Order of assignment management IP blade

Similar Questions

• order cisco call manager 5.0

  When you place your order call manager 5.0, if you select the

  MCS7835I1-K9-CM50

  HW/SW unified CallMgr 5.0 7835-I1 device, 0 seats

  You have also to order

  LIC - CM5.0 - 7835-I1 =

  License CallMgr 5.0 7835-I1 device

  If you order LIC-CM-DL-1000 =

  CallManager Device License - 1,000 units

  You can also order the licenses of individual phone, for example

  SW-CCM-UL-7912

  Unit for single IP phone 7912 CallManager license

  Yes, you will need each other. MCS7835I1-K9-CM50 is material. LIC - CM5.0 - 7835-I1 = is a software. LIC-CM-DL-1000 = a license for 1,000 units. You can order these from 10 to 1 000 000 units. As indicated in the following link, different model phones consume a different number of licenses of the unit. Individual telephony licenses are also required and usually purchased with a phone.

  http://www.Cisco.com/en/us/products/SW/voicesw/ps556/products_administration_guide_chapter09186a0080531ebb.html

  I hope this helps. If so, please indicate the position.

  Brandon

• How can I assign / manage a user in company with a student on a single account user?

  I licensed student CC for my son and a license for my work.  I am able to assign to a user on the business section, but have not found a way to affect the student son version.  Currently, when I log on my user (my desktop and my laptop) and it attempts to open its student programs on his laptop at the school, we receive a notification forcing me to close the session. It was my understanding that each license would work on 2 devices, and I bought license 2-1 student and 1 companies. How can I assign license student of my son to his own user?

  Hello

  I checked the account details and you have subscribed to two plans under your Adobe ID only.

  As you mentioned that you purchased the plan student for your son, I advise you get it canceled your account and buy under your son's account.

  You can create an Adobe Id for your son and subscribe to the terms of this.

  Please see cancel your membership creative cloud for cancellation.

  Kind regards

  Sheena

• Order (OM) - API management

  Hi hussein/helios,
  
  EBS 11i
  RHEL 4.6
  
  Data interface from one module to another module uses API > a DBA Apps work?
  I did not this API thing since then. Can you help me where can I get the scripts and APIs for OM?
  
  Have you already implemented the module of OM with the APIs to interface
  
  I have a requirement for the API release Pick, which I think should call
  

  auto create first deliveries

  and also send Confirmation API for ship sales orders confirming

  and API Bill self to ship confirmed orders of Service

  Thank you very much
  
  MsK

  Hello

  Where can I get the full list and these job titles and functions/tasks/responsibilities defined?

  I do not think that you will find documented somewhere in the Oracle Web site - Google should be your friend!

  Thank you
  Hussein

• Manager of the assignment compared to custom entities

  Hello
  
  A new question arised :)
  
  Can I use Assignment Manager to define the rules of assignment on custom entities? Put another way, if I create an entirely new entity with all the necessary hierarchy (tables, business, business etc. object components), can I define it as an object of assignment (or create an object of the transfer for it) and create top assignment rules in Assignment Manager?
  
  How do I do that?
  
  So far in the literature saw nothing prevents me to do...
  
  Thank you and best regards,
  Yossi.

  Hi Yossi,

  Yes it is possible.
  Although I don't him did not myself, I know that it will work. You will find all the necessary measures in the shelf 'Assignment Manager Administration Guide"chapter 10.

  You can read it here:
  http://download.Oracle.com/docs/CD/B31104_02/books/AssignMgrAdm/AssignMgrAdm_AdvancedConfig.html

  Benjamin

  Edited by: Penky April 29, 2010 12:43 AM

  Edited by: Penky April 29, 2010 12:43 AM

• An administrator of the team does need a license assigned to itself to allocate licenses to other users?

  I am looking to buy 3 CC licenses for teams. I would be the main Admin and the team administrator. Because I would never use Adobe products, I would never need a license awarded to myself. In the article on 'Manage your creative cloud to the membership of the teams', I noticed the line team admins are not affected by default license. Assign a license to yourself for access to creative Cloud applications and services. Does this mean I have to assign a license to myself in order to assign the other 2 licenses to other people? If I do that, then I would have only 2 licenses to be awarded instead of 3. If that is correct, I would need to buy 4 licenses for I might be able to assign 3? Is this correct or am I misunderstanding this?

  Hello

  No, if you do not want to sign in using your Adobe ID (Email) in the CC products and turn them on, then, you don't have to license CC Team to your Adobe ID (email) and can assign licenses to user who wants to use/activate licenses with their Adobe ID (email) only

  Thank you

• How to configure a user to use getManager() for sound manager in HumanTask

  Hello
  
  I have a simple AC.
  We create users and groups in weblogic and assign the task Participants using these users.
  
  I want to build a simple human task, which must obtain authorization from the Director.
  I don't want to assign the user statically, but I want funciton "user.getManager ()" allows you to assign a participant to the task on the 2nd level.
  To do this, the user must be mapped to a handler. But how can we do this?
  
  In weblogic-> security domains, I see only users and groups, but nowhere I see a Manager where I can assign orders to a Manager or a user to a card Manager.
  Can someone help me in this.
  
  Concerning
  RaviKiran

  Hi Ravi
  1. nothing beats a Manager configured separately in the weblogic console. Sound like that. Even the Manager is also one user that another user. The link looks like this. Each user will have standard properties such as firstName, lastName, Department, dateOfBirth, phone number, email etc etc. They also have an attribute as a Manager and the value of the present is just reference to another user. I hope you got the point.

  2. If, in the console Weblogic, say you create 2 users: weblogic1, weblogic2, weblogic3. And you can assign properties of base for each other like firstName, lastName, etc.. For weblogic1, assign the handler as weblogic2. To weblogic2 assign Manager as weblogic3 etc.

  3. now behind the screens in the Workflow, SOA, when you run user.getManager () and if the user is weblogic2, the value will be automatically weblogic2. And it lights up. You don't have to do any programming for it. The workflow will use the LDAP API to get the value for each standard property if they are named using standards such as firstName = givenName lastName = sn, emailId = mail etc etc. Here's all of the standard object properties for users, AD groups. Moreover, most of them apply to groups also in addition to users.

  Now, the real trick is, when you create new users in weblogic, you can specify firstname, lastname, mail etc. But to specify the Manager, for now, use this workaround given post below. Before submit you samples or explore SOA/BPM, create some accounts testuser in weblogic ldap integrated by default using app demo community seed (servlet). You can open this EAR and then the WAR and extract the .xml file and edit to add any substance you want.

  The link below should give you an idea more:
  Re: Kingdom is not met for the BPM app (See my answer)
  Re: Seeds Demo defective community

  Thank you
  Ravi Jegga

• Software Power Manager Lenovo - MDT task sequence

  I work in an environment that made the deployment of the operating system via SCCM 2007 SP2 R2 with MDT 2010 Update 1 integration.  I have a MDT task sequence that deploys my WIM file of Windows 7 captured laptops Lenovo predominantly (98% Lenovo fleet too).  Part of this task sequence uses rules to specifically target drivers and applications to individual models.  I'm having a LOT of trouble getting Lenono Power Manager (V3.31) software to install as part of the task sequence.

  The summary of the story is this:

  • Lenovo Bluetooth software installs OK (msiexec /i Win32\BTW.msi/t 1033.mst number)
  • Lenovo Hotkey software installs OK (installation program. EXE/S)
  • I put newspapers of the installation of the power manager, and there are no errors or it 'seems' to install OK (installation program. EXE/S)
  • I can advertise the POST image software Power Manager and it installs and works OK
  • In the task sequence run in order of Power Manager, Bluetooth, shortcut keys.

  If all goes well, that provides the information of someone perhaps enlighten us.  It's a little frustrating, because the package actually allows to install.  I'm almost to the point where I want to try to create a collection with rules to fill with Lenovo laptops and install then required it.  It is not a critical application - just, it would be nice to have.

  OK - I found the perfect answer for this.  The syntax that was needed was the following - Setup. EXE/s /f2"C:\Support\Logs\PWRMGRV.log" - but here's the thing.  In your task sequence, do a "run command line" before this stage of the application with the command "cmd.exe /c mkdir C:\Support\Logs".  If you do not specify this, it tries to rewrite in a place where he has no rights - and as a result does not work.

• Priority of management style?

  I want to use VerticalFieldManager to be center aligned horizontally, use the full available width. Therefore, I tried the following code:

  middleMgr = new VerticalFieldManager(Manager.FIELD_HCENTER | Manager.USE_ALL_WIDTH);
  

  However, the above code does not user interface I wanted. The Manager will use the entire width, but the field is left-aligned. If I use the style specifier individually as like:

  middleMgr = new VerticalFieldManager(Manager.USE_ALL_WIDTH);
  

  the Manager will use full width, but left-aligned. If I use:

  middleMgr = new VerticalFieldManager( Manager.FIELD_HCENTER);
  

  the Manager will throw the Center fields lined up, but because I use a background color, I can see that the vertical Manager uses all the width of the screen.

  Q: is there any order that any Manager style should be used? The case above, it seems that if there is Manager.USE_ALL_WIDTH is present and MANAGER. FIELD_HCENTER is ignored). Am I missing something?

  FIELD_HCENTER makes no sense with USE_ALL_WIDTH - the field (in this case your manager is this area) will use the entire available width (duh!) and so will be justified in left, right and Center.

  You can use FIELD_HCENTER in the fields added to your USE_ALL_WIDTH VOR.  This is where it makes sense.

• Abandonment of collaboration of first orders

  Hello

  How to cancel an order for a "fatal error" in first Cisco collaboration. I'm looking for an equivalent to:

  AbortOrders [errors |] RecoverableErrors | UnrecoverableErrors | [ [-forced]]

  Thank you!

  Hi George,.

  Go to my activities (or things) and find that particular order in the list.  Click on it and it will either allow you to cancel the order or assign it to yourself and then cancel the order.

  Thank you

• Order status update differently based on departure info?

  I have a client who sells products it provides locally on a fixed schedule or immediately provided by USPS.  I have install shipping options that work well, but I need a way to introduce different workflows depending on the selected shipping option. For USPS shipments, she needs a flow of work sent e-mail him.  For local deliveries, because she gets a lot more of this kind of order, and it provides only monthly, she won't email.  I have set up two order statuses: "Pending shipment" and "waiting for delivery", but I need know if there is a way to assign the status of the correct order when ordering and initiate a different workflow.

  It also needs a way to pull up and act on all forms of local delivery on a monthly basis.  Because it can filter the orders by order status, assigned to, or payment, I need to put one of these values automatically when ordering.  I want to get the status of the order to work, but if either assigned to or payment status would be easier to automatically update when your order and initiate a different workflow, I could do the same.

  I am new to BC, so if you have a different approach to solve this problem, I'm open to that as well.  Thank you!

  Its something I've wanted for awhile, but for now you can not change this on the front-end server.

• Manage a list of empty Sites with DW CC 2015 on OS El Capitan

  I have over 100 sites in my site definitions. I was working on a site and edited the remote directory in site server settings. It froze when I recorded it (as it does a lot recently) so I closed DW and reopened. Now my sites are all gone from the list "manage sites". I tried to restart my computer, deleting preferences and uninstall/install a new copy. Any ideas? I see the sites in the Site Cache file when I browse them, but cannot find any type of .ste file to re-import them. Help, please

  DW only creates .ste files when you run the Export command.

  If you still have an older version of the program on your machine with available site definitions, export from here and import it into the new version.

  Orders are Site > Manage Sites > export from the old version to create the files .ste and then Site > Manage Sites > Import in line with the new version.

  If the sites are all just disappeared (and missing in the drop in the files window in DW as well) and you have no access to them from any other version, you're pretty much stuck re - create the definitions. The real site files themselves should not have been affected by the accident of DW.

• Cannot assign a license to VMware ESXi 5.0 hosts

  Dear all,

  I installed vCenter Server 5.0 standard IBM x 3550 M4 and VMware ESXi 5.0 Standard for two M4 IBM 3650 x servers. I can attribute vCenter Server Standard 5 license to vCenter Server 5.0 but I can't affect VMware vSphere 5 Standard licenses for both ESXi 5.0 servers. Each server has 2x6Cores 2.3 GHz CPU (12 cores total). VMware vSphere 5 licenses that we purchase are VMware vSphere 5 Standard for 1 processor (VS5-STD-C) x 12, which is unlimited cores per processor. Can someone tell me what is the problem here and the reason why I still can't assign license to two 5.0 ESXi hosts.

  Rgds,

  Syairus

  If I understand correctly you have 12 licenses for 1 CPU each! In order to assign a license to a host of the CPU, the license capacity must be equal to or greater than the number of the host CPU. You can combine licenses in the portal My VMware.

  BTW. for two host with 2 CPU each, you need only 4 licenses of CPU (not 12), as processors/sockets are allowed, not carrots.

  André

• OIM 11 g R2 role assignment

  All,
  
  Everyone knows a scenario where OIM 11 g R2 does not assign a role to users when creating when applies the rule for this role to users?
  It seems that the event/process role assignment manager is only the trigger on a user create or maintain up-to-date, but does not trigger on the new creation of a role. If anyone else has experienced or has developed a workaround solution, let me know.
  
  Thank you
  D

  Looks like that it evaluates only membership in roles on a creation or update. Evaluate user task policies does not affect membership roles.

  To trigger this, I think I can create a scheduled task that merely updates an attribute on a user to trigger policy.

• Transform the Classic applications of performance management?

  Hi all
  
  We have just improved 9 Classic at EMP 11.1.2.
  
  We left the classic database, but now we know we have to convert in EMP in order to easily manage metadata.
  
  In help, for the "Transforming traditional application in performance" box, there is a sine qua non:
  
  •Before to transform a classic Performance Management architect planning application, remove all spaces in the names of the dimensions of the attribute. For example, rename an attribute called Extra Small for ExtraSmall.
  
  Here are my questions:
  
  (1) what exactly does means 'Dimension of the attribute? This is the label that is given to all member attributes? Or does that mean the name of the dimension? For example, we have a dimension called 'Entity', which contains members with labels like 'NonGuarantorBMD' or 'Inc. tax Exp '. I think that these members?
  
  (2) what happens if you do not change them? Afterwards you can their difficulty? The system entire crash and burn? It gives you a friendly warning?
  
  Concerning
  
  Dave

  The attribute dimensions are for Essbase/Planning, not HFM, so this does not apply to you.

  -Chris