Originating IP address is not retained when you deploy a vApp

Similar Questions

• Static drive letters are not retained when you restart

  I assign drive letters static for two CD-ROM drives on my system - v and w:

  Whenever the system is restarted, it 'forgets' static CD-ROM drive letters and assigns its own, which means an external HARD drive gets the wrong letter of drive and screw to the top of my backup arrangements.

  It started in the last few weeks, although I'm not sure what I did to make it.  The system is Windows XP Home SP3, kept up to date, including the last batch of August 2010 patches.

  I had a Windows startup internal defective HARD drive about a month ago, I replaced after the cloning of one defective on the new drive.

  Change drive letter must be done in diskmgmt.msc in msc, L.click

  on a disc, go to actions, all, select 'Change the letter of the drive/path', change the letter...

  However, don't forget that xp by default uses "D" as his letter for any installation cdrom.

  V & W for the cdrom will cease installation & other problems. The change of

  that must be done in REGEDIT... HKEY/LOCAL/MACHINE/software/microsoft/windows /.

  Then, open Configuration & change letter as needed...

• Attempt to test remote multi-VM - error: "the purpose or intended sending is not found" when you deploy the VM

  Hello

  I place the "Layout" section in the ViewPlanner UI correctly according to the user's guide and when I try the provision, I see the following errors in viewplanner.log.

  Please help me with this.  Commissioning is not intervene - although all the settings I've specified are correct and resources such as data store are up and running, and 100% exist.

  2013-11-19 02:56:12, DEBUG 650 commissioning the virtual machines using VC clonings with parameters: {u 'maxvmperhost': u '1', u 'parentvmpath': u'[ECO6-datastore] Win7_sky1_clone_eco6_3 / Win7_sky1_clone_eco6_3.vmx ', u' parentvm': u 'GoldenDesktop', u 'vmprefix': u 'VinodVM', u 'confType': u '0', u 'numofvms': u '1', 'clonetype' u: u '0', u 'reslist': u 'stlrx300s7 - 150.stl.netapp.com', u 'datastore': u 'ECO6-datastore', u 'customspec': u 'sysprep.exe'}

  2013-11-19 02:56:12, 651 DEBUG key: VCserver, value: Skytrain-VC - 02.stl.netapp.com

  2013-11-19 02:56:12, 651 DEBUG key: data center, value: aérotrain 02

  2013-11-19 02:56:12, 651 DEBUG key: VCuser, value: root

  2013-11-19 02:56:12, 651 DEBUG key: VCpasswd, value: ENDZIV

  2013-11-19 02:56:12, 651 INFO get all hosts in VC

  2013-11-19 02:56:12, 687 INFO get all VC data centers

  2013-11-19 02:56:12, 701 INFO get all the resources calculation of VC

  2013-11-19 02:56:12, 728 computing INFO Got from VC resources: {' Skytrain-02': ' vim. "} {ClusterComputeResource:domain - c7 ',' stlrx300s7 - 150.stl.netapp.com': ' vim.ComputeResource:domain - s81'}

  2013-11-19 02:56:12, 729 INFO get all VC clusters

  2013-11-19 02:56:12, 757 DEBUGGING from the thread of provisioning

  2013-11-19 02:56:12, 757 DEBUG key: VCserver, value: Skytrain-VC - 02.stl.netapp.com

  2013-11-19 02:56:12, 758 DEBUG key: data center, value: aérotrain 02

  2013-11-19 02:56:12, 758 DEBUG key: VCuser, value: root

  2013-11-19 02:56:12, 759 DEBUG key: VCpasswd, value: ENDZIV

  2013-11-19 02:56:12, 759 INFO get all hosts in VC

  2013-11-19 02:56:12, 760 INFO back to the State of commissioning: 1000

  2013-11-19 02:56:12, 795 INFO get all VC data centers

  2013-11-19 02:56:12, 812 INFO get all the resources calculation of VC

  2013-11-19 02:56:12, 836 computing INFO Got from VC resources: {' Skytrain-02': ' vim. "} {ClusterComputeResource:domain - c7 ',' stlrx300s7 - 150.stl.netapp.com': ' vim.ComputeResource:domain - s81'}

  2013-11-19 02:56:12, 836 INFO get all VC clusters

  2013-11-19 02:56:13, 031 DEBUG Listehotes prepared for commissioning: [u 'stlrx300s7 - 150.stl.netapp.com']

  2013-11-19 02:56:13, 032 DEBUG, get the host name in the hosts with index lists: 0

  2013-11-19 02:56:13, 032 DEBUG returns the host name: stlrx300s7 - 150.stl.netapp.com

  2013-11-19 02:56:13, 196 INFO uttering 1 complete clones with the VinodVM prefix in the ECO6-datastore data store

  2013-11-19 02:56:13, clone command 196 DEBUG call to create the new clone in storage data ECO6-store: VinodVM1

  Exception in thread Thread-3:

  Traceback (most recent call changed):

  File "/ usr/lib/python2.6/threading.py", line 532, in __bootstrap_inner

  Self.Run)

  File "/ build/mts/release/bora-1229598/performance/viewplanner/Harness/root/view_interface.py", line 67, in the term

  File "/ build/mts/release/bora-1229598/performance/viewplanner/Harness/root/vc_interface.py", line 366, in provisionVMsWithVC

  File "/ build/mts/release/bora-1229598/performance/viewplanner/Harness/root/vc_interface.py", line 993, in makeFullClonesInHost

  File "/ build/mts/release/bora-1229598/performance/viewplanner/Harness/root/vc_interface.py", line 723, makeOneClone

  File "/ build/mts/release/bora-1229598/performance/viewplanner/Harness/root/vc_interface.py", line 649, in getCustomizationSpec

  File "/ build/mts/release/bora-1229598/performance/viewplanner/Harness/root/pyVmomi/VmomiSupport.py", line 515, < lambda >

  File "/ build/mts/release/bora-1229598/performance/viewplanner/Harness/root/pyVmomi/VmomiSupport.py", line 324, _InvokeMethod

  File "/ build/mts/release/bora-1229598/performance/viewplanner/Harness/root/pyVmomi/SoapAdapter.py", line 1159 in InvokeMethod

  vim.fault.NotFound: (vim.fault.NotFound) {}

  dynamicType = < unset >

  dynamicProperty = (vmodl. DynamicProperty) [].

  MSG = ' the purpose or intended sending is not found.',

  faultCause = < unset >

  faultMessage = (vmodl. [LocalizableMessage])

  }

  The harness did not find the spec of customization with this name, from where the error. Please follow the guide of the user create a customization specification in the CR.

• AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  Original title: computer disc drive

  Download or CD extract of music reading, record music, download CD etc... Before my hard drive had to be replaced, when a disc is inserted into my computer, a window appears, asking what you want to do... Burn music, Rip, copy in folder etc... now when I insert a disk, the window no longer appears, which gives you options and you get to this site... How can I get that back?

  Hey Big-Mack,

  Try the steps of troubleshooting mentioned in the following article and check the result.
  See the enforcement function automatic or AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  If the problem persists, run the Autoplay Repair Wizard and check the result.
  See Autoplay Repair Wizard

  Play functionality; New in Windows Media Player 12 makes it easy to listen to the music, video and photos from your computer to other computers, TVs or stereo on your home network.
  For more information, see play in

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message

  Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message. I t comes up with unicode UTF-8

  It print a page of test very well and also printed from Notepad and word fine

  Scott

  Hi Scott,.

  (1) if it works well before?

  (2) remember to make changes to the computer before this problem?

  (3) what is the complete error message you receive?

  Method1: The computer in the boot and a test to see if you can print

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can post your query on the Windows Live Forums for more expert help

  Windows Live Forum -http://windowslivehelp.com/

  Thanks and greetings

  Ajay K
  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• C drive is not visible when you try to defragment

  Original title: errors of Volume disk, drive C is not visible when you try to defragment drive C in the maintenance of the system

  I tried to do a regular defrag of my C drive and received a message that there is Volume disk errors. The utility asked to reboot the system and clean the C drive. But when I access the defragment utility, drive C is not present there to use the application... suggestions?

  Hi Dante62,

  I suggest trying these steps provided below and check if the problem is resolved.

  Step 1:

  a. right click on the c drive.
  b. Select Properties.
  (c) under the Tools tab.
  d. Select Defragment now under defragmentation.

  Step 2:

  Try the SFC scan on the computer.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Check the link for more information on CFS below mentioned scan.

  http://support.Microsoft.com/kb/929833

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Letters do not appear when you type on a web browser

  I have no problem typing in MS Word 2007, but when it comes to the internet, typing in a web browser, there not all letters as I type. A slow response to the keyboard.

  Hello

  Thanks for posting your query on the Microsoft Communities

  I understand that some of the letters does not appear when you try to type on the web browser. Let me try and help you with the problem.

  1. what web browser do you use?

  2. have you tested the issue on several web browsers (if you have them)?

  3. have you started facing this problem recently? If Yes, are you aware or made a software or a hardware changes to the PC before this problem?

  This occurs generally if there is a problem with an add-on installed on the computer.

  I suggest to follow these methods on Internet Explorer and check to see if it helps to solve the problem:

  Method 1:

  You can start by running the Fixit and check if this helps solve the problem.

  Troubleshoot Internet Explorer to IE quick, safe and stable

  http://Support2.Microsoft.com/mats/ie_performance_and_safety

  
  

  Method 2:

  If this does not help, start Internet Explorer in no add-on mode.

  While Add-ons can enhance your online experience, they can sometimes interfere or conflict with other software on your computer. Try to start Internet Explorer without Add-ons to see if the problem goes away.

  Step 1: Run Internet Explorer without modules

  ·         Click the Start button. Click on all programs, Accessories, click System Toolsand then click Internet Explorer (No Add-ons).

  If the problem does not occur after you use this method, use Manage Add-ons to determine which modules are at the origin of the problem.

  Step 2: Manage Add-ons.

  (a) open Internet Explorer, click the Start button. In the search box, and then type Internet Explorerin the list of results, click on Internet Explorer.

  (b) click the Tools button, and then click Manage Add-ons.

  (c) click an add-on in the name list, and then click disable.

  (d) repeat step c until you identify the add-on that is causing the problem.

  See the article: http://windows.microsoft.com/en-us/windows7/Internet-Explorer-add-ons-frequently-asked-questions

  Let us know if it helps. If the problem persists, we will be happy to help you.

• Get a Bluetooth device message"driver is not found when you connect Bluetooth

  original title: Bluetooth connectivity problems

  Hello

  I own both a T-900 of Fujitsu (64-bit Windows 7) and a HTC Rezound and have been using bluetooth to transfer files between them until a few days ago. Out of nowhere, bluetooth does not work anymore and now shows that "Bluetooth device" driver is not found. I tried to uninstall and reinstall it from many different sites, try different, but for some reason bluetooth packages some do not fix the problem of Bluetooth device. My computer can not find other bluetooth devices, and my phone does not recognize my computer as a bluetooth, even with the two device are detectable. If someone had a similar problem or knows how to fix Bluetooth device? Any help is greatly appreciated!

  Hi autumnv92,

  Were there any changes made to the computer before the question?
   
  Check out the following and check:
  Method 1:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2:
  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device
  http://support.Microsoft.com/kb/2654568

   
  Method 3:
  See the following steps:
  1. turn on your bluetooth device
  2. right-click the icon for the device in the system status bar
  3. choose / click on "show bluetooth devices.
  4. There will be a list of devices you never associate (like your phone, another laptop, etc.).
  5. simply remove from the list.
  And the warning like "(pilote de périphérique Bluetooth périphérique est introuvable) will not show up again."
   
  Method 4:
  Bluetooth devices do not work correctly on a computer that is running Windows 7

  http://support.Microsoft.com/kb/980396

  
   
  Also check these links for more information:
    
  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

   
  Hope this information helps.

• Under TOOLS/Account Settings / your name / what I chose for "your name" is not displayed when you send an email. What should do? Thanks, paul

  Question: Under TOOLS/Account Settings / your name / what I chose for "your name" is not displayed when you send an email. What should do? Thank you! Paul

  This looks like a problem with your email service, not with Firefox (or Thunderbird).

  It is possible that you need to set the name sent by logging into your webmail account online (e.g., Yahoo! Mail or Gmail). Web e-mail providers like these often put sending appoint themselves, ignoring the settings of your email client.

  Unfortunately, since it is not a matter of Firefox you're unlikely to get help on these forums. I suggest that you find the support site for your e-mail provider, as they should be much more useful.

• In number. How do I lock you in a function such as highlighting a cell so it does not disappear when you move to another cell.

  In number. How can I lock you in a function such as highlighting a cell so that it does not disappear when you move to another cell.

  Hi Philil,

  Do you mean pointing out the contents of a cell, or "stressing" the cell itself (by placing an on bottom border)?

  Formatting content will transfer to another cell if you fill in the other cell content, or copy from a single cell and pasting it into another.

  Borders applied to a cell or group of cells may be applied to another cell or group of cells by selecting the first cell (single click), the format of this cell or a group of cells copy (Format (menu) or option + command + C > copy Style), and then selecting one or more other cells and stick to the format (Format (menu) or command-option-v > paste Style.)

  'Format' in the case of cells includes the color fill, color text and other text attributes, content, format (text, number, date & time, duration...), borders...

  When you copy the style, all format attributes are copied.

  Kind regards

  Barry

• Cannot access Firefox sync. My email address is not accepted when I try to set up a new account or enter an account that I may have. Frustrating, because I need to move my favorites to a new computer. Thanks in advance.

  Cannot access Firefox sync. My email address is not accepted when I try to set up a new account or enter an account that I may have. Frustrating, because I need to move my favorites to a new computer. Thanks in advance.

  Ignore this message until all characters for your e-mail address are typed on the input field.

• Why always, I received management is not available when you use maps for the iPhone 6 and I live in the Qatar?

  Why I always get direction is not available when you use maps for the iPhone 6 more?

  Currently I live in the Qatar.

  Hi Alison, Sameh

  The reason why you see directions is not available, it's that for cards of Apple, turn-by-turn directions is not a feature that is available in the Qatar. You can search for places and satellite imagery
  Take a look at the link below for more details on what features are available in the Qatar.

  iOS 9 feature availability
  http://www.Apple.com/iOS/feature-availability/

  Nice day

• Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

  Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
  Keyboard is fine.  Is this a compatibility issue?

  ---------------

• Acer toggle display does not display when you use the Fn + F5 key secret on my Acer Aspire 5560

  What it does:

  When you use the Fn + F5 key combination on my Acer Aspire 5560, it brings up a screen changes on the laptop screen for the selection of an external monitor, I am currently using Windows 7 Ulitmate

  Before the problem:

  Display mode switch Acer existed prior to the upgrades of the drivers

  The problem:

  The toggle screen Acer does not display when you use the Fn + F5 key secret on my Acer Aspire 5560?

  Additon Information needed to solve the problem or any other information:

  I would like to know what driver or software operates the Acer toggle display Mode?

  Also where can I find this driver for computer: Acer Aspire 5560 to bring this Acer toggle display Mode function?

  Acer Toggle display Mode: this is a picture of it when you use the Fn + F5 combination:

  

  Thank you very much Ironfly Ace, it has worked Acer hero of the day

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele