Osprey fisherman-230 Audio Device 1 didn't come out all sounds (Osprey-230 Video Device 1 outputs video though)

Similar Questions

• 9871 cRIO didn't come out

  I have a 9871 module which does not exit when I perform a series of writing. Confirmed with an O'Scope and the command "Read series" which expires.

  MAX indicates the 9871 as being in the systems.

  Project also shows well. But when I run my Labview code he shows as running correctly.

  Did I miss something or make me an effective module.

  I do haveScan engine installed on the system support. And I instaled modules NI 987 x series support on the RIO.

  Any suggestions?

  Thanks in advance

  JPLEng,

  Did you check the connection of the power supply to the module 9871?

• Motherboard integrated audio device missing randomly after turning on the computer.

  Hello

  Old location:

  I recently changed my laptop Elitebook 2540p motherboard. When I installed windows 7 Enterprise 64-bit on my computer the computer lists not all audio devices in the Device Manager page. I checked the bios for all faulty settings and they are all good. Theres no yellow mark in the list of devices is and all the drivers appear to be installed.

  New location:

  Installed windows 7 and computer again found / installed normally audio devices. I tested computer for hours to read the audio data from it and everything worked well. I restarted computer several times / re installed the battery on the computer. A reboot the computers audio button mute fast under the screen seems to be orange and the speaker sound in windows icon has been marked as X I have check the list of devices in Device Manager and there is no audio device listed (no sound device at all). Once I restarted computer and before the computer started downloading windows I pressed the mute button and it turned blue. Then I went to windows and audio devices / audio devices has been registered and work / sound working again.

  Old location:

  I have motherboard integrated IDT audio device.

  When I try to install audio drivers from hp for 2540p site I get "your system does not have the minimum requirements for this patch." And the Device Manager does not list all IDT audio devices.

  I then installed xp, computer peripheral audio IDT normally found and sounds work properly.

  New location:

  After I made the new windows 7 install and all my audio drivers installed / devices showed in the list of devices / audio worked / I downloaded sound drivers driver HP site and install them to the computer.

  Audio problems has not appeared again after my screen mute button HP turned to orange / speaker Windows sound was marked as X / computer didn t found no audio device.

  Currently waiting if the problem happens again and try to think what would cause this (hardware or software problem)? And how to solve this problem permanently.
  

  UPDATE: I have fully charged battery / computer was off while what to do and the problem came back. Mute button fast turned to orange. No audio devices and speakers marked as x. "No audio device installed".
  

  I then installed USB headset and the computer recognizes the and the sounds are use of usb device. Theres still no IDT audio device, shown in Device Manager. Only usb headset work.
  

  Any help for this problem?
  

  -BIOS is updated to the latest version of the HP driver download center.

  -All windows drivers are installed.

  -Bios configured correctly.

  -Reassembled the motherboard and tested all the cables are correctly placed.

  EliteBook 2540p

  Windows 7 Enterprise 64-bit

  Motherboard Info: VB841AV product number

  Product model BU RCTO i7-640LM Mfdf 2540p

  598762-001 MB SYS W/PROC CORE 2 DUO 2.13 GHZ

  P.S. This thread was moved from the company - Compaq, Elite, Pro for laptop - PC Compaq HP ProBook, EliteBook, slate/Tablet PC, Armada, LTE. -Hp moderator of the Forum

  After change of motherboard second the audio computer´s worked well and the audio devices never disappeared from the computer. The first new motherboad that I had and I changed had broken the IDT audio chip.

• No audio device on the laptop

  Hello. Can I have posted this in in the wrong place, but I don't really know what I'm doing when it comes to laptops!

  Recently my laptop is broken (it says summat recently attached a device (which I didn't actually: S)... anyway, I had to wipe everything on my laptop and reinstall Windows everywhere still.) Everything works fine except the noise. When I go to the Control Panel, it says that there is no audio device on my laptop.

  Can someone tell me if there is anything that I can download or purchase for the sound on my laptop please?
  Thank you.
  Natalie.

  p.s. Could keep you things simple cos I don't REALLY know anything about laptops... I'm sorry.

  You must give us a little more information about your problem as your model of laptop, Windows and to this day.
  Did you install the laptop with the Toshiba recovery disc or disc of Microsoft?

  If your laptop has a Realtek sound card check this links:
  http://support.Microsoft.com/kb/835221
  http://support.Microsoft.com/kb/888111

• Portege R700 - Win7 - cannot find the driver for USB Multimedia Audio Device

  Are there any Windows 7 drivers for the "USB Multimedia Audio Device" found on a R700 with the Toshiba Hi Speed Port Replicator II (PA3916U-1PRP)?

  In "Devices and printers", there is a device in the section called a + USB Multimedia Audio Device + Unspecified +. Windows 7 can not find the drivers for it. Audio seems to be working through the port replicator.

  The only related issue I've seen is that sometimes, when I press the "eject" button, Windows complains that a device is in use and the ejection is defective. This is very similar to that reported as ' [Undock R700 question P3838 |]» http://forums.Toshiba.com/T5/General-troubleshooting/R700-undock-from-P3838-issue/TD-p/149453].

  In my case Windows tell me an application to use it or the device in use. I strongly suspect the audio device.

  I have not found a solution so eject manually despite the failure or sleep it and then eject manually. I didn't notice the two approaches being necessarily better.

  HI PeterH,

  Just a simple question: do you use the preinstalled version of Windows 7 at Toshiba and you have most unknown devices in Device Manager or just this USB Multimedia Audio device?

• Satellite A300 - no Audio device installed

  Hey,.

  During the last week, I had trouble with my audio.
  The first incident occurred then that I was browsing the internet, and suddenly an error pops up and off my sound. When I checked for audio devices it says there where not installed and when I checked the Device Manager there is also none installed. I then uninstalled the driver/software from my computer and reinstalled them, but yet the drivers were not recognized. Instead, it there was only a HDMI output driver that would say that he plays sound, but none would come out of my speakers.

  Then I had abandoned all hope and played a video (no sound) when all of a sudden sound began to play off the speakers and all the audio drivers have been recognized.

  Then happened the same incident as the first, and now still can't solve this problem.

  Also mistakes keep coming by saying "Soundchanger.exe" does not work.
  Any help would be great! I uninstalled and reinstalled all the correct drivers and always use system restore, but the sound still doesn't work.

  Hello

  Has this happened with Windows Vista preinstalled Toshiba?
  If yes then I would recommend restoring the operating system using the Toshiba HDD image or the recovery disc.
  I think that it is necessary if the pilot of its installation or update didn't help.

  The new installation of the OS would also be useful to check if this is a hardware or a software only problem.
  Usually after the new installation of the OS, the sound should work fine. But if you this sound issue still appear then a hardware problem could be the reason for that, as mentioned by Akuma.

  I had some problems of sound, but only after the installation of XP_ _Win. Some MS patches that are part of the SP3 has been installed no. and therefore the sound n t function.
  So I deleted the audio driver, installed SP3 and after reboot the new, I installed SP3 and the sound worked again

• missing audio device

  No Audio device installed... no sound, controllers of video game TAB Manager device... Holla at me!

  OK... so... end a month ago, I installed a service pack of windows update. I was was to watch a clip on youtube and all of a sudden the sound went away. And Yes, I have the dreaded X in the lower right corner of my speaker icon that doesn't say "NO OUTPUT AUDIO DEVICE INSTALLED. I did research on all the days from this day and tried everything said worked for them. So far, nothing has worked.

  Tried everything from going into device... Manager who btw I do not have the tab that says "sound, video and game controllers".
  Tried to use system restore... nothing... in fact my computer slower I think
  I tried Windows Live assistant help... He did nothing except told me to restore the system.
  Tried the comprehensive approach of the BIOS, but I'm not that smart with a computer so I really didn't do anything.

  You get the idea... any help would be great... Thank you

  Hi, Wynter-SolsticeCampenrelli,

  Try the David O

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/sound-video-and-game-controllers-missing-in-Vista/5e88fac1-EA14-4DCD-9168-df25464f0f92

  Lost sound in windows

  http://www.computerhope.com/issues/ch000208.htm

• I have a problem with finding a PnP USB audio device when you search for available audio devices.

  Hello.

  I am building an application that can find a PnP USB audio device and play a tone if the device is connected. I am able to search audio devices using "Sound Device Info.vi" of the lvsound2.llb that comes with labview.

  The vi can find the USB device in good conditions, but there are problems - I'll try to describe 2 scenarios.

  1. the USB device is connected before 'Sound Device Info.vi' is called for the first time.

  In this case, the program can find the USB device. If I unplug it, the device disappears from the list of found audio devices. If I reconnect to the same USB port, it reappears in the list. It's all good.

  If I reconnect it however a new USB port, the device is not found. This is not good.

  2. the USB devices is not connected when 'Sound Device Info.vi' is called for the first time.

  "Sound Device Info.vi" is not able to find the device. Disconnect and reconnect does not make a difference.

  I'm under labview 2012 on windows 7.

  I am running the application as an exe to build.

  I call 'Sound Device Info.vi' as a 'call for reference"and the reference is closed between calls to the vi. I was hoping this would unload the dll used in "Sound Device Info.vi" and would solve the problem, but it didn't.

  Is there a way to reset the information usb labview during execution?

  Concerning

  Stephan.

  Hey Stephan.

  The sounds screws require a DLL located in:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2012\resource\lvsound2.dll

  Internally, LabVIEW uses the DirectX API to enumerate devices. The one caveat is that probe us for devices when loading the DLL. We probe not later. So that it works for Bluetooth, USB, fire wire, etc. devices that can be inserted or removed at any time, you control somehow when this DLL charge and discharge. To do this, please see the following document:

  Dynamically that I can load and unload a DLL in LabVIEW?

  http://digital.NI.com/public.nsf/allkb/77594203D78D12278625729100758BE5

  I would also recommend that you provide a Kudo to this idea:

  Updated library lvsound2 (Sound Input/output Sound live) to support audio devices change on the fly

  http://forums.NI.com/T5/LabVIEW-idea-Exchange/update-the-lvsound2-library-sound-input-sound-output-V...

• High definition Audio Device Code 10 - device cannot start (tried all the typical solutions)

  Hey!

  Let me first, I use a laptop Aspire V3 - 772g.

  After the recent update of Windows 10, I had problems getting past the lock screen (took FOREVER to get to the point where I could enter my password) and it had been awhile, so I reformatted ('reset my PC' delete all files) - that didn't really solve my problem, so I used Rufus with an iso of Windows Microsoft to remove all partitions and start 10 REALLY cool. Since then, the laptop runs like a dream - in all but a point.

  It seems that no matter WHAT I do, I can't get my audio HDMI / TV to appear as an option in the playback devices (Yes, disabled devices is checked). Looking in the Device Manager, the high definition Audio Device has an exclamation point is to launch a code 10 - impossible to start the device. I tried to uninstall it, tried to install all the drivers of Intel V3 - 772 f page including chipset, updated my graphics driver / Realtek / drivers Intel HD audio... and yet, nothing. Ran /sfc, ran /chkdsk, nothing.

  I read something that made me believe .NET framework can be part of the issue - and in fact, I have a bit of difficulty getting the 3.5 installed / functional, but I finally did... and yet, nothing!

  Seriously, I'm losing my mind. I'll have to run my sound surround sound via an auxiliary cable into the laptop, which is sacrilege and a fraction of the quality.

  If there is SOMETHING, someone can suggest beyond the foregoing, please do!

  This problem is related to Intel HD audio via HDMI cable, if the driver is in the same package of graphics drivers.

  Have you tried to manually install the audio driver HD?

  you need to unpack the Intel graphics drivers (but no installation, you can use 7z to unzip), and then select update the driver HD audio from the Device Manager and point to the unzipped folder.

• Audio device Help

  Hello

  Recently, I lost the sound on my PC. I have tried many many ways to fix it, but none of them have worked. They have to be costed money, or I didn't have the right tools for the repair. Someone at - there a way to fix the audio device for the sound to come back? I have a Windows Vista PC package of 2 made by DELL.
  Please give me an answer as soon as possible. Include a free way to fix it please. Thank you very much. Bye!

  Hello

   
  1. All changes made to the computer before the show?
  2. Have what troubleshooting measures you already tried?
   
  Method 1:
  Check out the link and follow the steps to solve the problem.
  
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
   
  Method 2:
  You can follow the tips in the article mentioning the link provided.
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• "No Audio device is installed" in Windows Vista.

  Back in September 2011, I lost mysteriously my audio. I have a red X on my "speaker" icon in my system tray. When I put the cursor on the "speaker" icon, I get this message "No Audio Device Installed. I went to HP customer web page and found the audio driver: Realtek High Definition Audio Version 6.0.1.5548 (sp37324.exe). I downloaded the program and recorded on my download folder. I put a shortcut to it on my desktop. The only way I can get sound whenever I turn on my computer I click with the right button on the desktop shortcut and run as an administrator and install the program. Turn on my sound. It works as long as I keep the computer. Whenever I restart the computer I'm back for the red X on the "speaker" icon.

  Now, Windows Update sent me (on 3 occasions the last two weeks) a update "option"... Realtek High Definition Audio. Every time I have download and install and do a restart, but I get the same red X on the "speaker" icon. It's Ground Hog Day!

  My question: is it safe to uninstall the Realtek High Definition Audio driver and reinstall the sp37324.exe without totally send my audio into a black hole? BTW, I don't have a recovery disk.

  I hope that someone on this forum can help me. I've exhausted all remedies.

  Alto! It worked. I uninstalled the Realtek Audio (in Device Manager), did a reboot and the computer does the repair (reinstalled audio) itself. I didn't have to manually reinstall.

  1 million thanks!

• P6 2475 ea no audio device after update

  Hello, my desktop PC HP Pavilion P6-2475EA, AMD A8, 3.2 GHz running Win8 lost its audio after an IDT High Definition Audio Codec update failure. Look in the Control Panel, the IDT device is considered taken ok, if I check the audio devices - there is none. The speaker icon is red with a cross. I tried to reload the original device driver & that makes no difference, I also tried the latest driver - no change. It was working fine until I was invited to be updated - yuk.

  Any ideas - ciao Tom

  You are the very welcome, Tom.

  Sorry, that didn't work.

  Something does not seem just to get a system restore disk error, and now the checkdisk is frozen.

  Unfortunately, I don't have any other suggestions for you to try.

  If the checkdisk remains frozen, you won't the choice but to shut down the PC and see if it will reboot.

  I wonder if it is possible the hard drive failed on you.

• R61i; audio device after loading sp2 May 30 problems

  Friday, May 30 my r61i sp2 downloaded and when sytem restarted my speaker didn't have a red X and a msg no audio device

  found. Also on the keyboard volume controls do not work.

  I am online with the support of mircosoft and with their help reloaded the audio driver and now speaker works, but the keyboad volume keys

  still does not work. My r61i is a cto 8932 with conexant high definition audio - Venice 5045 pregnant.

  Looking for a solution to the volume keys.

  Thank you

  Menche1

  Moderator Note: Type added to the line object for clarity.

  Which driver audio Microsoft had install you?

  I have it does not.  Vista SP2 tries to install an audio driver Conextant HD, but it fails to install.

• No audio device h8-1214,

  reinstalled hardware drivers of Recovery Manager. Device displays IDT High Definition Audio Codec and AMD Manager high definition Audio Device.

  IDT has yellow triangle linked to the message:

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I had tried that but didn't do it.

  Finally resorted to from an Acronis backup recovery. Some tinkering to get back to where I was, but the audio is alive and well.

  Thanks for the post.

• How to reinstall the audio device/program to restore the sound on the computer

  original title: I accidentally uninstalled my audio program and now I can't listen to anything, what can I do?

  My computer has been a little slow so I decided to uninstall some programs. I uninstalled a lot that I didn't recognize. Then, after awhile, I realized that I uninstalled my audio device. I tried to give my laptop a recovery but it did not work = (what can I do? Help me please!

  Hello

  Did you go to the website of the manufacturer of your laptop > drivers and software Section > key in your laptop model number > looking for Windows 7 drivers Audio > download and install?

  See you soon.