Oracle diagnostic Log Analyzer Question

Similar Questions

• JDeveloper 12 c Oracle Diagnostic Log Analyzer does not work

  Hi, I use JDeveloper 12.1.3 to develop my application and I activated the diagnosis Oracle log set up for my local integrated Web server.

  Basically, I want to test the performance of my application, such as the loading time of the page / LOV loading time / etc...

  Some option was enabled for registration, which includes oracle.adf, oracle.adfinternal, oracle.jbo.

  However, when I ask "by ADF Request', nothing have been made from there.

  

  So I try to interview "by the Log Message" and there are a lot of return. When I sort the return by getting the 'ADF ask only', I saw on ADF application with an error sign beside it, there is an entry and a reason for the error to come up with it

  "Previously reported an error [IndexOutOfBoundsException in o.adf.logging.dt.analyzer.model.LogMessageNode:108].

  No idea how to solve this problem?  Thank you very much!

  

  Yes, I'm on 12.1.3 also.

  You must enable Diagnostics logging as in the image below

  

  Then it should work.

  Timo

• Oracle diagnostic Log Analyzer ADF ask don't not showing life cycle phase JSF

  Hello

  I'm under JDeveloper 11.1.1.7 and run a web application through the Weblogic Server integrated. I'm trying to view the logs in the lifecycle phase JSF as they show in the Fusion of the ADF for 11.1.1.7 Developer's Guide (section 31.5).

  

  I see in the developer's Guide that you configure logging for these packages, I did: oracle.adf (Java: more BEAUTIFUL, ODL:TRACE:32), oracle.jbo (Java: CONFIG, ODL:NOTIFICATION:16), oracle.adfinternal (Java: INFO, ODL:NOTIFICATION:16). Is to show log for me messages, but not the life cycle phase JSF:

  

  What I have to to get the phases of life cycle JSF to show the value?

  Thank you

  Steve

  I realized my mistake. I had put the internal logging ODL for oracle.adfdtlevel to NOTIFICATION: 16 instead of oracle.adfinternal. Updated the log levels and now I get the phases of the life cycle JSF, and ADF.

  Steve

• EAS Log Analyzer

  Hello

  Log Analyzer allows us to generate graphs of journal for the analysis of the activities of the users. Can you please if there is Maxl commands to automate the updating, create or delete the journal of graphics? When Essbase or Application logs are purged, it also deletes the filters created in Log Analyzer? Please suggest.

  Thank you and best regards,

  Andy

  There is no MaxL - it is really just a function of EAS 'client' (I know it is done by the server-side EAS application, but it does not part of Essbase himself).

  I don't know the answer to your question of if filters are lost when logs are purged, but is also very easy to test?  You could use Sample.Basic or create a test application if you don't have a development server.

• log Analyzer?

  I have installed server for fun and learning.

  This year, he was attacked several times.

  The problem is that I don't spend much time to check the logs, take a long time before I realized it.

  Is there a Log Analyzer or something that alert when there is a problem as an IP attempts a password for several hours?

  As far as I KNOW, there is no built-in log reduction and analysis within the OS X Server tools.   There are additional log analysis tools.

  If OS X Server it has some features of firewall in this area through pfctl(8).

  Botnets easy to circumvent the usual types of reactive treatment, however, a single test every one of a zillion hosts works as well as a bunch of a host tests and is much harder to block.   That usually means setting up an external firewall or VPN services and reducing the number of ports exposed.

  Switch back to certificates where you can and learn more about what can do for the passwords.

• How to find the diagnostic logging is enabled?

  Hello
  When I open a page of provider, I get a warning ' low level diagnostic logging is enabled. This may temporarily reduce performance "." Recently, I did the following
  
  Enable logging DNF using responsibility of the system administrator by setting the
  
  following profiles to the USER level.
  
  DNF: Active Log Debug = Yes
  DNF: Debug Log level statement =
  DNF: Debug Log Module = %
  
  I'm not sure of the previous value of the profile system. Is there a way to know which profile parameters have been changed?
  
  Thank you
  REDA

  Enable logging DNF using responsibility of the system administrator by setting the

  following profiles to the USER level.

  DNF: Active Log Debug = Yes
  DNF: Debug Log level statement =
  DNF: Debug Log Module = %

  I'm not sure of the previous value of the profile system. Is there a way to know which profile parameters have been changed?

  Default values are:

  DNF: Debug active Log = No.
  DNF: Debug Log level = Exception
  DNF: Debug Log Module = %

  If you want to know when these values were changed, you could get to the application (help > historical Record) or ask FND_PROFILE_OPTIONS_VL.

  Thank you
  Hussein

• Oracle diagnostic tool

  Hi all
  
  I tried to put the responsibility to my Oracle Diagnostics Tool user but when I test it I have this error: Oracle diagnostic tool is not a valid responsibility for the current user. Please contact your system administrator. I put the following profiles Yes: DNF: Diagnostics, utilities: Diagnostics.
  Any ideas?

  Have you tried to check after Apache bouncing with clear cached (11i)?

  If it still does not work, then run
  "Synchronize LOCAL WF tables"
  and try

  Thank you
  JD

• The VCS Diagnostic log output

  Hello!

  To try to determine why the traversal calls are intermittenetly default, I stumbled on the following in the Debug Diagnostic VCS log - E;

  2013 09-12 T 11: 04:20 - tvcs cefa-videoconf-vcsexpress01 07:00: elements UTCTime = "2013-09-12 18:04:20, 223" Module ="developer.fsm" Level = 'ERROR' CodeLocation="allshare/fsm/fsmprntf.cpp(324)" method ="": fsm_ERRTEXT "Thread ="0x7f7965ca6700": detail ="Attempt rejecting W of HTTPFSM to solve the empty hostname"Self ="DNS:0 " "Sender ="HTTPFSM:0. " "MSG ="DNS_HostByName_Req"task ="T_READY_DNS_HOSTBYNAME_REQ"State ="S_READY"NxtState ="S_READY ".

  2013 09-12 T 11: 04:20 - tvcs cefa-videoconf-vcsexpress01 07:00: elements UTCTime = "2013-09-12 18:04:20, 223" Module ="developer.http" Level = 'ERROR' CodeLocation="ppcmains/httpclient/httpfeedtask.cpp(976)" method ="": HTTPFEED_doHTTPResponse "Thread ="0x7f7965ca6700": detail ="Could not connect to URL.""

  2013 09-12 T 11: 04:20 - tvcs cefa-videoconf-vcsexpress01 07:00: elements UTCTime = "2013-09-12 18:04:20, 224" Module ="developer.http" Level = 'ERROR' CodeLocation="ppcmains/httpclient/httpfeedtask.cpp(607)" method ="": httpfeed_retry "Thread ="0x7f7965ca6700": detail ="maximum attempts. " Your comments didn't this time. »

  It seems that VCS tries to reach something but does not give up because the maximum number of attempts has been reached.  I do not see this e-mail when calls are making even though the firewall as they should.  When the calls start to fail, I see that the foregoing repeated many times.

  The VCSes are the two X7.2.2.  The call goes through an IPGW running 2.0 (1.7), which is registered in the VCS-E.  The call came from the public internet, go to an endpoint inside the firewall of the memorandum of appeal through the firewall is H.323.

  My questions are;

  -This sequence of message would cause the fault of calls?

  -If it's just a symptom of the real problem, which is HTTPFSM and what host name empty could he try to solve?

  -The first entry shows 'W rejecting the attempt '.  'W' would be the firewall?

  -There is an external Manager configured on theVCS-E, which is not reachable from the public internet.  Could the attempts by the VCS-E to reach the external trigger managing a denial of firewall that prevents to carry out calls?

  - and finally, the e-mail above sounds familiar to anyone?

  Thank you!

  Don't remember seeing these messages in my logs, but now grep-ing on the current

  files that I didn't want her either.

  HTTP resembles something of web service, maybe your VCS try to connect to your TMS and

  fails, some political or some access to the api internal, commissioning, receiver feedback...

  As you already outside Director is defined but not ok, I think that's the reason.

  Also fits as this sends feedback to the Manager when the call is made, which would be the case

  If it failed.

  Verify that you do not have an ALG in the path, that can also be at the remote site.

  VCS has a quite modern h323 signaling, what works in other directions may therefore be broken

  When a vcs is in the picture.

  How is the call flow? The remote site connects directly to the IPGW?

  We had the feeling that everything works well ask smoother people to dial the address IP of VCS

  and then use the alias of relief VCS to point to an alias on the IPGW ;-)

  Please remember useful frequency responses and identify useful or correct answers.

• Oracle Redo Log activity

  Hi members,
  
  I have an Oracle database instance where the log files continue to grow even when there is no activity of the use of the application.
  What I noticed it seems to be some model of frequency as to where this newspaper activity occurs.
  My question is, is there any default Oracle process or to the demand for jobs that will result in the generation of this log data.
  
  
  Thank you
  Alan

  Hello
  You will have many background running processes and that they generate text-based newspapers. You for example MMON, automatic backups (if enabled), 11g you have autotask process which tune top sqls, collect stats etc. Then, even when nobody connects to the db you'll always some activities there.

  Paul

• VI Analyzer Questions: Change the default test configuration and screw "Pavilion".

  I have two things I continue to come through in VI Analyzer:

  1. are there in any case to set the default VI Analyzer so that it applies to all projects, I'm working on that?

  I tried to create a task in project A, registration of the configuration and any attempt to open this file in project B, but it says that the file could not be loaded. The reason for my question is that there are a few default options that just add errors that we don't care (e.g. Controls dialog on the façade - 99% of the LabVIEW code that we are working on is called from TestStand as code modules, so the front panel doesn't really count)

  2. can I score / report some screws as 'safe' for parser tests?

  Basically, some screws may fail some perfectly safe way VI Analyzer tests (e.g. non-stanard errors on a 'closing' VI, who doesn't have a case error structure so that the device always gets closed). I wish I had a way to mark the VI kind VI Analyzer would ignore this particular test. This would allow me to have a rule that says something like "before any construction, run the file configuration VI analyzer and make sure there is not error", as opposed to "run VI Analyzer and examine errors, decide whether or not they are important for the VI in question..." ». An extension to this question would be how do I perform a task VI Analyzer before building when the VI Analyzer screw do not accept files cfg for project based tasks.

  Any help would be greately appreciated!

  Thank you

  Shaun

  1. a project oriented .cfg file cannot be transferred between projects.  Could you possibly create a .cfg unrelated to the project file (under the option 'Start a new task' on the first page of the VI Analyzer) and use it?  He would have no file in the list, but it would have all of the configured tests as you want.  And you could start with this on your different projects .cfg file... you would just add screws based on file (on page 2 of the VI Analyzer), rather than have all come to you in a .cfg project-based.

  2. on page 4 VI Analyzer, you can exclude certain tests to run on some screws and save these settings in a .cfg.  This option is also exposed in the VI Analyzer API with VIAn exclude the VI.vi Tests.

• Need help with 6 33 sidebyside event log error questions

  I did a complete reinstall of Windows Vista.  The event log showed mistakes aside nearby.   This is one of the six - sxstrace.exe used for the information:

  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = AMD64
  CultureFallBacks = en-US; en
  ManifestPath = C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Shfusion.dll
  AssemblyDirectory = C:\Windows\Microsoft.NET\Framework64\v2.0.50727\
  Application configuration file =
  -----------------
  INFO: Parsing file manifest C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Shfusion.dll.
  INFO: Manifest definition identity is shfusion, processorArchitecture = "X 86", publicKeyToken = "000000000000000", type = "win32", version = "1.0.0.0".
  INFO: Reference: Microsoft.VC80.CRT, processorArchitecture is "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50608.0"
  INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50608.0".
  INFO: Resolving reference for ProcessorArchitecture amd64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\amd64_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_09bcb209fad07c27.manifest
  NEWS: Policy redirected assembly version Editor.
  INFO: The Post policy assembly identity it is Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4016".
  INFO: Start the detection of assembly.
  NEWS: Try to detect manifest to C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: Manifest found at C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: End detection of assembly.
  INFO: Resolving reference Microsoft.VC80.CRT.mui, language = "*" processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50727.4016".
  INFO: Resolving reference for ProcessorArchitecture amd64.
  INFO: Resolving reference for the en-US culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_64\Microsoft.VC80.CRT.mui\8.0.50727.4016_en-US_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
  INFO: Found no manifesto for the en-US culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_64\Microsoft.VC80.CRT.mui\8.0.50727.4016_en_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
  INFO: Did not manifest for culture.
  INFO: End detection of assembly.
  INFO: Parsing file manifest C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: Manifest definition identity is Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4016".
  INFO: Activation context Creation succeeded.
  End activation context generation.

  The installation of windows vista has been very successful... Thank you!  I did a factory restore... had some conflicts and massive updates to do.  Problem was trying to do updates, especially for pilots, before the accidents that happen.  I managed to do it.  The only questions I could solve just not have been SidebySides mistakes.

  Thanks to YOUR INSTRUCTIONS FANTASTIC all sidebyside errors are now missing from event viewer. :)

  In case you might be interested, here's the historical data for net framework cleanup tool:
  History of changes
  -------------------

  December 3, 2007 - created the history file; any changes made before the creation
  This file is followed.

  December 4, 2007 - additions of extra cleaning for all versions of the .NET
  Framework on Tablet PC / Media Center, all versions of the
  .NET framework on Windows Server 2003, and all versions of the
  .NET framework on Windows Vista / Windows Server 2008.

  January 23, 2008 - addition of registry values to remove .NET Framework 1.0
  and 1.1 patches that were previously left out.

  29 January 2008 - addition of the product codes for .NET Framework 2.0 SP1, 3.0 SP1, and 3.5
  RTM versions.  Added a few 3.0 and 3.5 directories that have been
  already be left on the system.

  February 4, 2008 - added the cleanup who were initially registered on jobs
  December 4, 2007, but was inadvertently deleted.

  March 5, 2008 - fixed problem of deletion of registry which may affect 64-bit operating systems.

  March 6, 2008 - fixed an error of advapi32.dll on some caused by the previous operating systems
  Difficulty.

  April 30, 2008 - codes added product .NET Framework 3.0 beta to the list of
  items to remove during cleanup of .NET Framework 3.0.

  June 5, 2008 - corrected a problem with recovery of the Windows directory
  systems with active Terminal Server Services.

  June 6, 2008 - adding a /u switch to allow to run in unattended mode (which
  Displays the progress page but no other Interface and will require
  no user intervention).

  June 9, 2008 - disable the readme file and log file buttons if the tool is underway
  run in unattended mode.

  July 22, 2008 - added logging for detection of version of .NET Framework.  Update
  the tool to set the title of the window in cleanup.ini.

  August 14, 2008 - added support for the .NET Framework 2.0 SP2, .NET Framework
  3.0 SP2 and .NET Framework 3.5 SP1.

  November 26, 2008 - fixed a logic problem that caused the cleaning tool for not
  Delete the values to register 32-bit on Windows 64-bit versions.

  December 22, 2008 - added the version string is added to the log file.

  July 24, 2009 - added logic to properly clean the .NET Framework
  Windows 7.
  Added detection and logging for the .NET Framework 4.
  Avoid cleaning of mscoree.dll on Vista and higher.

  October 27, 2009 - fixed problem of withdrawal associated with VC ++ runtime files on Win9x
  and Windows 2000.

  October 29, 2009 - fixed problem of withdrawal associated with runtime files in VC ++ in the
  %WINDIR%\WinSxS directory on some operating systems.

  November 30, 2009 - fixed some problems of deletion of registry values that control which
  products appear in Add/Remove programs.

  December 9, 2009 - added logic to treat some types of errors and warnings if the tool
  don't report breaking in some specific scenarios.  Added a few
  new files and to remove .NET Framework registry keys
  steps of cleaning 3.0 and 3.5.

  March 17, 2010 - force the process exit code to get spread
  for the self-extracting installation package.

  April 29, 2010 - added support to clean the .NET Framework 4.

  November 16, 2010 - added logic to clean the cache of .NET Framework 4 police service
  record.

  December 31, 2010 - add a logic of protection against infinite loops when the withdrawal of
  registry keys.

  January 17, 2011 - fixed a bug that prevented the .NET Framework 4 available
  as an option of cleaning on Windows Server 2003 (x 86).

  August 16, 2011 - fixed a bug that prevented mscoree.dll come off, on some
  x 64 versions of Windows.

  19 October 2011 - add a command line switch to allow users to force cleanup
  a version of the .NET Framework even if BONE conditions normally
  could stop him.  It is a switch intentionally undocumented
  and should be used only in rare cases where the user includes
  the impact.

  Thank you once again for a happy Vista user!

• WRT54GL and Windows 7 log in question

  I have a network of several PC on my WRT54GL router - firmware 4.30.14 building 5, October 26, 2009

  All PC's are XP SP3 except a Win 7 PC

  When I access my WRT54GL from all of my XP computers, I connect at once and I'm done. I can access all the pages then configuration.

  When I connect with my Win 7 computer, I get the security pop Windows window whenever I click on a page or a new tab.
  I can see all of the pages and tabs without problem once I get the password again, but it's really annoying that he keeps asking

  for the log information for each new item, I click on.

  Checking her memorize my box of credentials is not good, it always ask again and again

  This is my first Windows 7 computer, not sure how to stop this behavior annoying.

  Any help on this is appreciated

  This is the window that will open all the time

  

  Update

  This seems to be a question of IE9

  I saw just the router with Firefox and Windows 7

  He only asked for username and password once and I was able to browse all the pages without further asked for info, log in.

  I'll go ahead and mark it as a solution because it seems a problem of IE9

• Impossible to install ORACLE 10 g, compatabitlity questions...?

  Hi friends,

  I'm unable to install Oracle 10 g enterprise edition on my laptop which has windows 7 Home Basic... I can even install with windows XP... but is comapatability of the questions here... could you please help me? My friends also have the same problem...!

  It is not compatible with Windows 7. Try the Vista compatibility mode.

  Here's a link: http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows

  It may be useful

  Die you a hero or you live long enough to become a villain... Black Knight

• Windows 7 xp pro using the log in question

  Windows 7 Pro xp mode will allow me is more access. Now, he asks a user name and password. I have never created one or the other. I tried all combinations of my IDs and passwords nothing helps. Can someone aswsist me?

  Hello khalida,.

  Thanks for posting your question on Microsoft Community!

  After reading your post, it seems you have a problem with the computer's performance while logging on to Windows XP mode.

  I suggest you to ask your question on the TechNet Forums.

  Windows Virtual PC and XP Mode.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps!

• Error in db oracle Linux log-in: ORA-01034, ORA-27101

  Hello world

  I got below error when log installed on Linux REDHAT 6.4 (11 g R2) oracle database.

  [oracle@LOM-NEYTR-RHEL-NEW1 dbhome_1] $ sqlplus

  SQL * more: Production version 11.2.0.1.0 Mon. Nov 16 15:29:08 2015

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Enter the user name: dmadmin
  Enter the password:

  
  ERROR:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  Linux-x86_64 error: 2: no such file or directory
  Process ID: 0
  Session IDs: serial number 0: 0

  =====================================

  is that someone has an idea about this. I tried to connect as sysdba and connected successfully, but

  When I give the command "start", it gives below error.

  [oracle@LOM-NEYTR-RHEL-NEW1 dbhome_1] $ sqlplus / as sysdba

  SQL * more: Production version 11.2.0.1.0 Mon. Nov 16 15:26:49 2015

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connect to an instance is idle.

  SQL > startup

  ORACLE instance started.

  Total System Global Area 1068937216 bytes

  Bytes of size 2220200 fixed

  817893208 variable size bytes

  243269632 of database buffers bytes

  Redo buffers 5554176 bytes

  Mounted database.

  ORA-03113: end of file on communication channel

  Process ID: 21048

  Session ID: 16 serial number: 3

  ==================================================

  Please help me on this.

  Hello

  1. thanks for sharing the alerts log. next time on neighbourhoods - when you receive error first source/watch is in the alert log

  2 see the errors below

  ORA-27072: IO file error

  Linux-x86_64 error: 25: Inappropriate ioctl for device

  ORA-19502: error on file '/home/oracle/app/oracle/product/11.2.0/dbhome_1/dbs/arch1_28_850998828.dbf of writing.

  
  

  Is for example you didn't know that error if information I google for example IOCtl (http://www.iitk.ac.in/LDP/LDP/lkmpg/2.4/html/x856.html) his dirver / core program allows to interact to with the device (as the hard drive is peripheral)

  Now oracle dbwr written to right something to when starting after the phase of mounting to the location above. Maybe more space to a tablespace.

  
  

  3. the first thing you need to make sure there is a space / Home for example at startup

  4. change (move all files to the different location) it's not good to hold sound/home/oracle which is General for all other users (staging of situation - home directory)

  Update - your last exit

  dev/map/vg_lomneytrrhelnew1-lv_home

  201915336 190056092 1602452

  100%

  / Home

  Its filled to 100%

  It may be useful

  -Pavan Kumar N