Organizers shared, PRE and PSE?

Similar Questions

• Installation of PSE9 begins to recede to the shared technologies and does not install

  I am trying to install PSE9 on a small laptop that does not have a CD/DVD ROM drive  Then I copied the program on a USB and it seems to have the whole program on this subject.  It goes through the first part of the installation very well and the icon appears on the desktop.  It happens to 'installation of necessary shared technologies' and the following action shows "roll back the installation of PSE9.        Currently on the desktop, the icon of PSE9 disappears, and the next section says "roll back the installation of organizing PSE9", then the window pops up that says install shield wizard completed and, "the wizard was interrupted before PSE9 could be completely installed... below mentioned application failed to install: TECHNOLOGY SHARED.»  then I click Finish and it only remains to install it anywhere in the computer.  It's frustrating and I don't know that this somethinbg is left out when I download the program to the USB but I don't have another way to do it except if it can be installed directly from Adobe.  Can I do this?

  first of all, make sure you have a full installer:

  If you follow the 7 steps, you can download the trial of pse: http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml

  Use your serial number to activate.

  If you have any problem of dl, you don't follow all 7 steps.

• How to read digital signals with pre-and post-trigger on a card PCI-6251

  I have 22-bit parallel position of data entering TTL lines to 16 kHz with a pulse of marker that says when the data is valid. I also have a fault line which gives an impulse when an error condition is met. I want to read in the 22 lines of position with 500 positions of pre-event and post-event 500 data when the fault line says. How do I pre and post-déclencher lines digital input on a card PCI-6251?

  If this is not possible on this map, which maps PCI would be possible?

  
  

• Sharing network and permissions - Windows 2012R2

  I am trying to implement the actions of network and could use help. My plan is to create the following directory structure:

  D:\Shares$

  In the D:\Shares$ directory would be:

  D:\Shares$\Users

  D:\Shares$\Departments

  D:\Shares$\Shared

  D:\Shares$\Temp

  The Users directory would be %nom % directory, each user having access explicit only on file here

  The directory of departments would hold technical, accounting, etc. and should be available for specific users

  The shared directories and Temp would be open to all users

  I don't want users to be able to access or view the contents of the other directories

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Pre and Post build screws

  When generating pre and post screws we have the possibility of running, is possible to get that build spec, they were launched since (that is if you have multiple versions of a project)? Also, is there a way to pull the output through nodes of property directory, or what I need to parse the XML project?

  I did a quick test with a selection of pre-designed programmes VI and the model that is already created by the build specification provides two points you requested by nature.  I'm just wired to the top of some indicators and forced the FP to show test, but I guess you could save in a file or put her in something else needed.

  

  

  It comes with LV 2013 (32 bit).

• [SOLVED] I need help for Shared Documents and Documents on my computer XP Home

  I need help with my shared Documents and other folders on my computer. I have an administrator account. My son has a limited access account.

  I clicked on the option 'make my private files and folders '.  His file was renamed to Documents now my shared Documents. It's just my account.

  I tried to undo what I did. I tried everything (I mean everything) has proposed to do online.

  First of all, I logged in Safemode administrator account. I went to the Documents folder, and I've added the Administrators group and click full control.

  Then I restored system a few weeks before. Then, I went to http://computers.douglasthrift.net/winxpfaq/#faq3_shared_documents and did everything.

  None of them worked. I did so much, that I don't remember.

  Then, I found that the registry key for the Shared Documents lacked in the MUi cache. @shell32.dll,-21785. I entered, but after I rebooted a few times, he disappeared. I have to hurt... In addition to this. Now I face a different problem. I don't know it is normal but when I login my account and click on

  My computer, I see Documents of my name and the name of my son in addition to Documents (Shared Documents).

  When I save a new file in the My Documents folder, it is automatically created in the folder of Documents of my name, too. I can't delete them because they are system folders. I crossed my registry keys in the MUI cache and discovered that 4 of them did not exist in other accounts.

  @shell32.dll,-21792; 21793; 21794; 21795 (%, etc. of music of % documents). I don't know if I can delete them or not.

  I'm not an expert in computers. I'm sorry that it is very long.  I hope someone can help me. Thank you.

  Hello

  I suggest you follow the troubleshooting steps and check if this solves the problem on your computer.

  Method:

  Ra SFC scan to search for the missing or corrupt files that can cause this problem.

  Of file system (CFS) when checking that all the Windows XP system files are intact and not altered, changed or damaged.

  a. Click Start, click programs, accessories, command prompt principally made.

  b. in the type in the following command prompt window and press ENTER:

  sfc/scannow

  If you are prompted to insert the Windows XP disc, load the disc of Windows XP on the CD drive on your computer.

  Once the scan finished restart your computer and test to see if the problem you are experiencing is resolved or not.

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  I hope this information helps. Please get back to us if you have any other questions on this subject.

• I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer.

  I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer. The computers are connected by a switch, fixed IP addresses that are correctly configured and point to a DNS server outside the network. When I try to open the icon for one of the computers, he asked for credentials. I try to type the user name for the computer that is sharing the resource and the password. It is the user account whose computer is loged on and belongs to the Administrators group. for example: user name (Computer1\username) password (password). It does not work. The Windows Firewall is disabled on all computers. It worked well there 2 days. I can't find anything wrong with the network settings. Does anyone have a solution? Thank you.

  If the portion of the machine has activated - Simple file sharing (i.e. it is XP Home or it is XP Pro with Simple (default) file sharing) - while all file sharing connections authenticate as user 'guest '.  It will not matter what username / password you provide, it will attempt to authenticate as 'guest '.  If the guest user has received a password or the guest account is not active, you will experience the symptoms you describe.

  If the serving machine running XP Pro and Simple file sharing is disabled, then you should be able to connect by specifying the user as computer\user and the password to connect.  To turn off Simple file sharing:

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  Also:
  "Description of the account in Windows XP"
    <>http://support.Microsoft.com/kb/300489 >

  HTH,
  JW

• 0X803C0107 error: you cannot access shared files and printers and the MSE does not start at startup

  Original title: mainly MSE does not start at startup. have you tried re-loading and other elements on the card, still no luck. Here is the error code I have and the information complete.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Error 0X803C0107

    Details of the editor for Windows Firewall troubleshooting

    Verified issues

    You cannot access shared files and PrintersYou cannot access shared files and printers

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445. Checked

    No workingRemote Assistance remote assistance does not

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance. Checked

    Windows Vista may not start Windows Vista FirewallWindows could not start the Windows Firewall

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned. Checked

    Windows Firewall service is not his firewall service is not started

    Windows Firewall service is not running or is not started. Checked

    Issues checked the details of the detection

    6 you cannot access shared files and printers checked

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445.

    Unlock the file and printer sharing in Windows Firewall works not

    To allow access to shared folders and printers, except for the file sharing and printers in the Windows Firewall must be enabled.

    6 remote assistance works not verified

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance.

    Allow Remote Assistance in Windows not running Firewall

    Which allows Assistance remotely as an exception in Windows Firewall it unlocks and corrects this problem.

    6 Windows Vista could not start Windows Firewall check

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned.

    Set permissions for the registry keys concerned not run

    Setting permissions for the registry keys concerned will solve this problem. Applies only to computers by using Group Policy to manage the firewall.

  6 Windows Firewall service did not start Checked

  Windows Firewall service is not running or is not started.

  Start the Windows Firewall service is not running

  Start the Windows Firewall service solves this problem.

  Details of detection

  Collection information

  Computer name: NORMBRESINSKI

  Windows Version: 5.1

  Architecture: x 86

  Time: 09-20-2010 07:51:49

  Publisher details

  Troubleshooting Windows Firewall

  Automatically fix problems of Windows Firewall, such as Windows cannot start the firewall service (0x5) Windows or Windows remote assistance does not work

  Package Version: 1.0

  Publisher: Microsoft Corporation

  You have problems with programs

• Error messages
• Recent changes to your computer
• What you have already tried to solve the problem

Hi Rickbsk,

You can check out the link and check the suggestions provided by scotty1294.

http://social.answers.Microsoft.com/forums/en-us/msestart/thread/05a63b12-1be9-4BD3-898e-64674c1e9afd

If you have not tried all the suggestions above, try and see if it helps.

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows XP can't see shared files and folders on the system Windows 7 Home Premium 64-bit

  I have a wireless home network. When I got Windows 7 Home premium 32-bit on my desk - my XP laptop was able to share files and folders.

  Today, I upgraded my computer to Windows 7 Home Premium 64-bit
  Now - my Windows 7 Desktop can access files on my XP laptop - BUT - I was no longer able to access to any shared files and folders on the Windows 7 desktop. I checked that matches the name of working group. And on the XP - when I go to the Add Assistant preferred network and make a Browse.When I select Microsoft Windows network and task force - I see my office listed. But when I try to select - the OK button remains grayed out.
  I would appreciate your help on this.

  Thanks for your help - but I just found out the problem. In the advanced sharing settings, I forgot to select Enable turn off password protected sharing. The second I chose no-all the files and folders that I set to share on the Windows 7 system became available.

  Thanks for your help, anyway.

• I'm having a problem sharing back and forth between xp and vista & get the error that I don't have permission to access files

  original title: sharing of Vista with XP

  I'm having a problem of sharing back and forth between xp and vista.  I've set up the sharing, but I still get the error message that I don't have permission to access files

  Kill / disable the Vista password protection option. If you have installed a separate firewall, configure it.

• Sharing Samba and Windows 7

  Hi friends,

  I have the ASUS RT-AC51U router and I created a Samba share on the hard drive connected to the USB port of this router.

  My current laptop running Windows 7 computer (and connected router to above) can see the share under 'Network' - I can also read/write in the files/folders when the guest connection is enabled for my part.

  Problem when I allow the connection of user/password for my part - My Windows 7 can still see Samba share and list of all the folders under 'network', but I am not able to open the files when I provide my username/password (Samba share user/pwd is different from my Windows user/pwd) in the dialog box

  I get the error is that I don't have permission to use this network resource

  I tried to enter my user/pwd following combinations and all these not don't work.

  (1) user-name/pwd

  (2) group work-user-name/pwd domain\username

  (3) router-ip\user-name/pwd

  Thank you in advance for reading and replying to this message.

  Nitin

  Hi Nitin,

  Thanks for posting your query in Microsoft Community.

  This problem may occur if the permission setting is incorrect. To resolve this issue, please see the following steps:

  First of all, if you have any firewall or antivirus program installed, please disable it:

  Step 1: Change the settings of working group:

  1. Please make sure that these machines are in the same workgroup:

  To change the settings of working group, please see the following steps:

  1. click the Start button, then right-click on computer in the right pane and select Properties.

  2. in the name of computer , the domain and workgroup of the window system settings section, click change settings.

  3. on the System Properties dialog box the computer name tab, click change.

  4. in the change of the name or the domain of computer dialog box, type the name of the working group used by the other computers on your network in Workgroup, and then click OK.

  If the problem persists, please refer to step 2:

  Step 2: Advanced sharing permission

  1. in Windows 7, right click on the shared folder and then click Properties.

  2. click on the tab share , click Advanced sharing. Check share this folder .

  3. click on the permissions button, click Add.

  4. highlight the account that you want to share this folder to (name of account that will have access to the file), and then check the box allow for total control.

  5. If the list is not the name of the account, please click on the Add button. Type everyone , and then click OK.

  6. click everyone in the list of users and check the allow full control check box in the "permissions for everyone" pane and click apply, click OK.

  Please see the article below that can give you complete instructions on connecting to another network and file sharing.

  View and connect to available wireless networks

   

  Share files with anyone

  File sharing essentials
  Sharing files using public folders
  

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• cannot depend on a file of discovery and sharing files and printing

  I know this has been posted before but I can't find the right answer, I tried all of the suggestions I've found.  I still can't file discovery and sharing files and printing to stay on, I use Norton firewall and I always turn off no luck.  Have you checked all the services which are expected to be running and that they have tried the suggestion to try it in safe mode still nothing did nothing a sfc/scannow.  I am using windows 7 pro 32 bit summer trying to figure this out for a week.  I'm trying to do not have to reinstall windows.

  Thanks for any help

  I know this has been posted before but I can't find the right answer, I tried all of the suggestions I've found.  I still can't file discovery and sharing files and printing to stay on, I use Norton firewall and I always turn off no luck.  Have you checked all the services which are expected to be running and that they have tried the suggestion to try it in safe mode still nothing did nothing a sfc/scannow.  I am using windows 7 pro 32 bit summer trying to figure this out for a week.  I'm trying to do not have to reinstall windows.

  Thanks for any help

  Already responded to check if this may correct your answer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-turn-on-my-network-discovery-and-file-and/9e766e4b-3eb0-475f-B680-6bd75fbd3d2a

• How to back up files that have been published in LR and PSE?

  I need help! I saved as I my I edited in LR and PSE and now I can't read on other computers. Can someone please help

  I did not use the organizer for many years... but I think it's what you do

  1. Select the photos you want by clicking on it (ctrl-click or shift-click to select multiple)
  2. Use the menu file-> export-> as a new file, select JPG in the dialog box that appears, and then select a folder you want to store all these JPGs and click OK

• Difference between consumption, Active, private, shared, exchanged and the compressed?

  Difference between

  Consumed, Active, private, shared, exchanged and the compressed?

  Hello

  I assume you mean memory?

  Consumed: Welcome the memory that is allocated to the VM

  Active: Comments memory that is used by the virtual machine

  Private: Amount of memory stored in the physical host for this virtual machine memory

  Shared: Amount of memory shared between several virtual machines with Transparent Page Sharing

  Swapped: Memory of the host traded to a file in the directory of the virtual machine to release the host memory

  Tablet: Memory that has been compressed by the VMkernel for free space

  Concerning

  Tim

• Palm Pre and Jawbone 2 pairing problems

  I just bought a Jawbone 2 for my pre and I can't get the phone to recognize even I have fitted with a bluetooth device, let alone connect to it for a given period.  I have the piece of ear a few inches away from the phone and it keeps saying no devices.  Why is this so frustrating, that everything has to be a problem so far with this phone? I'm just glad, they got the EAS SSL question worked, but I have to use bluetooth and I don't understand why it does not work.  Fix this Palm or someone please let me know what to do.  Thank you.

  I have a jaw 2 and have no problem that the pairing so that never.

  Look here for putting the jaw bone in twinning mod.

  http://Aliph.custhelp.com/cgi-bin/Aliph.cfg/php/enduser/std_adp.php?p_faqid=143

  then search bluetoothe with pre devices.

  If it has not yet come there is probably a hardware problem in the pre or the jaw.