OSM on master pages

Similar Questions

• Icons/widgets pinned in the footer and header on my master pages do not inherit these attributes when placed on the pages of the subsites.

  Not sure why this is happening, but I had to go back on all of my pages to see if the icons/widgets have been pinned activating / disabling back and fourth of my master to my pages of subsites. When I select the icon or widget in the master and then switch to the sub page it appears but when I go back to the subpage again the icon or widget is missing. As if it was not all loans of a pain during editing and display of the site on my iphone6S over my copy of text/body is pushed up under neath the header. The Muse of the hell what? I have found and manually corrected the problem, backed up, and when I published the same problem occurred. 5 times now.

  Here is the Master Page with header and icon or pinned widget.

  

  Here are the Sub Page with the attributes inherited from the Master Page.

  

  This is what is happening to the pinned widget or icon.

  

  And that's what happens when published and posted on mobile.

  

  All the other sections of my site works perfectly, but for some reason any beyond my research and this section attempts is angry.

  Bad muse!

  Someone out there has the right answer?

  No, you can upload your own file to RONNIERAYMENDEZ.COM, you can ignore the file in dropbox.

• Why does not one of this dokument indesign pages follow the position of the master page?

  Why does not one of this dokument indesign pages follow the position of the master page? See photo.

  Use your tool page and drag one to the top.

  

  Or select both and use the alignment icons in the control panel

  

• Newbie question: select a region on a master page?

  Hello

  I need to select and delete the images of footer of a master page (actually a gap of two pages) and want to learn so if someone could tell me a command or commands I can try to understand to use it. Basically a specific MARQUEE select the bottom eighth page or so - I searched with each quarter I can think, but what I found seems to take care of something else more involved.

  Thank you

  Gary

  I wrote a sample script for you to play with:

  doc = app.activeDocument;
  pageHeight = doc.documentPreferences.pageHeight;
  page = doc.pages[0];
  pageItems = page.pageItems;
  bottomPortion = pageHeight / 8 * 7;
  bottomItems = [];
  for(c=0;c bottomPortion){
          bottomItems.push(pageItems[c])
      }
  }app.selection = bottomItems;
  

  This script will select any element with a lower edge that extends beyond the low 8th front page.

• How to duplicate a Master Page and modify it without Muse crashing?

  I right click on a master page and click on duplicate.

  This works.

  But when I try to change the name of the page in double of "eWeek 2014' to 'eWeek 2016' Muse crashes."

  I have six master pages; I have reproduced and modified for a long time, but yesterday it did not work.

  Can someone help me understand what the problem is?

  Thanks for your help.

  Hello

  Please send your. Muse file to [email protected] with a link to this post.

  If the file is larger than 20 MB, you can use a service to share files like SendThisFile, DropBox or Adobe SendNow.

  Thank you

  Preran

• 2 vertical bars using the master page

  If I use a master page from mouse shows two bars vertical in the browser. How can I solve this?

  This problem only occurs when you use a master page

  

  Hello Edi,

  This normally happens when you add any code iframe in Muse design.

  If you are using any 3rd party code that creates an iframe then you will have to style code iframe.

  However if it is a page by default to Muse without 3rd party widget or iframe code, I will propose you to publish the file and let us know the direct link here so that we can look at the site codes.

  Thank you

  Prabhakar Kumar

• How to identify the master page of replacement

  I think that this forum must be broken. Surely questions have been over the years who use the term "ignore".

  Anyway, every time I move a master page for the body, I get the message asking if I want to maintain the substitution. I looked and looked and did not find that on the page of the body is the substitution of the master page.

  How will I know which chokes on Framemaker? I use FM 12 in Windows 7.

  Thank you!

  Hi Nancy:

  I know! We must put our detective hat and grab our magnifying glasses to understand. You can put it on a list of gifts here: host.

  From my experience, once removed, always removed. Are back you (or someone in your office) do anything to add in without knowing it? For example, by selecting the single page framework model and makes it a little more time to accommodate an additional line? If the framework model is just a fraction of a different point in the frame of the page master, it generates the message.

• All instances of object in the master page

  I have a field of text at the top of my master page object. When the user selects from a drop-down list object, background color of the text box must change from white to green, yellow or red. I have created the script to the change event of the fall down and it works properly until a second page is created dynamically, as a result of text, the user added to other areas. How can I select all instances of the text field?

  Here is my script:

  Form1.Subform4.Table2.Row1.Overall[0]::change - (JavaScript, client)
  if ($.boundItem(xfa.event.newText) == "Green") {
    xfa.resolveNode("#pageSet.Page1.OverallTop").border.fill.color.value = "204, 255, 204";//green color
  }
  if ($.boundItem(xfa.event.newText) == "Red") {
    xfa.resolveNode("#pageSet.Page1.OverallTop").border.fill.color.value = "204, 255, 204";//red color
  }
  if ($.boundItem(xfa.event.newText) == "Yellow") {
    xfa.resolveNode("#pageSet.Page1.OverallTop").border.fill.color.value = "255, 255, 0";//yellow color
  }
  

  Hi DKinsley ,

  I had a similar problem and solved in this way:

  You must change the JavaScript code in this way, you change all cases on each masterpage, where the element is inherited.

  In you case the code would probably look like this:

  Form1.Subform4.table2.Row1.overall [0]: change - (JavaScript, client)

  • If ($(xfa.event.newText) .boundItem == "Green") {}
  • xfa.resolveNode ("pageSet.NameofMasterpage [0].") OverallTop'). border.fill.color.value = "204, 255, 204; green color
  • }
  • If ($(xfa.event.newText) .boundItem == 'Red') {}
  • xfa.resolveNode ("#pageSet.NameofMasterpage [1].") OverallTop'). border.fill.color.value = "204, 255, 204; red color--> that is the same color as above
  • }
  • If ($(xfa.event.newText) .boundItem == "Yellow") {}
  • xfa.resolveNode ("#pageSet.NameofMasterpage [2].") OverallTop'). border.fill.color.value = "255, 255, 0; yellow color
  • }

  I'm not that good in coding, so maybe the code should always get running, but I hope it points you in the right direction.

  Best

  Dietmar

• Using master pages hierarchical - decorations in the templates to be displayed in the foreground

  We followed the directions of the guide online at:

  Use di paginates mastro e addition di intestazioni in Muse

  But unfortunately the master page content remain under the regular page content

  To understand, you have to learn this seeing e oggetti mediante compared it pannello Livelli in Muse

• Violation of State protection session during the creation of master page / retail

  I am trying to create a new master page / detail in Apex 5.0, and at the end of the dialog box, I get this error message:

  Session state protection violation: this can be caused by manually editing the protected page P24_MASTER_PAGE_MODE point. If you don't know what caused this error, contact the administrator of the application for assistance.

  [I am the administrator of the application, and I have not the slightest idea either.]

  The error occurs when I click Next in the dialog Page attributes. The error also occurs in other applications in the same workspace. So I don't think it's important, but I replace the default detail Page number. (The default number of Master Page is grayed out.) In addition, the dialog box layout I had selected... in a table on the same page. I've also specified no master navigation and no reports of master.

  Following archived discussion of v4.1.1, Session State protection violation, I modified a diagnostic query and run the following in my diagram:

  
  

  Select item_id, nom_element page_id, region of apex_application_page_items where nom_element = ' P24_MASTER_PAGE_MODE'

  
  

  I'm not abreast of any application in my workspace with a Page 24 and sure enough, this query returns no data found. Please take note of this before suggesting to change the attributes of the element. I don't know where the item is and not only the database, apparently. Apex seems to think there is - but where?

  
  

  Since an earlier discussion which went nowhere, I crushed my most recent request for export file, but that has not solved the problem. I also went into my workspace apex.oracle and created a form master / detail without error.

  
  

  Thanks for your help!
  

  Obfuscation Express.

  Worsening Express.

  Apex, the product you hate to love.

  It turns out that the dialog box create a Master Page / detail has a Mode option of the Page on modal Page attributes page. I'd be willing to bet, this option is not P24_MASTER_PAGE_MODE. (There is also one for the details of page: P24_DETAIL_PAGE_MODE?) But it has the Normal and gray value.

  It is also now a Select list after my dose; I think it was a type item view only before the fix, which only confirms my thought. I was wondering, which could affect, or enable or disable the modification of the attributes of session state for that element. Model and its theme came to mind, and I remember that I had tried to understand something on a model in the last days, had made a change and tried to cancel it.

  To no avail, apparently.

  Thus, a little more explore new territory, trying to find the modified model and could not. But I read that templates are collected into themes, and I found that I could renumber 26 theme in the application (926). Then make a theme create, from the repository, changing from standard to all themes, click theme 26. Then it was switching themes and rematching models and remove the renumbered theme 926.

  Voila! I can now create a master page / detail without report master!

  Thanks for all the help, with particular satisfaction for Pranav.shah, who was on the train right but don't know which track to take.

• Final result does not match the Master Page

  I'm so frustrated with Muse right now I could scream. I'm creating a simple landing page, a single page, where what little information it is (a graphic background, logo and contact information) is the master. I want to just publish a page that is exactly like the master, but this does not seem possible with Muse. Why is this? What Miss me? If you open the master page and go where the text breaks for mobile display, there is a blue graph that I placed at the bottom to fill in the blanks. Has gone in the final result and the page is excessive in length, I can't change in any way. The master is set to vertical 956px, but the last page is at 1080. There is nothing hidden anywhere on the page or master.

  A zipped file of the site can be found here: Dropbox - AYIN Website.zip

  I would be very grateful for any help anyone could give me, thanks in advance.

  MP

  Hi David,

  Thanks a lot for your answer. However, after consideration and discussion with my client, I think I'll try to rebuild the page from scratch, since it's so simple, see how it works first. I'll get in touch if I'm still having the same problem.

  Kind regards

  MP

• Combo / twisties in the master page footer section?

  HR 2015 (12.0.3.428)

  Windows 7 64 bit

  CHM output

  How to make scrolling text or twisties work in the footer of a master page section?

  We try to add drop-down text menu / twisties in footer of each topic so that our clients can access company, product, technical support of any subject information. To do this, the most logical is to change the master page and add content in the footer.

  We have these main sections:

  Contact the Doc Team

  Documentation PDF

  Support links

  Information about the company

  Product information

  Here is roughly what I want to be like him once that the user he develops:

  Contact the Doc Team

  Send your comments

  Documentation PDF

  Readme file

  Manuals

  Support links

  Technical support

  Forum

  Regional office

  Information about the company

  Address

  Web site

  Product information

  Name of the product

  Version

  Web site

  But when I open the master page in the main editing view, the ability to add the drop-down list feature is grayed out inside HR.

  I tried to create the footer drop-down content in a separate test topic and then copy and paste directly into the master page. HR removes such content from the minute I'm trying to save him, leaving only the related topics. Example of text that is deleted:

  <? HR-droptext_start class = "droptext" id = "POPUP542020552" style = "" display: none; '? " >

  < class p = "footerpar" > Readme.pdf | < a href = "#" class = "footerlink" > LINK

  HERE < /a > < /p >

  < class p = "footerpar" > printable manuals | < a href = "#" class = "footerlink" > LINK

  HERE < /a > < /p > <? HR-droptext_end? >

  Are there workarounds to accomplish twisties on a section of the footer of a master page without using an external .js file?

  I may try a road .jquery if I can't get HR to behave, but would like to just use the page master itself without other files.

  I finally got drop downs working inside a .hts which is then inside the .htt footer section.

  I discovered that the problems in the CSS I posted in the pictures above are attributable mainly from my own CSS problems.

  However, when I tried to add images twistie, bad new...

  Twisties are all or nothing in RoboHelp. You apply all the drop Downs or None.

  That won't work for us, since our footer is a background more dark.

  So I created my own downfall personalized stockings with jQuery and CSS.

  And they worked!

  Well well, mostly...

  Long story short: it has been a painful week and the other half, mostly spent trying to get this .hts of footer to the appearance and behavior of the way I want it too in my chm. I had to do a LOT of trial and error and additional testing to figure out something that works.

  Things I've learned:

  • Square pegs can go in the round holes with a lot of hammering and a lot of mess.
  • CHMS are old. They are not easier to work with when it comes to the use of styles. Many things are not taken in charge you can do in a normal browser.
  • Under the hood CHMS use IE 7, so you have to use CSS that matches that version.
  • You can work around some limitations that HR requires using methods and tool parts.
  • Use a repository. If you make a mistake or fall a path that you want to cancel or put on the shelf for later, you can do it easily. (I'm really happy that I did. I could come and go between my revisions and see what the code worked and which did not easily).
  • In a repository, use a test project that mimics your production project, including the folder structure, but on a much smaller scale you can do faster chm builds. (I got my footer to work Monday, but when I moved it into our real project, the footer did not work on CHMS in subfolders. So I had to build a workaround for this. I would have seen previously had I better imitated my directory structure.)
  • Don't get so sucked into approach that you neglect other tools or methods that might be simpler. (I spent a good amount of time trying to get HR drop downs working in HR footer when jQuery, once I figured how to make, provided a simpler approach.)

  Result of my footer (with custom twisties and drop downs in expansion):

  

• master pages which auto fill?

  Hey guys,.

  We take on the design of a 100 page book for a company that has lost their designers. Anyway long story short, the lap time is fast and are running headers on all the pages that are unique.

  in the master page for the poster "XXXXXXXX" text box headings, borders pages displays the correct title. If I insert a page pages two in-between the head on all pages after my inserted pages back to 'XXXXXXX '.

  At first, I thought it was by using text variables, I myself have never used, but after some research I don't think that it is. Any help anyone can provide would be wonderful.

  Thank you

  -EB

  Master page with XXXX:

  

  Properly an auto populated header:

  

  Header broke once I insert a new page

  

  Looks like the headers are overridden and changed manually on the pages of the document. You can select it?

• Vertical and submenu menu with Accordion for multiple master pages.

  Hello

  , I created a menu and a submenu with accordion, widget, my site has multiple pages and more master pages, how to do vertical menu of the homepage is also a menu of other pages or other master pages, because if I copy the vertical menu object on the other master pages, this isn't the same object, if I make a change in the menu of the a-master I also make the same change to menu b-master , so there is more work to do but there is a big problem for navigation because when I click on a submenu item I change my page, so I load the master page associated with the page loaded years then a new menu now appears as closed and I want to keep open that it was opened when I clicked on the first time.

  I hope that's clear...

  Thank you.

  JC Quirin.

  New: Create a master with no menu and the masters of the child with the menus you need. Assign the child mastes adapted to your layout.

  To create child master pages, create a new master and drag the master parent on it.

  I think, you used an accordion wigget for you the menu. If so, you can open this accordion, as it should be in Design view, in the various masters. It should open in this State, when you open a page using that master.

• Master page is displayed correctly on some but not all

  I had to happen to a few docs lately. I create the doc... and I add an image to a master page. Then, I attribute the master page to some pages. On some, it is fine. But on one or two, the picture does not appear. It shows the right master page. I can entrust other masters, and they are displayed correctly.  This is something I do regularly, and it is a new issue for me. I can manually place the image on the page, but ask yourself why this is happening?

  Thank you.

  OK, sorry, I see that b is the one that should have the background image. This could be a side effect of having a full-spread image (but that shouldn't be a problem in theory). It is often safer than things to stop at the spine. Céline this you in your master by selecting the image, copy, paste in place, and then crop the first folio so the left edge is exactly on the vertebral column and the bottom copy so the right edge is exactly on the spine (and make sure that you check the numbers rather than relying on the alignment). Make sure that you move or copy - just grip resizing and hover over the edge of the image or use the width field in the control panel with all appropriate reference points.