanServer system or options properties of JVM (-Dcom.sun.management.jmxremote or)
  JRockit - XManagement).
  To allow the platform MBeanServer to use, you must either remove the system
  Properties/JVM options or WLS beginning with the following system property:
  -Djavax.management.builder.initial = weblogic.management.jmx.mbeanserver.WLSMBean
  ServerBuilder
  If you want to eliminate this error log and do not need platform MBeans to be a
  available through WLS, then set the PlatformMBeanUsed attribute in the JMXMBean to fa
  LSE. >
  < 30 August 2012 01:14:01 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server sta
  you changed to STANDBY mode >
  < 30 August 2012 01:14:01 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server sta
  you changed initially >
  < 30 August 2012 01:14:04 IST > < error > < hats > < BEA-149205 > < initial failure
  IZE the "wsm - am" due to the error weblogic.management.DeploymentExceptio application
  n: [J2EE:160149] error in the processing of library reference. Unresolved applicatio
  references library n, defined in weblogic - application.xml: [name of Extension: orac]
  the. WSM.seedpolicies, Specification-Version: 11.1.1, implementation-Version: 11.1
  [. 1, exact match: fake]...
  weblogic.management.DeploymentException: [J2EE:160149] error when processing lib
  rary references. Request unresolved library references, defined in weblogic-
  application.XML: [Extension name: oracle.wsm.seedpolicies, Specification-Version]
  [: 11.1.1, implementation-Version: 11.1.1, exact match: false].
  to weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare)
  CheckLibraryReferenceFlow.java:26)
  to weblogic.application.internal.BaseDeployment$ 1.next (BaseDeployment.ja
  will: 613)
  at weblogic.application.utils.StateMachineDriver.nextState (StateMachineD
  River .Java: 52)
  at weblogic.application.internal.BaseDeployment.prepare (BaseDeployment.j
  AVA: 184)
  at weblogic.application.internal.EarDeployment.prepare (EarDeployment.jav
  a: 58)
  Truncated. check the log file full stacktrace
  >
  < 30 August 2012 01:14:04 IST > < opinion > < SipServer.Resource > < BEA-332401 > < Initia
  Also SipServer Resource with configuration com.bea.wcp.sip.management.descript
  or.beans.SipServerBeanImpl >
  < 30 August 2012 01:14:08 IST > < opinion > < WLSS. Engine > < BEA-330071 > < WebLogic Sip
  Version of the patch 'soa_managed_server01' server: WebLogic Server 10.3.5.0 Fri Apr 1
  20:20:06 PDT 1398638 2011
  Javax Server Pages Client Capable 1.2 kills Jul 13 02:43:41 EDT 2010
  Language of expression 2.1 for JSP 1.0 Sun Jul 18 23:17:34 PDT 2010
  Client Servlets able company javax 1.0 Thu Aug 2 12:41:25 EDT 2007
  Eclipse Java Development Tools 3.5.2 Thu Sep 2 09:47:11 EDT 2010
  WebLogic java compiler utils package Client Capable 1.2 Thu Feb 11 03:38:50 EST
  2010
  WebLogic WebApp container Public API Client 1.4 Capable Fri Oct 1 20:01:15 PDT 2
  010
  Oracle WebLogic Server Module dependencies 10.3 Thu Mar 3 14:37:52 PST 2011
  Oracle WebLogic Server on JRockit Virtual Edition Module dependencies 10.3 Thu F
  EB 3 16:30:47 THIS 2011
  Compiler generator ANTLR Java based Client 2.7 MON June 11 12:19:48 EDT 2007
  Descriptors for J2EE 1.5 WebLogic Wednesday May 5 14:32:58 EDT 2010
  Descriptors for J2EE 1.5 WebLogic link Bundle
  Specific to WebLogic descriptors 1.3 kills Sep 14 18:48:42 PDT 2010
  Link bundle 1.3 WebLogic-specific descriptors
  WebLogic Datasource 1.9 kills Sep 26 13:50:26 PDT 2010
  WebLogic Datasource 1.9 Bundle link
  WebLogic Beangen Capable Client 1.7 Wed Feb 24 16:02:48 PST 2010
  Beam of liaison WebLogic Beangen 1.7
  3 WLDF accessor Client 1.5 Capable Fri Sep 17:10:52 EDT 2010
  Binding of accessor 1.5 WLDF Bundle
  Central management of the Client Interfaces Capable 2.8 Thu Mar WebLogic 3 12'S 10:10:20
  11
  Central management WebLogic Interfaces 2.8 link Bundle
  WebLogic EJBGen Capable Client 1.1 Thu Jun 3 13:17:07 EDT 2010
  Apache Byte Code Engineering Library (BCEL) extracted from http://j 5.2.zip
  akarta.Apache.org/site/Downloads/downloads_bcel.CGI with packages renamed o
  RG. Com.bea.core.repackaged.apache.bcel Client 5.2 Tue May 15 09:5 Apache.bcel
  2:37 EDT 2007
  Collections of apache commons package 3.2 Mar Mar 20 15:48:25 MDT 2007
  Commons of Apache package lang 2.1 Mar Mar 20 15:48:30 MDT 2007
  Package apache commons pool 1.3 Mar Mar 20 15:48:36 MDT 2007
  Package apache commons io 1.4 1.0 Wed Jun 2 17:36:36 EDT 2010
  Apache commons fileupload 1.2.1 package 1.0 Wed Jun 2 17:36:36 EDT 2010
  Implementation of DOM Apache 1.0 Thu Mar 20 15:36:46 MDT 2007
  Support for logging Apache 1.0 Thu Mar 20 15:36:50 har 2007
  Apache OpenJPA classes 1.2 Thu Jul 22 09:16:07 EDT 2010
  XMLBeans - Apache SVN rev 962560 2.1 Thu Jul 15 09:52:54 EDT 2010
  BEA logging support Runtime Client Capable 1.8 Mon Jun 7 12:07:02 PDT 2010
  BEA Common Security open SAML 1.0 Fri May 14 20:18:10 PDT 2010
  BEA OpenSAML 2.0 1.0 Wed Mar 24 13:18:27 PDT 2010
  BEA-Harvester - api2.0 Client Capable 2.3 lun 15 February 14:41:06 this 2010
  BEA-Harvester - jmx2.0 Capable Client 2.3 Wed Feb 3 11:54:03 PST 2010
  BEA-Harvester-utils 1.4 Client Capable lun 15 February 14:41:06 this 2010
  BEA-mbean-type-util 1.4 Wed Feb 24 19:15:33 this 2010
  3.7.19 Javolution 3.7 kills Aug 28 17:32:21 PDT 2007
  Joda-time 1.2.1 1.2 kills Aug 28 17:32:27 PDT 2007
  Load at the BEA STAX Build 1.5 Mar may 4 07:32:25 PDT 2010
  STAX BEA time Runtime Support Capable Client 1.7 Wednesday 4 August 19:40:47 EDT 2010
  Generic BEA Annotations Capable Client 1.3 Sat Jul 11 00:30:54 2009 EDT
  BEA Kodo 1.4 Mon 7 February 16:22:04 PST 2011
  BEA Kodo integration Client Capable 1.6 Sun Nov 22 16:29:06 PST 2009
  BEA Kodo integration 1.6 link Bundle
  BEA Kodo integration tools 1.4 Thu Feb 3 16:00:53 GMT 2011
  SVN XML beans Marshalling (package renamed com.bea) 962560 2.3 Thu Mar 3 12:10:1
  0 EAST 2011
  WebLogic Utils Client able 1.9 Thu Mar 3 12:10:10 CEST 2011
  5.3 aspects Fri Jun 4 14:55:18 PDT 2010
  Apache Commons Logging 1.2 BEA reconditioned MON June 11 12:47:12 EDT 2007
  Spring Framework 1.1 Thu Dec 3 12:21:08 CEST 2009
  Pitchfork 1.3 Thu Jun 3 13:17:07 EDT 2010
  ${description} 1.2 Fri 25 Jun 16:25:26 EDT 2010
  I18n CSS 1.0 Fri Oct 8 10:32:52 EDT 2010
  XACML CSS 1.0 Fri Oct 8 10:32:52 EDT 2010
  Saml2 Utils 1.0 Fri Oct 8 10:32:52 EDT 2010
  Implementation of BEA Common Security 1.0 engine Fri Oct 8 10:32:52 EDT 2010
  BEA Common Interfaces 1.0 security engine Fri Oct 8 10:32:52 EDT 2010
  BEA Common Security API 1.0 Fri Oct 8 10:32:52 EDT 2010
  Security BEA Common 1.0 implementation Fri Oct 8 10:32:52 EDT 2010
  JDK BEA Common Security 1.0 utilities Fri Oct 8 10:32:52 EDT 2010
  Security utility 1.0 Fri Oct 8 10:32:52 EDT 2010
  Commune of security SAML 2.0 1.0 Fri Oct 8 10:32:52 EDT 2010
  Common security SAML 2.0 management JavaBeans 1.0 Fri Oct 8 10:32:52 EDT 2010
  Security Utilities 1.0 provider Fri Oct 8 10:32:52 EDT 2010
  Utils SAML 1.0 Fri Oct 8 10:32:52 EDT 2010
  XACML 1.0 Utils Fri Oct 8 10:32:52 EDT 2010
  Security environment 1.0 provider Fri Oct 8 10:32:52 EDT 2010
  RSA certj 3.1 Wednesday 5 May 15:11:55 PDT 2010
  Netscape LDAP JDK 1.2 Mon Jun 7 15:56:47 EDT 2010
  Utilities management network of common classes 1.0 Wed Feb 6 09:01:03 PST 2008
  WebLogic SAAJ 1.6 Wed Jun 16 22:02:31 EDT 2010
  WebLogic STAX Capable Client 1.9 Thu Feb 10 18:00:52 PST 2011
  JAXB - impl.jar from Glassfish 2.1.9 JAXB 1.0 Fri August 20 at 14:37:07 EDT 2010
  JAXB - impl.jar from Glassfish 2.1.12 JAXB 1.0 Thu May 6 16:10:04 PDT 2010
  resolver.jar taken of Glassfish JAXWS 2.1.5 1.0 Thu Dec 3 17:46:24 this 2009
  FastInfoset.jar taken of Glassfish JAXWS 2.1.5 1.0 Thu Dec 3 17:46:27 this 2009
  
  JAXWS - rt.jar from Glassfish JAXWS 2.1.5 1.2 lun 28 fev 17:53: 01 PST 2011
  Java.NET implementation of MimePull.jar from Glassfish JAXWS 2.1.5 1.0 Thu
  3 dec 11:46:33 IS 2009
  Codehaus STaX Interfaces 3.0.1 1.0 Mon Mar 8 20:49:50 PST 2010
  Analyzer of STaX in Woodstox 4.0.5 1.0 Thu Dec 3 17:35:43 this 2009
  JAXWS - tools.jar from Glassfish JAXWS 2.1.5 1.1 Fri Sep 24 17:55:05 PDT 201
  0
  Java.NET Stax 1.0 Extensions kills Jun 3 07:12:06 PDT 2008
  Java.NET buffer the stream of xml 1.0 Thu Mar 17 05:24:12 PDT 2009
  Jakarta ORO 1.0 Wed Feb 6 15:01:03 PST 2008
  Activation of company javax 1.1 kills Apr 8 09:31:17 PDT 2008
  Annotation javax 1.0 Fri dec 25 09:02:47 PST 2009
  Javax Interceptor 1.0 Thu Mar 20 15:37:16 MDT 2007
  Javax Enterprise Beans 3.0 MON June 11 12:21:01 EDT 2007
  Java Data Objects 2.0 MON June 11 12:20:56 EDT 2007
  API deployment Enterprise Java 1.2 Mar Mar 20 15:37:28 MDT 2007
  Java Enterprise Messaging 1.1 MON June 11 12:21:11 EDT 2007
  Java Web Services 2.0 Mar Mar 20 15:37:37 MDT 2007
  Mail company javax 1.1 Mon 6 July 10:41:09 MDT 2009
  Java Enterprise Management API 1.0 Thu Mar 20 15:37:49 MDT 2007
  Client persistence Capable 1.0 Java kills 7 Oct 12:18:34 PDT 2008
  Connector Java 1.5 MON June 11 12:22:07 EDT 2007
  Contract authorization of Java for containers 1.0 Wed Feb 6 15:01:03 PST 2008
  Javax Transaction API Capable Client 1.0 Thu Aug 2 12:42:14 EDT 2007
  JAXB 2.1 MON June 11 12:22:53 EDT 2007
  Register Java XML 1.0 Wed Feb 6 15:01:03 PST 2008
  Extensions of Soap XML Java 1.3 MON June 11 12:22:59 EDT 2007
  Extensions XML Stream Java 1.1 MON June 11 12:23:05 EDT 2007
  JAX - WS API 2.1 MON June 11 12:23:16 EDT 2007
  Java API for XML-based RPC 1.2 MON June 11 12:23:10 EDT 2007
  The dynamic Agent SNMP Monfox 1.1 Fri Mar 19 05:46:27 MDT 2010
  1.14.3 SERP bytecode manipulation framework Fri June 11 12:06:08 PDT 2010
  WebLogic Apache Classes Capable Client 1.2 Thu Feb 18 22:06:19 PST 2010
  WebLogic BeanInfo cached and discovery Client Capable 2.4 Sat Nov 25 20:46:29 P
  DT 2008
  Descriptor WebLogic Client 1.9 Capable kills Jul 20 16:03:09 EDT 2010
  Reconditioned DSO - 3.2 1.0 Thu Jul 31 19:30:27 MDT 2009
  Reconditioned asm-Commons - 3.2 1.0 Thu Jul 31 19:30:27 MDT 2009
  Reconditioned asm-tree - 3.2 1.0 Thu Jul 31 19:30:27 MDT 2009
  Reconditioned asm-util - 3.2 1.0 Thu Jul 31 19:30:27 MDT 2009
  Oracle JFR 1.0 Thu Feb 18 19:06:33 PST 2010
  WebLogic diagnostic Core Interfaces Client 2.5 Capable Thu Jun 3 05:20:41 PDT 2
  010
  WebLogic Diagnostics Logging Client able 1.2 Fri Dec 12 11:37:59 MST 2008
  WebLogic diagnostic query Module Client Capable 1.2 kills Sep 27 02:48:36 PDT 200
  9
  Diagnostic tool WebLogic Instrumentor 1.7 Mar may 18 at 03:51:46 PDT 2010
  Tool for configuring WebLogic diagnostic Instrumentor 1.7 Mar 29 June at 16:41:19 EDT 2010
  Diagnostics of WebLogic JRockit Flight Recorder Interfaces Client Capable 1.1 Fri O
  TB 29 16:32:05 EDT 2010
  Diagnostic Notifications Module Capable Client 1.4 Sun Nov 22 16:03:32 PST 2009
  
  BEA logging supported Runtime Client 1.5 Capable Wed Apr 29 20:43:42 EDT 2010
  WebLogic i18n Runtime Support Capable Client 1.8 Fri Sep 10 22:12:34 EDT 2010
  WebLogic i18n build Support Client Capable 1.5 Fri Feb 19 15:03:15 this 2010
  WebLogic I18N Tools Client Capable 1.3 Sun Nov 22 16:03:32 PST 2009
  WebLogic JMX 1.4 management interfaces game Aug. 12, 11:16:22 PDT 2010
  Tool provider WebLogic security 1.5 Wed Oct 14 16:39:28 MDT 2009
  WebLogic security provider generation tool Client 1.5 Capable Wed Oct 14 16:39:2
  8 MDT 2009
  WebLogic Messaging Client Kernel 1.8 Capable Lun 23 August at 21:42:11 EDT 2010
  WebLogic Resource Pool Capable Client 1.7 kills Sep 27 12:00:08 EDT 2010
  WebLogic Socket Muxer API Capable Client 1.2 Thu Apr 1 21:16:27 EDT 2010
  WebLogic RMI Client able 1.10 Tue Mar 22 16:56:32 PDT 2011
  Support integration common security WebLogic Server 1.0 Fri Oct 8 10:32:52 EDT
  2010
  Lifecycle Server Interfaces Client 1.4 Capable Fri Feb 19 15:03:15 this 2010
  WebLogic Store Client Capable 1.7 Fri dec 17 16:52:31 EDT 2010
  STORE of WebLogic GXA Client Capable 1.6 Mon August 23 at 21:16:10 EDT 2010
  Store of WebLogic Admin tool Client Capable 1.2 Thu Jan 21 10:24:18 PST 2010
  WebLogic JDBC Store Client Capable 1.3 Mon May 17 10:46:33 PDT 2010
  Implementation of WebLogic JTA Client able 2.7 Fri Sep 17 12:19:45 PDT 2010
  WebLogic Utils 1.9 Thu Mar 3 12:10:10 CEST 2011
  Agent Utililities 1.1 Wed Feb 16 00:16:03 EAST 2010
  Implementations of WebLogic Classloader utility customer able 1.9 Wed Mar 2 14:10:
  04 PST 2011
  WebLogic tools to work with the Expressions customer Capable 1.4 kills Sep 29 14:45:
  53 EDT 2009
  WebLogic Utils for the dynamically generated class Wrappers Client 1.4 Capable Fri F
  EB 13 14:44:23 MST 2009
  WebLogic timers Client Capable 1.7 Thu Feb 18 13:08:44 this 2010
  WebLogic Manager work Capable Client 1.10 Thu Feb 17 10:25:54 PST 2011
  WebLogic Workarea Capable Client 1.7 Wed Feb 24 17:18:56 PST 2010
  WebLogic XML XPath application Client 1.4 Capable Mon Feb 22 15:07:14 PST 201
  0
  WebLogic Tuxedo Connector Core Client 1.5 Capable sam 3 Jul 19:05:38 EDT 2010
  WebLogic Security 1.0 Fri Oct 8 10:32:52 EDT 2010
  WebLogic Server Java Authentication Helper Classes Client Capable 1.1 MON Jul 5
  20:42:35 EDT 2010
  WebLogic Server Message Digest utility Client Capable 1.0 Thu Aug 2 12:51:30
  DT 2007
  WebLogic Server authenticated object Client Capable 1.1 Thu Oct 28 05:46:37 PDT
  2010
  WebLogic Server authenticated customer 1.5 object Capable Thu Sep 9 10:23:21 MDT
  2010
  PrintingSecurityManager - PSM 1.1 kills Feb 16 05:30:08 PST 2010
  Security ssl WebLogic classes 1.0 Mar 15 June at 17:39:53 EDT 2010
  WebLogic Nodemanager Plugin Client Capable 1.3 kills Nov 18 18:23:10 this 2008
  nodemanager module managed process 1.0 Thu Apr 8 15:14:38 PDT 2010
  WebLogic JMS pool Client Capable 1.8 Thu Mar 3 14:11:40 PST 2011
  Contains the type of WLS 9.0 compiled schema for compatibility WLP 1.3 Wed Feb 24
  19:15:33 THIS 2010
  WebLogic Http Pub/Sub Module Client Capable 1.6 Mon 12 Jul 02:31:07 EDT 2010
  Re-engineering project 1.5 classes Monday, may 10, 19:48:21 EDT 2010
  Of redefining Client 1.5 Capable class project Mon Apr 5 17:00:52 PDT 2010
  Class redefinition project 1.5 link Bundle
  Commonj SDO 1.0 Thu Sep 24 19:11:23 PDT 2008
  Descriptor consistency WebLogic 1.1 Wednesday May 5 15:17:47 EDT 2010
  WebLogic 1.1 descriptor consistency liaison Bundle
  This module contains all the catalogs of messages 1.1 Fri Dec 17 08:04:35 PST 2010
  WebLogic Web service API 1.1 Public kills 21 Sep 22:15:05 EDT 2010
  Integration of WebLogic EclipseLink 1.0 Thu Feb 25 14:56:43 PST 2010
  WebLogic SCA Client 1.0 Thu Feb 25 10:27:00 EST 2010
  WebLogic RAC Module UCP Capable Client 1.0 kills Sep 13 09:03:00 PDT 2010
  BEA Patches of Ant apache 1.2 Capable Client Wed Jan 13 08:48:17 PST 2010
  Oracle WebLogic Server 10.3.4.0 to 710154 built: 30/09/2010
  Oracle WebLogic Server 10.3.4.0 to 710154 built: 30/09/2010
  Oracle WebLogic Server Datatier 10.3.4.0 in 710154 built: 30/09/2010
  Oracle WebLogic Server 10.3.4.0 to 710154 built: 30/09/2010
  WebLogic SIPServer Extension API 10.3.4.0 to 709997 built on 27/09/2010
  WebLogic SIPServer Extension API 10.3.4 in 709997 built on 27/09/2010
  10.3.4 to 709997 WebLogic SIPServer CallState built on 27/09/2010
  Oracle WebLogic Communications SCTP 10.3.1 to 688160 built on 2009/03/11
  WebLogic WebService Databinding Plugins 1.3 Wed Dec 1 17:41:28 EAST 2010
  WebLogic WebService Databinding 1.3 Mar 18 16:38:56 EDT Oct 2011
  Activator of WebLogic SIP 10.3.4 in 710163 built on 30/09/2010
  >
  < 30 August 2012 01:14:08 IST > < error > < WLSS. Engine > < BEA-330075 > < there is no s
  the IP channels nor of diameter for the server "soa_managed_server01" >
  < 30 August 2012 01:14:08 IST > < error > < WLSS. Engine > < BEA-330049 > < has no stars
  t the sip service, closing >
  
  C:\Oracle\Middleware\user_projects\domains\sudheers_domain\bin
  
  Thanks in advance,
  Sainaba

  Sainaba salvation,

  Did you go through the Meadow requistes correctly?

  http://www.Oracle.com/technetwork/middleware/BPM/downloads/index.html
  Prerequisites & the recommended installation process

  That States

  Database
  Oracle database is the database recommended for deployments of BPM Suite. Note that Oracle Express Edition (XE) 10.2.0.1 does not meet the requirement of the minimum version of use supported, but will usually work in a personal development environment.
  If you use Oracle XE as your database, you must set the RCU_JDBC_TRIM_BLOCKS true environment variable before you run the RCU. Reminder about the level of support, when executing the RCUS against XE you receive a warning indicating that the database version is not supported by Oracle.

  If UCR has been run without defining this RCU_JDBC_TRIM_BLOCKS (with XE DB), please drop and recreate the schema.

  Concerning
  Fabian

• Microsoft activation error activation server is not available to Microsoft's Activation Server is currently offline for regular maintenance or upgrade, or she may have technical difficulties now activating the Microsoft Reader

  Original title: Reader Activation - down for Mainentance... for weeks?

  When I try to activate my Microsoft Reader on Windows Mobile 6.5 (on a Samsung Omnia ii) or Windows 7 Home 32 bit, I got the message: Activation activation error Server Microsoft is not available to Microsoft's Activation Server is currently offline for regular maintenance or upgrade, or she may have technical difficulties now. Please try to activate later. At first I waited patiently the mainenance remaining or the technical problem to be solved... but I now have the message every time I tried to turn on the last two weeks. The server is really low? How the world do we get support on MS Reader? There has been a lot of complaints about the support for this product. Normally, I was able to get my camera Windows Mobile works, but lately nothing works. The Windows Mobile device appears somewhat spoil the activitation and demanded each month reactivation couple... but now I can not get anything to activate and it seems to be a server problem, not a PC or device issue. If someone has never penetrated the MS ranks to find someone who really knows what happens, please advise kindly. Thank you Joel at Bellevue

  Interestingly, I tried to activate MS Reader on my HD2 tonight in preperation to give to my girlfriend (I'm getting a feeling tomorrow, she has several seldomly but I hope she'll get into the Kindle as the HD2 duel boots into Android).

  My laptop is running W7 Pro with IE9, I'm a domain administrator.

  Race through the activation that I generated an error 500 on the server each time.

  With IE9 "Run As" administrator, it works.

  I hope this helps.

• Manage the option not available & administrative tools not available

  Using windows 7 Home Basic in my laptop. Now am not able to get to 'manage' option to right-click on 'My Computer' & when I try to access administrative tools in the control panel his watch an error as the location is not available. What should I do? Help, please.

  Feisal

  Hello

  1. What is the exact error message do you get?

  2. have there been recent changes to the computer before the show?

  Method 1: I suggest you of scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2: Also I suggest to open the original location administrative tools and check if the same problem persists.

  "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors."

  Method 3: you can also your computer in a clean boot state and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• BDE 2.1.1 Fling Management server does not connect to vCenter

  I have the management server deployed in the environment, the plugin installed successfully and vCenter is connected to the administration via the Web interface of vCenter server. This problem occurs when I go to a data store or add it to a network.

  I get the following (via the GUI or CLI):

  Version: 2.1.1

  Welcome to Serengeti CLI

  Serengeti > Connect - host hadoop - mgmt.or1.omniture.com:8443

  Enter the user name: [email protected]

  Enter password: *.

  Connected

  Serengeti > data store, add - name defaultDS - spec DS10HadoopOR1 - shared type

  datastore defaultDS add failed: unable to connect to vCenter Server.

  The error in the serengeti.log file is a generic JAVA error. The vCenter is 5.5U2 and ESXi hosts are 5.5U1.

  --

  Chris.

  Thanks Charlie for a helping hand.

  I found some info in the serengeti.log and the serengeti - boot.log Chris post:

  Serengeti - boot.log:

  I, [2015-02 - 12 T 20: 56:27.722910 #3336] INFO -: templateVmName: vSphere Big Data Extensions - Node Template

  Serengeti.log:

  Caused by: com.vmware.bdd.utils.AuAssert: FAILURE

  at com.vmware.bdd.utils.AuAssert.FAILURE(AuAssert.java:28)

  at com.vmware.bdd.utils.AuAssert.check(AuAssert.java:43)

  at com.vmware.bdd.utils.AuAssert.check(AuAssert.java:50)

  at com.vmware.bdd.service.impl.ClusteringService.getTemplateVm(ClusteringService.java:408)

  [2015 02-12 T 14: 46:47.438 - 0700] INFO Event_Expander | com.vmware.bdd.service.event.EventScheduler: to develop events: [{me = null: VirtualMachine:vm - 136, event = VmResourcePoolMoved}]

  [2015 02-12 T 14: 46:47.626 - 0700] INFO pool-2-wire-4 | com.vmware.bdd.service.utils.VcResourceUtils: folder xxx-uuid was not found.

  [2015 02-12 T 14: 46:47.627 - 0700] INFO pool-2-wire-4 | com.vmware.bdd.service.event.VmEventManager: VM root folderxxx-uuid is not yet created. Ignore the event outside of VM.

  [2015 02-12 T 14: 46:58.393 - 0700] Event_Handler INFO | com.vmware.bdd.service.event.EventScheduler: processed 2 new events

  [2015 02-12 T 14: 46:58.394 - 0700] Event_Handler INFO | com.vmware.bdd.service.event.EventScheduler: processed events: [{me = null: VirtualMachine:vm - 137, event = VmResourcePoolMoved}, {me = null: VirtualMachine:vm - 136, event = VmResourcePoolMoved}]

  [2015 02-12 T 14: 47:13.183 - 0700] Http-8443-5 ERROR | com.vmware.bdd.rest.RestResource: rest call error

  com.vmware.bdd.exception.BddException: unable to connect to vCenter Server.

  at com.vmware.bdd.exception.BddException.INIT_VC_FAIL(BddException.java:189)

  at com.vmware.bdd.rest.RestResource.verifyInitialized(RestResource.java:1175)

  at com.vmware.bdd.rest.RestResource.addDatastore(RestResource.java:636)

  This log shows THAT BDE Server cannot find the node named "vSphere Big Data Extensions - Node Template" model.  When you deploy the BDE Fling, the management server and hadoop-model VM must be deployed in the same folder in, under a pile of vCenter.  Please check and follow the BDE 2.1.1 Fling deployment guide and deploy again.  BTW, you can customize the name of the server VM and the VM model during their deployment and make sure the correct model name together when you deploy the server VM.

• VMWare Update Manager Server does not work after changing name of host/IP

  I have Virtual Center 2.5 update 4 and Manager Update on two separate servers.

  I had to rename and change the IP of the Server Manager to update, and now the Server Update Manager does not work.

  Here are two mistakes that I get, when you try to activate the plugin Update Manager:

  "The server took too long to respond" or "VMWare Update manager cannot accept applications because VirtualCenter.

  Server is not reachable, or it's the database is not reachable

  by train to stop'

  That's what I did to change the host name:

  -J' uninstalled virtual UpdateManager 1.0 Clients Center customer.

  -I stopped the Service VMware Update Manager on the update server

  -J' I renamed the update server changed its IP address and the host name and then rebooted the server (without starting the VMware Update Manager Service)

  -J' changed the value of the fields

  dbo. VPX_EXT_CLIENT. URL

  dbo. VPX_EXT_SERVER.UR

  -in the vCenter (on the vCenter server) database reflecting the new name of the server (the new hostnameis to pings to the vCenter server)

  -J' restarted the vCenter Server

  -J' started the Service VMware Update Manager on the update server

  -J' installed the client plugin update manager Virtual Infrastructure client

  -J' have TRIED to activate the plugin, but I got a warning about an untrusted certificate (I guess it happened also when I installed the client for the first time, and everything worked) and then I got two errors:

  sometimes "the server has taken too much time to react" and a few other times "the VMWare Update manager cannot accept applications because VirtualCenter.

  Server is not reachable, or it's the database is not reachable

  by train to stop'

  I think that there are a few other references to the host name of the Update Manager, which I have not changed, on the vCenter server or Manager Update server...

  Does anyone have an idea what do I do?

  Thank you in advance.

  I would try just reinstalling the update on existing installation manager.  Do not overwrite the database in the process so that you shouldn't really lose anything.  Not the plugin, but since the Update Manager vCenter installation media.

  Give that a try and let us know how it goes.

• ORACLE to SQl server dblink not working not not using DG4ODBC

  Hello
  
  Please help relsove below question
  
  Oracle version: 10.2.0.4.0
  AIX: 5.3
  Gateway: 11.2
  SQl server 2005
  
  I installed the gateway on the SQl Server machine.
  
  I am faced with error below
  
  
  ERROR on line 1:
  ORA-00942: table or view does not exist
  [Microsoft] [ODBC SQL Server driver] [SQL Server] Incorrect object name
  'TBL_ARL_CRMUSERS '. {42S 02, NativeErr = 208} [Microsoft] [ODBC SQL Server
  Instructions driver] [SQL Server] could not be prepared. {NativeErr 42000, 8180 =}
  ORA-02063: preceding 2 lines of ODS
  
  
  Help, please

  Hello
  SQL * database server that connects DG4ODBC is defined in the system DSN created which is then specified in the parameter.

  HS_FDS_CONNECT_INFO

  When you set up the system DSN, you choose the database to which you are connecting.

  Kind regards
  Mike