OSB Proxy Service execution Timeout

Similar Questions

• Message access control in the OSB proxy service when the Service Type is the Any SOAP Service

  Hello

  We have a proxy OSB service where the Service Type is 'no matter what SOAP Service'. We use Auth.xml to authenticate messages to achieve this proxy service.

  It is, ca we apply Message this proxy access control so that only user A is allowed to sent message has and only user B is allowed to message sent B?

  Us know if the proxy OSB service is based on a wsdl, then we can apply access control message for each operation in the Security tab - and thus specify which user can access the operation. But unfortunately, we have not a wsdl, because this service proxy is a proxy gateway and must accept any SOAP message reaches.

  For example, if the user name in the SOAP header is msgAUser, get is accepted.

  "< soapenv:Envelope xmlns:soapenv ="http://schemas.xmlsoap.org/soap/envelope/">"

  < soapenv:Header >

  "< xmlns:wsse wsse: Security ="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">."

  < wsse: UsernameToken >

  < wsse:Username >msgAUser< / wsse:Username >

  < wsse:Password >msgApwd< / wsse:Password >

  < / wsse: UsernameToken >

  < / wsse: Security >

  < / soapenv:Header >

  < soapenv:Body >

  <Get>

  ...

  < /Get>

  < / soapenv:Body >

  < / soapenv:Envelope >

  If the user name in the SOAP header is msgBUser, then MessageB is accepted.

  "< soapenv:Envelope xmlns:soapenv ="http://schemas.xmlsoap.org/soap/envelope/">"

  < soapenv:Header >

  "< xmlns:wsse wsse: Security ="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">."

  < wsse: UsernameToken >

  < wsse:Username >msgBUser< / wsse:Username >

  < wsse:Password >msgBpwd< / wsse:Password >

  < / wsse: UsernameToken >

  < / wsse: Security >

  < / soapenv:Header >

  < soapenv:Body >

  <MessageB>

  ...

  < /MessageB>

  < / soapenv:Body >

  < / soapenv:Envelope >

  Any suggestions please?

  Understood.

  My current client, we have faced the same problem and implemented a similar design which nevertheless has important benefits.

  The problem with proxy input all SOAP is not only in the complexities of authentication. Most important, resources fine grain (thread) management becomes impossible: proxy entry has a workmanager, one constraint of son max. If any single service behind entered proxy knows an influx of requests (because of a peak or a misconfigured customer), he eats the workmanager dry and the rest of the services become too inadmissible.

  In this spirit, we have implemented the following diagram. It's a little more complicated, but it serves us well for a few years already:

  EntryProxy 1-> Interceptor entering Proxy-> Proxy 1

  EntryProxy 2-> Interceptor entering Proxy-> Proxy 2

  ...

  Enter proxy doesn't do Nothing but shall forward the request for interception of incoming traffic. Power of Attorney of the entry, however, has its own WSDL, authentication and the workmanager which allows precise control.

  Another important aspect of a proxy of the entry, it is that it passes a custom header containing the name of the destination of the interceptor, e.g. TargetURI = "ProxyService/Paypal/Paypal.

  Incoming Interceptor Proxy performs all recording, the error handling and other common tasks.

  Then, according to the last header, the proxy of the interceptor makes a dynamic call to route to the specified destination.

  Yes, this design has an additional moving part - a proxy entry - but he a) works b) guard control all in our hands. The entry proxy is a very small point; When I need to make a new one, I just copy an existing one and replace the WSDL file and the value of the TargetURI - 30 seconds of work.

  Hope that helps.

  Vlad

  http://vladimirdyuzhev.com

• Question about the OSB proxy service

  Hello
  
  I'm new to the world of SOA/OSB. I'm working on a POC from the OSB for our existing application. I have a question about the definition of the URL endpoint to the proxy service. It is possible to specify a generic url endpoint to a proxy service. Something like / SomeService / *. I tried and got errors. Is it possible to do somethig like that or it is a mistake on a conceptual level.
  
  Thank you

  anything you type in the uri of the endpoint of entry will be the contextroot to your service, so /SomeService should indeed be sufficient or as mentioned Pierluigi/SomeService/blabla is also valid (Betty is not a parameter query, but only a part of the contextroot)

  If you want to use a service like http rest

  / SomeService/blabla would still be the contextroot, and after that, you can use the query parameters

  / SomeService/badarou? var1 = test & var2 = test or/SomeService/blabla/employee/id/1

• OSB: Proxy Service Configuration

  If I understand the "Proxy service" called the service '' Business. ''
  When I set up the "ProxyService" so it should be a section of 'Service create existing' in the 'General Configuration '.
  
  But in my workshop, I don't see the "Create from existing Service" section.
  There is no way I can bind the Proxy and services businesses.
  
  No idea why this article is missing in my workbench and how to solve?

  But in my workshop, I don't see the "Create from existing Service" section.

  Not sure why it is not available with work table.

  There is no way I can bind the Proxy and services businesses.

  You can bind services to businesses with a proxy service yet. What you need to do, it's that configure the workflow of the proxy and mail flow messages add a node of the route. From this node, you can call the business service.

  Alternatively, you can add pipeline request and response in mail flow (before the node of the route) and you can use publish/service legend action from there to call a business service.

  Please see-

  http://download.Oracle.com/docs/CD/E13159_01/OSB/docs10gr3/Userguide/modelingmessageflow.html

  Kind regards
  Anuj

• using weblogic unit-of-order (PUA) in the osb proxy service

  Hello
  
  I have a deployed on Weblogic server JMS queue. The messages in the queue are grouped using Weblogic JMS_BEA_Unit-of-order (PUA).
  
  Now, I have an OSB 10 g of Proxy Service that reads messages from the queue. The problem is, upon receipt of a message, acknowledgement of receipt is sent immediately, thus eliminating the message from the queue and the next with the same unit-Of-Order message is ready for processing.
  
  But the business scenario is the first message to read, processed and then decide to recognise or not. The second message should not be interpreted, unless the previous message is processed successfully.
  
  Can someone help with this scenario?
  
  Thank you
  Alex
  
  Published by: user9024636 on February 11, 2010 02:57

  with PUA, you'll need to do the syschronous transaction.
  1. make transacation enable XA
  2 using the road for the sychrounous transaction
  3. use the routing options, and then select mode = request-respone
  4. If the Proxy service is based on the jms then you should also together WHAT JMS Transport-> Advance settings-> XA is required-> checked

  Kind regards
  http://SOA-Street.blogspot.com

• Search for OSB proxy service

  I create a dynamic road in a proxy OSB service. Is there a way to search for a service proxy by using its 'Endpoint URI"?
  
  Thanks for any help!
  
  The f

  I think that Pascal describes the only possible way for your case.

  As far as I understand, you want to have a function that looks somehow in the current configuration. Something like getProxyByEndpoint(). Am I wrong? I had a similar need, so I filled the enhancement request in Oracle support. I encourage you to do the same. You will not get your service anytime soon, but someday maybe... :-)

  There is a huge 'thinking skills' gap in OSB. I think that we can help make OSB a better product describing our needs in an enhancement request form.

• BEA-382051 any transaction not found on the OSB Proxy Service

  Hello
  
  I have a proxy mq service and that has properties enabled for 1. Mandatory transaction 2. Same operation required for a response. Also added routing with QoS Options to "Exactly Once" actions to publish and c/o Service.
  
  MQ proxyQ-> proxy1 local-> localPS11-> localPS12-> localPS13
  MQ proxyQ-> local proxy2-> localPS21-> localPS22-> localPS23
  
  All these PS11, 12,... have publish and service a/s for various DB operations such as readBS, insertBS and updateBS.
  
  I searched a few threads in the forum, Anuj has also suggested to activate Options routing with QoS to "Exactly Once".
  What I did is I added and allowed to c/o/Publishing Service requesting this property [insertPS-> insertBS] and [updatePS-> updateBS] only.
  * NOT for [readPS-> readBS] area.*
  
  What is the cause of this error? I mean, what do I need to enable to publish them all and s. c/o actions regardless of readPS or updatePS?
  I also tried with httpProxy instead of mqProxyService service
  
  Error: BEA-382051 any transaction not found on the current Thread
  
  Your suggestion is very apprecited.
  
  Thank you
  
  Edited by: 1002815 may 6, 2013 07:59

  Yes, no need to add this legend and node of Road Service by participating in the overall transaction by default.

  Kind regards
  Anuj

• No matter what xml Vs mail proxy service

  I am bit confused about the difference between any xml service and mail service with the type of request message of XML in osb proxy service config. any help pls?

  Hello

  If you use a load XML in and out, I don't see much difference...

  See here...

  http://docs.Oracle.com/CD/E28280_01/dev.1111/e15866/ui_ref.htm#i1318149

  Service - select this option to create a service that can receive messages from e-mail data, type and respond with messages of a different data type.

  Any Service XML - select this option to create an XML service that does not have an explicitly defined interface and concrete.

  See you soon,.

  Vlad

• Error while trying to generate the Proxy Services on OSB

  Hello

  I am developing some services on OSB, every service call stored procedures using a database of JCA adapter.

  I followed this tutorial:

  https://guidoschmutz.WordPress.com/2010/08/08/Oracle-service-bus-11g-and-DB-adapter-a-different-more-integrated-approach/

  Business service are ok, they work fine, I tested it directly from OSB.

  Problems when trying to generate the proxy service.

  The General configuration of the proxy after set the source of the wsdl and when I specify jca file proxy service, an error message returned:

  "Unable to update JCA transport invalid JCA proxy service. Transport exception occurred with the following message:
Invalid JCA file for JCA proxy service. If you are creating a Proxy from a Business Service, please select a different transport type (for example, http). If not, JCA file must contain JCA activation spec properties."

  And here's my content created by JDeveloper jca file:

  
  

  < name of the adapter-config = "getApprover" = 'Database adapter' adapter wsdlLocation = "getApprover.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">

  < connection-factory location = ' ist/DB/adapter' UIConnectionName = "Adapter" adapterRef = "" / >

  < endpoint-interaction portType = operation "getApprover_ptt" = "getApprover" >

  < className = "oracle.tip.adapter.db.DBStoredProcedureInteractionSpec interaction-spec" >

  < property name = "SchemaName" value = "APPS" / >

  < property name = "PackageName" value = "ERS_SKS_TASK_UTILITIES_NEW_PKG" / >

  < property name = "Procedurename" value = "GET_APPROVER" / >

  < property name = "GetActiveUnitOfWork" value = "false" / >

  < / interaction-spec >

  < output / >

  < / interaction of endpoint >

  < / adapter-config >

  
  

  Is there someone who had attempted to use the JCA transport with database adapter already? Please give me a suggestion.

  
  

  Thank you.

  Fairlie
  

  Hello

  In transport, changes in the Protocol on the proxy for local or http service.

• OSB - access to the operational parameters within the Proxy Service

  Anyone know if it is possible to access the parameters of functioning within a Proxy Service?
  
  Use instead of logging case, we realize audit by inserting into a database. In some circles, we want to turn this option off. I would like to reuse the fair to decide or not to audit logging logs.
  
  If the flow of messages would have if (auditLevel = "Warning") then BusinessService legend for the audit.
  
  Doing it this way allows operations choose whether or not an audit, rather than make changes to the code in different environments to choose or not to audit.

  A few months back I was also working on a similar requirement where the customer would not have to go to the configuration for OSB change (and even update) to change the log level or beginning of audit. After searching for a bit, we have implemented the legend of java to read a property file and provide the value of the flag during the conduct of the audit. We have also created a java utility that allows to clear the cache of the server (because the server load & updates cache the file after each reboot). So whenever we need to make a change in the check indicator, we just change the value in the properties file and clear the cache of the server. This makes the new copy of the file of properties available in the cache server and java OSB legend takes up the same.

  It was quite complex, but the only one best solution we could find. Please let us know if you get something better.

  Kind regards
  Anuj

• OSB - Manager of errors in binding to the proxy service

  Hello!
  
  I had a proxy service that queries a POP3 server to download emails and process them.
  My question: How can I bind an error handler to the proxy service to notice when the POP3 server is not available?
  So, I would put an alert when the OSB loses the connection to the mail server. I tried to put an error handler to the top component of the mail flow page, but it does not work...
  Could someone help me?
  Thank you!
  
  Viktor

  For the transport of poller (e-mail/FTP/File, etc.), it is not possible to intercept the transport layer errors, in your service error handler. Re: OSB - Manager of errors in FTP to TransportException transport

  Thank you
  Maury

  Published by: Manoj Neelapu on June 28, 2010 15:51

• OSB: Call service business, proxy non-MTOM MTOM

  Hello
  
  It is very easy to call non-MTOM MTOM active business the proxy service, but I don't know how to do it in an opposite way. I have the web service (http) with binary data in Base64 proxy in a soap body element and I would call a business (web service over http again) using MTOM format service to send binary data in binary format (and not base64 as in proxy). Is it possible to decode Base64 binary data in a kind of proxy service and send them this proxy for a service business using MTOM?

  I understand the flow that you propose, but I do not know how to pass the decoded data from legend of Java to mail flow. As far as I know I can return only primitive, String and XmlObject, because nothing else can be handled in mail flow.

  Yes you are right. But you can also return DataSource in the legend of java. Please http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/pojo.html

  Now the solution/POC - tested on my linux machine local work

  package manoj.javacallout.binary;
  import java.io.BufferedReader;
  import java.io.ByteArrayOutputStream.
  import java.io.InputStream;
  import java.io.InputStreamReader;
  import java.io.OutputStream;

  javax.activation.DataSource import;
  Import javax.mail.util.ByteArrayDataSource;

  import com.sun.org.apache.xml.internal.security.utils.Base64;
  /**
  * TODO: I use sun internal API for decoding for simplicity. You must modify this code and base64 decoding library
  * Ideally should use using http://commons.apache.org/downloads/download_codec.cgi
  *
  * @author mneelapu
  *
  */
  public class Util {}
            
  Public Shared DataSource decodeBase64 (DataSource ds) throws Exception {}
  InputStream in = ds.getInputStream ();
  BufferedReader bin is new BufferedReader (new InputStreamReader (in));.
  Byte [] decodedB64 = Base64.decode (bin);
  ByteArrayDataSource decodedDS = new ByteArrayDataSource(decodedB64,"binary/octet-stream");
  Return (decodedDS);
  }
  }

  Java legend at decodeBase64
  Parameters
  javax.activation.DataSource = [$body / *]
  Result
  javax.activation.DataSource = response

  Now, replace the $body with the answer decoded base64 of the legend of java

  Replace [content of the node] [XPath undefined]
  in [body] with [$response]

  Use $BEA_HOME/modules/javax.mail_1.4.jar for the compilation.
  Let me know if this solves your problem.

  Thank you
  Maury

  Published by: mneelapu on April 20, 2009 15:23

• OSB: Job manager associate a proxy service

  Hello
  
  Can someone tell me please how to associate workmanager (already present in the weblogic administration console) with a proxy service?
  
  Thank you.
  Kalpana.

  You will find in the proxy service configurations "Political Intervention" here you can associate managers work with the proxy service

• Is it possible to secure a Proxy Service to the level of functioning of OSB 11 g?

  I have a web service (for example, Server1) that including 2 operations: method1, method2.
  
  And I have defined 2 users to the Weblogic domain: consumer1, consumer2.
  
  The consumer1 can access Server1.method1 () only. and consumer2 can only access the Server1.method2 ().
  
  I know that I can put the safety of service level in the tab 'Security' of a proxy service.
  
  But can I set the security to the level of operaton as above description?
  
  Thanks in advance!

  You can go to the Security tab, and then the message of access control, all operations will be listed for each operation add a user/role as needed. To do this, you should, however, a security policy (auth.xml just polished predefined enough.)

• problem in the oracle service bus proxy service osb message flow

  I want to create a master service proxy that take 4 paramaeters as follows
  -Master of business
  1 - username password-2 3 - phonunumber 4-vouchernumber
  
  so I need the card to open business session
  It will take 1-2-Word past the same previous input user name
  
  then recharge business service will take 1-phone number 2-exhibit of the main service and session of the open session object
  
  then call to business closesession that will take the output of the opensession session and send the "State" of the output of the masterproxy :)
  
  can someone help me out here? its urgent
  
  Published by: user13027256 on November 29, 2011 12:53 AM

  Hello

  If you need to call several Business Service and use the legend of Service actions and at the end, use action road. If he's single legend in proxy service using only course of Action.

  I'm not clear what you mean! Please develop...

  And in the Action of the road... > you can use request action replace action to replace the application payload content (Business Service).
  Replace the Action:
  Leave the empty Xpath in variable body with Expression [request payload structure] and use the content of the node replace!

  Afonso