After that the BIOS update cannot start my Satellite L305-S5885

Similar Questions

• Tecra A11 - 11N - after that the BIOS update programs not loading now

  My model is Tecra A11 - 11N. I ran the BIOS update and now some of my programs, including ITunes, Nokia Ovisuite, payer VLC etc. are not running. I tried to uninstall and reinstall them, but same problems.

  In any case to come back before upgrade?

  Hi evangny,

  I also Tecra A11 in front of me and have installed latest version of BIOS but this didn't affect all installed programs. BIOS and installed programs are different.
  What you can do is load the default settings in the BIOS after the update.

  Can you be a bit more detailed?
  What exactly happens if you try to start these programs? You get an error message?

  You use the version preinstalled Windows from Toshiba?

• After that the BIOS update can not use Debian

  I upgraded to v3.70 Bios and now my Debian has following problem:
  at the start of the adage about stucks kernel:
  PCI: BIOS Bug: f0000000 MCFG area isn't E820 - reserved.

  Did I screw the upgrade (Win startup, run the bios update and follow the instructions)? Or is this normal?
  How can I know Toshiba, they have the bug in the BIOS?

  Stepan

  Hello

  After the BIOS update you can use delivered and supported operating system (recovery image)?

• When I update my Windows XP, I get a message that the 2 updates cannot be updated. Here is the error message

  When I put update of windows xp I receive message 2 updates cannot been done here is what I get = - other hardware - Microsoft HID Non-User Input data filter (KB 911895)
  -Other hardware - Microsoft HID Non - User Input data filter (KB 911895) CAN
  you help me? Thanks when I update my Windows XP, I get a message that the 2 updates cannot be updated.  Here is the Microsoft - other hardware - error message HID Non-User Input data filter (KB 911895)
  Microsoft - other hardware - HID Non-User Input data filter (KB 911895) can you please help me
  André

  Hi MrPeanut,

  Welcome to the Microsoft answers site.

  This problem can occur because the device sends data of strength of signal for Windows. These data can be interpreted as input device real, such as the movement of the mouse, button activity or strikes. Therefore, this transmission can prevent Windows mode 'sleep'. Windows must enter "sleep" mode to activate the screen saver.

  I suggest that you update the drivers for all devices on the computer entry. You can update the drivers from Device Manager and check.

  See the link for update drivers: update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work-good

  If the problem persists, then I suggest that you uninstall the update from Add/Remove programs in the control panel.

  Now, download you the link that resets the update reset Windows components from the following link: How to reset the Windows Update components?: http://support.microsoft.com/kb/971058

  Now start you the Windows updates and check.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  Have you tried these steps? If iTunes does not your iPad, iPhone or iPod - Apple Support

• SP 2 settles - gives a message telling me that the bios updated to the needs

  Original title : Sp 2 downloads ok, but used to install

  I have a dell latitude d820 32bits that originally had xp on it,

  I installed vista on it from a backup I did on an advent computer (purchased new mine).

  I managed to install ie9 on it, but it tells me that I need to install sp2,

  I tried to install after the download from windows update and microsoft own website, but always the same problem, I can't get sp2 to install even if ok, it will download

  I got a message telling me that the bios needs updating, and my opinion is that, even if the software came the computer still thinks it's a dell and this is the problem

  Hello
   
  1. What is the full error message?
  2. is the specific question of the installation of Windows Vista Service pack 2?
  3. you receive update of the BIOS message during the installation of SP2 or elsewhere?
   
  Method 1:
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2:
  
  Put the computer in a clean boot state, download and install the Windows Vista Service pack 2 and see if that helps.
  Download here:
  http://www.Microsoft.com/download/en/details.aspx?ID=15278
  Clean boot:
  Here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
   
  Method 3:
  Update (Flash) your BIOS
  The main function of your system BIOS is to recognize and initiate any material that your system is ready to be used. It is synonymous with updating the BIOS of the motherboard to the latest version of "Flash" BIOS. The times often requires a floppy drive must be installed on the system.
  Please visit the site of the manufacturer of your motherboard for instructions on how to check the version of your BIOS and tools, that you can use safely update your BIOS.
   
   
  Reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  
  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
   
   
  For more information, see:
  
  To find out what operating system is installed, follow these steps:
  (a) click Start right click my computer
  (b) click on properties

• Satellite A100 PSAA8K stuck in the BIOS after that the BIOS is flashed

  Hi all

  I used the utility to update the BIOS of Toshiba on this machine. It was working fine before, now it is blocked with the Toshiba Startup logo. Pressing F2 or F12 don't work. Pressing ESC. Gives the following error. No TPM or TPM has problem. Everything else seems as usual. It shows the BIOS 6.00, which is what I had in theory flashed to.

  I guess the flash gone bad. Is there a disaster for this recovery procedure?

  Hi guys

  It seems really turned something went wrong during the BIOS update process.
  Perhaps a new module ROM BIOS flashing could solve this problem.

  The point is that you need a BIOS version of special rescue and the drive to reflash the module ROM.
  But only the authorized service provider has such special rescue tool and only the ASP technician can reflash the BIOS.

  So maybe it's not a real solution but a tip how to get a solution
  I would recommend so contact the ASP in your country for the control of the laptop and a reflash BIOS.

  Best regards & good luck

• No GPU fan after upgrading the BIOS to 4.2 on Satellite P100-434

  Hi, I upgraded my BIOS today to version 4.2 and since the GPU fan only works during the splash screen, and once Vista has loaded, it never runs again, in addition, the CPU fan turns at a constant speed, and the screen has "shifted" to the right, so I quarter of the right hand of the screen on the left.
  As you can imagine, it's a little annoying, and to say that the GPU temp is 65deg. with 90deg all about processors. not too good for the material.

  Is could someone PLEASE tell me how I can downgrade the BIOS?

  I have fans and fences etc. are all and free from dust.

  I do turn all the appropriate toshiba of specific drivers, and I even tried to reinstall the NVidia one card.

  GeForceGo N-Vidia 7600

  Thanks in advance.
  Jack

  Someone else here had the same problem, according to the P100 support newsletters found here http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp you must update the nVidia Driver If you update BIOS v4.2

  Here is what says the newsletter:

  *
  Update the BIOS of the computer to the version 4.20 or newer:

  1. click on the following link to download the BIOS version 4.20 for Satellite P100. Save the file on the Windows desktop.

  You can also search for a newer version of this BIOS on Service and assistance from Toshiba site at support.tosiba.com.

  2. double-click on the file sp100v420.exe on the Windows desktop to start the driver installation.

  3. restart the computer.

  *
  Update the display of the computer to version 7.15.11.5666 or newer nVidia Driver:

  1. click on the following link to download the version of the nVidia 7.15.11.5666 display driver. Save the file on the Windows desktop.

  You can also search for a newer version of this driver on Service and assistance from Toshiba site at support.tosiba.com.

  2. double-click on the file driver_display_nvidia_os2007387a.exe on the Windows desktop to start the driver installation.

  3. restart the computer.

• Satellite P205D-4378 crashed so that the BIOS update

  Hello everyone,

  It is my first post on the forum, although I've read here a lot.

  My problem seems to be classic: had several problems with my Satellite P205D-4378 crash.
  Visited the Web from Toshiba site, they have a BIOS update that fixes the problems that I have. I do the update, CRAAAASH!, dead computer.

  Death seriously.

  Turn on the other computer, search, find a few websites on "crisis recovery disk Phoenix.

  I read religiously, run to the store, buy a FDD, some readers, usb, the Bios file download, rename, make the drive...

  Trembling with anxiety, I press FN + b, switch on the machine, and it works!

  Well well... at least the works of the Zombie fashion: pink LED, high speed fans, manages the USB FDD, begins the USB FDD, he read for a good two minutes! Then nothing.

  'It's ok, it'll be ok' I think. The starting block is a program that is not more than 4 k, the computer has no bios, impossible to use anything, and must digest a 1000 k bios.

  I wait, nothing happens.

  SO what now? I tried the 'start FDD' ten times at least. Last try, I waited all night! I Went sleep after the computer read the floppy).

  Whatever I do, once the disk has been read, nothing happens.

  I turn it off, I unplug it, I try with battery, no battery, I speak well, I insult, I pray, I cry, I swear... NOTHING WORKS!

  I do something wrong, somewhere.

  On my drive are the phlash16.exe, the minidos.sys and the bios.wph (extract from a file named AASA40. ROM, downloaded with the pack zip on the toshiba site)

  What should I do? I read it on some forums that computer makers like Dell and Compaq deliberately disable the Boot Block Flash, is the same thing with Toshiba?

  The latest version of the bios that I have downloaded is corrupted?

  Is it possible that my motherboard is physically by the update failed? In this case, is it easy to replace yourself?

  I don't want to be ripped off by Toshiba for repair, if the only thing that I miss so far is a combination of keys at the end of the flash Boot Block recovery...

  In short, I'm lost.

  No idea to this wonderful group of reflection?

  Thank you

  Baaharb.

  I think that the update of the BIOS based on windows is security more like an update of the traditional Bios.
  Why? Because using the traditional BIOS there is always a risk that the wrong BIOS would be used.
  The BIOS using focused on victory, this risk does not exist.

  I know a lot of people who uses a bad BIOS and damaged module BIOS ROM.

  Anyway. To show you, I think that there is one solution as mentioned by delvoie, you will have to contact the local ASP.

  See you soon

• Lenovo 3000 N500 4BG, flashed the BIOS and cannot start more!

  Hi there, bought a N500 yesterday I was updating drivers, everything worked ok and then I tried to Flash the BIOS with BIOS 6get12ww on site (today) and then after a stop, nothing works anymore.  It ends with the Blue error screen Windows.  I tried many ways to get the system up, so I can copy the old BIOS from HDD (WPHLASH seemed to make a backup before flashing), nothing works.  None of my Linux can start the machine, they are all stop in the middle of the process, Linux Mint starts, but the screen is not readable.

  Also, WinXP and Lenovo CD may not start in windows or the recovery console.

  So, how can I get a copy of old BIOS, or how I can recover from such a problem? No floppy drive, nothing can read hard drive (no CD or DOS or Windows Flash boot floppies could reach the hard drive).

  System has 4 GB of RAM, 250 GB drive HARD and cpu T3200.

  Help, please.

  People, problem has been found and resolved.

  It seems the old BIOS flashing, BIOS setting has changed the HDD SATA type was changed to something other than ID and correct that, regardless of the type of BIOS resolved the problem and the system works now.

  Paymaan.

• USB no longer works after that the BIOS flash to ABCN74WW on the new Z70-80

  Hello

  I started with the installation of Windows 7 on my brand new Z70-80 which worked well, worked USB 2.0 ports.

  After flash BIOS to ABCN74WW USB ports do not work any longer. I already tried soft reset BIOS by unplugging the power supply and the battery by pressing the power button for 20 seconds. USB ports are still inaccessible after that, a USB flashes for a moment, mouse LED is lit but no laser and no operation at all. Even when I start any new installation of windows.

  Is it of any known issues with this version of BIOS? Can I cancel the flash BIOS?

  Kind regards

  I do not remember on an option to backup the bios and certainly did not do. In any case, the upgrade from windows to 8.1 solved my problem...

• After recommending the bios update, hp dv6131od running xp pro sp3 will not load windows - is there a wa

  After installing an update of the bios recommended on the hp website my dv6131od running xp pro sp3 will not load windows

  Update does not seem to have problems - failure, lack of time for flash, backup, etc.

  boot sequence seems normal (finds it a bootable cd in the drive, etc.), but windows won't load in safe or other mode

  next steps?  is there a way to access the BIOS?

  Thank you

  There is a simple solution to this problem.  The HP Online Crash Analysis Team has finally responded to my email after 34 days.  I had given up hearing from them despite several requests to repeat.

  I had completely disassembled the laptop trying to find the bios setting the jumpers on the motherboard in response to an idea contained in one of the PM, I sent... all to nothing does not...

  OCAT told me to look in the BIOS under "system configuration" for the Native SATA support.  The last update of the BIOS resets this point 'activated', but that only works for Vista & Win 7.  This must be set to "disabled" for XP and previous operating system.

  I hope that this post will save someone having to wait 5 weeks invest hours of work for a solution that took 3 minutes!

• Re: Satellite P300-22F is crushed so that the BIOS update

  Hello
  I did an upgrade for the bios of my pc, and during the installation, the PC crashed.
  Now it does not start, screen black.
  What can I do?

  Thank you very much

  Mick

  > What can I do?
  You must contact a local technician of Toshiba ASP... Maybe the ROM module where BIOS is stored must be flashed

• After the BIOS update can not startup Satellite C640 using USB key

  After upgrading my bios Toshiba Satellite C640-10F (PSC02E) to WIN 2.00, I can't boot the laptop using USB key, when I checked the BIOS with F2, I was stunned because the USB port connected to the laptop has been labeled as FLOPPY drive. Y at - there no possibility to downgrade the BIOS?

  Thank you

  Stand by.
  Set the BIOS to default and after restarting, use F12 to get into the boot menu.
  USB option is available there?
  What is saved on your USB device? I mean why do you want to use device USB to boot from it?

• After that the recent update the icons on top of the desktop computer are missing along with the programs that are associated with

  After the recent updates KB890838, KB2515325, KB2522422, KB982018, KB2506928 at the top of the page on my desktop icons are missing. I tried to find the trash and evently it has been deleted. I can restore to before the update and it is corrected. How can I find and fix this problem?

  AlfredPhilbrick,

  See the following topics

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us >

  05/03 / 1109:41: 52 am