Oracle error in OBIEE 11 g reports
Hi all
We are facing a strange question to OBIEE 11 g. We have about 10 pages of dashboard. in these pages a few reports throwing below error.
ORA-01722 invalid number to BEAK
These reports have worked for at least one year. There is no problem. But since yesterday, this error is popping up. got session SQL and executed in DB, physical SQL works very well in DB, but logical SQL throw (same error) in the database. What could be the problem? any help will be much appreciated.
Thank you
AJ
Check this ORA-01722 - Oracle FAQ
for the data of yesterday
Tags: Business Intelligence
Similar Questions
-
Hello all,.
One of our backups RMAN fails with the following error message. Any suggestions would be greatly appreciated.
==================================================================================================
From backup 2008-12-30 22:03:47
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the backup command to 2008-12-30 22:03:47
RMAN-06004: the recovery catalog database ORACLE error: ORA-00904: invalid identifier
RMAN >
RMAN > #BACKUP # ARCHIVELOG delete all '% d_bkp_al_ % t_Set % s_Piece %p' entry FORMAT;
2 >
3 > # DELETE ARCHIVELOG until ' SYSDATE-7 ";
4 >
5 > # check if the database can be restored
6 > RESTORE DATABASE # VALIDATE;
7 >
8 > # check if controlfile can be restored
9 > #RESTORE # CONTROLFILE to ' / backups/admin/custpr/custpr_bkp_cntlfile.ctl' VALIDATE;
10 >
11 > # check if archivelogs for these past two weeks can be restored
12 > # RESTORE ARCHIVELOG FROM TIME ' SYSDATE-7' VALIDATE ';
13 >
14 > #-check all backups on backup media are intact
15 > # CROSSCHECK BACKUP OF DATABASE;
16 >
17 > #-display based on a list of files that need to be stored on the retention
18 > policy #. For this case study, the files that do not have at least 1 backups
19 > # will be reported.
20 > REPORT NEED backup.
RMAN retention policy apply to the order
RMAN retention policy is set to 7 days recovery window
Report of the files whose recovery needs more 7 days of archived newspapers
Days of files name
---- ----- -----------------------------------------------------
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of command report at 2008-12-30 22:03:48
RMAN-06004: the recovery catalog database ORACLE error: ORA-00904: invalid identifier
RMAN >
RMAN > #-remove unnecessary backups. This command deletes the backups based on the
2 > retention policy of #.
3 > # commented DELETE OBSOLETE - TSM not configured to remove on 68
4 > #DELETE # OBSOLETE;
5 >
6 > #-complete list of the existing backups
7 > LIST BACKUP;
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the list command at 2008-12-30 22:03:49
RMAN-06004: the recovery catalog database ORACLE error: ORA-00904: invalid identifier
RMAN >
RMAN > # end of file.
2 > * end-of-file *.
RMAN >
Published by: ORA_UMAIR on December 31, 2008 07:51No help is possible.
You publish a file of newspaper only, and can not see the command that failed.
Also you include, contrary to the recommendation in the post on Forums label, the complete version number of 4-digit.
This is important because they either has an error in your script that does not find RMAN or you hit a bug.-----
Sybrand Bakker
Senior Oracle DBA -
Error-2584 occurred in DIAdem report
New to tiara,
I am running DIAdem 2010, LabVIEW 2010 and Windows 7. When I try to run the control example Multipage Report.vi I get the following error.
Error-2584 occurred in DIAdem report
Possible reasons:
LabVIEW: Tiara could not be started. You have DIAdem 9.1 Service Pack 2 or later installed to use the report Express VI tiara.
If I open the tiara Express vi the target and Select Layout fields are grayed out.
I have download the Toolkit LabVIEW DIAdem connectivity but "broken vi".
Hi Linda Patrick,.
The error you receive may be caused by the order in which your software has been installed.
The usual installation order would be:
LabVIEW
Modules of
Tool boxes
Drivers
Tiara
It should be probably to remove and reinstall the tiara on your system to see if that solves your problem.
After the back to let me know how you go.
Thank you
-
Get the error message "send and receive reported an error (0x800CCC92): your e-mail server rejected your login. '. Check your username and password in your account properties.
I'm using Outlook 2002 on the XP Pro operating system.It lasts for almost a year, but I managed to work around the issue since it was started using a different outgoing SMTP user name and the password. (More settings, outgoing server tab, log in using...) Now it has stopped working.
There are four machines at this place and all suffer from the same problem. I use a LinkSys RVS4000 router. The previous Linksys router has also had the same problem so I replaced, thinking he can correct the problem, he didn't.
Troubleshooting:
a. I am able to recreate the account on another machine to a different place and it works.
b. I can take an account of my machine, create in this place and it will not work.
c. accounts deleted and created a new, did not
d. has replaced the router to the place with a new Linksys router
e. contacted support for ISP, (Time Warner), they accuse the hosting company
d. contacted support for hosting of the company (HostCentric) they blame the ISP
c. confirmed username and passwords are correct.
e. There are 4 machines in this place with different addresses. All started having this problem/error the same day within hours
f. may receive emails cannot be sent.http://expwinproblems.blogspot.com/2010/11/error-messages-in-Outlook-when-send-or.html
-
I installed Win7 Pro 64 - bit about 4 - 5 times with the same original key on the same computer, but now I have a problem; When I want to activate key, always error has occurred with this 0xC004C020 with description error Code: the activation server reported that the Multiple Activation key has exceeded its limit. How do I fix this problem?
Hello
Please find your resolution from this link: http://technet.microsoft.com/en-us/library/ff793399.aspx
MAKs by design have a limited number of activations. Contact the Microsoft Activation call center.
Hope that helps.
Kind regards
Joel
-
Hello guys
Hope all are well
My Question is this.
When you do and. / opmnctl startall or even a startproc for BI Scheduler I get the following error.
[2013 09-26 T 13: 03:57.000 + 02:00] [OracleBISchedulerComponent] [ERROR: 1] [] [] [ecid:] [tid: a0ee1720] [68008] Scheduler error: []
Current table: S_NQ_JOB.
[nQSError: 17001] Oracle error code: 12154, message: ORA-12154: TNS: could not resolve the connect identifier specified
the OCI call OCIServerAttach.
Current table: S_NQ_JOB_PARAM.
[nQSError: 17001] Oracle error code: 12154, message: ORA-12154: TNS: could not resolve the connect identifier specified
the OCI call OCIServerAttach.
Current table: S_NQ_INSTANCE.
[nQSError: 17001] Oracle error code: 12154, message: ORA-12154: TNS: could not resolve the connect identifier specified
the OCI call OCIServerAttach.
Current table: S_NQ_ERR_MSG.
[nQSError: 17001] Oracle error code: 12154, message: ORA-12154: TNS: could not resolve the connect identifier specified
beak call OCIServerAttach... Errors encountered initializing database back-end of the Planner, check configuration of database.
If anyone can help?
Concerning
Benoit
Check this Doc ID 1340097.1
-
ToolTip in OBIEE 11 G reports when we spend on its data.
Hello gurus,
I have a requirement where I need to display the ToolTip in OBIEE 11 G reports when it hovers over its data. For example, if I have a column in a report that shows "serial No." say the column data is 1,2,3,4,5 etc. when I hover over 1, it should display name corresponding to it. When I switch to 2, it should display a different name.
Those values that will be displayed on score action can be hard-coded, they are static values.
Thanks in advance!I got how to do this. I posted here - http://isimplyshare.com/different-tooltip-for-different-rows-when-user-hovers-on-it-in-obiee-11g-reports/
-
IMP-00058: ORACLE error 1017 met ORA-01017: invalid username/passwo
I want to run the Import tool with the user's system, I do not see as you see below script:
I read the following thread:D:\TÖÖ\exp_ddl.dmp>sqlplus system/[email protected] as sysdba SQL*Plus: Release 10.2.0.1.0 - Production on Mon Oct 4 16:40:58 2010 Copyright (c) 1982, 2005, Oracle. All rights reserved. Connected to: Personal Oracle Database 10g Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options SQL> ALTER USER "SYSTEM" IDENTIFIED BY VALUES 'a'; User altered. SQL> quit; Disconnected from Personal Oracle Database 10g Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options D:\TÖÖ\exp_ddl.dmp>imp userid=system/[email protected] file=exp_cas_ddl.dmp log=exp_ca s_ddl.log full=y Import: Release 10.2.0.1.0 - Production on Mon Oct 4 16:41:31 2010 Copyright (c) 1982, 2005, Oracle. All rights reserved. IMP-00058: ORACLE error 1017 encountered ORA-01017: invalid username/password; logon deniedUsername: system Password: IMP-00058: ORACLE error 1017 encountered ORA-01017: invalid username/password; logon deniedUsername: SYSTEM Password: IMP-00058: ORACLE error 1017 encountered ORA-01017: invalid username/password; logon denied IMP-00005: all allowable logon attempts failed IMP-00000: Import terminated unsuccessfully D:\TÖÖ\exp_ddl.dmp>sqlplus system/[email protected] as sysdba SQL*Plus: Release 10.2.0.1.0 - Production on Mon Oct 4 16:41:53 2010 Copyright (c) 1982, 2005, Oracle. All rights reserved. Connected to: Personal Oracle Database 10g Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options SQL> select sysdate from dual; SYSDATE --------- 04-OCT-10 SQL> quit; Disconnected from Personal Oracle Database 10g Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options D:\TÖÖ\exp_ddl.dmp>sqlplus system/[email protected] SQL*Plus: Release 10.2.0.1.0 - Production on Mon Oct 4 16:46:13 2010 Copyright (c) 1982, 2005, Oracle. All rights reserved. ERROR: ORA-01017: invalid username/password; logon denied Enter user-name:
That did not help much either i think.
I want is to have a single command that works "Imp" and gives the name tns-database as an input parameter and the user_id parameter must be in pramaters. I can run this way Import?What about:
alter user system identified by A;
I guess that the command "change user
identified by values '" is the command to settig the encrypted password.
Only, it will be useful carry passwords of a database to another, but do not for the definition of passwords initially.Edited by: hartmutm the 04.10.2010 07:22
-
Hi, I have a problem: I'm inserting information from one table to other tables, but if there is an error (for example, the duplicate primary key), I have to put this information in a newspaper... I have two questions: the journal should be another table (for example with the sysdate and a description of the error)? The other: How can I register Oracle errors in the log?
Thank youProbably, you write a PL/SQL script. If so use, for example,.
Declare Cursor c is select rowid, ... --souce data Begin for r in c loop begin insert into destination_tab ... exception when others then insert into error_log (record_rowid,error) values (r.rowid,sqlcode); end; end loop; End; /
Max
-
IMP-00003: ORACLE error 959
Hi all
Am import of production dump in our UAT environment.
Import failed with the below error:
IMP-00003: ORACLE error 959
ORA-00959: tablespace "TMEDX11" does not exist
This means that the import was stopped with this error? or it will continue after this error?... am tracking this... import don't move any more than that.objects after that have useful, likely created in the target DB tablespaces?...
Do I have to kill this process and continue to import all the items again?
Please notify
10.2.0.4 on solaris
KaiIf the target table is partitioned in the same way as the source, put IGNORE = o
in your import command. -
Hello
When I try to recreate a link to oracle after installation of the patch group, following error occurred.
-Link Oracle
RM f/opt/oracle/10 g/rdbms/lib/oracle
/ usr/CCS/bin/ld o/opt/oracle/10 g/rdbms/lib/oracle-L/opt/oracle/10 g/rdbms/lib/-L/opt/oracle/10 g/lib/dy - /opt/oracle/10g/lib/prod/lib/crti.o /opt/oracle/10g/lib/prod/lib/crt1.o /opt/oracle/10g/rdbms/lib/opimai.o /opt/oracle/10g/rdbms/lib/ssoraed.o /opt/oracle/10g/rdbms/lib/ttcsoi.o /opt/oracle/10g/rdbms/lib/defopt.o z - allextract-lperfsrv10 - z defaultextract /opt/oracle/10g/lib/nautab.o /opt/oracle/10g/lib/naeet.o/opt/oracle/10 g. lib / naect.o /opt/oracle/10g/lib/naedhs.o /opt/oracle/10g/rdbms/lib/config.o-lserver10-lodm10-lnnet10-lskgxp10-lsnls10-lnls10-lcore10-lsnls10-lnls10-lcore10-lsnls10-lnls10-lxml10-lcore10-lunls10-lsnls10-lnls10-lcore10-lnls10-lhasgen10-lcore10-lskgxn2-locr10-locrb10-locrutl10-lhasgen10-lcore10-lskgxn2-lclient10-lvsn10-lcommon10-lgeneric10 - lknlopt ' si /usr/ccs/bin/ar tv /opt/oracle/10g/rdbms/lib/libknlopt.a | grep xsyeolap.o > / dev/null 2 > & 1; then echo '-loraolap10 '; fi'-lslax10-lpls10-lplp10-lserver10-lclient10-lvsn10-lcommon10-lgeneric10 ' if [f - opt/oracle/10g/lib/libavserver10.a]; then echo '-lavserver10 '; else echo '-lavstub10 '; fi' "if [f - opt/oracle/10g/lib/libavclient10.a]; then echo '-lavclient10 '; fi' - lknlopt-lslax10-lpls10-lplp10-ljox10-lserver10-lclsra10-ldbcfg10-locijdbcst10 - lwwg "/ opt/oracle/10 g/lib/ldflags»-lnsslb10-lncrypt10-lnsgr10-lnzjs10-ln10-lnnz10-lnl10-lnro10 cat ' cat/opt/oracle/10 g/lib/ldflags»-lnsslb10-lncrypt10-lnsgr10-lnzjs10-ln10-lnnz10-lnl10 - lmm-lsnls10-lnls10-lcore10-lsnls10-lnls10-lcore10-lsnls10-lnls10-lxml10-lcore10-lunls10-lsnls10-lnls10-lcore10-lnls10" / opt/oracle/10 g/lib/ldflags»-lnsslb10-lncrypt10-lnsgr10-lnzjs10-ln10-lnnz10-lnl10-lnro10 cat ' cat/opt/oracle/10 g/lib/ldflags»-lnsslb10-lncrypt10-lnsgr10-lnzjs10-ln10-lnnz10 - lnl10-lsnls10-lnls10-lcore10-lsnls10-lnls10-lcore10-lsnls10-lnls10-lxml10-lcore10-lunls10-lsnls10-lnls10-lcore10-lnls10 ' if/usr/ccs/bin/ar tv /opt/oracle/10g/rdbms/lib/libknlopt.a |»» "» grep 'kxmnsd.o' > / dev/null 2 > & 1; then echo ""; else echo '-lordsdo10 '; fi'-lctxc10-lctx10-lzx10-lgx10-lctx10-lzx10-lgx10-lordimt10-lsnls10-lnls10-lcore10-lsnls10-lnls10-lcore10-lsnls10-lnls10-lxml10-lcore10-lunls10-lsnls10-lnls10-lcore10-lnls10-lsnls10-lunls10-lsnls10-lnls10-lcore10-lsnls10-lnls10-lcore10-lsnls10-lnls10-lxml10-lcore10-lunls10-lsnls10-lnls10-lcore10-/opt/SUNWcluster/lib -R lnls10 « cat /opt/oracle/10g/lib/sysliblist » : / opt/oracle/10 g/lib : / opt/ORCLcluster/lib / -Y, P, : / opt/SUNWcluster/lib : / opt/ORCLcluster/lib / : / usr/ccs/lib : / usr/lib - Qy -lc - lrt - laio-lposix4 - lkstat -lm/opt/oracle / 10g/lib/prod/lib/CRTN.o - lthread - lpthread
LD: WARNING: opt/oracle/10g/rdbms/lib//libslax10.a(pxslax.o) file: bad class ELF: ELFCLASS64
The undefined first referenced
symbol in the file
pxngoto opt/oracle/10g/lib//liboraolap10.a(xsoqmpax.o)
pxnmove opt/oracle/10g/lib//liboraolap10.a(xsoqmpar.o)
pxnmstt opt/oracle/10g/lib//liboraolap10.a(xsoqmpar.o)
pxnrcov opt/oracle/10g/lib//liboraolap10.a(xsoqmpar.o)
pxnspus opt/oracle/10g/lib//liboraolap10.a(xsoqmpar.o)
LD: fatal: symbol referencing errors. No output written to/opt/oracle/10 g/rdbms/lib/oracle
Error code 1
make: fatal error: command failed for target ' / opt/oracle / 10 g/rdbms/lib/oracle.
What to do to fix this problem?
Of more, when I try to connect as "sqlplus / as sysdba" he says "TNS: protocol error" and if I tape "sqlplus sys/passwod@oracle_sid as sysdba" she says "Segmentation Fault (core dumped). Under $ORACLE_HOME/rdbms/lib and $ORACLE_HOME/bin, 'oracle' is 0 bytes.
Thanks in anticipation,
OganHello
Please check with Support of ORACLE and worse... I suggest that it is the best case... for now.
-Pavan Kumar N
-
Oracle connection error installing OBIEE 11 g
Hello
I am getting INST-08030 error: cannot connect to the DB with the current credentials.
Then that easily able to connect to the schema through SQL Plus am.
The connection string is localhost:1521:orcl
and I ping localhost and checked on the service using tnsping and they are all successful.
Can you please help here to understand what is the problem, is it to do anything with the Java connectivity or something?
Also one thing now, I noticed is that when I try to connect to the instance of sql * plus it work very well, but whenever I try to connect enterprise manager from the linkhttps://localhost:1158 / em
It is to launch an error connecting to the host as a user SYSTEM has failed. ERROR: Invalid username / password
Do not know what is the error here and how I do it...
------------------------------------------------------------------------------
C:\Users\Admin > tnsping orcl
AMT Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on May 22, 2014 11:52:28
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Use settings files:
C:\app\Admin\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521)) (CO
NNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
OK (0 msec)
-----------------------------------------------------------------------------------------
Thank you
S
Hi Bianca,.
The format of the string above did not work, I found it in some blogs which was not correct.
I found the problem, for some strange reason that localhost is replaced to 127.0.0.1 (from a few DNS settings?) as in the hosts, that entry has been commented on by a "#" so I do not know where he is picking up.
After replacing the default localhost defining 127.0.0.1 it worked fine, infact I also disabled MS Lookup adapter from the network and settings and it worked.
Van
S
-
Oracle 12 c not not opening Report Builder
Hi all
I'm installing Oracle 12 c forms and reports.
For me report generator does not open. It throws error as ca.dll not found.
and I started the report server using startManagedWeblogic WLS_REPORTS
when checking the url http://localhost:9002 / reports/rwservlet/showjobs ?
It shows error like REP-52266: the current report server
How to solve these problems?
Thank you
Su.GI
I think that you should start the rwbuilder.bat not find files exe for rwbuilder.bat file and double click it it will start the generator of reports for you.
After you have started all the below
startNodemanager,
startWeblogic,
startManagedWeblogic WLS_FORMS,
startManagedWeblogic WLS_REPORTS
Step forward
Example of
1 - run wlst.cmd/wlst.sh ORACLE_HOME/oracle_common/common/bin
2 - connect on AdminServer.
Connect ("WebLogic", "weblogic_password", "hostname:7001")
3 run the following command from wlst.
createReportsToolsInstance (instanceName = 'reptools1', 'AdminServerMachine' = machine)
B. create the stand-alone reporting server
Example of
1 - run wlst.cmd/wlst.sh ORACLE_HOME/oracle_common/common/bin
2. connect to the AdminServer.
Connect ("WebLogic", "weblogic_password", "hostname:7001")
3 run the following command from WLST.
createReportsServerInstance (instanceName = 'rep_server1', 'AdminServerMachine' = machine)
This will create a new independent Reports Server named "rep_server1".
4 - launch the report server.
Note: The examples use ports and the default credentials.
C. start / stop the stand-alone reporting server
Go to the DOMAIN_HOME/bin folder and issue the following commands:
startComponent.cmd or startComponent.sh [name of report server]
or
stopComponent.cmd or stopComponent.sh [name of report server]
Then follow my approach I gave above.
I think your problem will be solved.
-
Collection of Oracle error REP-51019 submitting parameter Page
We have improved our linux at 11 GR 2 report server. Now when we run Oracle reports over https, the parameter page shall submit the parameters via http. Initially successful, the user connects to the report server with sso and https. When the user submits the page parameter, an error occurs and the server logs show REP-51019.
If you look at the page source on the web page displayed in the page parameter, it displays'form method=post action = "http...". » . If we run the same report server reports different (10g or 11g R2) the parameter page shall submit to the server with https and working properly.
Y at - it a report server that can solve this problem?
Normal configuration is SSL between the web browser and the OHS and the communication between the SST and WLS_REPORTS is in HTTP.
Here are the steps:
1 backup of file INSTANCE_HOME/config/OHS/ohs1/ssl.conf
2 - Edit the INSTANCE_HOME/config/OHS/ohs1/ssl.conf file inside the
directive add the following section
Example of
SetHandler weblogic-Manager
WebLogicHost YOUR_HOST_NAME
WebLogicPort WLS_REPORTS_HTTP_PORT
WLProxySSL WE
3. save the fichier.conf and re - start OSH
4. This step will allow the plugin (mod_wl_ohs.conf) send a header to WLS_REPORTS indicating that the original request was an SSL request.
Activate 'active WebLogic plug-in' in Console WLS.
[+] Go to WLS Console--> servers--> WLS_REPORTS--> Configuration--> General
[+] Click on 'Advanced' link at the bottom of the page
[+] Click the "Lock & Edit" button to allow the changes to this page
[+] Check the box for "WebLogic plug-in enabled."
[+] Click 'Save' to save the changes
[+] Click on the button 'Activate changes' to activate the changes of WLS_REPORTS managed server
[+] Restart the managed server WLS_REPORTSNote: Even in a cluster environment that this setting ("active plug-in WebLogic") should be checked at each WLS_REPORTS server in the cluster managed
Now when you get the form of reports displays parameter and check the HTML (view page source) you will see references to the HTTPS protocol.
-
Installation of DBD::Oracle error
I installed following the customers oracle
Oracle - instantclient11.2 - basic - 11.2.0.1.0 - 1.x86_64.rpm
Oracle - instantclient11.2 - devel - 11.2.0.1.0 - 1.x86_64.rpm
Oracle - instantclient11.2 - sqlplus - 11.2.0.1.0 - 1.x86_64.rpm
AND I put below variables:
LD_LIBRARY_PATH=/usr/lib/Oracle/11.2/Client64/lib
ORACLE_HOME=/usr/lib/Oracle/11.2/Client64
Then I tried installed
[root@localhost ~] # cpan DBD::Oracle
but still, I get the following error
[root@localhost ~] # cpan DBD::Oracle
CPAN: Storable loaded Ok (2.45)
Will read ' / root/.cpan/Metadata'
Database was generated on Friday, February 28, 2014 07:41:02 GMT
Installation running for the module "DBD::Oracle.
CPAN: YAML loaded ok (v0.88)
Make running for P/PY/PYTHIAN/DBD-Oracle-1.70.tar.gz
CPAN: Digest::SHA loaded ok (v5.47)
CPAN: Compress::Zlib loaded ok (v2.063)
Checksum /root/.cpan/sources/authors/id/P/PY/PYTHIAN/DBD-Oracle-1.70.tar.gz ok
DBD-Oracle - 1.70.
DBD-Oracle-1.70/lib/
DBD-Oracle-1.70/lib/DBD/
DBD-Oracle-1.70/lib/DBD/Oracle.pm
DBD-Oracle-1.70/lib/DBD/Oracle/
DBD-Oracle-1.70/lib/DBD/Oracle/GetInfo.pm
DBD-Oracle-1.70/lib/DBD/Oracle/Troubleshooting/
DBD-Oracle-1.70/lib/DBD/Oracle/Troubleshooting/Win32.pod
DBD-Oracle-1.70/lib/DBD/Oracle/Troubleshooting/Vms.pod
DBD-Oracle-1.70/lib/DBD/Oracle/Troubleshooting/Hpux.pod
DBD-Oracle-1.70/lib/DBD/Oracle/Troubleshooting/Aix.pod
DBD-Oracle-1.70/lib/DBD/Oracle/Troubleshooting/Sun.pod
DBD-Oracle-1.70/lib/DBD/Oracle/Troubleshooting/Macos.pod
DBD-Oracle-1.70/lib/DBD/Oracle/Troubleshooting/Linux.pod
DBD-Oracle-1.70/lib/DBD/Oracle/Troubleshooting/Cygwin.pod
DBD-Oracle-1.70/lib/DBD/Oracle/Troubleshooting/Win64.pod
DBD-Oracle-1.70/lib/DBD/Oracle/Troubleshooting.pod
DBD-Oracle-1.70/lib/DBD/Oracle/Object.pm
DBD-Oracle-1.70/oci.def
DBD-Oracle-1.70/Makefile.PL
DBD-Oracle - 1.70 / MANIFEST
DBD-Oracle-1.70/ocitrace.h
DBD-Oracle - 1.70 / changes
DBD-Oracle - 1.70 / LICENSE
DBD-Oracle-1.70/README.help.txt
DBD-Oracle-1.70/README.mkdn
DBD-Oracle - 1.70 / INSTALL
DBD-Oracle-1.70/Oracle.xs
DBD-Oracle - 1.70 / CONTRIBUTORS
DBD-Oracle-1.70/META.json
DBD-Oracle-1.70/oci8.c
DBD-Oracle-1.70/META.yml
DBD-Oracle-1.70/Oracle.h
DBD-Oracle-1.70/dbivport.h
DBD-Oracle - 1.70 / typemap
DBD-Oracle-1.70/t/
DBD-Oracle-1.70/t/23wide_db_al32utf8.t
DBD-Oracle-1.70/t/00versions.t
DBD-Oracle-1.70/t/22nchar_al32utf8.t
DBD-Oracle-1.70/t/31lob.t
DBD-Oracle-1.70/t/lib/
DBD-Oracle-1.70/t/lib/ExecuteArray.pm
DBD-Oracle-1.70/t/10general.t
DBD-Oracle-1.70/t/28array_bind.t
DBD-Oracle-1.70/t/26exe_array.t
DBD-Oracle-1.70/t/14threads.t
DBD-Oracle-1.70/t/rt74753-utf8-encoded.t
DBD-Oracle-1.70/t/23wide_db.t
DBD-Oracle-1.70/t/22nchar_utf8.t
DBD-Oracle-1.70/t/31lob_extended.t
DBD-Oracle-1.70/t/000-report-versions-tiny.t
DBD-Oracle-1.70/t/12impdata.t
DBD-Oracle-1.70/t/36lob_leak.t
DBD-Oracle-1.70/t/24implicit_utf8.t
DBD-Oracle-1.70/t/38taf.t
DBD-Oracle-1.70/t/21nchar.t
DBD-Oracle-1.70/t/70meta.t
DBD-Oracle-1.70/t/15nls.t
DBD-Oracle-1.70/t/39attr.t
DBD-Oracle-1.70/t/rt85886.t
DBD-Oracle-1.70/t/34pres_lobs.t
DBD-Oracle-1.70/t/56embbeded.t
DBD-Oracle-1.70/t/40ph_type.t
DBD-Oracle-1.70/t/55nested.t
DBD-Oracle-1.70/t/30long.t
DBD-Oracle-1.70/t/32xmltype.t
DBD-Oracle-1.70/t/58object.t
DBD-Oracle-1.70/t/50cursor.t
DBD-Oracle-1.70/t/80ora_charset.t
DBD-Oracle-1.70/t/51scroll.t
DBD-Oracle-1.70/t/01base.t
DBD-Oracle-1.70/t/20select.t
DBD-Oracle-1.70/t/nchar_test_lib.pl
DBD-Oracle-1.70/t/23wide_db_8bit.t
DBD-Oracle-1.70/t/60reauth.t
DBD-Oracle-1.70/t/rt13865.t
DBD-Oracle-1.70/t/25plsql.t
DBD-Oracle-1.70/examples/
DBD-Oracle-1.70/examples/japh
DBD-Oracle-1.70/examples/oradump.pl
DBD-Oracle-1.70/examples/ora_explain.pl
DBD-Oracle-1.70/examples/commit.pl
DBD-Oracle-1.70/examples/bind.pl
DBD-Oracle-1.70/examples/curref.pl
DBD-Oracle-1.70/examples/ex.pl
DBD-Oracle-1.70/examples/read_long_via_blob_read.pl
DBD-Oracle-1.70/examples/tabinfo.pl
DBD-Oracle-1.70/examples/proc.pl
DBD-Oracle-1.70/examples/sql
DBD-Oracle-1.70/examples/mktable.pl
DBD-Oracle-1.70/examples/inserting_longs.pl
DBD-Oracle-1.70/examples/README
DBD-Oracle-1.70/mkta.pl
DBD-Oracle - 1.70 / Todo
DBD-Oracle-1.70/dbdimp.h
DBD-Oracle-1.70/hints/
DBD-Oracle-1.70/hints/macos_syms.pl
DBD-Oracle-1.70/hints/macos_bundle.syms
DBD-Oracle-1.70/hints/macos_lib.syms
DBD-Oracle-1.70/hints/dgux.pl
DBD-Oracle-1.70/hints/svr4.pl
DBD-Oracle-1.70/dbdimp.c
DBD-Oracle - 1.70 / README
CPAN: File::Temp loaded ok (v0.22)
CPAN.pm: Going to build P/PY/PYTHIAN/DBD-Oracle-1.70.tar.gz
With the help of 1.609 DBI (for perl 5.010001 on x86_64-linux-thread-multi) installed in/usr/lib64/perl5/auto/DBI.
DBD::Oracle configuration for perl on linux (x86_64-linux-thread-multi) 5.010001
Don't forget actually * READ * the Readme! Especially if you have problems.
Try to find an ORACLE_HOME
Your LD_LIBRARY_PATH env var is on "
The ORACLE_HOME environment variable is not set, and I couldn't guess.
It must be set to contain the path to an installation of Oracle Directory
on this machine (or a machine with a compatible architecture).
See the README file appropriate for your operating system for more information.
ABANDONED!
ATTENTION: No success on command [/ usr/bin/perl Makefile.PL INSTALLDIRS = site]
PYTHIAN/DBD-Oracle-1.70.tar.gz
usr Makefile.PL INSTALLDIRS = site - NOT OK
Test running
Make had some problems, won't test
Running make install
Make had some problems, used to install
[root@localhost ~] #.
What's the wrong please let me know
That's the problem.
Export ORACLE_HOME =
Also to make it permanent, you must enter the variable above bashrc and bash_profile for the user.
Onkar
Maybe you are looking for
-
Cookie of Safari of pop - up + questionable Adware - help!
I just got this weird popup in Safari (a background tab has been opened) and when I went to that, that's what part of it looked like (screenshot): I thought that it is a scam and immediately closed the tab. TBQH, it I freaked out a little because I s
-
system up to date is not installed and I get the error code 646. What can I do to get the dates above to install correctly.
-
When I defragment my system it only only only 17%
WHEN I DEFRAGMENT MY SYSTEM IT ONLY 17% THEN STOPS HOW CAN I SOLVE THIS PROBLEM. THE OPERATING SYSTEM IS WINDOWS XP 2000
-
Reproduces the problem of partitioning
Hi guys,.I work with partitioning replicated and I have a very strange problem.When I run the maxl script, below, I eventually find an orphaned partition/ * Connect to the essbase server * /.Login username password on < essbaseserver >;/ * Create or
-
Hi, I bought the CC of Photoshop and Lightroom pack today, but when I press 'go button' to start the adobe site goes gray... and I can't go any further... What can I do?