Oracle JRockit 3.1.2 and weblogic real time?

Similar Questions

• Make a graph that is customized by using the motion of the instrument and in real time

  I am very new to LabVIEW and I need to make a graph or a table with the data being the movement of a device and the x data in real time.  I know how to get the position of the instrument information and how to put in real time for the x axis, but I have no idea how to wire those things in a graph, what type of graph to use, or what other screws I need for the y - data.  I have attached the page I'm working on that... It's kind of just a meli melo of things I thought that may be useful, but I obviously need help.  Thanks in advance.

  Have you so far in your VI, it seems you will ask some data on the location of your device on each iteration of the loop.  In this case, you can use a waveform diagram in the while loop to display these points.  Each new point will be added to the table as they come.  You can do this by writing values to the table as you reach them inside the while loop.  This link should also be able to clear up some confusion about the differences between the tables and charts in LabVIEW.

• Merge Oracle Forms 11 g 2 and WEBLOGIC 10.3.6.

  Hi all

  I recently implemented weblogic 10.3.6 and installed Oracle 11 GR 2 forms.  I have everything works except one piece.  TNSNAMES. ORA.  When I run the logon_screen.fmx, he is back with an ORA 12560 error.  I placed the TNSNAMES file. ORA in the following directory:

  TNS_ADMIN = C:\Oracle\Middleware\asinst_1\config.

  I read that there is a second TNSNAMES. ORA somewhere, but have not found it yet?  any suggestions?

  When I get the error above through IE, I then click OK and provide connection information and everything works.

  Thank you

  Steven

  
  

  I'm sorry, but your answers are not clear...

  on the server: C:\Oracle\Middleware\asinst_1\config\tnsanames.ora.

  In other words, this is how you have set TNS_ADMIN?

  I've updated the default.env so that it points to this

  Yes, I did not understand that, but how did you do?

• Simultaneous playback and record real-time show levels of vibrations and his Deputy

  First of all I would like to stress that I am very new to Labview (using Labview 2011) and Assistant Sound and Vibration (Labview Signal Express 2011).  I'm starting a project to measure the speech (sound pressure using microphone) and the body of vibration (using the accelerometer) related to the acquisition of data NI 9234.   I looked in the tutorial and the examples provided with Sound and Vibration Assistant (SVA).   These examples allowed me to make a first recording that is connected.  I could view the playback display after I transfer the log to the data view.   Frankly I'm more sure of my measurement data if I could observe the timewave with speech variation.  I wonder if this is possible.  If it's possible, thanks in advance for pointing the direction.

  Thank you.

  Abu Dzarr

  You can look at the data, because it accumulates in one of two ways:

  1. Create a viewer and drag out of the acquisition apparatus in the Viewer.  It will give you a live view of the data.
  
  
  2. Create a viewer and drag the newspaper in the Viewer.  By default, this should show you that the current buffer being written to the file.  You can change that to click with the right button on the graph to view in the viewer and selecting show the whole graph, a static part of the graph, etc.

• Algorithm of PID in 'PID and Fuzzy Logic Toolkit' and 'real time Module ".

  Hi all

  I am recently using LabVIEW 2011 and 2011 real time Module. My application requires the PID control.

  Now, I have a problem. In the manual for "And Fuzzy Logic Toolkit PID", Chapter 2 "algorithm PID" it indicates non-interactive algorithm (also called the ideal algorithm, Standard or ISA) be used in all the screws of PID in the Toolbox. It seems that Yes from source code. However, in Chapter 3, "Using the PID software" arrays of calculation of PID parameters based on method of Ziegler-Nichols, which was developed for the interactive algorithm (also called the series, the real classic algorithm). D action has been included in the scheme of control, the settings may be different for the two algorithms. In fact, Cohen Coons and adjustment PID Lambda rules can be used for the algorithm used by the box tool with no conversion.

  In addition, there is a PID function block comes with the real time Module, and I know not what PID algorithm it uses. Can someone help me?

  Thank you in advance.

  Su

  In the "and Fuzzy Logic PID Toolkit, we use the University structure to implement all algorithms. Tuning techniques we show on the manual to express the original work and we try to keep the same as you would look at the literature. However, in our implementation of autotuning internally converted to the structure used by our algorithms to keep compatibility with our own implementation.

  If you use an external source, you can use the Conversion.vi of Structure PID to change University, parallel or series of parameters in one used by our algorithm.

  The PID included with the real time module is a 'copy' of our algorithm, and they have the same settings and behavior. The only advantage to use this function block, you have access to the parameters through variables.

  Hope this helps...

• Real-time target - change IP and shared network varables

  Hello

  I create an application for the system in time real (Compact RIO).

  All data between the (current running on a windows PC-based) GUI and the real time system - is transferred via shared network variables.

  Shared variables are hosted on the target.

  I attributed the static IP address to the real-time target.

  Now for the question:

  After the deployment of the application in real time on the Rio target compact

  If I change the IP address of the target: how the shared variables 'know' to connect to the target?

  There is no place in the GUI (running on windows PC based) I set the IP address of the target.

  So I change the IP Address of the target (and for the sake of argument if I change the IP address of the PC, but they are always on the same subnet) - how to 'know' how to connect?

  Looks like a basic question I am absolutely certain I'm missing something to understand shared variable...

  Thnaks

  Hello Hazkel,

  The IP address of your shared time variable real target is located in the *.aliases file when you create an executable file, you will need to change there.  See the example below:

  

• Real-time synchronization works in versions of oracle 8i?

  Thanks in advance...

  Hello again;

  Apply in real time is a new feature introduced in the Oracle 10 g database.

  Without real-time log apply services for the complete log waiting archived recovery happen before applying to the database pending.

  If a redo log waiting is used in real-time applies can be activated by charging Data Guard to retrieve the data to make the journal roll forward pending courses as it is currently filled by the RFS process.

  Best regards

  mseberg

• How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?

  How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?
   
  It's only 8.3% of disk space!

  http://digital.NI.com/public.nsf/allkb/E7E2F5657B6026358625750B007201A6?OpenDocument

  The national Instrument is reformat that you drive less than 126 GB or replace the drive with a less than this size.

  Please OR tell me you go fix your LabVIEW Real Time soon, and that we will not have to wait for LabVIEW RT 9.2.1 in 2011 for this one to fix.

  http://upload.wikimedia.org/Wikipedia/Commons/9/90/Hard_drive_capacity_over_time.svg

  Readers as high as 126 GB or more have been around since mid-2002.  It's about 7 years now and LabVIEW Real-time STILL cannot use greater than 126 GB drives!  Please OR.  Do something.

  We deserve the patches for older versions of LabVIEW RT.  What about updates to LabVIEW RT.  As 7.0.2 7.1.2 7.6.2, 8.0.2, 8.2.2, 8.6.2.

  We don't need new features or versions of LabVIEW RT as 9.0 until we have some of the bugs fixed in existing versions.

  Kevin.

  
  

• Is there a way to know what physical events are happening in real time?

  I just had a problem from my phone since last week. I wouldn't do something unusual. Knows running programs with regard to my knowledge and visible only windows are concerned. And my hard drive would be thrown open. I don't know which program is the cause. So I asked for help in the windows event viewer and look under hardware events because that's what I thought would contain the event in question. but it was empty.

  I'm here to ask you all, if anyone can help in this regard.

  Amit

  Hello

  Check these:

  Scenarios selected for monitoring performance with Windows Vista
  http://TechNet.Microsoft.com/en-us/library/cc748962 (WS.10) .aspx

  This free utility makes it easy to check the event logs - since you can check everything
  entry in the final minutes or other periods of time. Any or all of the event logs can be saved
  then deleted to make it easier also for future entries to read.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  z http://www.Nirsoft.net/utils/my_event_viewer.html

  =======================================================
  
  Sysinternals has utilties that can help such as Process Explorer, Process Monitor and others. Those
  and others are below.

  This is a pretty complete performance convenience store and a lot of these methods will contribute to
  your effort.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Difference between prefer application-packages in weblogic.xml and weblogic application. XML?

  Hello!

  When you deploy a WAR for WebLogic 10.3.5, what is the difference between the prefer-application-package element in the weblogic.xml and weblogic application files. XML?

  In my WARs WEB-INF/lib / I have a JAR that contains classes that are already provided by the container (but older versions).

  If I do not prefer-application-packages use my application gets then the classes provided by the container.

  If I use prefer-application-packages in weblogic.xml can I get classes in WAR/WEB-INF/lib, which is expected.

  But if I use prefer application-packages in weblogic - application.xml, then I get the versions of container. Why?

  Is there a difference between these two options?

  The exact data that I use are:

  (foo.bar. * is the name of the conflicting package;) Add or remove the linex tagged XXXX)

  WEB-INF/weblogic.xml:

  <?xml version="1.0" encoding="UTF-8"?>
  <wls:weblogic-web-app
      xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-web-app"
      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
      xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.2/weblogic-web-app.xsd">
      <wls:container-descriptor>
          <wls:show-archived-real-path-enabled>true</wls:show-archived-real-path-enabled>
          <wls:prefer-application-packages> <!-- XXXX -->
              <wls:package-name>foo.bar.*</wls:package-name> <!-- XXXX -->
          </wls:prefer-application-packages> <!-- XXXX -->
          <wls:prefer-application-resources>
              <wls:resource-name>META-INF/services/some....</wls:resource-name>
              <wls:resource-name>META-INF/services/unrelated...</wls:resource-name>
              <wls:resource-name>META-INF/services/stuff...</wls:resource-name>
          </wls:prefer-application-resources>
      </wls:container-descriptor>
      <wls:jsp-descriptor>
          <wls:page-check-seconds>-1</wls:page-check-seconds>
          <wls:precompile>true</wls:precompile>
          <wls:precompile-continue>true</wls:precompile-continue>
          <wls:keepgenerated>true</wls:keepgenerated>
      </wls:jsp-descriptor>
      <wls:session-descriptor>
          <wls:persistent-store-type>replicated_if_clustered</wls:persistent-store-type>
      </wls:session-descriptor>
  </wls:weblogic-web-app>
  

  META-INF/weblogic - application.xml:

  <?xml version="1.0" encoding="UTF-8"?>
  <weblogic-application
      xmlns="http://xmlns.oracle.com/weblogic/weblogic-application"
      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
      xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/javaee_5.xsd http://xmlns.oracle.com/weblogic/weblogic-application http://xmlns.oracle.com/weblogic/weblogic-application/1.2/weblogic-application.xsd">
      <application-param>
          <param-name>webapp.encoding.default</param-name>
          <param-value>UTF-8</param-value>
      </application-param>
  
      <xml>
          <parser-factory>
              <saxparser-factory>
                  org.apache.xerces.jaxp.SAXParserFactoryImpl
              </saxparser-factory>
              <document-builder-factory>
                  org.apache.xerces.jaxp.DocumentBuilderFactoryImpl
              </document-builder-factory>
              <transformer-factory>
                  org.apache.xalan.processor.TransformerFactoryImpl
              </transformer-factory>
          </parser-factory>
      </xml>
  
      <prefer-application-packages>
          <package-name>foo.bar.*</package-name> <!-- XXXX -->
          <package-name>javax.jws.*</package-name>
          <package-name>javax.xml.ws.*</package-name>
          <package-name>org.apache.cxf.*</package-name>
          <package-name>antlr.*</package-name>
          <package-name>org.xmlsoap.schemas.wsdl.*</package-name>
      </prefer-application-packages>
  </weblogic-application>
  

  WebLogic - application.xml has no meaning in wars, it is only used in the ears.

• Oracle JRockit R28.2.2. OutOfMemoryError: classblock award

  Hi people,
  
  Well, we have a production Weblogic on Oracle JRockit Virtual Machine environment. The problem is that we are trying to avoid an 'exception' OutOfMemoryError is thrown every day by a SOA managed server, which causes a failure and stop the managed server that must then be restarted, causing interruptions of service applications.
  
  Platform:
  64 bit of Windows Server 2008 R2 Standard. 32 GB OF RAM
  
  Products:
  Oracle JRockit R28.2.2
  Oracle Weblogic Server 10.3.2
  Oracle SOA and BPM Suite 11 g R1 11.1.1.5 offers Pack
  Oracle 11g 11.1.1.5 bus services
  
  
  The error message is the following:
  
  means: classblock award, 110787528 load, 84224K footprint, in check_alloc (src/jvm/model/classload/classalloc.c:215).
  
  Attempt to allocate 7G bytes
  
  It is not enough native memory for the Java
  Execution environment to continue.
  
  Possible reasons:
  The system is out of physical space RAM or swap
  In 32-bit mode, the process size limit has been hit
  
  Possible solutions:
  Reduce the memory load on the system
  Increase the physical space of memory or swap
  Check if the swap backing store is full
  Use Java 64-bit on a 64 bit OS
  Decrease the Java heap size (-Xmx /-Xms)
  Reduce the number of Java threads
  Decrease for the Java thread stack size (-Xss)
  Disable the compressed references (-XXcompressedRefs = false)
  
  
  Here are the conclusions that I made on this problem:
  
  -It is clearly indicated in the error message that is not a matter of size of the Java heap since this kind of errors usually look like: (Java Heap Space, getNewTLA, etc...) and the message makes clear: "memory is insufficient native to Java runtime environment continue. In addition, the MissionControl records show that the heap is constantly collected garbage and there is no memory leaks.
  -The size of the process is about 10 GB (7 GB Heap Size and 4 GB) memory native platform consists of a 64-bit Windows Server 2008 with 32GB, so it is neither a "process size limit question."
  -According to this, it would be clear that the problem is that "the system is out of space RAM or physical swap", but this is not true either, because the system has a paging file max 48 GB (this is actually useful) and above all, the system has 16 GB of RAM used by all processes leaving the 16 GB of free memory for use.
  I came to think that either JRockit is default and throw the exception without good reason, or the message displayed is wrong and is not let me find the right the cause of the issue we face.
  
  Any kind of advice is appreciated.

  Hi Alain,

  As Mike mentioned earlier, try to increase

  -XX: MaxClassBlockMemory 75 m.

  Use the following option.

  -XX: + UnlockDiagnosticVMOptions - XX: MaxClassBlockMemory = 75M

  Kind regards
  Kal

• ORACLE 11G 'real-time applies' does not work?

  We have an original database on ORACLE 10.2.0.4 and update us for 11.1.0.7.
  After that, we create backup of database and tried to use the "real time applies.
  
  Principal database can transfer standby database log files and ensures database can also apply to newspapers. The problem is that we can NOT work on 'apply in real time '.
  
  Ideal ant that bad?
  
  = procedures = (standby database)
  
  SQL > bootable media.
  ORACLE instance started.
  
  Total System Global Area 2087780352 bytes
  Bytes of size 2161272 fixed
  1795163528 variable size bytes
  251658240 of database buffers bytes
  Redo buffers 38797312 bytes
  Mounted database.
  
  SQL > alter database open read-only.
  
  Database altered.
  
  SQL > alter recover managed standby database disconnect log file using current;
  
  Database altered.
  
  SQL > select PROTECTION_MODE, PROTECTION_LEVEL, DATABASE_ROLE, SWITCHOVER_STATUS, OPEN_MODE, GUARD_STATUS from v$ database;
  
  PROTECTION_MODE PROTECTION_LEVEL DATABASE_ROLE SWITCHOVER_STATUS
  -------------------- -------------------- ---------------- --------------------
  OPEN_MODE GUARD_S
  ---------- -------
  MAXIMUM PERFORMANCE STANDBY UNAUTHORIZED PHYSICAL PERFORMANCE
  NO CLIMB
  
  SQL > select process, status from v$ managed_standby;
  
  STATE OF THE PROCESS
  --------- ------------
  CONNECTED ARCH
  CONNECTED ARCH
  CONNECTED ARCH
  CONNECTED ARCH
  INACTIVE RFS
  MRP0 APPLYING_LOG
  
  6 selected lines.
  
  
  = Configuration of primary database init.ora file =.
  
  # for DG Employment
  db_unique_name = DBPMY
  log_archive_config = 'dg_config = (DBPMY, DBSBY)'
  Log_archive_dest_1 = ' LOCATION = / Archive/DBPMY/arc/Vault MANDATORY.
  LOG_ARCHIVE_DEST_2 = "service = DBSBY valid_for =(online_logfiles,primary_role) db_unique_name = DBSBY LGWR ASYNC = 20480 REOPEN option = 15 NET_TIMEOUT = 30'
  *.log_archive_format='DBPMY_%r_%t_%s.arc'
  log_archive_dest_state_1 = enable
  LOG_ARCHIVE_DEST_STATE_2 = enable

  Is your compatible parameter to at least 11.1?

  Best regards
  Robert
  http://robertvsoracle.blogspot.com

• Where to download 10gR 3 Tuxedo and Weblogic 10.3.1 for Win2K3 64-bit?

  People,
  
  Hello. I install PeopleTools 8.50 in 64-bit Windows Server 2003.
  
  PeopleTools 8.50 requires 10gR 3 Tuxedo Weblogic 10.3.1 and is certified 64-bit operating system.
  
  In the package http://edelivery.oracle.com PeopleTools 8.50, there are only 3 files to Windows as follows:
  
  (1) 10gR 3 tuxedo for MS Windows Server 2003 32-bit (V15053-01)
  (2) Weblogic 10.3.1 for MS Windows 32-bit (V16992-01)
  (3) Weblogic 10.3.1 generic (V17003-01)
  
  I know, 10gR 3 Tuxedo and Weblogic 10.3.1 are supported on 64-bit Windows Server 2003. But I can't find a website to download 10gR 3 Tuxedo and Weblogic 10.3.1 for my 64-bit Windows Server 2003.
  
  Can any people provide a link to download 10gR 3 Tuxedo and Weblogic 10.3.1 for 64-bit Windows Server 2003?

  user8860348 wrote:
  ... > 1) smoking 10 gR 3 for MS Windows Server 2003 32-bit (V15053-01)
  (2) Weblogic 10.3.1 for MS Windows 32-bit (V16992-01)
  (3) Weblogic 10.3.1 generic (V17003-01)

  I know, 10gR 3 Tuxedo and Weblogic 10.3.1 are supported on 64-bit Windows Server 2003. But I can't find a website to download 10gR 3 Tuxedo and Weblogic 10.3.1 for my 64-bit Windows Server 2003.

  Can any people provide a link to download 10gR 3 Tuxedo and Weblogic 10.3.1 for 64-bit Windows Server 2003?

  Why are you looking for the 64-bit 32-bit are available only on delivery for Windows, even if only the 64 bit OS is supported? Take the software of Peopletools 8.50 package for your platform, they are certified with this one.

  Nicolas.

• Oracle database can interact with sysbase database in real time?

  There are two database, it is oracle, one is sysbase, sysbase is the database of products. My program only can consult the oracle database and cannot visit sysbase database directly. My question is whether there is a direct connection to oracle, sysbase herbal database, when I visit oracle, oracle database can interact with sysbase database through this link in real time? How to make above function? Please give plan for her.
  
  Thanks in advance!
  Best regards
  Edward

  Yes it is. You must create a heterogeneous connection between these two databases
  Take a look at the links below:

  http://www.DBA-Oracle.com/t_heterogeneous_database_connections_sql_server.htm
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:13401716754850
  http://download-West.Oracle.com/docs/CD/B10501_01/server.920/a96571/repmultdemo.htm

• My daughter has an air of ipad and iphone 6 mounted on a tripod. She would like to use his phone to photograph/video while you watch on his ipad (in real time)... is it possible? If so, what adapter or cable is needed?

  My daughter has an air of ipad and iphone 6 mounted on a tripod. She would like to use his phone to photograph/video while you watch on his ipad (in real time)... is it possible? If so, what adapters or cables are needed?

  Hello!

  Unfortunately, this feature is only available with the GoPro cameras.

  And Yes, if all cables already existing for these purposes, it would be kind of a pain to take pictures and do not shake the camera accidentally. Maybe, VSCO camera makers will make such feature in some time in the future. This idea is excellent and innovative. Maybe even Apple will listen to users and make their new iOS 10.