Order urgent WLST: calling shell script

Similar Questions

• Calling shell script program SQL and passing parameters

  Hi guys,.
  Greetings from Toronto. Is it possible to move one or more strings as parameters to a sql from shell script program?
  
  Shell script

  # Accept system input parameters
  p_user_id=$1
  p_job_id=$2
   
  sqlplus.exe -s $p_user_id @$RD_PATH/rd_test.sql $p_user_id $p_job_id

  SQL program (rd_test.sql)
  

  -- Accept system input parameters
  define p_user_id = &1
  define p_job_id = &2
  
  -- Wondering if its possible to pass these 3 parameters from a shell script program.
  -- (1) rd_test-$p_job_id-3-1.lis
  -- (2) RD_PRINTER(rd_test,3)
  -- (3) t_data
  
  select
  t_data=''rd_test-'||'''$p_job_id'''||'-1-1.txt''
  t_data_dir=''.''
  ksh $RD_PATH/another_shell_prog.sh $p_user_id $p_job_id '||a.rd_value||' '
  ||b.rd_value||' rd_test-$p_job_id-3-1.lis $RD_PRINTER(rd_test,3) '||
  '$t_data $t_data_dir'||'
  exit_status=$?
  check_command'
  from rd_job_parameter b, rd_job_parameter a
  where a.job_id = &2
  and a.jp_module_id = 'RDTEST'
  and b.job_id = a.job_id
  and b.module_id = a.module_id
  /

  As always, this is not something I have to solve that minute. Any help would be appreciated
  and I will think of the problem.
  
  Thank you
  REDA
  
  Published by: Raj404261 on June 25, 2009 11:40
  
  Published by: Raj404261 on June 25, 2009 17:29

  OK, just a few pointers possible if you need to go the way of shell script.

  I suggest that you have a separate SQL script for each of your options, which retains the fairly well-defined lines and keeps the maintenance as simple as possible. Therefore, in your shell script, you can have something like:

  #!/bin/ksh
  # Accept system input parameters
  p_user_id=$1
  p_job_id=$2
  
  # Deduce which script you'll call here
  # using if statements, or even a case:
  
  if [[ p_job_id -eq 1 ]]
  then
    SQL_SCRIPT=sql_script1.sql
  else
    SQL_SCRIPT=sql_script2.sql
  fi
  
  # Or using case
  
  case $2
    in
      1)     SQL_SCRIPT=sql_script1.sql;
  
      2)     SQL_SCRIPT=sql_script2.sql;
  
      3)     SQL_SCRIPT=sql_script3.sql;
  
      *)     SQL_SCRIPT=sql_script4.sql;
  esac
  
  export ${SQL_SCRIPT}
  
  #If you need to query the database at all to deduce which script to cal
  #Then something like this:
  
  SCRIPT_VAR=`sqlplus -s username/password << EOF
  set heading off
  set feedback off
  set verify off
  SELECT * FROM DUAL;
  EOF`
  
  export {SCRIPT_VAR}
  
  SQL_SCRIPT=sql_script${SCRIPT_VAR}.sql
  
  # Then just call your script:
  sqlplus. -s $p_user_id/password @${SQL_SCRIPT}
  

• Call Shell Script from within PL/SQL - using DBMS_PIPE

  Hi all

  I'm trying to run a shell script inside my PL/SQL using DBMS_PIPE block (not sure if this is the right way or not)

  Pl Sql script

  ==========

  Set serveroutput size 100000

  declare

  cursor c1 is select * from mag_images

  where nom_image like '% comp2.

  v_path varchar2 (100): = ' / home/maguzzi/DOCUMENTS_DIR / ";

  v_result number: = 0;

  v_in_filename varchar2 (100): = v_path | ' test_file.jpg';

  v_out_filename varchar2 (100): = v_path | ' test_file_out.jpg';

  v_script varchar2 (100): = "tst_convert.sh";

  v_command varchar2 (200): = 'sh'. v_path | v_script | » '|| v_in_filename | » '|| v_out_filename;

  Start

  A1 to c1 loop

  dbms_output.put_line ('v_command: ' | v_command);

  write_to_file ('test_file.jpg', 'DOCUMENTS_DIR', a1. Content);

  dbms_output.put_line (' file write result: ' | v_result);

  v_result: = exec_host_command (v_command);

  dbms_output.put_line (' resize result :'|| file v_result);

  end loop;

  end;

  Result DBMS_OUTPUT

  ====================

  v_command: /home/maguzzi/DOCUMENTS_DIR/tst_convert.sh test_file.jpg test_file_out.jpg

  Result of the entry of the file: 0

  Result of resizing the file: 0

  PL/SQL procedure successfully completed.

  Function exec_host_command

  =======================

  FUNCTION to CREATE or REPLACE exec_host_command (lc_cmd IN VARCHAR2)

  RETURN INTEGER IS

  ln_status NUMBER;

  lc_errormsg VARCHAR2 (80);

  lc_pipe_name VARCHAR2 (30);

  BEGIN

  lc_pipe_name: = 'Maguzzi_PIPE ';

  DBMS_PIPE. PACK_MESSAGE (lc_cmd);

  ln_status: = dbms_pipe.send_message (lc_pipe_name);

  RETURN ln_status;

  END;

  /

  The Image of the BLOB is written to the correct location on the server "test_file.jpg", and although the exec_host_command function returns a value of 0, the shell script (tst_convert.sh) is not executed (i.e. no output file is created - outfile.txt and the image is not copied/converted to a new file name "" test_file_out.jpg" )

  Shell script

  ========

  tst_convert.sh

  echo 'Here' > outfile.txt

  Echo $1 > > outfile.txt

  Echo $2 > > outfile.txt

  resizing to convert $1 - $200 2

  Could this be problems with permissions on files?

  test_file1.jpg has permission - rw-rw-r-

  test_convert.sh a permission rwxrwxrwx

  When I run the script manually and pass in 2 parameters ($1 = infilename and $2 = outfilename), it works...

  I'd appreciate if someone can point out my mistake or suggest another method that works.

  Thanks in advance

  How long does it take to create the converted file? Remember that the external Scheduler is running asynchronously, so it is possible that the converted file does not exist yet when the PL/SQL block subsequently tries to open it.

  Try to add some delay seconds to the routine to ensure that the external task is completed:

      begin
        dbms_scheduler.create_job(
            job_name => 'MAG_IMAGE_CONVERT2'
          , job_type => 'EXECUTABLE'
          , job_action => '/home/oracle/DOCUMENTS_DIR/tst_convert2.sh' );--  '/home/oracle/DOCUMENTS_DIR/tst_convert.sh');
        dbms_scheduler.enable('MAG_IMAGE_CONVERT2');
        dbms_lock.sleep(3);
      end;
  

  This probably isn't really a viable solution in the long term if it turns out that this is really the problem.

• How to call the script shell of the Hyperion Workspace

  Hi all

  I have to call a shell script of the Hyperion workspace. After searching on Google, I came to know that its possible using generic employment applications.

  So I created a generic job application in the workspace to help below in detail.

  Job name: set_run_shell

  Server: Name of the Server workspace

  Order tempate: $PROGRAM $PARAMS

  executable: Cygwin executable path (like hyperion installed in windows server 2008, I had to install Cygwin to make the unix-like environment)

  Just write simple shellscript that the ECHO command displays "Hello World."

  Imported this shell script and above assigned jobs for it but no luck, when I run this job I never see output or less error. It showing the message running for a long time until get session expires.

  Can someone help me to run a shell script.

  Thank you

  Aravind

  The executable file must be %WINDIR%\System32\cmd.exe cmd.exe

  You will also need to create a batch file that comes from this sh.exe and imports that work. Try and let me know.

  Concerning

  Celvin Kattookaran

• Insert a record, call a stored procedure and execute a shell script

  Hello

  I am trying to build a page APEX do these three things in order.

  #1. Insert a new record in a database table (pk, donnees_xml, attr1 and attr2, etc.) and download the XML file to the donnees_xml column

  #2. Save this XML file on a file system

  #3. Parse the XML file on a file system and update the database with the parsed data table

  I can do #1 with a regular shape based on the database table. I can do #2 with a stored procedure.

  I can do #3 with a shell script.

  I wonder how these tasks can be combined into a single action in APEX.

  do #1;

  If successful, do #2;

  If successful, do #3;

  I'd appreciate comments on this.

  Thank you

  Define a process of PL/SQL page submit that runs after the record is inserted, if P1_FILE is not null.

• Call the batch file and not the shell script using measures of the event

  Can I use EVENTACTIONS at the door of gold like

  eventactions (SHELL, /path-to-batch-file/test1.bat)

  will this work? I am on a windows machine, so I need to run a batch file and not a shell script

  In GGSCI, you can shell OUT to the BONE and call a command/executable file.

  For example on Windows:

  GGSCI (WIN2003) 2 > shell dir

  Volume in drive C has no label.

  Volume serial number is 8CCC-9E58

  Directory of C:\ggs

  18/08/2012 07:23

  .

  18/08/2012 07:23

  ...

  2010-10-15 06:37 bcpfmt.tpl 426

  2010-10-15 06:37 bcrypt.txt 1 725

  22/04/2011 03:41 2 560 category.dll

  05/11/2011 10:43

  cfg

  2010-10-15 07:15 739 chkpt_ora_create.sql

  ...

  What were the results when you tried this in an EVENTACTIONS clause?

• Call the OBIEE Unix Shell Script

  Hi all
  
  Is it possible to make a call to a Unix Shell Script with the framework of the Action of OBIEE.
  
  Thanks in advance

  I don't think, but we can go for it instead side BI. Try to transfer the same features side shell script so that the script can identify your report using the tail of the log nqquery and execute the rest of your lines in shell script.

  This can done and works as expected. If you identify your report instead of this long logical query at all with my suggestion that you can go for a little keyword.

  Score pls help if

• Call the PL/SQL shell script

  Hi all
  
  I've seen several links and options for calling a PL/SQL shell script. I was wondering if there is something like DBMS_SCHEDULER. CREATE_PROGRAM-> executable that calls an external program in 11 GR 2.
  
  Here's what I have to. I have 11 GR 2 database with Dataguard. I have START triggering who begins a DBMS_SERVICE when the role becomes PRIMARY. In the same instance, I would stop the VIP on the former primary database and start the VIP on the new primary database.
  
  Thanks for the advice and assistance.
  
  Jan S.

  The URL below links to ask Tom. Inside, he talks about creating a Java procedure in your database that allows you to execute commands from the host OS (PL/SQL calls the proc of Java that runs the host command). There are several ways to run the OS commands, but this one is very flexible. I needed to use it for a task that I have who didn't fit one of the other methods very well.

  http://asktom.Oracle.com/pls/Apex/f?p=100:11:0:no:P11_QUESTION_ID:3069633370832

• Need to call the Shell script that uses SQL loader in APex4.1 / 11g

  Hello!
  
  I have a requirement in which I need to call a shell script that connects to an external server, FTP to a file and then use sqlloader to load data into our table. We have now the ftp script that accomplishes this task to another program, but is a scheduled task. I wanted to call the script ftp in the APEX. Any suggestions on how this can be done, what is the logic of PL/SQL can we use? I saw online some people using DBMS Scheduler for this?
  
  Thank you
  Sun

  Hello

  Create some sh script on your computer host oracle where you can join in the external server and run the process.
  something like:

  run_external_sh.sh

  #!/bin/sh
  ssh ext_user@ext_host ./sqlloader/import/import.sh
  

  Then create an external TASK to call it via ORACLE (PL/SQL)

  -Shell Script call.

  BEGIN
    DBMS_SCHEDULER.create_program (
      program_name        => 'external_call_sh',
      program_type        => 'EXECUTABLE',
      program_action      => '/local_host/call_external/sh/run_external_sh.sh',
      number_of_arguments => 0,
      enabled             => TRUE,
      comments            => 'Call external SH script');
  END;
  /
  

  You can now create a regular / or unplanned WORK
  -Job defined by the calendar and an existing program.

  BEGIN
    DBMS_SCHEDULER.create_job (
      job_name      => 'jb_external_call_sh',
      program_name  => 'external_call_sh',
      schedule_name => 'external_call_scheduler', -- created scheduler
      enabled       => TRUE,
      comments      => 'Job defined by an existing external_call_sh program and schedule.');
  END;
  /
  

  You can now call the WORK in the APEX in the process of PL/SQL.

  BEGIN
    -- Run job synchronously.
    DBMS_SCHEDULER.run_job (job_name            => 'jb_external_call_sh');
  END;
  

  Concerning
  J :D

• Call a script shell to an OWB mapping or process flow

  Hello
  
  is it possible to call a shell script for a mapping owb or process flow and how can I do this?
  
  Greetings

  Check this box: -.

  http://blogs.Oracle.com/warehousebuilder/2010/05/how_to_use_user_defined_activity_in_owb_process_flow.html

  See you soon
  Katia

• Call a shell script using the OA framework page.

  Hi all
  I'm new to Framework.There OA is a condition in which I have to call a shell script using a Web page using OA framework. Can someone shed some light on how can we do this?
  
  Concerning

  Hello

  You can save the script shell as simultaneous program and submit this OAF page request.

  Sambi

• pl/sql to java shell script

  This issue crosses many boundaries, but it begins with PL/SQL, and I hope that there is sufficient expertise here in order to cover the basics.
  
  System: Oracle 11.2.0.1.0 on Oracle 5, 64 - bit Linux
  
  I have a PL/SQL, java appeal procedure, which in turn calls a shell script. I put a few diagnostic output in the shell script, the redirection of stdout to a file in / tmp. running the script from the command line works perfectly. When it is called by procedures, no output.
  
  Here is the 'chain of traceability', somehow...
  
  In the PL/SQL:

  Host_Command (p_command => v_command||v_control_file||v_orasid);

  where the variable v_command = /opt/u01/app/oracle/admin/control/sqlldr3_test.script
  
  
  So this is 'Host_command', the whole procedure procedure:

  CREATE OR REPLACE  PROCEDURE "DW"."HOST_COMMAND" (p_command  IN  
      VARCHAR2)
  AS LANGUAGE JAVA
  NAME 'Host.executeCommand (java.lang.String)';

  And the shell script /opt/u01/app/oracle/admin/control/sqlldr3_test.script:

  #!/bin/ksh
  export trcfle=/tmp/edstest.$$
  export ORACLE_SID=$2
  export ORACLE_HOME=/u01/app/oracle/product/11.2.0/dwdev
  export PATH=$PATH:/u01/app/oracle/product/11.2.0/dwdev/bin
  export ORACLE_BASE=/u01/app/oracle
  export SQLLDR_CONTROLFILE=$1
  #
  echo input parms are $* >> $trcfle
  echo environment is: >> $trcfle
  env|grep -i ORACLE|grep -v grep|sort >> $trcfle
  #
  exit

  but in the end, there is no /tmp/edstest.* file

  oracle$ ls -ltr /tmp/eds*
  ls: /tmp/eds*: No such file or directory
  oracle$

  open to all ideas.
  
  I cut things down to their bases, but with the exception of the line of the high level process, the code above is finished... is that my test cut original scripts to exactly what is show. Requriement of business is to take existing scripts and remove some of the stuff that is hard coded, allowing procedures move from dev to qa to prod without hardcoded values unique to each environment.
  
  I'm very comfortable with PL/SQL and more with shell scripts, but the java link is a black hole for me.

  When the proc of Java runs the external command, a child process of Unix/Linux is created for it. This process inherits the environment settings of the parent process - that would be a dedicated server process, a work process or shared in the pool of the MTS server process.

  These processes have parameters of environment of bare bones and something fundamental that + $PATH + should not be approved as being valid and usable.

  If the Java code should fully qualify the path to the executable file to run.

  Java code should do 2 things - stdout (and stderr if possible) back to the appellant to PL/SQL as vacrhar2 of the parameters out. And return the exit code of the child process.

  They help a lot in troubleshooting why an outgoing external call failed.

  We use these external calls widely enough (through a number of interfaces, treatments to distance running and pulling on the release of data by the latter in the database). All driven from PL/SQL using the proc of Java to make an outgoing call. If the basics are working-, but there seems to be a constant learning and troubleshooting curve to follow to get this working in a robust way.

• import program does not process customized when you use the shell script

  Hello

  I have the pkg in that

  PROC1 without leaving param in this procedure, I call you created proc2 import and program

  Now, I call this proc1 in the shell script, here my flat program to import does not work

  Why? and I try to use CONSCUB on proc1 using 2 output param which is errbuf, retcode in the newspaper, I'm "wrong number of arguments"

  Please help me?

  Thank you

  Renon,

  Proc1 is your first program at the same time, right?

  How many parameters is defined for that?

  You can paste a screenshot of the window parameter?

  If there is no parameter, just use this:

  $FND_TOP/bin/CONCSUB $LOGIN SQLAP 'Accounts payable Manager' WAIT ' rajesh' = N SIMULTANEOUS SQLAP PROC1

  Assuming that "Renon" is a username of fnd and the program is set in the Application of accounts payable.

  See you soon

  AJ

• The work of the Disqualification of Linux Shell Script

  Hello

  We are the 11.1.1.7.3 with Weblogic Web server and Linux App Server Disqualification.

  I want to know how we can carry out the work of the Disqualification of the Linux and write these commands in the shell script.

  (1) present the task (run)

  (2) check the employment status to see if the work is in working condition or supplement

  I know that on Windows, it utility jmxtools.jar of command line operations in dnDirector/Tools folder. But I'm not able to find the jmxtools.jar file in one of the edq.home or edq.local.home of the directories under Linux install.

  Can you guide me to the location where the jmx utility will be available under Linux and also the command to check the status of the job?

  Thank you

  Ravi

  It's him!

  Jobs called via the command line interface return an exit status when finished.

  Monitor the precise status of the long-term work requires the use of the server of the Disqualification Console user interface.

• will not appear sql statemnt in shell script

  Hello

  I have a shell script with an unfavourable sql she calls another script where I connect to dabase.

  In the journal of the script, I see the sql statement and I wish that that do not show me anything. How I make these?

  Thank you

  Hello

  2650697 wrote:

  Hello

  I have a shell script with an unfavourable sql she calls another script where I connect to dabase.

  In the journal of the script, I see the sql statement and I wish that that do not show me anything. How I make these?

  Thank you

  Your postal code.  It is very difficult to tell what you're doing wrong without knowing what you are doing.

  You can have SQL statements directly in your shell script.  They must be in a script by themselves, said fubar.sql, and shell script must contain

  @fubar

  instead of real SQL statements.