Orchestrator web client: using variables in one presentation to another page

Similar Questions

• Unable to connect to vSphere Web Client using Firefox or Chrome on the server 2012R2

  I recently installed the web client of vsphere 5.1.0 on my 2K12R2 box.  I get questions that are well known and documented when I try to connect using IE11 (but note that I can always connect to the server vCenter). So I decided to try firefox and chrome.

  With Firefox, I just get a cannot connect error message - Firefox can't establish a connection with the serere to localhost:9443.  When I try Chrome I get "this webpage is not available" with IE it came with the problem with the security certificate, but if I continue I can enter.  Other browsers are set to use the system proxy settings, so I don't ' know what is happening.

  Help!

  Thank you

  Have you tried to set the proxy to 'No Proxy' settings?

  What the system proxy settings are currently configured (netsh winhttp, see the proxy)?

  André

• copy some variables of one RPD to another

  
  Hi all

  How to copy a few variables of one RPD on the other, I'm spending DEV for the TEST and I can't move the RPD all as our architecture does not support. How can I copy only a few variables one SPR to another.

  Thanks for your time and your help.

  Compare to rpds and make a correction. then deploy the fix RPD in the RPD to test via the Merge option.

  The RPD to test will be original. dev RPD will be change.

• Apex 4.2 passage value between one point and another page

  I have a page where I accept a start date and date as the end parameter
  its source, which I put it as a preference or point of application
  
  Now, in the other page, I have referred to jasper...
  so it's the first page... I'm not able to access the start_date tends in another page
  start_date and end_date
  
  Start_date shows like null
  Am confused on what element of preference and application
  Where will we use preference as a source type.
  
  Example again
  page 103
  p103_start_issue - preferenec
  p103_end_issue - preference
  A button named other page
  The other page
  When I call report jasper I pass the value of the parameter as: p103_start_issue and: p103_end_issue
  But the real value is zero for fields...
  How can I acess the real value...
  Do I have to use the point of application. ? I tried the point of application as the source type, but always the same question.
  
  Thank you

  Am confused on what element of preference and application
  Where will we use preference as a source type.

  A Page element is the shortest way duration to store session state variables. Page items are usually (but not always) deleted when entering or exiting a page. They are usually used to store a value that changes most of the time that you enter a page. Page items are also usually mainly by the code on this page. This does not mean that the other pages cannot or will not use, but access from other pages must be controlled so that they are not reference an element of page of a different pages after the page cache has been cleared.

  Application parts are data that are changed or are intended to be viewed by several pages. Application parts are not deleted unless an end of session or a specific call to make them disappear.

  Preferences are data that are intended to be stored and retrieved to specific users for several sessions. Diary of an app and back in and the data is always available.

  That said, from your description of the problem, I suppose that the cache page 103 has been erased and erasing the page element values. I think you should use a part of the application of what you have posted.

• Call a variable in one function of another

  Okay so here is the situation:

  I have a function that has a loop For inside.  Inside this loop for I am defining a button and calling another function, if you click on.  The question is (since I should not put functions within other functions) how can I get the variable being processed in the loop For to consider in the service that was already activated by pressing the button.

  lol sorry.  Here's the code.

  All variables are defined elsewhere in the code.

  function populateBox(DataInput:XML)

  {

  linkAmount = DataInput.country [boxPartNum - 1].link.length (); sets the amount of deployed links

  for (k = 0; k < linkAmount; k ++)

  {

  myLink = new LinkClass();

  box.boxMC.linksMC.addChild (myLink);

  define functions for links.

  myLink.addEventListener (MouseEvent.CLICK, linkFunction);

  }

  }

  now the function when the button is pressed.

  function linkFunction(event:MouseEvent)

  {

  trace (k);

  }

  I need to find the 'K' used in the loop For.

  What are my options?

  IF they are the movieclips then you can assign the value of k as a property of them dynamically.  You can retrieve this value in your event handler through the event argument that is passed to the function.

  function populateBox(DataInput:XML)

  {

  linkAmount = DataInput.country [boxPartNum - 1].link.length (); sets the amount of deployed links

  for (k = 0; k

  {

  myLink = new LinkClass();

  box.boxMC.linksMC.addChild (myLink);

  define functions for links.

  myLink.addEventListener (MouseEvent.CLICK, linkFunction);

  myLink.kValue = k;

  }

  }

  now the function when the button is pressed.

  function linkFunction(event:MouseEvent)

  {

  trace (Event.currentTarget.kValue);

  }

  Note: I'm not surewhen, as it is needed, but it is possible that you will have to climb the event.currentTarget as a MovieClip, so the line service may need to be...

  trace (MovieClip (Event.currentTarget) .kValue);

• Not sure I have it is a bug or a feature. We use two players: one for record, another for playback.

  It is a continuation of a Thread by bmagown under "BlackBerry" 8300 Series Smartphone - BlackBerry Curve section of the forum which can be found on:

  Duplex full is not possible?

  The behavior you see here may vary according to the model of smartphone BlackBerry due to the fact that it is mainly based on the underlying hardware of the BlackBerry smartphone.  Recording and simultaneous playback is possible on some models, however that a codec can be used at the same time.  This means that you need to record and play using the same audio format.

• Simple task - syntax Question (how do you pass variables from one component to another component - databinding)?

  Hi all

  I'm moving some width/height/URL of a Video Player component to a Social Bookmarking component incorporate text entry field. (for people capture and share videos).

  I know that it's a simple task, but it's the end of the day and I seem to have a brain failure... What is the syntax to achieve this? Do I have to import the video player component? These widths/heights/URLs are all generated dynamically by a XML... should I be pulling the XML or reuse just variables already existing in the Video Player component?

  Here is my code...

  Video player:

  [Bindable]

  var public source: String = "";

  [Bindable]

  public var autoPlay:Boolean = false;

  [Bindable]

  public var fullScreenMode:Boolean = false;

  [Bindable]

  public var clipTag:String = '_movie;

  [Bindable]

  public var iag_code:String = "";

  [Bindable]

  public var officialURL:String = "http://www.movies.com/"; ""

  [Bindable]

  public var referer:String = 'unknown ';

  [Bindable]

  public var gID: String;

  [Bindable]

  public var starterImageURL:String = 'http://www.movies.com/jazzmaster/images/default_starter_image.

  [Bindable]

  public var oldWidth:Number;

  [Bindable]

  public var oldHeight:Number;

  Component sharing:

  < mx:HBox

  Height = "10%".

  horizontalCenter = "-25".

  Red = '0 '.

  paddingBottom = "5" >

  < mx:Text text = "" Embed Code: "paddingTop ="1"color ="#FFFFFF"fontSize ="12"/ >"

  < mx:TextInput text = "{oldWidth}" / >

  < / mx:HBox >

  The above code generates an error... "Any attempt of property inaccessible oldWidth via a reference with a static type com:SharingBookmarks."

  Thank you all!

  DK

  Try this...

  Create a flex project and add a folder called 'src '.

  create a new component MXML named "VideoComp.mxml" and copy/paste

  http://www.Adobe.com/2006/mxml"width ="400"height ="300">

  [Bindable]

  public var videoWidth:int = 300;

  [Bindable]

  public var videoHeight:int = 300;

  ]]>

  create a new component MXML named "SharingComp.mxml" add copy/paste this...

  http://www.Adobe.com/2006/mxml"width ="400"height ="300">

  [Bindable]

  public var videoWidth:int;

  [Bindable]

  public var videoHeight:int;

  ]]>

  and here's the main.mxml file

  http://www.Adobe.com/2006/mxml '.

  xmlns:src = "src.*" >

  private void doSomething (): void

  {

  sharingComp.videoHeight = videoComp.videoHeight;

  sharingComp.videoWidth = videoComp.videoWidth;

  }

  ]]>

  Hope this helps,

  BaBo,

• Cannot add the announcement using the CLI or Web Client, but why?

  I have a simple installation of vsphere with the installation of the web client on a windows 2008 R2 server. In the past, we had it connected to the AD, but he recently got grumpy on this subject and stopped the AD user authentication. At this point we have completely blown away the server and have installed Server 2008 R2 from scratch made all update MS, installed vSphere and then confirmed that it worked, adding the server to the domain.

  It didn't automatically connect to AD, but I wasn't expecting that. Statement I see say to go to the customer Web and look under "Sign-On and discover" for... and here I hit the first problem. I have nothing under that. Here is a screenshot if all goes well say clearly what I mean.

  

  So looking around, I realized the ssocli command and run ' C:\Program Files\VMWare\Infrastructure\SSOServer\utils\ssocli.cmd set claire - a discovery-is u Admin - verbose "which seems to show that AD can interact with vsphere to a certain level without any problems because the field is, controllers identified and everything seems peachy to present a single error at the end and it just doesn't work."

  ERROR: Failure of the discovery of source identity: no data for aae527a0e405000a15535a58e53e41fc.ims.default.ad.domain found

  So looking at this tool, I see all sorts of fun things that he can do and I actually ran ' C:\Program Files\VMWare\Infrastructure\SSOServer\utils\ssocli.cmd managing identity sources - a creation u Admin - r ldap://dc1.domain.com - ldap port 3268-d domain.com-l CLG - main-base-dn DC = domain, DC = com - group-base-dn DC = domain, DC = com, ldap://dc2.domain.com f-L [email protected] '. It seemed like she loved it. When I run the command list he shows in the list of sources of identity, but still it will makes me authenticate users of the AD and still it is not all the options under "Sign-On and discovery" on the Web Client. I also noticed that chain letters of the previous error are different than in the field successfully added.

  I can always authenticate on the local server with no problems. I have not found any errors or warnings on the domain controllers that seem to indicate what could be the problem. I checked the time on two domain controllers and vSphere server are all synchronized.

  What else can I do to track down the problem?

  It turns out have been a matter of permission training problem. I log in the Web Client using computer local administrator not the Admin@System-Domain. Fixed that and my good domain information seem to work. Why it didn't work when I did to the CLI, I don't know. I also at one point started running the SSO user AD service so that may have helped things.

  Anyway, works now.

• How can I use variable presentation logic SQL

  Hi Experts,

  How can I use variable SQL logical presentation. I need the exact syntax. Kindly help me to achieve this goal.

  "Time". "" Date "between the Date of 2014 '-1-17 'and Date' ' 2014-2-16

  Thanks in advance

  Asim

  It's done... We can use it in the logical query with the same syntax where we use in converting this filter as SQL...

• vSphere Web Client 6.0 Index 0 off limits

  Any time we try to connect to the web client of vSphere we are presented with the error: I can't find anything about this, any help would be greatly appreciated

  

  

  Hi Andreas -.

  I was able to find a solution to this problem.  I'm sorry that I had not had the time to post again.

  The problem for me was to cached objects that are stored in the folder SerenityDB.  One time the cached object have been removed, the problem disappeared.

  You must first login to your vCenter Server Appliance using SSH or the console

  1. judgment of vsphere client service
  2. rm - rf/storage/vsphere-client/SerenityDB/serenity / *.
  3. starting the service client vsphere

  You should then get a status message indicating the vSphere client Web PID is running under.  Wait as the web client initialization complete and then try to sing.

  I hope this helps!

  Sabin

• vSphere Web Client shows 0 vCenter server

  Hi all.  As a newbie, I am currently playing with vCenter 5.1.  I just vcenter Server 5.1 with all required components (SSO, Web Client Server, etc.) installed on a test server.  After installation, I am able to connect to SSO via vSphere Web Client using the admin@system-domain account.  I am able to create SSO users and assign permissions user SSO.  However, vCenter server list is empty, there is no vCenter server on this list, which should not be; See the attached screen shot.  This is why I'm not able to test other features of vCenter.  Is any one having the same number as I am?  It is a clean installation, running on a Windows 2008 R2 operating system.  Thank you.

  Salvation was,

  Go to your SSO Configuration and click your ad you have configured under the identity source.  To do like default domain by clicking on the symbol that looks like this

  

  Once that is done, try to connect with your AD administrator and see if the inventory is the filler.

  If it isn't yet, connect to vCenter using the vSphere client and click your object of vCenter, go to the permissions tab and add the authorization with your AD username and the role of the administrator. Now you should be able to connect with the AD user on the web client and the vCenter + inventory should appear.

  I would like to know if it works.

• VSphere Web Client that tries to sign on an incorrect IP address

  Hello

  I was wondering if someone could help me with a problem I'm having it please, I have a physical server running esxi with 4 virtual servers on it

  3 of them are used daily in our work, the fourth is only for vCenter on this server, we all vCentre installed applications (SSO, web client, vcenter etc.)

  When I try to log on to the web client I enter the credentials and it tries to authenticate with the following message

  Unable to connect to VMware lookup Service-

  https://10.1.10.14:7444/lookupservice/sdk

  which is OK because... we do not use the IP 10.1.10.14, this server address is 10.1.10.10

  as the web client uses the address https://localhost:9443 / vsphere client /

  I guess that the program would point to 10.1.10.10 instead

  So I have two questions arising out of this

  (1) can someone tell me how to get the web client to access the 10.1.10.10 instead of 10.1.10.14

  (2) If this is not possible, if I uninstalled all applications of vcenter and reinstall it can cause users unable to access other servers while I do this?

  Thanks for reading

  The system threw up several errors when try this, ultimately we uninstalled and reinstalled from scratch wmware and everything seems to be ok. Thank you for taking the time to answer my question

• VSphere Web Client impossible to deploy OVF,

  I want to use WebClient deploy the ovf of POS, but every time, it appears that: customer integration plugin must be installed to activate click on function of ovf the link below to download the insstaller.

  The I click on it and install it, of course I disable the IE protected mode and restart it.

  but next time when I open it, it will prompt me again and again.

  I have try it on firefox. It's the same question.

  My version of IE is: 11.0

  Help, please.

  What version is your vCenter Server? Anyway Internet Explorer 11 has some compatibility issues with the plugin for integration, see the release notes follow-up note:

  • Integration of client plug-ins can not work as expected if you log the vSphere Web Client using Internet Explorer 11 *.
    If you log the Web Client using Internet Explorer 11 vSphere, the following problems may occur when you perform tasks related to the Client plugin integration:
    Solution: use Mozilla Firefox, Google Chrome, or earlier versions of Internet Explorer to access the Web Client vSphere. You can also use vSphere Client instead of vSphere Web Client to work around this problem.
  • • Even if the Client integration plugin is installed, the following message appears when you try to import or to export a model from the FVO:
      Download the plugin Client integration
    • File browser does not download or download a file from the data store.
    • You can't get images of the CD/DVD drive.
    • The console of the virtual machine you may see a black screen with the following error message:
      Remote console is not properly installed

• Web Client 5.5 - How to download files from data store?

  I can't get the file download of data storage works on my 5.5 b vcenter webclient. When you browse the datastore folder / there are only buttons to install the Plugin for integration Client, refresh, new folder and delete. The plugin is installed and I tried to use IE11 and Chrome.

  It is a known issue and the workaround is to use an older version of the Mozilla Firefox browser.

  From the release notes: https://www.vmware.com/support/vsphere5/doc/vsphere-vcenter-server-55u1-release-notes.html#knownissues

  Integration of client plug-ins can not work as expected if you log the vSphere Web Client using Internet Explorer 11 *.

  If you log the Web Client using Internet Explorer 11 vSphere, the following problems may occur when you perform tasks related to the Client plugin integration:

  • Even if the Client integration plugin is installed, the following message appears when you try to import or to export a model from the FVO:
    Download the plugin Client integration
  • File browser does not download or download a file from the data store.
  • You can't get images of the CD/DVD drive.
  • The console of the virtual machine you may see a black screen with the following error message:
    Remote console is not properly installed

  Solution: use Mozilla Firefox, Google Chrome, or earlier versions of Internet Explorer to access the Web Client vSphere. You can also use vSphere Client instead of vSphere Web Client to work around this problem.

• vCenter Web Client does not

  I recently (about 4 hours ago) installed the vCenter device on my host and had running.  When I'm with thevCenter via the client, everything goes well and I can manage the server.  The problem is that I can't seem to be able to use the web client.  I have check and the web client runs but when I go to the page I'm greeted by the default Apache screen telling me that Apache is running, but something is not configured right.  I was wondering if anyone else saw cela and if so, how you fix it.

  

  Welcome to the community,

  Try https://192.168.192.22:9443 / vsphere client

  André