Problem with the thrust of the report the conversion to RTF

Similar Questions

• What is the problem with the conversion of objects with gradients to the gradient mesh?

  What is the problem with the conversion of objects with gradients to the gradient mesh?

  Radial gradients are special, and it could become difficult edit the gradient mesh resulting.

  Take the layer apnel and inspect your objects. You will find a clipping mask the cracks inside.

• Problems with the conversion of Word files to PDF via macro

  I have a weird problem with the Acrobat add-in. I want to convert a lot of files with the Word Add-In in PDF files. The printer is no option because it causes other problems.

  So I created a small macro for Word that transforms all the Word of a directory of files PDF files. The macro works great, but PDF files look right.

  I show you the problem with a Word file, first converted manually, then with the macro:

  First of all the image:  If the file is converted manually, it seems that the Word file and fonts are included.

  

  Second picture: If the macro converts the file it doesn't seem correct and the fonts are usually not included.

  

  I use Acrobat XI and Word 2010. The macro command is:

  ' new name for PDF
  pdfName = Replace(Replace(verz & "\" & fi.Name, "docx", "pdf"), "doc", "pdf")
              ' convert Word into PDF
              ActiveDocument.ExportAsFixedFormat OutputFileName:= _
                  pdfName, ExportFormat:= _
                  wdExportFormatPDF, OpenAfterExport:=False, OptimizeFor:= _
                  wdExportOptimizeForPrint, Range:=wdExportAllDocument, From:=1, To:=1, _
                  Item:=wdExportDocumentContent, IncludeDocProps:=False, KeepIRM:=False, _
                  CreateBookmarks:=wdExportCreateHeadingBookmarks, DocStructureTags:=True, _
                  BitmapMissingFonts:=False, UseISO19005_1:=False
  

  I did not, but the trick is to realize you don't want specific action. Rather, you want to treat a directory. DOCX files in the directory will be converted to PDF, then actions (if any).

• Problem with the conversion of pdf to IBR

  Hi, I have problem with IBR excel file conversion. File do not have a password, but in newspapers, I have:
  

  Manager of tasks/7 02.14 10:46:19.732 TaskLauncher_CmdLineConversion_44409_exsimple_stderr read 72 bytes: EXOpenExport() failed: file is password protected or encrypted (0x000B)

  Excel has macro and security for the worksheet.
  
  I can't find any post or information about it.
  Any idea, documentation?

  refer to http://docs.oracle.com/cd/E23549_01/doc.1111/e10800/c03_pdfi_all.htm#CIHCGCJA

  "To avoid a conversion of a file Microsoft Office expired, all functions that require a user input must be disabled. It is password protection, security notifications, such as disabling macros, and requests for online access to show online content or participate in programs of feedback from users. For more information about how to disable these and other similar goods, refer to Microsoft documentation for each product. »

• Problem with the conversion of Midlet (jad/jar) cod file (Jasymca 2.0)

  BB Storm last official OS.

  There is this wonderful program called Jasymca 2.0 which is a combination of programs of mathematics MATLAB and MAXIMA of high-end (subset to fit) and written in J2ME as a MOPED. To see a demo of it, go to http://webuser.fh-furtwangen.de/~dersch/jasymca2/indexEN.html and click on demo on the left. It's quite impressive... able to make the symbolic math and math matrix among others. The ultimate calculator for a PDA... and the best I could find out there.

  The only problem is that it is written in J2ME as a MIDLET and the runtime is stored as a combination of jad/jar. Now, I tried the standard conversion using the CAP as follows...

  CAP import = "C:\Program Research In Motion\BlackBerry JDE 4.7.0\lib\net_rim_api.jar" code name is jasymca-midlet jad is Jasymca.jad Jasymca.jar

  It seems to work very well. There are a few warnings about unused variables, but that's fine. The last line was "No Errors".

  .. .and he left me with a file .cod 229K

  When I insert it in my blackberry through javaloader, it loads very well.

  However, when I look in my download directory I 2 files related to Jasymca and not running.

  I suspect that it is because the cod file is too big. Is there another step I can do for the cod of the loadable file?

  Any help is appreciated.

  Thank you

  -Donald

  It takes more time than I expected.

  There is a preprocessor directives in the source files and to leave JDE to understand these guidelines, I need to modify the jdp.

  I stopped the investigation

  But I will say that I found.

  icons and data files must be located in the default folder.

  If the root folder of the package is src\

  path of the icon should be: src\myicon.png

  for now the icons are located in the src\icons folder

  in this case the image files are not accessible from the BlackBerry App.

  The second: there are some files showed up as the symbol file name first.

  JDE does not add these files to the project.

  I think that the best way would be to contact the developer of Jasymca and talking to him about the Jasymca and porting for BlackBerry

• Problem with the conversion of Partition Boot Camp

  I would have just dl and installed the trial version of 3.0.  After running and by selecting the boot camp for the boot partition, merge began to 'prepare' the partition for use.  After about 45 minutes, the process had not been completed.  I grew up the activity monitor and found that the process did nothing.  I closed the process, thinking I could start over again at the launch of Fusion.  Wrong, merger saw the partition boot camp into a virtual machine that could not be started.

  Is there a possible way to start the process of 'preparation '?  It is apparently the only way to correct the problem.

  Tried from a support ticket, but could not do while I wasn't a registered owner.

  I'm trying to make my choice between Parallels and Fusion, or just stick with BootCamp.  I hope someone can help me with this problem.

  Harry

  Dear Harry,

  I did the same thing yesterday. My BootCamp partition has Windows XP (SP3) and I also have Parallels. I'm now trying to decide if I stay with Parallels or Fusion 3 (to take a possible advantage over the 64-bit @ Snow Leopard).

  My upgrade was fine, it took about 15 minutes to get BootCamp running on the merger. A small step has been to re - activate my XP with Microsoft license, because the "material" changes. I have the MACBOOK PRO 13 '' 2.53 with 4 GB of RAM. I don't really have time to play yesterday, but between Parallels and Fusion 3, (64-bit), I did not see too much improvement on the 'speed '.

  An advantage of having any of virtualization software, is that you can have multiple operating systems running, such as XP, Windows7, etc. I need that because my work, the developer. If you can stay only with an operating system, I guess, BootCamp works very well.

  Kind regards

• Problem with the conversion of getDate() to Date format?

  Hi guys,.

  I need to convert the date selected for DateField string format (for example: yyyy-mm-dd).

  I put the date format DateField as "mm-dd-yyyy '.»

  I tried to get the date of this DateField and tried to convert the format 'yyyy-mm-dd ".

  When I tried, I had a bad outing.

  For example, when I selected 12 months he returned as "00" the following coding.

  SimpleDateFormat dtFormat = new SimpleDateFormat("yyyy-mm-dd");
  Date dtToConvert = new Date(mydatefield.getDate());
  strRequired = dtFormat.formatLocal(dtToConvert); 
  

  Can someone explain what that is the bug with this code or any other way to get the output as my requirement?

  Thanks in advance,

  Stéphane

  Oops, sorry, code should have been...

  DateFormat df = new SimpleDateFormat("yyyy/MM/dd");
  long dateLong = field.getDate();
  Date date = new Date(dateLong);
  String dateString =df.format(date);
  

• Download data - problems with the conversion of the date

  Hello
  
  I have a picture that I downloaded from a database of oracle using SAS. It has a column with dates in the following format: 10/31/2012 11:00
  
  When I download the data (via workshop SQL-> utilities-> data workshop-> load data) by categorizing my dates as varchar2, everything works fine... but fails when I choose my type in the Date column.
  
  Please advice how to fix this
  
  Thank you

  K I import my data with other tools. Looking at the workshop of data utility, no doubt you would put MM/DD/YYYY HH: mi: SS AM in the 'Format' field for this column.

• Problems with the conversion of files to the word

  I recently downloaded the judgment of Adobe Acrobat Pro XI for the possible purchase of my company.  I would like to convert it the letters that I worked with for Word while trying to work in Adobe.  When I did this, changed the dynamics of the letter.  It likely to change the letters, or even come as winddings.  What I am doing wrong?

  What I am doing wrong?

  Nothing. You simply overestimate the powers of the process. This is an approximation, but 90% time of manual editing and cleaning of files that results is necessary.

  Mylenium

• Problem with the conversion date by default.

  Hello
  
  I use JDeveloper 11.1.1.3. I have a 'read-only through sql access' VO in which I defined a query to retrieve the attribute "issuedate" of a table. The query is as follows:
  

  select to_date(issuedate,'dd-Mon-yyyy') issuedate from administration_circulars

  I tried using a spreadsheet sql and it worked fine (for example, it returns 'January 16, 13')
  
  However, in my application, I have a system on a chip to display this attribute. When I try to launch the application, I get "13/01/16. Anyone has any idea on this? I even tried to change the format from data of the user interface in the view object to 'none' so far so 'simple' value 'dd-Mon-yyyy', but it works at all.
  
  Thank you
  
  Mohamed.

  Have you tried it in a sql worksheet?
  It should return the date in the format as a string.

  Timo

• How to solve problems with the conversion of an email/webpage to PDF?

  I want to convert a newsletter by e-mail (600px wide and a sunken length - about 4 pages)) into a pdf file.

  If I view the document in a browser and then use it to create a PDF from Web page - I use Acrobat Pro 9 - it creates it is fine, but displays the document in the default page, which currently is A4. However, the title of original shows at the top of each of the 4 pages, and shows the address of the site at the foot of each page before the pagebreak.

  Can anyone tell how I can convert without these "extras" if it pleases you, and is there anyway to convert this type of document to PDF without going through these page breaks?

  You can disable the URL in your web browser in the layout. To change the stretchy header, go to the preferences of add-on PDFMaker in your browser and clear the checkbox "place headers and footers on the new page. Tab available, in this same dialog box, you can adjust the size of the page.

  

• Problem with the conversion of the date

  Hello
  
  I have a column called period_name which is of type varchar which contains data as jan-02 Feb-03 and 05-02, now my requirement is I want convert month names number say jan-02 to 01-02.
  
  I tried to use to_char (to_date(period_name,'mm/yy'), 'mm - yy') which gives good results to the selection, but when I use the same creation then Sunrise error
  
  
  [Error] Run (58:24): ORA-01858: a non-digit character was found here where was waiting for a digital
  
  
  Query:
  
  create the table dumm1 as
  (
  Select to_char (to_date(period_name,'mm/yy'), 'mm - yy') in the period_name of xx_alll
  )
  
  Concerning
  
  Published by: 862807 on June 13, 2011 03:30

  862807 wrote:

  Here when I write a select statement which I produced earlier works fine, but when I write the same create in her statement generates an error.

  No it's not.

  You're not extract all lines, you use Toad or some other GUI to confuse you. Enter the results data grid and type CTRL + end to fetch the last row. Or use sqlplus. The selection will fail too.

• Problem with the report and the system of axis 2d

  Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.

  What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).

  With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.

  I tried everything, but I could not remedy

  I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)

  Any help will be appreciated, thanks in advance

  Ierman

  I'll post my code here:

  Dim Xscale, Yscale
  XScale = Array (0,25,0,5,49)
  Yscale = Array(-0.2,0.2,-0.2,10,4)
   
  Call PicDelete()
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  Call GRAPHObjOpen ("2DAxis1")
  D2AxisTop = 1

  D2AxisBottom = 70
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_1")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale (0)
  D2AXISYEND = Yscale (1)
  D2AXISYORIGIN = Yscale (2)
  D2AXISYTICK = Yscale (3)
  D2AXISYMINITICK = Yscale (4)
  Call GRAPHObjClose ("2DYAxis1_1")
  Call GRAPHObjOpen ("2DXAxis1_1")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale (0)
  D2AXISXEND = Xscale (1)
  D2AXISXORIGIN = Xscale (2)
  D2AXISXTICK = Xscale (3)
  D2AXISXMINITICK = Xscale (4)
  D2AxisXTxt = ""

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_1")
  Call GraphObjNew("2D-Curve","New_Curve")

  Call GraphObjOpen ("New_Curve")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve")
  Call GRAPHObjClose ("2DAxis1")

  Dim Xscale1, Yscale1
  Xscale1 = Array (25,50,0,5,49)
  Yscale1 = Array(-0.2,0.2,-0.2,10,4)
  Call GraphObjNew ("2D-Axis", "grafic")
  Call GRAPHObjOpen ("grafic")
  D2AxisTop = 40

  D2AxisBottom = 37
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_2")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale1 (0)
  D2AXISYEND = Yscale1 (1)
  D2AXISYORIGIN = Yscale1 (2)
  D2AXISYTICK = Yscale1 (3)
  D2AXISYMINITICK = Yscale1 (4)
  D2AxisYTxt = "" ' testo asse label y
  Call GRAPHObjClose ("2DYAxis1_2")
  Call GRAPHObjOpen ("2DXAxis1_2")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale1 (0)
  D2AXISXEND = Xscale1 (1)
  D2AXISXORIGIN = Xscale1 (2)
  D2AXISXTICK = Xscale1 (3)
  D2AXISXMINITICK = Xscale1 (4)
  D2AxisXTxt = «»

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_2")
  Call GraphObjNew("2D-Curve","New_Curve1")

  Call GraphObjOpen ("New_Curve1")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve1")
  Call GRAPHObjClose ("grafic")

  Hi lerman,.

  Here is an edited version of your code that works on my computer.  A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels.  The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments

• I ran CHKDSK, the report tells me I have problems with the file system, usn journal. ___

  I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.

  Describe how you run chkdsk.

  That is what the report said: you have problems with the sys file?

  CHKDSK examines the disk space and use of the disk for the table of allocation of files (FAT) and NTFS file systems. CHKDSK provides information specific to each file system in a situation report. The report shows the errors found in the file system. If you run chkdsk without the /f on an active partition command line option, it can report errors because it cannot lock the drive. You should use chkdsk occasionally on each disk to check for errors.

  If you run chkdsk from a command prompt while Windows is running, it can report errors or it may not report errors - and it may report different
  Errors each time you run.  If this is the case, it could just be the way you run chkdsk.

  Here's how Microsoft explains this observation:

  "... CHKDSK may report that the disc is damaged, even when there is no
  current real corruption. This can happen if NTFS happens to modify
  areas of the disc on behalf of some programme activities that CHKDSK is
  review at the same time. To check a volume correctly, the volume
  must be in a static state, and the only way to ensure that the State is
  to lock the volume. CHKDSK only locks the volume when /F or/r (which
  involves the 'F') is specified. For example, you may need to run CHKDSK more than
  time so that it can complete all the steps in read-only mode. »

  If you run chkdsk from a command prompt, you are not the necessary static state and you can encounter errors "when no real corruption is present. This is how it works when you use this way.  Any changes made to a NTFS file system modifies the USN Journal.  If you are not in a static state, your USN change Journal probably all the time, so what you see (says something like that) can be quite normal.

  Two ways to ensure that you are in a static state is to run chkdsk from the Recovery Console or to schedule a chkdsk to run the next time that the system
  Restart by answering Yes to the question:

  Would you want to check this volume to be the next time the system restarts?

  If chkdsk reports errors when running in a static state, the errors should be investigated, resolved or explained.  This may take several
  chkdsk runs all of the issues and some problems cannot be resolved by chkdsk.

  If chkdsk runs the next time the system is restarted, the activity and the result will be displayed in the application event log.  Look in the Application log for
  Winlogon events and a source have the date and the duration nearby time chkdsk.

  It is in fact a chkdsk additional reading if you want to learn about it and it will explain everything you see and why your expectations exceed reality.

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony!

• OfficeJet 6600 - reports HP Connect "problem with the printer.

  I just bought an all-in-one OfficeJet 6600 and immediately installed on my MacBook Pro. Installation went smoothly, and I used it for scanning and printing. I am very happy. However, I noticed that HP Connect reports "Issue with printer." Well, it worked fine, so I ignored the error and continued to work.

  Tonight, I have installed the printer on a Windows 7 laptop. At HP Connect, it is always now reports "Problem with printer." That's it - no further details and no symptoms of any kind of problem. How to diagnose the 'problem' and how to fix it?

  Hi there, I know this may seem illogical, but I wouldn't worry too much about the problem with the printer State message in connected HP. I saw myself sometimes, and I was able to print successfully from a mobile device to the printer which connected HP indicated that there is a problem. Have you tried to send a job by using either the application mobile ePrint or to the e-mail address of printers for the printer in question?

  On the Windows 7 machine, you can also download and run the HP print and Scan Doctor to confirm there is no problem with the connection to the computer on which is installed the software of the printer or the printer hardware. Be aware, however, that the application is compatible with the Windows operating system only, so you cannot run it on the Mac computer, but unless you are having problems printing from Mac to the printer, there is no reason to suspect that anything is wrong.

  Hope that makes sense, but post comes back with other questions.

  Best.

• Problem with the main screen of firefox

  After the update of firefox to firefox 15.0 16.0.2's problem with the main screen. At the top of the main screen displays the bar (caption bar of the main form) that I have win xp and under this title is bar legend like win 7.

  Firefox is running on Windows Xp, if better, I can send the screen, but I don't know where is possible add image to this error report...

  Okay, the problem has been resolved, problem was with the Tab Mix Plus extension. I have an older version of this extension, because at work may not update directly, because I'm going to the Internet via a proxy. Download, update firefox extension directly through the proxy is not possible... I need to download via the other internet browser, in order to not do it often...