Windows 7 xp pro using the log in question

Similar Questions

• How much of my computers download Windows 8 Pro using the disc?

  Original title: windows 8

  I bought Windows 8 Pro for $ 39 and also bought the drive... I've downloaded on my desk... my question is how many of my computers can download Windows 8 Pro using the disc? Thank you.

  1 license, 1 computer. You can use the same disc but to update multiple computers if you have additional product keys (licenses).

  How to buy additional keys:

  Press the Windows key + X

  Click System

  Click on see details in the Windows Activation

  Click on the link: buy Windows to another computer

  http://www.Windows.com/buy

  Yes, you may be prompted to go through the installation routine with just the web installer of 5 MB, but you don't actually have to download, simply to purchase and the product key will be presented to you in the Upgrade Wizard (you also a copy is sent to your email address).

• I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play in 7.__it still doesn't react. What should I do? Please answer__

  I installed a game for windows XP and then used the troubleshooting tool to convert so that I can play at 7.
  It still fails. What should I do? Please answer

  Hello

  a. what game do you have installed?
  b. do you get errors trying to run the game in compatibility mode?

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  1. click on start.
  2. in the search box type eventvwr.msc, and then on enter.
  3. now, click Application in the event viewer (local).
  4. now locate the event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer 
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  You can try to perform the clean boot on your computer and check if that helps.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  To perform a clean boot on a computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
  For more information visit: http://support.microsoft.com/kb/331796

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  To restore your computer to a Normal startup mode, follow these steps:

  1. click on start in the box start the search.
  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  You can check its compatibility with windows 7 in the Compatibility Center.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Hope this information is useful.

• Can I do a fresh install of Windows 7 Home and use the old product key?

  Hello

  I got a laptop from a former employer who removed the hard drive before give me the computer.

  I installed a new hard drive and you want to do a fresh install.

  The previous operating system was Windows 7 Pro OA Enterprise Edition and I have the product key for it.

  Can I do a fresh install of Windows 7 Home and use the old product key?

  and after that I still increases to 10 Windows using the same product key?

  Concerning

  Regrow72

  If you have plans to upgrade to Windows 10 Home, I would skip trying to reinstall Windows 7 and go directly to Windows 10.

  You can use your family Windows 7 product key to install Windows 10, learn how:

  How to install and activate Windows 10 using your Windows 7 or Windows 8 product key

  Step 1: How to download official Windows 10 ISO files

  Step 2: how: perform a clean installation of Windows 10

  If you are experiencing problems activating Windows 10, see:

  Activate your Windows 10 license with Microsoft Chat support

  I recommend to go to Windows 10 now while you can, because Microsoft will stop the free upgrade offer at the end of July:

  Windows 10 free upgrade offer ends July 29 as planned

  Microsoft to remove Windows Notification Nag upgrade 10

  Resources:

  Windows Free Upgrade on schedule 10 to end July 29, 2016 - what are your options?

  If you still want to reinstall Windows 7 Home Premium, please see:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• How and where can I find my Macbook Pro using the model number

  How and where can I find my Macbook Pro "using the MODEL number" NOT the serial NUMBER please...

  Hello world:

  I would like to know more about my MacbookPro using model # is if there is a website or a program that I can type my model # so she'll tell me more on my computer...?

  http://www.EveryMac.com

• HP 1287c Windows 7: windows 7, try to use the model of hp 1287c hp 5302 keyboard does not

  have a hp 1287c windows 7 tries to use the model of hp 5302 keyboard does not respond

  try to use the old Hp keyboard model 5302 was for windows 2000 did not know if could use when I plug computor does not recognize he wonding if possible to work?

  45fmj

  Hello

  Well, the keyboard is now very cheap, the converter may not work correctly. After 16 years of him please give a rest.

  Kind regards.

• Problem ejecting USB Mass Storage Device "this device is currently in use. Close any programs or windows that might be using the device, and then try again. »

  Original title: problem ejecting USB Mass Storage Device

  When I try to eject safely my external hard drive safely I get an error with this title message telling me that "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "I did it. I also tried to close all programs running on the computer and it does not help. I also tried to restart the computer, and it also does nothing. If anyone has any ideas that might be useful please let me know.

  Hi a. Cook,

  (1) how long have you been faced with this problem?

  (2) is limited to any specific USB device?

  This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program.

  Method 1:

  (a) Download Process Explorer from the link below

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  (b) click on search, find handle or DLL (Dynamic Link Library) in the tool menu.

  (c) type the drive letter of the USB device in the handle or DLL substring text box and press the search button.

  (d) find the process and its PID (process identifier) in the following box.

  (e) with a view to the processes of the system tree, look for the process according to the dialog box find handle or DLL.

  (f) press Ctrl + H to display the handles in the view in the lower pane.

  (g) find the file according to the drive letter and right click, choose Manage close.

  Reference:

  
  Problem ejecting USB mass storage device
  http://support.Microsoft.com/kb/555665

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 2: You can see the steps in the link below by Diana d.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problem-ejecting-USB-mass-storage-deviceits-in-use/fd56805c-ED8E-491F-8a2b-39ed1c988a71

  Method 3: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

• my chat window was gonewhen I use the google chrome browser

  my chat window was gonewhen I use the google chrome browser

  Hello

  You must check with their forums and Google Chrome support.

  Support for Google Chrome
  http://www.Google.com/support/chrome/

  Google Chrome forums
  http://www.Google.com/support/forum/p/chrome?hl=en&utm_source=HC&utm_medium=LeftNav&utm_campaign=chrome

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• In Windows 7, when I use the bridge it cannot locate libraries and images here?

  In Windows 7, when I use the bridge it cannot locate libraries and images here?

  Libraries in Windows7 and bridge 4.0.

• How does ALBPMEngine record can be read other than using the log viewer

  Dear friends,
  
  Can anyone help on how ALBPMEngine newspapers can be read other than using the log viewer?
  
  Look forward to rsponse.
  
  see you soon

  Did you know that the display of the newspaper is a separate client application that can be installed and used separately? It is in the BPM_HOME/bin directory. That should allow you to ungroup it so you can use it for other applications. It can also be downloaded via the Task Manager.

  If you try to integrate some other system of surveillance of the newspaper, let us know. Can someone have built something already to do what you want.

  Mark

• Reinstall Windows 7 pro using the existing key

  I want to reinstall Windows 7 pro on my laptop. There is no change in the material, I have to purchase a new license or can I use my existing key?

  You can reinstall using the same product key if it is a retail license or if it came preloaded with your laptop.

  You may need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  ----------------------

  If it came preloaded on your computer:

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

• How to upgrade to Windows 8 Pro using the existing license key

  My PC of Windows 8.1 had a problem during an update of the system (indicated by the VIOLATION of dog of GUARD of DPC on the blue screen) last week and I had to ask the SONY service here to install Windows Vista again because I could not take any other corrective action (valuation, factory reset).  When I checked my receipt for my order for Windows 8, I noticed a link to download Windows 8 nd ade new that link took me to http://windows.microsoft.com/en-us/windows-8/upgrade-product-key-only.

  It seems that I can install Windows 8 again by following the instructions provided on the link above using my product key. My questions are:

  1 what procedure should I follow?

  2. If I reinstall Windows 8 in this way, will I be able to upgrade to Windows 8.1?

  Thank you for your help.

  Kind regards

  Bulend

  I would use this instead, so that you find yourself directly to 8.1 without having to install fast + upgrade.

  To create installation media Windows 8.1

• Cannot install applications through Microsoft store in Windows 8 Pro: using the internet through the proxy: detected 'No. Internet Connection' Error statement

  I study in a University, and we have access to the internet through the proxy. We just need to put in the proxy port: in the settings of internet explore and authentication additional etc. is not necessary to access the internet. Everything else is working well, including windows update and even browse apps in the store of Ms. But I'm unable to install any application. Help, please.

  In fact here in ITI, all our internet traffic is routed through a proxy (to stop the torrent, filter things etc.). To remove the proxy is not an option.

  I solved the problem by using the following commands as an administrator:
  netsh
  WinHTTP
  import proxy IE

• When I closed my Windows Vista computer, it reached the "Logging Off" screen and seems stuck.

  Sporadically, when I turned off my computer, it reached the "Logging Off" screen and seems stuck.  I walked away from my computer for a returned more than an hour to find the screen always showing "Logging Off" with the small circle in the middle of spinning.  The only way I can close down is to do it manually and then when I use the computer at a later date, I ger the message that my computer has been shut down improperly and I should log in safe mode.  This happened only since I upgraded to Windows Vista.  My computer is a Toshiba laptop Satellite P105-S6147.

  original title: Shutting Down computer

  Hello

  Please, try the suggestions made by the former MVP Malkeleah in the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Windows-stuck-at-logging-off-screen-after-trying/d99659e2-03d4-4b18-b3f1-cba3a438f07e

• 7 merger, El Capitan, dual display: Windows now refuses to use the second screen

  Fusion 7.1.2

  End 2012 27 "iMac (2560 x 1440, 2.9GHz i5, 24GO RAM) with a 24 '' Dell Ultrasharp (1920 x 1200) connected by a Thunderbolt-HDMI connector cable.

  Guest operating system Windows 7 (and a couple of VM Ubuntu, not relevant here).

  Before, I would start merging and Windows 7 would start automatically, as it has to do. He will start in his own space and use two screens, with the windows desktop 'main' (with the taskbar on the screen of the Mac) and the Dell used to extend space office (just like OSX).

  I just upgraded to OSX to El Capitan and now it's borked:

  1 Windows 7 starts automatically with Fusion (despite still be configured for this purpose). It is a minor annoyance but nothing more.

  2. that's the real problem:

  Windows displays the "BIOS" screen, and then the graphic screen "starting windows", then goes black. In preview VM library, I can see the login screen, but in the space of Windows, nothing. Just black.

  When it happened first, I disconnected the monitor Dell, rebooted, logged on to Windows on one screen, then plugged the Dell back in and it worked. However, reconnected the external monitor on each startup of the machine is not my idea of fun or "just work".

  I changed the display settings of VM Win7 molten (changed "use full resolution for the retina display" section, "Scaled high resolution" 'Unity only' drop-down to "all display modes" and now I can see the Windows login screen in half the width and height of the main screen.) If I log in I get two desktops to a Windows display value, crammed into the width, and half of the height of the 27 "display, with nothing on the external monitor. No amount of reconnected does not change this.

  I restarted the VM and OSX more than once since upgrading to El Capitan, so a simple reboot won't be the solution.

  Help!

  He drives me crazy, any suggestions?

  I had another couple of VM Ware support calls and there is a solution (which works for me) and a fix promised in the next version of Fusion 8 (I presume it comes to version 8.0.2) which should be days (rather than weeks) away.

  The fix may or may not be folded in to Fusion 7.

  The workaround is: parameters of OSX--> Mission control--> check "screens have a separate space.

  The downside is that when dragging between spaces, you often have to swipe the two screens, top menu bars have more two screens in OSX, but I can cope with it for a few days.