Manage a list of empty Sites with DW CC 2015 on OS El Capitan

Similar Questions

• How can I get a list of Web sites with their Firefox passwords information

  There used to be a list of websites with their password. I can't find it now. I need information because I forgot some of the passwords that are filled

  Hello cellardweller221, you can access this list when you go to firefox > options > Security > passwords saved.

• All of a sudden when I opened a Web site with a webcam, webcam is empty.

  Out of the blue my sites with webcams, be they ustream or otherwise, will not leak the cam. It is empty. They fine streaming in internet explore. I read something on filters, but I don't think we've changed anything and I do not know how to find if there is a filter on or not. Here is an example of a site.

  Thank you all. It took about 5 tries to install and uninstall adobe flashplayer before I find that real player is mess up and I had to pass some things on RealPlayer. I have the cams on Firefox, but cannot get them on IE. Don't want to spoil a good thing on Firefox. I think that I accepted an update on Adobe. I'll be scared to do now! Thanks again. Very useful for pointing me in the right direction. It is quite frustrating.

• When I go to my E - Mail and want to send an e-mail to someone on my list. 3 sites appear with no e-mail address I want to delete.

  e-mail and will pass something, does not appear in my contacts how to remove them?

  When I go to my E - Mail and want to send an e-mail to someone on my list.  3 sites appear without email address I want to delete, keep in mind that they only show upward when I'm in an e-mail message and will pass something, does not appear in my contacts how to remove them?

  Hello

  ·         What mail client or webmail you use?

  .         What operating system do you use?

  About this request, I suggest you check with your support by email for assistance.

  If you use Windows live mail or Hotmail, you can post your query to the Windows Live forums:

  http://www.windowslivehelp.com/

  Or, if you use Microsoft Office Outlook, I suggest you post in the Office Outlook forums:

  http://answers.Microsoft.com/en-us/Office/Forum/Outlook

• How will I be informed when getting in and out a site with a secure server

  I can't find where to set the option for this. I could on Firefox 3.6
  Firefox 3.6 gives me a pop up that says I'm entering or leaving a site with a secure server. It's PARAMETERS in the Messages of warning on the Security tab in the window options. When you push the button PARAMETERS, a number of checkboxes allow for different parameters. I can't find it in Firefox 8.

  The settings for the 5 Warning Messages has been removed from security section in Firefox 4 and newer versions. These settings should be accessible through Subject: config now. So you're looking for the first and the third in the list below "parameters of the former in Firefox 3.6 on the Security Panel.

  See: http://kb.mozillazine.org/About:config

  1. type of topic: config in the URL bar and press the Enter key.
  2. If you see a cautionary, accept it (promise to be careful)
  3. Filter = security.warn_
  4. Double-click the pref in the lower panel on the subject: config display to toggle to true or false according to the descriptions below (scroll down to security.warn to see these particular preferences)
     • http://kb.mozillazine.org/About:config_entries #Security.

  Parameters of the ancients in Firefox 3.6 on the Security Panel
  
  Display a dialog warning when:

  • I'm about to view an encrypted page
    • Pref: security.warn_entering_secure
  • I'm about to view a page that uses low-grade encryption
    • Pref: security.warn_entering_weak
  • I leave a page encrypted to one that is not encrypted
    • Pref: security.warn_leaving_secure
  • I submit, information that is not encrypted
    • Pref: security.warn_submit_insecure
  • I'm about to view an encrypted page that contains unencrypted information
    • Pref: security.warn_viewing_mixed

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Try to build the application, the screw startup list is empty

  Hi all

  I am following the directions on this page:
  http://zone.NI.com/reference/en-XX/help/371361G-01/lvhowto/building_a_stand_alone_app/

  But somehow, when I get to Statup screw selection stage, the list is empty and cannot add the VI I intend to use it. Why is this happening? What step am I missing?

  Isaac,

  The first step in the help file you cite says «Open the LabVIEW project...» ».  You have your VI within a LabVIEW project?  If you want help with your Build, it would be useful to look at the project.  The best way to proceed is to implement the project (and all the screws, you wrote that belong to the project) within a Windows folder, compress the file (at one. Zip file) and fix it. Zip file.

  Bob Schor

• I am not able to connect on all sites with my system XP displays a 404 error code after a Trojan horse (trojan. ADH.2) was found and quarantined by norton.

  Hello, I'm not able to get online at all sites with my system XP displays a 404 error code after a Trojan horse (trojan. ADH.2) was found and quarantined by norton. The system is slow or bottleneck at all, but I think that the registry has taken hostage by this Trojan horse. I tried to run Add ons, reset IE8, reinstall IE8 offline, I tried different users, tried to run a different browser (firefox). I can ping all the sites in the cmd prompt, but have no luck connection in the browser. A ran mohamed, superspyware, spybot. Is that what I can do without having to re install? I don't have the OS XP Media.

  original title: error 404 on all sites

  I wouldn't worry IPSec.

  I think the most important things to address are:
  1 search for rootkits.
  2 empty the DNS.
  3 reset the proxy settings.
  4 reset the TCP/IP and Winsock settings.
  Good luck!

• Programs list is empty.

  I got a bad virus that took on my computer saying that the hard drive was bad. I return my computer finally after downloading avast and Windows security. The only problem is my program in the start menu list is empty (with the exception of Avast and Google Chrome I downloaded after disabled infection). The programs are always there, just not listed. To use them, I have to go through the help to find auto icons. Any help would be appreciated.

  Hello

  You can check this link:

  Incorrectly, Add/Remove Programs tool displays installed programs

  http://support.Microsoft.com/kb/266668

• Printer ports does not. Drop-down list is empty

  All my printer ports are gone!  They still exist in the registry - but when I go to try to choose a port for a printer to use the list is empty.  I can add a new TCP/IP port and it shows in the Ontario Regulation, but not in the list.  Help!

  Round trip that far with the system restore is not a good idea. System Restore is best used to solve immediate problems. I would no more than perhaps a week, week-1/2. Which printers are installed and how – local or network printers? The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have? MS - MVP - Elephant Boy computers - don't panic!

• Turbo Tax CD setup.exe file not available in Explorer. CD is listed in the Explorer with an Apple on the drive.

  My Turbo Tax CD does not start automatically with the initial insertion in the CD player.  The CD is listed in the Explorer with an Apple on the drive.  The Explorer does not list the file setup.exe on the CD.  However, he lists a few other folders.  I use Vista to try to load the CD.  The CD does very well on my XP computer.  Is there a problem with Vista with the CD that are for MAC and Windows PC?

  Hi Undertaker Farmer,

   

  Welcome to Microsoft Answers Forums.

  • You get the error message?
  • What is the edition of Windows vista installed on the computer?

  TurboTax is a non-Microsoft program and we are not trained in this regard. However I will try my best to help you. Please, follow these tips and see if it works.

  As a work around you perhaps activate the AutoPlay for the CD and check if the auto play works.

  When you turn automatic playback, you can choose what should happen when you insert different types of digital media into your computer. For example, you can choose what digital media player is used to play CDs. When AutoPlay is disabled, you are prompted to choose what you want to do when you insert media files in your computer.

  1. Open AutoPlay by clicking the Start button, clicking Control Panel, on material and audioand then click AutoPlay.
  2. Do one of the following:
     • To turn AutoPlay on, select the Use AutoPlay for all media and devices check box.
     • To turn AutoPlay off, clear the Use AutoPlay for all media and devices check box.
  3. Click Save.

  You can also try to copy all the contents of the CD to the hard drive and try to install and check.

  You can also try to run the file Setup from the command prompt and check what is happening.

  Click Start and type cmd and press enter in the command prompt window type the following command : \setup.exe and press ENTER.

  See also the link below for the site of TurboTax on the requirements and check if your computer meets the condition.

  TurboTax 2008 system requirements

  http://TurboTax.Intuit.com/support/kb/installing/system-requirements/6389.html

  If fail steps above I would suggest that you contact TurboTax support for more options, see the link below.

  http://community.Intuit.com/QuickBooks

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Parental control blocks WMA format audio playback of the site on the list of allowed sites

  I use Windows Vista Home Edition basic pm a Compaq desktop computer. I've set up parental controls for the user account of my son. Under parental controls, I've marked ', apply the current settings,' ' we vires infromation on the use of the activity, ' no time limit are marked, games is marked not for theirs does not, all programs are allowed - none is marked to the block, and web restrictions are marked Allow list only. When he goes to his school site at home (which is on the list of allowed sites) and clicks on an audio conference that is WMA format it said of a box with Windows Media Player, along the top border and the message: Windows Media Player cannot perform the requested operation because the Parental control filter Web is turned on. To enable this action, ask your administrator to disable the web filter for your user account. Is it possible to get this set up so I don't have to temporarily turn off the parental control. Which kind of defeated the purpose controls, if I turn them off for this presentation, he will have free access to the Internet until I turn it back on. This means that I need to sit on it during the time that parental control is switched off! Not funny! I love being able to allow only the sites that I approved, if I could just allow him to hear the audio to WMA format that would be great. Any ideas?

  MaryAnn (easily confused)

  Cannot help you with the Parental control, sorry. Sound you like you want as your completely locked computers. If this is the case, see the eBlaster . MS - MVP - Elephant Boy computers - don't panic!

• What is the link state Power Management under PCI Express power management Options list

  What is link State Power Management under PCI Express power management Options list.

  What is link State Power Management under PCI Express power management Options list.

  Hello

  The PCI Express Link State Power Management option is part of the PCI-E specification and is working with the State active power management (ASPM) in Windows 7.

  It is a complex subject, but can be simply described as follows.

  There are 2 levels of power management in PCI Express options.

  The difference between these 2 options are the energy savings compared to the latency (time to recover from sleep state).

  If you select the first option, moderate energy savings, energy savings are lower, but the time to recover from sleep state (latency) is much shorter.

  If you select Maximum energy savings, energy savings are more important, but the time to recover from sleep state (latency) is much longer.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• PIX v6.3 Site-to-Site with policy NAT

  Hi guys,.

  I need to set up a site to site with nat because we have overlapping subnet at the other end.

  They need access to both servers on our network with IP static.

  Site A: 192.168.100.0/24

  Site b: 192.168.200.128/25

  The other site has chosen this network for NAT: 10.200.50.0/28

  I need to translate

  192.168.100.10 > 10.200.50.2

  192.168.100.20 > 10.200.50.3

  through the tunnel

  That's what I've done so far, will this work? Any problem that may appear with this config?

  Crypto ACL:

  VPN ip 10.200.50.0 access list allow 255.255.255.240 192.168.200.128 255.255.255.128

  Policy_NAT1 list of allowed access host ip of 192.168.100.10 192.168.200.128 255.255.255.128

  Policy_NAT2 list of allowed access host ip 192.168.100.20 192.168.200.128 255.255.255.128

  NAT (inside) 10 access-list Policy_NAT1 0 0

  NAT (inside) 11 access-list Policy_NAT2 0 0

  overall 10 10.200.50.2 (outside)

  Overall 11 10.200.50.3 (outside)

  Thanks in advance!

  Hello

  Your configuration looks very good.

  Although I guess it's a dynamic configuration policy NAT/PAT.

  Incase you want to configure static policy NAT, you need to change a bit. I mean if you wanted a NAT configuration allowing to form bidirectional connection. Both from your site to the remote site and the remote site to your side. You can always use the same ACL you have configured, but you would use the "static" configurations.

  public static 10.200.50.2 (inside, outside) - Policy_NAT1 access list

  public static 10.200.50.3 (inside, outside) - Policy_NAT2 access list

  Review with the static NAT to politics and the dynamic policy NAT/PAT which would be if these hosts have static NAT configured at the direction of the 'outside' interface while static NAT would cancel both of these configurations.

  If you use the political dynamic NAT and had also a static NAT for the host, then you would have to change from the above static NAT in a policy to override the static NAT.

  And with the foregoing in mind possible existing static NAT and new static NAT of policy might have some problems as a whole. In this case the scheduling of NAT rules would determine if static NAT of the policy has been applied already. If you already had the configured static NAT then it would nullify the political new static NAT:. The solution would be to remove the static NAT and enter it again. This would move the static NAT once the static NAT to policy in the order that they appear on the CLI format configuration and, therefore, static political NAT would work for the specified destination and addresses the static NAT for all other destination addresses.

  Hope I made any sense

  Feel free to ask more if necessary while

  -Jouni

• Need help with the configuration of the Site with crossed on Cisco ASA5510 8.2 IPSec VPN Client (1)

  Need urgent help in the configuration of the Client VPN IPSec Site with crossed on Cisco ASA5510 - 8.2 (1).

  Here is the presentation:

  

  There are two leased lines for Internet access - a route 1.1.1.1 and 2.2.2.2, the latter being the default Standard, old East for backup.

  I was able to configure the Client VPN IPSec Site

  (1) with access to the outside so that the internal network (172.16.0.0/24) behind the asa

  (2) with Split tunnel with simultaneous assess internal LAN and Internet on the outside.

  But I was not able to make the tradiotional model Hairpinng to work in this scenario.

  I followed every possible suggestions made on this subject in many topics of Discussion but still no luck. Can someone help me here please?

  Here is the race-Conf with Normal Client to Site IPSec VPN configured with no access boarding:

  LIMITATION: Cannot boot into any other image ios for unavoidable reasons, must use 8.2 (1)

  race-conf - Site VPN Customer normal work without internet access/split tunnel

  : ASA Version 8.2 (1) ! ciscoasa hostname domain cisco.campus.com enable the encrypted password xxxxxxxxxxxxxx XXXXXXXXXXXXXX encrypted passwd names of ! interface GigabitEthernet0/0 nameif outside internet1 security-level 0 IP 1.1.1.1 255.255.255.240 ! interface GigabitEthernet0/1 nameif outside internet2 security-level 0 IP address 2.2.2.2 255.255.255.224 ! interface GigabitEthernet0/2 nameif dmz interface security-level 0 IP 10.0.1.1 255.255.255.0 ! interface GigabitEthernet0/3 nameif campus-lan security-level 0 IP 172.16.0.1 255.255.0.0 ! interface Management0/0 nameif CSC-MGMT security-level 100 the IP 10.0.0.4 address 255.255.255.0 ! boot system Disk0: / asa821 - k8.bin boot system Disk0: / asa843 - k8.bin passive FTP mode DNS server-group DefaultDNS domain cisco.campus.com permit same-security-traffic inter-interface permit same-security-traffic intra-interface object-group network cmps-lan the object-group CSC - ip network object-group network www-Interior object-group network www-outside object-group service tcp-80 object-group service udp-53 object-group service https object-group service pop3 object-group service smtp object-group service tcp80 object-group service http-s object-group service pop3-110 object-group service smtp25 object-group service udp53 object-group service ssh object-group service tcp-port port udp-object-group service object-group service ftp object-group service ftp - data object-group network csc1-ip object-group service all-tcp-udp access list INTERNET1-IN extended permit ip host 1.2.2.2 2.2.2.3 access-list extended SCC-OUT permit ip host 10.0.0.5 everything list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq www list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any https eq list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq ssh list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 no matter what eq ftp list of access CAMPUS-LAN extended permitted udp 172.16.0.0 255.255.0.0 no matter what eq field list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq smtp list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq pop3 access CAMPUS-wide LAN ip allowed list a whole access-list CSC - acl note scan web and mail traffic access-list CSC - acl extended permit tcp any any eq smtp access-list CSC - acl extended permit tcp any any eq pop3 access-list CSC - acl note scan web and mail traffic access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 993 access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq imap4 access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 465

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq www

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq https

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq smtp

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq pop3

  access-list extended INTERNET2-IN permit ip any host 1.1.1.2

  access-list sheep extended ip 172.16.0.0 allow 255.255.0.0 172.16.0.0 255.255.0.0

  access list DNS-inspect extended permit tcp any any eq field

  access list DNS-inspect extended permit udp any any eq field

  access-list extended capin permit ip host 172.16.1.234 all

  access-list extended capin permit ip host 172.16.1.52 all

  access-list extended capin permit ip any host 172.16.1.52

  Capin list extended access permit ip host 172.16.0.82 172.16.0.61

  Capin list extended access permit ip host 172.16.0.61 172.16.0.82

  access-list extended capout permit ip host 2.2.2.2 everything

  access-list extended capout permit ip any host 2.2.2.2

  Access campus-lan_nat0_outbound extended ip 172.16.0.0 list allow 255.255.0.0 192.168.150.0 255.255.255.0

  pager lines 24

  Enable logging

  debug logging in buffered memory

  asdm of logging of information

  Internet1-outside of MTU 1500

  Internet2-outside of MTU 1500

  interface-dmz MTU 1500

  Campus-lan of MTU 1500

  MTU 1500 CSC-MGMT

  IP local pool 192.168.150.2 - 192.168.150.250 mask 255.255.255.0 vpnpool1

  IP check path reverse interface internet2-outside

  IP check path reverse interface interface-dmz

  IP check path opposite campus-lan interface

  IP check path reverse interface CSC-MGMT

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 621.bin

  don't allow no asdm history

  ARP timeout 14400

  interface of global (internet1-outside) 1

  interface of global (internet2-outside) 1

  NAT (campus-lan) 0-campus-lan_nat0_outbound access list

  NAT (campus-lan) 1 0.0.0.0 0.0.0.0

  NAT (CSC-MGMT) 1 10.0.0.5 255.255.255.255

  static (CSC-MGMT, internet2-outside) 2.2.2.3 10.0.0.5 netmask 255.255.255.255

  Access-group INTERNET2-IN interface internet1-outside

  group-access INTERNET1-IN interface internet2-outside

  group-access CAMPUS-LAN in campus-lan interface

  CSC-OUT access-group in SCC-MGMT interface

  Internet2-outside route 0.0.0.0 0.0.0.0 2.2.2.5 1

  Route internet1-outside 0.0.0.0 0.0.0.0 1.1.1.5 2

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  AAA authentication enable LOCAL console

  Enable http server

  http 10.0.0.2 255.255.255.255 CSC-MGMT

  http 10.0.0.8 255.255.255.255 CSC-MGMT

  HTTP 1.2.2.2 255.255.255.255 internet2-outside

  HTTP 1.2.2.2 255.255.255.255 internet1-outside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs set group5

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  Crypto map internet2-outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  crypto internet2-outside_map outside internet2 network interface card

  Crypto ca trustpoint _SmartCallHome_ServerCA

  Configure CRL

  Crypto ca certificate chain _SmartCallHome_ServerCA

  certificate ca xyzxyzxyzyxzxyzxyzxyzxxyzyxzyxzy

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as

  quit smoking

  ISAKMP crypto enable internet2-outside

  crypto ISAKMP policy 10

  preshared authentication

  aes encryption

  md5 hash

  Group 2

  life 86400

  Telnet 10.0.0.2 255.255.255.255 CSC-MGMT

  Telnet 10.0.0.8 255.255.255.255 CSC-MGMT

  Telnet timeout 5

  SSH 1.2.3.3 255.255.255.240 internet1-outside

  SSH 1.2.2.2 255.255.255.255 internet1-outside

  SSH 1.2.2.2 255.255.255.255 internet2-outside

  SSH timeout 5

  Console timeout 0

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal VPN_TG_1 group policy

  VPN_TG_1 group policy attributes

  Protocol-tunnel-VPN IPSec

  username ssochelpdesk encrypted password privilege 15 xxxxxxxxxxxxxx

  privilege of encrypted password username administrator 15 xxxxxxxxxxxxxx

  username vpnuser1 encrypted password privilege 0 xxxxxxxxxxxxxx

  username vpnuser1 attributes

  VPN-group-policy VPN_TG_1

  type tunnel-group VPN_TG_1 remote access

  attributes global-tunnel-group VPN_TG_1

  address vpnpool1 pool

  Group Policy - by default-VPN_TG_1

  IPSec-attributes tunnel-group VPN_TG_1

  pre-shared-key *.

  !

  class-map cmap-DNS

  matches the access list DNS-inspect

  CCS-class class-map

  corresponds to the CSC - acl access list

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  CCS category

  CSC help

  cmap-DNS class

  inspect the preset_dns_map dns

  !

  global service-policy global_policy

  context of prompt hostname

  Cryptochecksum: y0y0y0y0y0y0y0y0y0y0y0y0y0y

  : end

  Adding dynamic NAT for 192.168.150.0/24 on the external interface works, or works the sysopt connection permit VPN

  Please tell what to do here, to pin all of the traffic Internet from VPN Clients.

  That is, that I need clients connected via VPN tunnel, when connected to the internet, should have their addresses IP NAT'ted against the address of outside internet2 network 2.2.2.2 interface, as it happens for the customers of Campus (172.16.0.0/16)

  I am well aware of all involved in here, so please be elaborative in your answers. Please let me know if you need more information about this configuration to respond to my request.

  Thank you & best regards

  MAXS

  
  

  Hello

  If possible, I'd like to see that a TCP connection attempt (e.g. http://www.google.com) in the ASDM logging of the VPN Client when you set up the dynamic NAT for the VPN Pool also.

  I'll try also the command "packet - trace" on the SAA, while the VPN Client is connected to the ASA.

  The command format is

  packet-tracer intput tcp

  That should tell what the SAA for this kind of package entering its "input" interface

  Still can not see something wrong with the configuration (other than the statement of "nat" missing Dynamics PAT)

  -Jouni

• Site to Site with the subnets overlap

  Hi all

  Search for comfirmation on what is / is not possible. In short, we have a requirement of site but our local LAN varies from conflict. I am aware of how this get up and running with the help of a pool of IP addresses that is a basic ASA/IOS device can NAT behind but I wonder if it is possible to NAT behind a single IP address. NAT is also in place for the general internet traffic, but I hope that the image attached best describes our scenario.

  Any help / advice appreciated.

  Kind regards

  Martyn

  Hello

  You will need to do NAT on both ends to get the installation work.

  With these types of configurations, I more often just a 24 natted network to 24 another network on both sites.

  You can configure one of the sites use a PAT address towards the other end, but the other end must have protected by some sort of NAT static between the hosts unique or equal to 24 networks.

  If you would happen to configure both sites with a PAT translation, you couldn't really initiate connections between the site because no real host on networks 192.168.1.0/24 would have their own specific NAT IP to connect to.

  So in short

  • Both sites need NAT network
  • Use 1:1 NAT static is between host addresses or complete networks on both sites
    • The two sites could start the connection to any host on the remote end every single host has its own IP NAT staticly assigned address
  • Use of PAT for site and other NAT static 1:1 with the addresses of host or complete networks on the other site
    • Site with unique PAT IP address can connect to all hosts of remote sites, since they have staticly NAT IP addresses assigned.
    • Homepage is not able to connect to any host at his remote site that the remote site has only a PAT address facing their way.

  If you had 2 ASAs with 8.2 or UNDER software your static NAT configurations could be e.g.

  Basic information

  • Site1: 192.168.1.0/24
  • Site1 NAT: 10.10.1.0/24
  • Site2: 192.168.1.0/24
  • Site2 NAT: 10.10.2.0/24

  Static configuration NAT of policy site1

  permit L2L-VPN-POLICYNAT from the list of access ip 192.168.1.0 255.255.255.0 10.10.2.0 255.255.255.0

  public static (inside, outside) 10.10.1.0 - L2L-VPN-POLICYNAT access list

  Static configuration NAT of policy site2

  permit L2L-VPN-POLICYNAT from the list of access ip 192.168.1.0 255.255.255.0 10.10.1.0 255.255.255.0

  public static (inside, outside) 10.10.2.0 - L2L-VPN-POLICYNAT access list

  PAT configuration at each end

  permit L2L-VPN-POLICYPAT from the list of access ip 192.168.1.0 255.255.255.0 10.10.x.0 255.255.255.0

  Global 10.10.x.1 of xxx (outside)

  NAT (inside) xxx access-list L2L-VPN-POLICYPAT

  If you had 2 ASAs with 8.3 or above software your static NAT configurations could be for example (same information base)

  Static configuration NAT of policy site1
  

  the object of the LAN network

  subnet 192.168.1.0 255.255.255.0

  network of the LAN - NAT object

  10.10.1.0 subnet 255.255.255.0

  network of the REMOTE object

  255.255.255.0 subnet 10.10.2.0

  static (inside, outside) 1 static source LAN LAN - NAT static destination REMOTE

  Static configuration NAT of policy site2

  the object of the LAN network

  subnet 192.168.1.0 255.255.255.0

  network of the LAN - NAT object

  255.255.255.0 subnet 10.10.2.0

  network of the REMOTE object

  10.10.1.0 subnet 255.255.255.0

  static (inside, outside) 1 static source LAN LAN - NAT static destination REMOTE

  PAT configuration at each end

  the object of the LAN network

  subnet 192.168.1.0 255.255.255.0

  network of the LAN-PAT object

  Home 10.10.x.1

  network of the REMOTE object

  10.10.x.0 subnet 255.255.255.0

  static (inside, outside) 1 dynamic source LAN LAN-PAT destination static REMOTE

  -Jouni