Original driver or windows update driver?

Similar Questions

• Windows returns to original settings after Windows Update.

  Original title: when I try update windows with the update windows, it works.

  Does the update, then it restores the changes directly after.

  Hi The.doctor,

  1. you receive an error message?
  2 from when are you facing this problem?
  3. any recent change in software/hardware on your computer that has led to this question?

  Method 1:
   
  Check the history windows update to find any error code for updates failed. Make a right-click on the update failed, and then click view

  To do this:
  a. click on start
  b. type of line Windows Update search
  c. click on Windows Update
  d. Select view update history

  Method 2:
   
  To run the Windows Update Troubleshooter
   
  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Computer in a loop of continuous reboot after Windows update

  Original title: serious windows update conflicts with the software driver reinstallation

  I just did a clean reinstall of windows family basic on my dell vostro 1400 using the reinstallation cd (I don't have the driver cd).  Later, I was able to install the drivers using another computer to transfer driver software from the usb and a usb port on my laptop.  I got more than 100 different windows updates to be performed.  About 74 or 80 there were errors... unfortunately I do not have these error codes... but they were basically telling me to just install the updates at this point. I did so, restarted my computer and tried to install the rest. The process got as much as to restart my computer and would not get to the login page, but continued to restart over and over again.  I did a computer repair through the reinstallation cd who told me that he could not find any solution except to perform a restore of the system.  I did it, I tried the process with tent install updates 5 first (5 at the bottom of the list - they have been "recommended" and not 'important').  Anyway, tried and the same thing happened.  I'm guessing that I have is one of these updates, but in the log details of the computer repair, he said it may be related to hardware or software driver problems.  Any help?

  Hi Jonathan,.

  You are able to start the computer in safe mode?

  I suggest that allows you to view update history to see which update might be the cause of the problem.

  (a) open Windows Update by clicking Start , all programs, and then Windows Update.

  (b) in the left pane, click view update history.

  (c) to display more information about an update with the error message, double-click it.

  Once you know that Update KB number you can uninstall the update and then try to restart the computer and check if it helps.

  The problems with the removal of updates

  http://Windows.Microsoft.com/en-CA/Windows-Vista/troubleshoot-problems-with-removing-updates

  Method 1:

  You can also perform a startup repair and check.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-CA/Windows-Vista/startup-repair-frequently-asked-questions

  Method 2:

  I also suggest to go through the steps from the link provided and check.

  Repairs to the system of Windows recovery environment

  http://Windows.Microsoft.com/en-CA/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Hope this helps and let us know if you need more assistance.

• Get Windows Update, error: 80070490.

  Original title: Get Windows Update errors

  I have a Samsung NP350V5C-S09AU.

  I did a restore (full reset/factory setting) due to a previous issue in which I can not enter safe mode and start windows because of the failure in updating graphics driver (managed to do a complete reset via advanced startup).

  After the restoration of the system, I used SW Update to download the drivers first then checked and installed the windows updates. I ignored the prompt to reboot the PC SW update because I waited for the restart of the PC of Windows Update service prompt (that's what I before I did a restore and even managed to safely update to windows 8.1).

  After the reboot, it doesn't seem to be anything wrong (showed the usual for update and other progression). Then I reopened it SW Update again to search for any other driver updates, met a little a problem to update driver Bluetooth but has managed to install it successfully. However it does not appear to update to 2.0.0.7x 2.0.0.38 'settings', then I felt that I should just give 2.0.0.38 until I have install more updates to the window.

  Before you install any other updates, I checked windows update history and find facilities failed (error 80070490); I went and did a few things such as troubleshooting and SFC scans via admin cmd.

  Troubleshoot has trained and found "Windows Update components must be repaired" and "Find files missing or corrupted", both correction has been marked as fixed (auto-fix option). I ran out again to double check if it has been set, but even after several times, it shows the same results of these two issues have been found, but attaches.

  SFC scans by admin cmd has led, in a first step, "Windows Resource Protection found corrupt files and managed to repair their." Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log. ». I used troubleshoot and always found the same errors as above and ran Scan SFC, where this time it gave rise to ""Windows Resource Protection did not find any breach of integrity. "."

  How to deal with these issues because I intended to install the last update immediately and upgrade to windows 8.1 like last time. These questions/problem makes me doubt made more updates up to now since it's the first time I get / these errors/problems.

  Hello Ross,

  Thank you for the update.

  You can try to follow the following suggestions to solve the problem with Windows Update.

  Error code Windows Update '0 x 80070002' or '0 x 80070003 '.

  http://support.Microsoft.com/kb/910336/en-us

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• My Windows Update cannot check updates

  original title; My Windows Update application is BROKEN

  Automatic updates was, but all of a sudden the error message says "Windows can't check for updates.

  EACH MS page or a site that I visit that discusses the importance of updating and the possibility of providesan to update, going through me the same process - where the error message "Windows cannot check for updates!  It's the Groundhog Day!

  GS72,
  Try the following and post return:
  Clean boot your PC, and then run Windows Update.

  Perform operations of KB883825

  Run the System Update tool and then try to update.

  Run a disk error check , then the System File Checker , and note the results.  If they fix all errors and rerun updates.

  When displaying the results also include the history of your anti-virus program before MSE.  What program did you have before MSE, how have you removed had expired subscription?

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Windows updates 0 x 80070643

  original title: 000000_643 Windows update

  I have 2 problems...  First windows update: can not install an update. I get error code 00000_643.  Why?  and what can I do?

  Second prob. : I can not close to the down/restart my computer.  It stops at the last "image" - "Computer shuts down" the last time I gave her an hour before I disconnected the power. I tried to repair Windows with the disk installation, but without success...    (Home Basic to Windows Vista)    How to solve this?    -Sorry for my bad English!      Klaus

  I have 2 problems...  First windows update: can not install an update. I get error code 00000_643.  Why?  and what can I do?

  Second prob. : I can not close to the down/restart my computer.  It stops at the last "image" - "Computer shuts down" the last time I gave her an hour before I disconnected the power. I tried to repair Windows with the disk installation, but without success...    (Home Basic to Windows Vista)    How to solve this?    -Sorry for my bad English!      Klaus

  I can only will offer a link to a possible solution because of 643 updates... Click on the link below
  Error 80070643 Windows Updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643 For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• 2 updates repeatedly offered via Windows update

  Original title: latest Windows updates

  I have updates Windows automatically happening and for the past 5 days there are 2 updates to install and I'm sure they are the same 2 every night. It's as if the computer has entered a loop with these updates. Whenever I reboot then updates must be configured. Someone at - he of the clues as to what is happening.

  Hi Merlendd,

  Follow the steps listed in the knowledge base article mentioned below to solve the problem:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows Update KB973768 fails on Windows XP SP3 error 0x8007F0F4

  original title: KB973768 Windows Update does not work for Windows XP SP3 error 0x8007F0F4 - is there a data sheet on this problem?

  Several automatic updates Windows Update failed and continues to present KB973768 for installation.  Error message: 0x8007F0F4 is displayed on the Update Page.

  Hello

  first of all you can try this difficulty HE (reset WIndows update components):

  http://support.Microsoft.com/kb/971058

  Have you tried to download the update and install manually (the good language)?

  http://www.Microsoft.com/download/en/details.aspx?ID=74

  Here is a little bit information about error 0x8007F0F4:

  http://support.Microsoft.com/kb/958051/en

  LC

• Windows XP does not start after Windows updates

  Original title: recent Windows update for xp

  As a result a my computer Windows xp, last Tuesday, my computer is now inoperative.  He was fine before this, but cannot get it to turn on.

  When I tried again today, a message came up saying Microsoft to apologize for the inconvenience, but Windows did not start successfully.  A recent hardware or software change might have caused this.
  What should I do now?

  Grandmother,

  If the options above do not, I suggest you use the Recovery Console to try to fix your Windows XP

  Here's HOW - there images, so it is easier to follow. Read the section on how to use it.

  Once you are connected to the Recovery Console, type the following command and press ENTER:

  CHKDSK/p

  There is a space between 'k' and ' / '.

  This may take a few minutes and the command can fix registry issues possible that occurred. This is based on the experience that I have used this on an old XP machine and it showed a message after the recovery that looks like this

  See you soon ~!

• Windows Update repeatedly offers KB951847.

  Original title:

  Windows update says I need to down load KB951847x86 when I check the update he say he has zero bits I hide but it's come back whenever my computer is started.

  I have service pack 3 installed, all security updates are installed. I hide this update in windows update, always whenever I start computer it comes back. I've removed the download folder, I deselected Kb951847 and hide. I restarted and then automatic updates and it always comes back. I read were is not a major or necessary update. I read were can I get a newer version already installed. When I opened the update it says it is ready to download, but has bits 0, then: installation failure.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Run the fixit in aggressive mode from the following link and check:
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  . Net framework uninstall and reinstall.

  Step 1:

  Download dotnetfx_cleanup_tool.zip from the following site:

  http://blogs.msdn.com/CFS-file.ashx/__key/CommunityServer-components-PostAttachments/00-08-90-44-93/dotnetfx_5F00_cleanup_5F00_tool.zip

  Step 2:

  When you are prompted, click Open, and then click retrieve now.

  Step 3:
  In which you extracted the files, double-click cleanup_tool.exe. If you are prompted for an administrator password or a confirmation, provide the password and then click on continue.

  Step 4:
  In the Do you want to run the .NET Framework Setup Cleanup Utility? Message, click Yes.

  This tool may be in English only, but it also works for other language versions of Windows.
   Step 5:
  Click Yes to accept the license agreement.

  Step 6:
  In the window cleaning product, click on the dropdown menu, select remove all versions of .NET Frameworkand then click clean up now.

  Note:

  The cleaning tool does not remove the .NET Framework 2.0 in Windows Vista or later versions of Windows because the .NET Framework is installed as a component of the operating system.
  Step 7:
  After having removed the .NET Framework, redemarrer the computer

  Download and install Net Framework 3.5 SP1 (this will also install the .NET Framework 2.0 SP2 and the .NET Framework 3.0 SP2)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=25150

  Step 8:
  Restart the computer.

  Step 9:
  Download and install Microsoft Net Framework 4 Client Profile .NET

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24872
  Step 10:
  Restart computer

  Step 11:
  Return to Windows Update and then search for and install updates.

  Let us know if it helps!

• Windows Update 'windows genuine advantage' is a real update

  original title: is windows update 'windows genuine advantage' a real update, cause I just reinstalled XP because of the digitization program of the same name kept on the screen?

  This update is currently with the icon in my taskbar pending I'm not sure it's a real update. can I refuse some updates and still receive others? Thank you

  Yes, it is real.

  Yes, you can refuse certain updates - using the custom install either from automatic updates (by clicking on the system tray icon) or Windows updates (which will require a validation of the system)

• Components Windows Update are configured incorrectly

  original title: repair Windows Update componet

  Unable to get the Windows Update. One or more components of Windows Update are configured incorrestly. What can I do to fix this?

  See if this article helps you:

  "How to reset the Windows Update components?"
    <>http://support.Microsoft.com/kb/971058 >

  HTH,
  JW

• How to: Determine Windows updates were installed

  Original title : Scan windows update

  I'm running Winxp and I was wondering if there was a file that contains all my previous windows updates that have gone on the computer?

  If not, how does he know windows update updates, I still need and that i don't?

  If you want to know what's installed or missing: -.

  Microsoft - Microsoft Baseline Security Analyzer.

  http://TechNet.Microsoft.com/en-AU/security/cc184924.aspx>

  UTC/GMT is 13:55 Friday, February 10, 2012

• Windows Update indicates that there are no more updates when there is a lot more updates needed to be updated

  I recently restored my Vista PC for copy of factory and re-applied Windows updates. I can not connect to wireless internet and discovered that it's thanks to put corrupt up-to-date Windows.  I have 1 installed SP and Windows Update says there is no more updates to be applied.  But I want to get SP 2 applies, so I can move to Internet Explorer 9.  How can I continue with the rest of the Windows updates?  Do I just have the SP 2 from the Windows Update Catalog directly?  Will there be other necessary updates before the Vista SP2?   Before this Windows Update repeatedly appy SP 1 even want me it was properly installed.  I had to hide this update SP 1 to pass.

  Two copies:
  Windows Vista update problem, continue, after running sfc, the paper shows the corruption of the file system

  I'm new to this community and accidentally marked this problem have responded. The truth is that it is not. I'm sorry that I have to create a new question. The original question is: ' Windows Update indicates that this PC is up-to-date, but actually much more KB (including SP2) had to be installed "."

  Hi Nathalie,.

  I followed your instructions and made the file (sfc scan) system in the method. The result is

  Windows resource protection found corrupt files but was unable to solve some of them. I select all the records of SR in the cbs.log newspaper and place the records in a text file. There are several check and 0 repair but it did not specify any file name. Now I don't know how to continue. This is not what I expected. I ran Checksur.exe, which was very good.

  How can I know what system files are corrupt and do the repair? Thank you.

  Hello

  What is the size of the Service pack 1 installed on the computer in the history of Windows?

  I suggest you perform the clean boot, download and install Windows Vista service pack 1 from the following link:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Download link: Windows Vista Service Pack 1 five language standalone (KB936330)
  http://www.Microsoft.com/en-in/Download/details.aspx?ID=30

  We answer with the result once you try the steps above.

• Unable to turn on windows update

  Original title: Virus WINDOWS UPDATE and REGISTRY FIX

  I noticed the other day that my computer, Windows Update will not turn back, regardless of what I do? After trying several times, several things, I was told it was a virus, specifically a virus of registry. I'm trying to find a way to repair my registry. What is the best program I should use? I tried several programs of 'free' so-called but am exhausted to the uncertainty of all of these programs. They find problems 800-1000 and then deliver the punchline... to pay me and we'll fix them.  First of all, I have to pay? and if I have to pay... which one is that I have to pay?

  If you replaced the HARD disk "earlier this year", you would have to do a clean install of Windows as well as MSE , but you said you don't do that. The fact that MSE has been installed on 21 April 2011 (to not not 'this year') confirms that you don't.

  That being said, can you restore an Image instead of doing one installs clean.

  However, my previous post is still standing.

  REPOST: Chances are you see the effects of an ongoing "hijackware' infection, perhaps aggravated by a rootkit infection!

  Based on your responses to this subject, there are 2 two possible explanations for this situation: (a) your misguided use of registry cleaners and/or (b) does not completely remove the Norton software before installing MSE on April 21, 2011.

  In fact, chances are the computer is already infected when you installed MSE because none of these other updates are installed (which were released before installing MSE).

• Windows update fails to install KB2656368 and KB2686827. Get the code641 error

  Original title:

  Windows update fails to install KB2656368 and KB2686827

  I am running Vista Home Premium.  Windows update fails to install KB2656368 and KB2686827.  Download error code641 which seems to mean that Windows cannot identify the problem.  In the past, it was caused because the installer has been damaged.  In setting the Microsoft Support took control of my computer; Download a new installer and solved the problem.  However, it seems that there is no way of contacting Microsoft Support for them to fix the installation program.  The installation program be fixed right now.  Moreover, the tool "Fixit" said that everything is fine.

  Microsoft paid $99 for the support.  Tech uploaded a new installer.  Problem solved!

  Still wondering why the question about System Mechanic?