ORS XML 7.0 report output defaults to RTF format

Similar Questions

• How to set the date output Excel in RTF format

  Hello
  
  I have a report and I have a date named as period column. And I need this field as this MAY-11 output.
  
  So I used this tag <? format-date: CREATION_DATE; "MON - YY'? > when I ran and see the results in rtf his works very well and the exit is on MAY 11, but when I see the result in Excel format its does not display correctly. It shows as 11-MAY '.
  
  Can someone tell me if this is a format problem or a problem with excel.
  
  Thanks and greetings
  Srikkanth

  You can add two spaces at the end to prevent excellent formatting, so that it treats the field as a text.

• DAQ digital output default to low Earth

  Hello

  This probably a basic question, but I have found information on this subject.

  When I connect a data acquisition unit (usb6009) to the USB port I get any output defaults to a high (+ 5V) until I run my program and I put them to lower ground.

  Is it possible to configure default data acquisition always at 0V?

  I enjoy any comments or links on how to change this.

  Thank you

  Cristian

  The default value for the 6009, is that they are all set for entries. What you see is the pull up. But, no, you cannot set the power of the State to the 6009.

• output to the Excel Format report

  Hello

  I have a form to collect data... now I'm trying to create a report in excel format... something like this:

  

  is there a tutorial on how to create report output in excel by APEX? If this is not the case, can you please tell how to approach it.

  Thank you

  Hi tparvaiz

  The following demo is for the plugin mentioned by Scott

  GPV Interactive report to Excel

  Do not forget that the plugin creates custom exit Excel

  Concerning

  Mahmoud

• Apex 5 - save the report by default IR number

  Hello

  I face a problem with Apex 5.0 because all end-users can now edit and save the main report by default.

  In version 4.x, the rule was different: only developers can change primary report.

  Is there a way to put this rule in Apex 5.0 running?

  

  Thank you

  Sergio

  Hi Sergio,

  If you start an application with the manufacturer APEX you always act as developer, independent on the credentials of the account you are actually using to connect to your application. The reason being that you can also use LDAP or SSO for authentication. In this case APEX don't even know that you are a developer or an end user, because there is no associated user accounts APEX tables. That's why it all started from the generator must be a developer.

  Concerning

  Patrick

• Design report Oracle in the .rtf file...

  Is MS Word 2010 supports design .rtf fie (for Oracle Apps reports)? If yes how to design it is, creating a field?
  
  I developed a relationship with tool of reporting of Oracle 10 g. I record in Oracle Apps (R12), output PDF Format.
  It runs properly but in PDF file, the data is translated in some symbols. How to get the appropriate data in the PDF file.

  Hello

  First you must install BI Publisher in your machine so that u get a new add-in in MS Word for the generation of reports using RTFs created by MS Word.

  Once you install the BI Publisher in your machine, its pretty simple.

  Follow these steps:

  1. create data models only for your reports and triggers except the layout of the document.
  2. save the conc prog in Oracle Apps and give the type of output in xml format
  3 Add a new XML Publisher administrator responsibility to your responsibilities and the definition of the data model Create and in the definition of data code place your abbreviated name of conc prog and give the type of output in PDF or require the output type u.
  4. open MS Word and design your page layout using tables of the insert.
  5. save the word in .rtf format document.
  6 Download this document in the section of the template in RTF format in the RESP to the administrator of the XML Publisher
  7 query conc.

  P.S. learn more on this blogs and oracle documentation and be careful with xml tags.

  Oracle RDF (A) - gives xml - Conc Prog (B) tags - xml gives the tags RDF for XML - model Publisher (C)---> gives the output :)

  If A = B
  B = C
  which implies that A = C

  Happy learning! :)

  Thank you
  AFA

• Need help with the output of the query formatting

  Hello

  Here are the scripts to create the table and create test data:

  create table result (acct number(10), acct_nm varchar2(100), stage varchar2(10), target_pc number(10,2), long_target_pc number(10,2))
  /
  Insert into RESULT
     (ACCT, ACCT_NM, STAGE, TARGET_PC, LONG_TARGET_PC)
  Values
     (47042, 'Dora the explorer', 'AFTER', 33.6, 48)
  /  
  Insert into RESULT
     (ACCT, ACCT_NM, STAGE, TARGET_PC, LONG_TARGET_PC)
  Values
     (47042, 'Dora the explorer', 'BEFORE', 33.6, 48)
  /  
  Insert into RESULT
     (ACCT, ACCT_NM, STAGE, TARGET_PC, LONG_TARGET_PC)
  Values
     (41142, 'Bob the Builder', 'AFTER', 9.18, 20.4)
  /  
  Insert into RESULT
     (ACCT, ACCT_NM, STAGE, TARGET_PC, LONG_TARGET_PC)
  Values
     (41142, 'Bob the Builder', 'BEFORE', 9.18, 20.4)
  /  
  Insert into RESULT
     (ACCT, ACCT_NM, STAGE, TARGET_PC, LONG_TARGET_PC)
  Values
     (41086, 'Sofia the first', 'AFTER', 17.96, 51.3)
  /  
  Insert into RESULT
     (ACCT, ACCT_NM, STAGE, TARGET_PC, LONG_TARGET_PC)
  Values
     (41086, 'Sofia the first', 'BEFORE', 2.98, 8.5)
  /  
  Insert into RESULT
     (ACCT, ACCT_NM, STAGE, TARGET_PC, LONG_TARGET_PC)
  Values
     (41086, 'Sofia the first', 'BEFORE', 14.98, 42.8)
  /  
  COMMIT
  /
  
  

  I need output in the following format when I query this table:

  Account         Account Name        Stage       Target PC       Long Target PC
  41086           Sofia the first   
                                     BEFORE            2.98                  8.5
                                                      14.98                 42.8
                                     AFTER            17.96                 51.3
  41142           Bob the Builder                                                     
                                     BEFORE            9.18                 20.4
                                     AFTER             9.18                 20.4
  47042           Dora the explorer                                                     
                                     BEFORE           33.6                  48.0
                                     AFTER            33.6                  48.0
     
  Total Accounts = 3
  
  
  

  Here is what I tried but it does not gives me out I want (below referred to as the code):

  spool c:\break_test.txt
  column acct format 9999999999
  column acct_nm format a50
  column stage format a15
  column target_pc format 999.99
  column long_target_pc format 999.99
  break on acct, acct_nm, stage
  select * from result order by acct, stage desc
  
  
  

        41086 Sofia the first                                    BEFORE              2.98           8.50
        41086 Sofia the first                                    BEFORE             14.98          42.80
        41086 Sofia the first                                    AFTER              17.96          51.30
        41142 Bob the Builder                                    BEFORE              9.18          20.40
        41142 Bob the Builder                                    AFTER               9.18          20.40
        47042 Dora the explorer                                  BEFORE             33.60          48.00
        47042 Dora the explorer                                  AFTER              33.60          48.00
  
  

  Please tell us how to get there.

  Thanks in advance!

  Go back and check the syntax of the PAUSE command.

  SQL> column long_target_pc format 999.99
  SQL> break on acct, acct_nm, stage
  SP2-0158: unknown BREAK option "acct_nm,"
  

  The syntax must be

  sql> break on acct on acct_nm on stage
  

  SQL formatting * more reports

• Problem with the thrust of the report the conversion to RTF

  Hello Exparts,
  
  My version of report is

  Report Builder 6.0.8.11.3
  ORACLE Server Release 8.0.6.0.0

  I did a report, whose orientation is landscape. I put the landscape layout. Of report Navigator > > layout > > main Section, I set the orientation to landscape and the weight and size of paper.
  
  The report shows correct, print correctly but when I generate RTF report runtime format, it generates in the RTF format.
  
  Problem is when I open the report with Microsoft Office Word, it shows as so right Portrait of the report to cut.
  
  You people to know and have any solution to open it because it is like the view of the report?
  
  
  Thanks in advance...

  Specify the orientation system setting. This is a priority on the Orientation property and the Width and Height properties. To specify the ORIENTATION of the system parameter, which allows end users to change orientation during execution:

  Choose Tools > parameter Form Builder to display the parameter Form Builder.

  Click the orientation system setting.

  Click OK to display the paper setting.

  Double-click the value of Orientation (PF_ORIENTATION) field to display the property inspector.

  Under the settings node, set the property of the initial value of Portrait or landscape.

  Click on the run button paper, layout on the toolbar.

  In the Orientation list, change the orientation If you wish.

  Set the Orientation property and/or the Width and Height properties:

  In the navigation of the object under the document node set page, double-click the icon of properties for the relevant report (header, Main, or trailer) section to view the property inspector (by default, a report is defined in Section hand).

  In the Inspector properties, under the Section node, set the Orientation property to the desired value. If the value is Portrait or landscape, this value takes precedence over the Width and Height properties. If the default orientation is based on the values of the Width and Height properties (orientation landscape if the width is greater than height and orientation portrait if the height is greater than width).

  Hope this helps

• BI in 12 is no longer default blank model format in pdf format

  Model formats fore left empty in 11i used by default in PDF format. In version 12, this is not the case. Tested internally and it default to EXCEL with the execution one request competing bi. Is there a way to make blank default formats to PDF?

  Try to set the ' FND: default Template output Type ' profile for 'PDF' option.»

• Symantec reports its status in a format Windows is no longer supported. Why?

  Symantec reports its status in a format Windows is no longer supported.  This used to work properly.  This caused a Vista upgrade?

  http://www.Symantec.com/support/index.jsp

  Problem with Norton, contact their support at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Output in a Table format

  Hello
  
  In PL/SQL, I'll have a requirement to send a mail.
  
  This mail contains the message in a tabular format.
  
  How to have output in a table format.
  
  Please help me.
  

• XML editor of Page OFA report output

  Hello
  
  I created a button on a page of the OFA and called the report XML editor program when this button is clicked. Competing demand ran when check from display requests. When I click on viewout, the pdf document opened with the option, open, save, cancel. But it is not coming in the OFA page. When debugging the code, the url is null.
  
  Please see the code below.
  
  OADBTransactionImpl oadbtransactionimpl = (OADBTransactionImpl) paramOAPageContext.getRootApplicationModule () .getOADBTransaction ();
  String s1 = oadbtransactionimpl.getAppsContext () .getEnvStore () .getEnv ("TWO_TASK");
  System.out.println ("s1 =" + s1);
  String s2 = oadbtransactionimpl.getAppsContext () .getEnvStore () .getEnv ("GWYUID");
  System.out.println ("s2 =" + s2);
  String s3 = "START: 1: = fnd_webfile.get_url (fnd_webfile.request_out,: 2: 3: 4, 2); end; « ;
  CallableStatement callablestatement = paramOAPageContext.getApplicationModule (paramOAWebBean) .getOADBTransaction () .createCallableStatement (s3, 1);
  System.out.println ("s3 =" + s3);
  If (requestId! = 0)
  {
  Try
  {
  Number = new Number (requestId);
  callablestatement.registerOutParameter (1: 12);
  callablestatement.setInt (2, number.intValue ());
  callablestatement.setString (3, s2);
  callablestatement.setString (4, s1);
  CallableStatement.Execute ();
  String s4 = callablestatement.getString (1);
  
  System.out.println ("before S4 if statement");
  
  If (s4 == null: s4.equals(""))
  throw new RuntimeException();
  System.out.println ("URL is null");
  System.out.println ("print ouput url-" + s4);
  throw OAException.wrapperException (exception);
  oadbtransactionimpl.putValue ("OutputURL", s4);
  System.out.println ("print ouput url-" + s4);
  }

  Look at the links given by AJ.

  Basically what you will do is create a data definition and to assign a data model. Create a template (text) and assign it to your definition of data. You will use the XML editor Java API classes to pass parameters to your data model and extract the XML data. Then you will use this in conjunction with your document and the region of integration OFA model to present the final result to the user.

  All these things are in the documentation of the XML editor and the Javadocs.

• How do I configure DBXML to not output default encoding in the XML tag.

  Basically,.
  
  I put in documents such as
  <? XML version = "1.0? >
  < a / >
  
  and then querying for them.
  Currently I use the NodeContainer type.
  
  When I get the return document, DBXML appears automatically
  return the document
  <? XML version = "1.0" encoding = "UTF-8"? >
  < a / >
  
  is there a way to have him out not the encoding attribute?
  with NodeContainer.
  I have not tried it with WholedocContainer again.
  Note: I'm under Berkeley dbxml 2.5.13
  with PHP

  Wholedoc container will help you with that. If you want to keep the content of the document as it was in the case of a container of NodeStorage, you can store the specific content in a metadata field. It is definitely cool generals at least in size. Otherwise, I do not know a better solution

  Vyacheslav

• transform xml using Labview report programmatically

  I want to turn the report xml standard for Teststand in a more user-friendly format for users who need to view reports, but do not have access to the test station.  Check out the attached code.  It should work, but I get this error. "Objects of type"Script2"need not have such a member" "Script2" made reference to node msxsl: script javascript in the stylesheet horizontal.xsl Teststand.

  Well, I was just busy with the same question.

  I did a VI that transforms an XML in HTML.

  Input: output the XML and the path to the style sheet, an HTML tag in the same folder.

  Made in Labview 8.5.

  I have only tested with horizontal.xsl, as this is the format that I always use.

• customization of report output for Communication with rtf custom model-IN.

  Hi all
  
  I'm working on the output PO for Communication report purchase R12. I have to add a custom report template. To do this, I followed the steps below...
  
  
  (1) download the xml data file Standard to set data Source Data Standard purchase order (PO_STANDARD_PO.xml)
  (2) model rtf created, based on the data in the xml file that I had taken the definition of data
  3) has created a custom template for the definition of standard data with this provision of the rtf.
  
  (4) makes configuration changes in the tab control purchase and the purchase of Options of Types of documents.
  
  In the setup of purchase Super User RESP, I did the below configurations
  
  (a) organizations-> Purchasing Options - > output Format to the Document Format in the tab control in PDF format
  (b) procurement-> Types of documents--> and given of my custom here layout
  
  When I run this report ended with error as Exceptionjava.lang.Exception: error during PDF generation: null
  
  
  Please me advice how to proceed further or have you missed all the other things
  
  
  Kind regards
  Goussard

  for this, a patch is need to apply, we have applied the patch and problem solved.

  The metalink note I mentioned is * 1192234.1*

  Thanks for the update and for sharing the solution!