OSB: "MQ Queue Manager Name" customization is not possible?

Similar Questions

• Customization is not possible in WIndows 7 Starter

  original title: Windows 7

  I have one of these small computers Packard Bells. On the customization of the video training specifically

  says "wallpaper" was separated on windows 7 and is like that. Attempts to do so are met with the message
  customization is not possible. Why say you can, if you can't. OW can you? cordially percyp2

  I think you have Windows 7 Starter, which does not allow for customization. You must use another version of Windows 7 to use the customization.

• Would it not possible to see calls suspended in other lines as well

  Hello

  When a call is on hold, it is visible in the suspended queue calls. Is it not possible to see the suspension of calls in other queues so (Calls Outstanding, your group calls)?

  Is it possible to disable the call suspention in VSM?

  Thank you

  Stasys

  Hello

  Lists in circulation filters are fairly easily customizable (Okay okay, it's easy in case if you have a little experience reading/editing xml files and understanding of sql queries):

  All of these filters and queries of joins are defined in the file Config/config xml - browseviews.xml. You can take a look and try changing some filter conditions for suspending criteria.

  Check the other forum discussions, there are several messages with advice and informed about this.

  Please do not hesitate to contact if you need assistance.

  I doubt that much is it possible to disable the suspension of appeal device in the system. But who knows...

  Concerning

  Gytis

• Toshiba Wireless Manager - not possible to choose the authentication protocol

  Hello

  I use for my Toshiba Wireless Manager mobile broadband connections. In a connection profile, it is not possible for me to choose what authentication protocol to use. In the Advanced Settings tab, the authentication section is grayed out. Using the program is mentioned that you can change the authentication settings.

  Concerning

  Post edited by: malo

  Hello

  As far as I know to create a new profile.
  Then you could add the APN, user name, password and authentication protocol
  But my knowledge in most of the cases, the SIM card is detected automatically and no manual work is required. If you do not need to choose the authentication protocol

  Welcome them

• Stop a while loop in a sub - VI in a message in queue manager

  Hi all

  I am trying to program a control for certain manufacturing equipment. For this I use a message in queue manager. Within the QMH, I have a VI that controls a particle size probe (called a PPC, at the bottom of the first image. When I start the main-vi, the PPC.vi is on the case "Parsum measurement", in which measurement data are repeatedly called in a while loop (screw for call data provided by the manufacturer of the probe. Also, I am aware that I don't connect the data again. That will come later.). When I want to stop the measure, I have send the message "Exit" to the PPC.vi (last photo). However, the vi is stuck in the while loop in the case of the measure and is unresponsive. I tried to send a notifier with a constant value true, but that did not work as well.

  You have any suggestions, how can I stop the while loop before you send the message "Exit"? Or is the completely different way to approach this problem?

  Thank you!

  

  

  

  I just threw together a framework very fast to help you get started.  The thing I noticed is that the library of the queue doesn't have a time-out of the waiting message entry.  Since it is your own local copy (to the project), add a timeout and connect to the element Dequeue function.  I by default set to-1 and make it "recommended".

• ACS - AnyConnect 3.0.5080 Network Access Manager (NAM) by selecting the right certificate

  Hello

  We are authenticate our users of portable Windows7 wireless using Microsoft CA issued certificates from computer to Server v4.2 ACS Cisco successfully using EAP - TLS

  However AnyConnect 3.0.5080 is installed and Network Access Manager (NAM) runs on laptops that Nam appears to be selecting details in the bad certificate for EAP - TLS authentication to the ACS server, it selects username details in a personal certificate on the computer of users that is used by LYNC 2010 and does not use the installed machine certificate.

  Newspapers of ACS that indicate this is attached.

  NAM will always use the details obtained from a personal certificate of feedback a computer certificate (if they both have the same domain name that they contain).

  Nothing specific that I should be looking.

  Thanks in advance for any help.

  No problem Jim

  If you could please update this thread as you progress, this will help a lot of customers in the future!

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Get-file - name 'network' - does not work?

  Hello

  Is it just me, or this doesn't work as it should?   (Using vCenter 4.0 Update 1)

  Get-file-name 'network '.

  Returns:

  Get-file: 07/10/2010 22:57:03 Get-file with the name 'network' is not found, using the specified filters.

  They work very well:

  Get-file-name "vm".

  Get-file-name "of home.

  Get-file-name 'datastore '.

  Basically, I am trying to create a place of reference to use in a cmdlet New-folder to create a folder in the area of networking (and then eventually move networks to this new folder).

  Thank you!

  Eric K. Miller, Genesis Hosting Solutions, LLC

  http://www.genesishosting.com/ - lease of our ESX cluster frame!

  I'm afraid that the current to PowerCLI version does not support the network folder.

  As a temporary diversion, you could do something like that

  $NetFolder = Get-View (Get-Datacenter -Name "Genesis Data Center").Extensiondata.NetworkFolder
  $NetFolder.ChildEntity | where {$_.Type -eq "Folder"} | %{Get-View $_} | select name
  

  The example above shows just the name but you have access to all the properties in the managed folder object.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Page customizations do not propagate to other users

  Hello everyone,
  
  I am facing a 'problem' when a user customizes a Webcenter portal page.
  The customizations are preserved, but only for that user, as if it was a customization and not a customization...
  
  Is there something to configure in the MDS to share customizations? What and where?
  To be sure, the user customization and no customization?
  
  Thanks for the support.
  
  Vincent.

  One possible reason could be that you have configured the MDS with a UserCC.
  You can configure a class that will be used by the MDS which will return the name of the layer to store customizations in. By default, only the SiteCC is configured that will store the customizations in a layer that has the name of the application.
  In your case, this class can be the UserCC that stores customizations in a layer with the name of the user. That might explain your behavior.

  In order to change this, open the adf - config.xml in the ADF META INF file. The MDS Configuration, make sure that the SiteCC class is added to the list and remove the UserCC if its there.

  If you don't see the UserCC in the list of classes of customization, then it should be something else, but depending on your behavior, it seems that the SDM is using the UserCC.

  Published by: Yannick Ongena on 23 January 2012 10:44

• The unsaved changes in queue: [File name] save before closing?

  Hello!

  FM 9 on Win 7 Pro.

  I'm a long-time user of FM.

  I am trying to open the files I could successfully open before I left work yesterday. I can open FM and open the books of FM. When I try to open an FM in a book, or an FM file not in a book, I get this message:

  "The unsaved changes in queue: [File name] save before closing? No Yes No Cancel.

  It doesn't matter which choose (Yes, no, cancel), following FM shows this message:

  FrameMaker 9 Application has stopped working. Windows can check online for a solution to the problem.

  Search online for a solution and close the program

  Close the program.

  Details of problem

  It doesn't matter what file I try to open (recently worked on the files and I have not touched it since some time). Same messages, anything.

  I tried to update the book (the update seems to happen), save the changes and then try to open. Same error messages. I had hoped that updating the book would clearly any possible referral.

  I tried several reboots, nothing works.

  Help!

  Thanks in advance for any help!

  Terri

  Since his happens with all files, my suspicion is that your application data are damaged. Try this:

  1. close FrameMaker.
  2. Delete the following directory: C:\Users\[user]\AppData\Roaming\Adobe\FrameMaker\
  3. reopening of framemaker and see if the problem is reproducible.

• My Oracle Forums manage name changed without my notice!

  Hello Oracle moderators of the Forums,
  
  I joined Oracle Forums 04/04/08 with and email address (1). I decided to change my email address and manage names, so my name of handful of forums is cutedba and my email address is (2). I already had like 8 messages in oracle forums. Today when I logged in the oracle forums, I found my handle name is user8722709 and my messages recovering at the only post (with this thread, it will become two positions).
  
  and my date of junction became 19/08/09.
  
  I went into the Panel and changed the profile name and a handful of cutedba. I received the following message is displayed:
  
  "The grip, you are trying to update is already in use, please mention any other value and try again."
  
  
  and I logged in under my new address of e-mail (2) as usual. Please fix this for me. Because I'm the cutedba in the Oracle Forums.
  
  
  I would also like to score one of the sons that I created earlier as a reply, but I can't the forum think that I'm not the author of this thread:
  
  How to install oracle several houses in oralce 9i on unix
  
  
  Thank you and best regards,
  
  
  cutedba

  I am completely confused about the issue. Please keep these principles in mind:

  -Your username (A), (B) handle and email associated with your account to Forums (C) (to receive emails from Watch) are three different things.
  -A, which is always an email address, can be changed to oracle.com/admin/account, NOT through your control panel. B and C ARE editable via your control panel. (Finally C will automatically the same as A.)

  If you have two different instances of A (many people do), each will be associated with different Forums handles and different stories, and they cannot be merged. If you want to "transfer" your ID, you must ask the account not desired to be deleted first (whole Forums associated with is also deleted!), then you can edit the handle of the existing account you like.

• Session manager loses some but not all of the tabs on the restoration.

  When restoring a cross, Manager of Firefox session restores only some of my tabs, for example 35 to 50. If I use the plugin memory restart in my toolbar, all my tabs are restored. The lost tabs are at the end of the string but sometimes usually come from community. There is not any correlation with the length of time that the tabs were opened; Sometimes, I'll lose the tabs who survived several reboots. My pinned tabs are always restored correctly and sometimes I have a string of empty tabs at the end, this problem started earlier this year, when I abandoned FF 26 reluctantly and started making regular updates to semi; I am now at 40.0.3.

  Also, someone of the current solutions to the order of the tabs work back after a reboot? I searched the archives, but none of the solutions offered everything worked several appear to be invalid after several versions of Firefox.

  1. when I restart after that crash FF is open for at least an hour, none of the additional tabs do not appear.

  2. a restart with extensions disabled produces the same result.

  3. the sessionstore.js file is approximately 1.2 MB

  4. as far as tinkering with about.com goes, I expect FF stable enough so that I wouldn't have to tinker with it to get a 'normal' functioning

  The problem of loss of tab is now moot, because I installed the extension by Michael Kraft Session Manager and tabs are not lost during a crash recovery or kill the Task Manager.

  My problem the original message is the reversal tab order when restarting after a crash. As I said previously, I searched the archives, but none of the proposed solutions has worked everything several appear to be invalid after several versions of Firefox. Is there a solution to this ongoing problem?

  A new edition which has arisen is a lack of space for the icons in the toolbar. The ability to create an additional toolbar with right click has been removed as a replacement for the infamous "Menu" that I refuse to use. Are there any 'hidden' to the user method to add another toolbar without generating any code?

• In thunderbird is without advertising manager and tools is not a manager of working keys after installation

  try to use the key Manager, settled, but do my keyboard shortcuts is not possible.
  help on a topic dating back some years ago and is more appropriate.
  How to make my own keyboard shortcuts?

  You can install it in TB by following the Instructions in the link given above.

  CTRL-ENTER is the key for sending a message.

• HP Simple pass Manager 6.0 does not work in Firefox 30

  I have been using HP Simple pass Manager 6.0 almost the entire Bill by paying websites. Recently my Firefox browser set to update Firefox 29 to 30 of Firefox. Now my HP Simple pass Manager 6.0 does not work in Firefox 30 in all.

  I contacted Mozilla Firefox and they said it's you plugin to increase the power of the fix. Is there a plugin fix soon?

  I rely on this program for extra protection.

  Thank you

  Chief

  Chief,

  Downgrade to the version of Firefox prior to Version 30 to allow the HP SimplePass extension to work.

  The instructions are below.

  The downgrade of the browser can disrupt the HP SimplePass database.  In fact roughly about everything upsets the HP SimplePass database.  The smile.

  Archives of Firefox

  Example: 26.0 for Windows download version (using a slightly different path for Mac)
  https://FTP.Mozilla.org/pub/mozilla.org/Firefox/releases/26.0/win32/en-us/

  ===========================================================================

  You can overload well enough, that is, install the old version of Firefox on the top of your new version.

  To be sure, export your bookmarks before making any changes in case something weird.

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8
  • Export your Firefox bookmarks
  • Download and install your selected version of Firefox

  Continue:

  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your model of laptop
  • Start the computer and connect

  Reminder: Hard Reset is just a device to reset.  The procedure do not destroy your files, or it destroys your Windows installation somehow.  It's just "clears the cobwebs".  Depending on the cause of the problem, this kind of "reset" can fix a variety of computer problems.

  If no joy:

  Open the Document of Dragon:

  HP SimplePass upgrade instructions

  Follow the procedures described in the guide for

  1. Export your Webcards
     
  2. Reinstall the driver of validity
  3. Restart / reboot the computer and log in
  4. Fix HP SimplePass program
  5. Restart / reboot the computer and log in

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Click on accept as Solution when the answer is a good solution or workaround!

  Although I strive to reflect best practices of HP, I do not work for HP.

• The HP Client Manager Security extension does not work

  I have a red shield on the top right of my address bar saying"

  The HP Client Security Manager extension does not work because the HP Client Security Manager plug-in has not been activated.
  Open the HP Client Security Manager Console browser integration user Page for additional instructions.

  How can I find a user control panel browser integration page? do not see it anywhere? help needed please thanks Bill

  Hello

  Unfortunately, you may have to contact HP support for more help:

  http://h30434.www3.HP.com/

  Kind regards

• I have a XP product key registered in my name, but do not have the disc. Re download XP on the microsoft site?

  Windows XP download from the web

  I have a XP product key registered in my name, but do not have the disc. Re download XP on the microsoft site? Then, I want to install XP on my mac via Fusion 4

  Hello

  Unfortunately, you can not install the Windows XP operating system on your computer without a disk.

  Reference: How to install or upgrade to Windows XP: http://support.microsoft.com/kb/978307

  Hope this information is useful.