orclNetServiceAlias with OUD

Similar Questions

• Error when trying to use EUSM with OUD 11 g R2 PS3

  I'm trying to install had with oud 11.1.2.3 using a pluggable 12 c database.

  initial Setup works very well, including the registration of database with oud, but later I realized that express em12c had more them management, so I decided to use eusm cli, but so far I'm stuck with following error message.

  example command using eusm

  EUSM listDomains ldap_host = IAM.mydomain.com ldap_port = 1389 ldap_user_dn = "cn = Directory Manager' ldap_user_password eu1 = "

  == > Oud access log < ==

  [19/May / 2015:21:20:21-0300] CONNECT conn = 47 from = 192.168.56.102:26338 = 192.168.56.102:1389 = LDAP protocol

  [19/May / 2015:21:20:21-0300] Conn LINK REQ = op 47 = 0 msgID = 1 type = = dn = DIGEST-MD5 SASL mechanism "" version = 3 "

  [19/May / 2015:21:20:21-0300] Conn LINK RES = op 47 = 0 msgID = 1 result = 14 etime = 0

  [19/May / 2015:21:20:21-0300] Conn LINK REQ = op 47 = 1, msgID = type 2 = = dn = DIGEST-MD5 SASL mechanism "" version = 3 "

  [19/May / 2015:21:20:21-0300] "" "Op de RESEARCH REQ conn =-3 = 202 msgID = 203 base ="cn = OracleContext"scope = sub filter =" (uid = cn = Directory Manager) "uploading =" * +,

  [19/May / 2015:21:20:21-0300] SEARCH RES conn = - 3 op = 202 msgID = 203 result = 0 = 0 =-1432081221870 etime nentries

  [19/May / 2015:21:20:21-0300] "" "Op de RESEARCH REQ conn =-3 = 203 msgID = 204 base ="cn = OracleSchemaVersion"scope = sub filter =" (uid = cn = Directory Manager) "uploading =" * +,

  [19/May / 2015:21:20:21-0300] SEARCH RES conn = - 3 op = 203 msgID = 204 result = 0 = 0 =-1432081221871 etime nentries

  [19/May / 2015:21:20:21-0300] "" "Op de RESEARCH REQ conn =-3 = 204 msgID = 205 base ="cn = schema"scope = sub filter =" (uid = cn = Directory Manager) "uploading =" * +,

  [19/May / 2015:21:20:21-0300] SEARCH RES conn = - 3 op = 204 msgID = 205 result = 0 = 0 =-1432081221872 etime nentries

  [19/May / 2015:21:20:21-0300] "" "Op de RESEARCH REQ conn =-3 = 205 = 206 basis msgID ="cn = subschemasubentry"scope = sub filter =" (uid = cn = Directory Manager) "uploading =" * +,

  [19/May / 2015:21:20:21-0300] SEARCH RES conn = - 3 op = 205 msgID = 206 result = 0 = 0 =-1432081221873 etime nentries

  [19/May / 2015:21:20:21-0300] "" "Op de RESEARCH REQ conn =-3 = 206 msgID = 207 base ="dc = mydomain, dc = com"scope = sub filter =" (uid = cn = Directory Manager) "uploading =" * +,

  [19/May / 2015:21:20:21-0300] SEARCH RES conn = - 3 op = 206 msgID = 207 result = 0 = 0 =-1432081221874 etime nentries

  [19/May / 2015:21:20:21-0300] "" "Op de RESEARCH REQ conn =-1 = 207 msgID = 208 base ="cn = config"scope = sub filter =" (uid = cn = Directory Manager) "uploading =" * +,

  [19/May / 2015:21:20:21-0300] SEARCH RES conn = - 1 op = 207 msgID = 208 result = 0 = 0 =-1432081221875 etime nentries

  [19/May / 2015:21:20:21-0300] Conn LINK RES = op 47 = 1, msgID = result 2 = 49 authFailureID = authFailureReason 1245385 = "" the server was not able to find all the user input for the username provided by cn = Directory Manager ' etime = 8 "

  == > Journal of debugging oud < ==

  [19/May / 2015:21:20:21-0300] 21 thread caught error = {Worker Thread 16 (148)} threadDetail = {parentThread = (1) hand isDaemon = false ClientConnection = operation 192.168.56.102:1389 192.168.56.102:26338 LDAP client connection = BindOperation (connID = 47, opID = 1, Protocol = "LDAP 3, dn =, authType = SASL")} method = {evaluateFinalStage(SASLContext.java:1089)} caught={javax.security.sasl.SaslException: DIGEST-MD5: ne peut pas acquérir le mot de passe pour le cn = Directory Manager dans le Royaume) {: iam.mydomain.com}

  Stack trace:

  at com.sun.security.sasl.digest.DigestMD5Server.validateClientResponse(DigestMD5Server.java:599)

  at com.sun.security.sasl.digest.DigestMD5Server.evaluateResponse(DigestMD5Server.java:244)

  at org.opends.server.extensions.SASLContext.evaluateResponse(SASLContext.java:324)

  at org.opends.server.extensions.SASLContext.evaluateFinalStage(SASLContext.java:1059)

  at org.opends.server.extensions.DigestMD5SASLMechanismHandler.processSASLBind(DigestMD5SASLMechanismHandler.java:210)

  to org.opends.server.extensions.SASLBindOperation$ LocalSASLBindOperation.processSASLBind (SASLBindOperation.java:294)

  to org.opends.server.extensions.SASLBindOperation$ LocalSASLBindOperation.processLocalBind (SASLBindOperation.java:195)

  to org.opends.server.extensions.SASLBindOperation$ LocalSASLBindOperation.access$ 000 (SASLBindOperation.java:162)

  at org.opends.server.extensions.SASLBindOperation.execute(SASLBindOperation.java:138)

  at org.opends.server.core.BindOperationBasis.run(BindOperationBasis.java:1003)

  at org.opends.server.extensions.TraditionalWorkerThread.run(TraditionalWorkerThread.java:166)

  == > access < ==

  [19/May / 2015:21:20:21-0300] DISCONNECT conn = 47 reason = 'disconnect a customer. "

  This is a known bug. There is a patch for oud 11.1.2.2.x, but so far a patch were not delivered for oud 11.1.2.3.x

  in order to get the work of the Ma, I had to deploy the solution described in the

  Oracle Support Document 2001851.1 (Oracle 12 c Cloud control EM SASL connection to OUD 11 G Instance) is located at: https://support.oracle.com/epmos/faces/DocumentDisplay?id=2001851.1

• Sun DS 5.2 is compatible with OUD 11 GR 2 PS1 replication Gateway?

  Hello

  It is possible to synchronize a master Sun DS 5.2 with OUD 11 GR 2 PS1 uses a replication OUD gateway?

  If not, is it possible to configure replication between Sun DS 5.2 and ODSEE 11 GR 2 and then synchronize GR 11, 2 with OUD ODSEE through the gateway of replication OUD?

  Thank you.

  Thanks Sylvain!

  Richard

• Force connections encrypted with OUD

  I have an OUD environment that supports the two LDAP/TLS on the LDAP connection manager, as well as LDAPS on the LDAPS connection manager.

  LDAP/TLS is the norm for our systems OEL that use LDAP as an identity store via sssd. LDAPS is used by Solaris systems.

  I want to prevent the use of communication in plaintext to the LDAP connection manager. I noticed that this is possible by forcing certificates (tls_reqcert) client-side and affecting the LDAP server to 'require' these certificates on the client side. Currently, in order to communicate securely with the LDAP server, client systems have the confidence of the root CA used to sign the server on each LDAP server certificates. This assures the client that the server is legitimate, but does not provide the server with any insurance on the client side.

  With 1, in thousands of LDAP client systems to support, I hesitated to employ a model that requires management of certificates on the client side. What is the only way to ensure that no plaintext communication is good on the port of the LDAP connection manager and TLS is required at all times?

  Fred

  Hi Fred,.

  What is the main engine to prevent the use of clear text communication?

  Is this related to approval or simply to prevent the exchange of password in plaintext over the network?

  Are you sure that none of your client application has no dependency on the communication of clear text? For example, many client applications access the LDAP (cn = schema) scheme and/or the rootDSE entry as anonymous using erase the text string. Forcing TLS can break these apps.

  I encourage you to take a look at the rules of bind, that you can specify in the access controls. You can restrict access to your data for SSL/TLS communications only, as described in understanding the Oracle Directory Access control model unified - 11 g Release 2 (11.1.2) section 9.4.8 and 9.4.9

  Network groups might help as well: you can classify incoming traffic according to the level of authentication/encryption. Then, you can decide to expose the contents of the directory for secure connections only. Network groups are described in the understanding Oracle unified directory Concepts and Architecture - 11 g Release 2 (11.1.2) and

  http://docs.Oracle.com/CD/E29407_01/admin.111200/e22648/server_config.htm#solCONFIGURING-network-groups-with-DSCONFIG

  Still another solution would be to develop a plugin OUD customized by using the public API to refuse any request made on the Insider w/o TLS LDAP port. Plugin API is described in Oracle & reg; Developer's Guide to Fusion Middleware for unified Oracle 11g Release 2 (11.1.2) directory - Table of contents and Oracle Fusion Middleware Java QAnywhere for Oracle standardization of the directory

  Sylvain

  ------

  When closing a thread as answered don't forget to mark the messages correct and useful to make it easier for others to find their

• LDAP group search reconciliation with OUD connector is not get rights of OIM 11 g r2 ps3

  Hello

  I am trying reconcile the OUD in OIM 11 g r2ps3 groups. But there is no error and no result in the LDAP connector Planner group research reconciliation. I can able to fill organizations but no rights (groups knots). Please find below the screen for the same thing. Thanks in advance

  

  

  Thank you Dmitry Berezkin. I'm closing this thread as answered.

  I'm working on the unified Oracle 11.1.2.3.0 directory.

• replication with more of a naming context?

  Hello

  Well, I want to replace our very old OID with OUD installation (for database Oracle Net services) but I am facing a problem more.

  I have 2 naming context dc =, dc = domain, dc = org and dc = everyone.

  I created the domain controller = everyone with DOHAD (Configuration-> Create local naming context for database Oracle Net services).

  I am able to query entries in each context.

  So I decided to install another server for HA and using replication.

  I installed on the second server with the same option and the same procedure (stand alone and for the Oracle Net database services).

  I created the domain controller = everyone on the second server.

  Then, I used dsconfig to create the replica server on port 8989 on two server.

  I created the new domain of replication for my two contexts with dsconfig-> replication-> synchronization-> field of replication management provider menu-> create new domain of the replication.

  The option list to show me the two areas.

  But when I do a dsreplication-> enable replication, I don't have that cn = OracleContext or dc =, dc = domain, dc = org or cn = OracleContext, dc =, dc = domain, dc = org.

  No trace of dc = world or cn = OracleContext, dc = everyone.

  Is it possible to reproduce multiple naming contexts, and what is the procedure to do?

  Even with the DOHAD and Topology Manager, I see that the domain controller = ma, dc = domain, dc = everyone.

  Thank you

  Hello

  Well, I found why the replication was not working for a context.

  I don't have to create an area of replication with dsconfig before.

• The OID of the Migration of OUD, hitting the problem with the attribute pwdhistory OUD

  The OID of the Migration of OUD, hitting the problem with the attribute pwdhistory OUD

  I use sync DIP at the end of migration of data from OID for target OUD. Everything seems great so far, I have found that pwdhistory being migrated is not being validated by OUD password policy

  I do import ldif for OUD and find this pwdhistory field is populated with the same OID value. When I reset password in OUD-DOHAD with the word in the history of password,.

  Expected Behavior: Error Message from the OUD "" LDAP: error code 20 - already the value of specified password exists in the user input " "

  Course Behavior: OUD is what allows to reset the password in the password history

  Also found that when I try again with the same password, then it throws the error 20 code. OUD replaces the old values in pwdhistory after the password resets and written new values with stamp of password.

  It is a Blocker for us for migration in the history of password, I would like to join the forum and check if someone had the same problem and how they managed it?

  Thank you

  Satya

  Support of Oracle confirmed that DIO history for the OUD password migration is not supported. The OID and OUD records and validates the pwdhistory differently

• connection fails with an error via the Proxy OUD

  Have hit a problem with the Proxy of the OUD. If the recorder file or admin-based access is turned on, the link fails with an error

  Below error

  The result Code simple bind attempt failed: 80 (other) additional information: Worker Thread 44 has encountered an exception uncaught during the processing of operation BindOperation (connID = 97, opID = 0, Protocol = "LDAP 3, dn = cn = oudadmin, authType = Simple"): NullPointer

  Hello

  I think that the conditons of occurrence are more complex than just enabling newspapers, but this looks like a bug.

  Please contact the Oracle Support so that a default is created.

  -Sylvain

  Please mark this answer as correct or helpful, when it is appropriate to make it easier for others to find

• Oud SPEL of programma van star wars Compatibiliteit

  IK zou very like nog eens een oud spel bovenhalen van star wars maar er komt op dat ik deze niet installeren omdat het gaat niet kan puts mijn 64-bit with

  IK verstä yesterday hele weinig van due like liquids haha
  MVG

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  Kies uw taal vervolgkeuzelijst onderkant van aan ITU of pagina om your question you posten in Taal van uw keuze. Post on the forum without jij het is voor Frans. ALS I niet vinden baking taal, support van jullie voor boven additional international Geraardsbergen kan

  Als u regarded dat deze vertaling has geholpen why u right place you plaatsen aankruisen said bericht als een antwoord alone when I andere landgenoten zoeken ze het Hotel vinden. dank

  http://answers.Microsoft.com/nl-NL/site/setlocale?URL=http%3A%2f%2Fanswers.Microsoft.com%2Fnl-NL%2Fwindowslive%2Fforum%3Ftab%3Dunanswered

• ODSEE 11.1.1.5 to OUD 11.1.2.3 migration - need a good document for this

  Hi, we intend to migrate from our ODSEE existing 11.1.1.5 to the latest version of OUD (11.1.2.3). I am looking for a step by step guide this immense task. Is there some official ID Doc for this? I want also to understand all possible things, that I must take into account before you perform this migration.

  Thanks in advance for the help.

  Thank you

  Surya Jesse, CISSP

  Hello

  I recommend you start with the guide of transition available to Oracle® Fusion Middleware Transition Guide for Oracle 11 g Release 2 (11.1.2) - unified directory summary

  If needed I can help for additional specific migration issues.

  Sylvain

  Please mark this answer as correct or helpful, when it is appropriate to make it easier for others to find

• How to recover Access Policy based on OUD groups

  I have a table named userdata with 3 columns

  1 user name

  2 take

  3 OUDgroup(associated with user)

  I need to find the access policy attached with this OUD group and then retrieve the role associated with this access policy. Please help me

  Concerning

  SuperCoolDamnAwsome

  Hello

  By joining the POL, POG and UGP tables, we can get the name of role associated with the access policy.

  Here is the query to get the name of role associated with the access policy.

  Select p.pol_name, u.ugp_name, u.ugp_rolename in pol p, u of the PMU, pog where p.pol_key = pog.pol_key and you.ugp_key = pog.ugp_key;

  Hope this helps

  Thank you

• Configure SSL for OUD 4444 port Admin port-&gt; replace the self signed certificates used

  Hi Experts,

  When installing OUD choose Certification self-signed for ports 1636 and 4444.

  Later I change the certificates used by the port of 1636 to a new key file containing the CA certificates. (Track the steps of: https://docs.oracle.com/cd/E52734_01/oud/OUDAG/security_clients_severs.htm#OUDAG00050)

  But same procedure does not have to replace the self signed certificates used by ports 4444!  Everyone is configured SSL (with Cert CA) on the Administration port?

  I couldn't even start the servers, you see an error:

  """

  category = gravity CORE = NOTICE msgID = 458891 msg = the directory server sent a notification to alert generated by the class org.opends.server.core.DirectoryServer (org.opends.server.DirectoryServerShutdown alert type, alert ID 458893): the directory server started the shutdown process.  Stop was launched by an instance of the org.opends.server.core.DirectoryServer class and the reason for the closure was an error occurred trying to start the directory server: NullPointerException (File.java:277 AdministrationConnector.java:843 AdministrationConnector.java:675 AdministrationConnector.java:182 ConnectionHandlerConfigManager.java:356 DirectoryServer.java:2932 DirectoryServer.java:1584 DirectoryServer.java:10108)

  «[27/sep / 2015:06:22:53-0400] category = gravity = NOTICE msgID = 458955 msg = the directory server CORE is now stopped "«»

  Post edited by: 1976902

  Sorry, I cannot help here - here are a few possibilities.

  Change connector Administration certificate

  https://docs.Oracle.com/CD/E52668_01/E54669/HTML/ol7-genssc-auth.html

  The failure of the handshake could occur for various reasons:

  • Incompatible encryption suites in use by the client and the server. This would require the customer to use (or allow) a suite of encryption supported by the server.
  • Incompatible versions of SSL in use (the server can only accept TLS v1, while the client is capable of using SSL v3 only).
  • Incomplete trust for the certificate of the server path
  • The certificate is issued to another area.
  • incomplete certificate trust path between the certificate for the server, and a certification authority root.
  • In most cases, this is because the certificate is not present in the trust store

• Which directories LDAP PeopleSoft certified? GR 11 2 OUD is supported?

  Hello

  In the process of integration peoplesoft with IOM GR 11, 2 ps2, we try to change the Directory LDAP to OUD. But, when we change the authentication provider in peoplesoft, it does not all attributes in OUD.

  so, just wanted to check if OUD is compatible with the peoplesoft application?

  Our PeopleSoft version: PeopleTools - 8, 52, and SCM: 9.1

  Please notify

  Thank you

  You will probably get more useful answers if you asked the wire at PeopleSoft PeopleSoft General Discussion forum

• IOM Setup integrated with OAM in HA using separate domains

  Must configure OAM and IOM in HA and integrated.

  Target architecture:
  1 is high availability. We have eight servers 2 for each of: level Web, OAM, OAM and OUD.
  2 OAM must be integrated with the IOM.

  3. we use two domains an OAM and another separate domain for IOM.

  4 using the version IAM 11.1.2.3
  
  We follow the high availability and guides 11.1.2.3 integration.
  On two servers with its domain, we have installed an OAM and IOM on two other servers with her owner field.

  We used the references:

  http://docs.Oracle.com/CD/E52734_01/OIM/IDMIG/OIM.htm#IDMIG32008 (Integration_guide)

  • 2.1.2 access Manager and Oracle Identity Manager integration to a single node topology

  You MUST set up the components of Oracle Identity Management in distinct areas WebLogic Server (split domain topology), as discussed in Section 1.2.1 "Integration of basic topology", otherwise, try to repair or upgrade a product can be blocked by a dependency of a component shared with another version. When you install the Oracle Identity Management components in a single WebLogic Server domain, there is a risk that you install the component (custom libraries, jars, utilities and plug-ins) in the area is perhaps not compatible with other components, resulting in problems through your domain.

  
  

  Oracle Identity Manager integration roadmap and Manager to access the section 2.1.3 Says nothing on utilization patterns separate db created by UCR and nothing on the store security DB.

  
  

  • http://docs.Oracle.com/CD/E27559_01/install.1112/e27794/configtwo.htm#OAMQI76585 (earlier version of IAM)

  3.2.9.2 article before you set up the database of store security
  Note: Regardless of the number of domains in a logic Oracle Identity and Access Management 11 g Release 2 (11.1.2) deployment (a logical deployment is a collection of products Oracle Identity and Access Management running in one or more domains and use a single database to store product schemas), all areas share the same database to store security and use the same encryption key for domain.
  The store security database is created when the first domain is created, and each new domain created is then joined with the database already created security store.

  
  

  We have already installed and configured OAM in its own domain and now wants to configure the IOM in its own domain.

  For IOM configured in its own domain and use the same DB as OAM and configured the store DB to help security configureSecurityStore.py with the option to join - Mr. Successfully completed this but OAM had a NAP error message.

  
  

  My questions:

  1. install IOM, MUST create us the separate db schemas when you use the RCU for IOM of OAM?  If so, why? Since it is in contrast with the references I listed above.   AND the need to ensure that we can OAM integrated with IOM.

  2 If can be convinced that they must be separated from the patterns which for each of the OAM and IOM?  (I am aware IOM needs: MDS, OPSS, IOM, SOAINFRA, ORASDPM, BIPLATFORM.)  But necessarily list OAM)

  3 so we can share the same patterns or if need to use a separate diagram, how we create the database of store (AKA strategies store) security?  To help create or join mode?

  Keeping in mind that we must integrate OAM and IOM.

  Not sure if someone has managed to do this configuration.

  Thank you

  If you're feeling lucky, you can try to fix your updateBIPJMSSecurity.py and then continue, however, if you want to be sure that nothing else could get broken by following the demolition, start from the beginning.

• OUD in Solaris Intel Architecture

  DOHAD deployment on amd64 i386

  I am a user of Solaris Intel interested in getting users authenticate to OUD Local.

  I need help for the use of OUD to add users through cli (I'm new to the OUD)

  in "netmgr" I already see and able to authenticate Oracle cn = Directory Manager.

  Base DN: Happy Oracle

  Question: How can I add users to test to a fully functional OUD running in Solaris 11.2 and Oracle12c with iPlanet installed.

  Currently have no GUI DOHAD functioning due to problems of the UCR/Solaris Intel Incompativility. (Survey)

  
  

  Comments are welcome.

  
  

  Art.

  Hello

  OUD comes with LDAP LCIs to add/edit users:

  Assuming that OUD instance is created in ,

  go to OUD/bin

  Here is an example to create the user u1 with the ldapmodify command:

  . / ldapmodify - a d 'cn = directory manager' w Pei

  DN: uid = u1, or = people, dc = example, dc = com

  UID: u1

  objectClass: inetorgperson

  CN: u1

  SN: u1

  userPasswword: u1

  If you have many users to create, you can use the command ldapmodify in batch mode

  with the - f option. The-f option is foillowed by an LDIF file containing entries to create.

  More info on command ldapmodify to ldapmodify - Guide to using command-line Oracle Fusion Middleware for unified Oracle Directory

  Sylvain

  Please check the answers as useful or correct when it is appropriate to make it easier for others to find their