OSXRESERVED do not deleted after installing Windows with Bootcamp

Similar Questions

• NDAS services stopped and do not work after installing Windows 8

  Ladies and gentlemen,

  My Services of NDAS stopped and do not work after installing Windows 8. This is necessary to run my SUNGOO LAN hard drive.

  Does sb know what to do?

  Best regards, Rolf

  Hello

  If I understand correctly the NDAS (Network Direct Attached Storage) service has stopped working after the installation of Windows 8. Is this correct?

  Please provide additional information for a better understanding of the issue.

  1 are you faced with the question of the NDAS service on the computer having the hard disk SUNGOO?

  2. how many computers using the hard disk on LAN?

  Specify the computers with Windows 8.

  3 are the computers in a home group?

  Please post the information requested to receive specific troubleshooting steps.

  Other links

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/NDAs-error-wont-see-drive-after-Win7-install/a004b2a3-9dd4-48a1-9ce7-c289931ba17b

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  I hope this helps.

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• Does not fingerprint after installing Windows 7

  I bought 3 items of T500 with installed Windows 7 Home. With this OS footprint scaner worked properly.

  After installing Windows 7 Professinal, fingerprint reader does not work. All instaled divers. There is no error in DeviceManager. But when I run the software of fingerprints, it is said that scanner is not lit.

  Make sure that the installed driver is actually the one that came with the Lenovo Fingerprint Software and not the one that you got from Windows Update. I've seen similar problems several times where Windows 7 is installed and get fingerprints from windows update driver/software and the software Lenovo to fingerprints do not work because some parts of the software, I got from windowsupdate is left on the computer.

  Which version of the driver of the fingerprint reading is installed on your computer?

  You can try uninstalling Lenovo Fingerprint Software and restart. Then, after the reboot if there is still a driver installed for the fingerprint reader in Device Manager, right click and select uninstall and also check the box that says to delete the driver. You may have to restart again. If you had several drivers fingerprint installed you may need to repeat this step twice. So when Device Manager shows the fingerprint with no check reader driver installed if you have any software fingerprint authentec or authentec truesuite installed under "uninstall or change a program". If you find any uninstall and restart. If you can successfully eliminate all the reader of fingerprints in the device should be listed in Control Panel with no driver installed, you should find any substance of fingerprints or biometrics. Then try to install the Lenovo Fingerprint Software.

  -gan

• Satellite P300-1This - Microphone does not work after installing Windows 7

  Hello world.

  At first, I'm sorry for my bad English, so I will say in no time.

  A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

  I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

  Hello

  Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
  Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

  After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.

• My CD/DVD burner does not work after installing Windows 7.

  Hello.

  I recently installed Windows 7 on my laptop (about 2 weeks ago), initially delivered with Windows Vista.

  The facility is perfectly, and I enjoyed the simplicity of the new operating system.

  Everything was going well for about 2 weeks.

  I was able to burn CDs and DVDs.

  But today, when my father asked me to burn a CD for him, Windows Media Player 12 says that I had to connect a burner and restart Windows Media Player 12.

  I restarted the program, which did not work.

  I restarted my computer, that didn't work.

  I uninstalled my CD/DVD burner drivers and reinstalled them back on and I thought that WMP12 had started working.

  But when I put the blank disc inside my laptop and started the burn, my computer gave me a message there was an error in burning the disc, and I had to close WMP12.

  When I got the farm, WMP12 and then tells me to connect a burner and restart the program.

  After that, I looked for the drivers online set to level, or to the bottom of the slope to.

  But none of them worked.

  After that, I talked with a HP technician who told me that it is better to stick to the pre-installed operating system that comes with a computer and not downgrade or upgrade manually.

  She also said that because my computer was made for Windows Vista, it was the compatible operating system for my internal hardware.

  It gives me no drivers or anything to install.

  I should have come to Microsoft first, because now I realize that HP has nothing to do with Windows 7.

  If Microsoft, I ask you:

  When you install Windows 7 on an original Windows Vista laptop and that your CD/DVD writer works for about a week, then it stops working...

  What should I do next to fix this? :(

  Please help ~!

  -Kyo

  Hey Kyo - San,

  Given that the troubleshooter could not see the CD DVD drive, you can try to navigate to the following location in the registry editor and deleted the upper filter and lower filter keys and check if it helps you get the job of CD DVD player.

  1. click on Startand then click all programs.

  2. in the start menu search box type regeditand press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  3. in the navigation pane, locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  4. in the right pane, look for UpperFilters and UpperFilter key and select it.
  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry.

  5. on the Edit menu, click delete.

  6. When you are prompted to confirm the deletion, click Yes.

  7. exit the registry editor.

  8 restart the computer.

  Note: Sometimes, this problem is due to two Windows that have been corrupted registry entries. To resolve this problem, you must use the registry editor to delete the corrupted registry entries.

  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow these steps in the KB Article: http://support.microsoft.com/kb/322756/

  Access the link below to learn more about the CD-ROM drive or the DVD drive that does not work as expected on a computer.

  http://support.Microsoft.com/kb/929461

  Note: the article above is for Windows Vista and the same applies to Windows 7.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Solution Center does not work after installing Windows 10.

  After 10 Windows Installer, Solution Center HP, which is part of the installation of software for my HP Officejet 4500 510nz, tells me that the software is incomplete. The installation disc does not open, so I downloaded the HP program and re-installed. I always get the message that the software is incomplete. HP says they no longer support this printer (bought 24/05/14 - May 25/09/13!) - WOW! ~ printer still print, but will not run the other functions such as scanning, etc., because the HP Solution Center does not start, and HP has abandoned in favor of their product.

  Now what? Should I buy a new printer to replace this year 1 old HP so I can use its features with W10?

  Or, is there a way to fix it?

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

• Keyboard backlit Y500 does not work after installing Windows 7

  Got a y500, love, installed Windows 7 (experience challenging, but glad I did now that it's done). Everything works like a charm, EXCEPT the backlight on the keyboard. By pressing FN + space does nothing. The keyboard does not blink when starting upwards, either.

  After repeated calls to the line of Lenovo, the responses I get are simply: we don't know why the keyboard backlight lights with Windows 7 installed.

  I don't want to go through the hassle to put Windows 8 on just for the backlight.

  There must be a way to activate the backlight of the keyboard while running windows 7. Lenovo, can you please go to the top of the chain of command to those who are working on updates of pilot and see if there is a way to make it work? Or tell me if I do something wrong?

  TL; Dr: keyboard backlight worked while Win 8 has been installed, put win 7 on, is no longer works.

  I would check the cable connections, the most likely problem.

  You can get a new keyboard on ebay for ~ $40... I'd rather spend than that being without my cell phone.

  http://www.eBay.com/ITM/400543129741?ssPageName=STRK:MEWAX:it & _trksid = p3984.m1423.l2649

  If the link does not work, you can search and Y500 keyboard, but others do not look right.

• OfficeJet J4680 all-in-one: J4680 does not work after installing windows 10

  I have recently installed Windows 10 on my Dell laptop.  Yesterday, I was able to print wireless at my J4680 JO.  Today, I tried to analyze, and he is identified as not online.  Can't print now.   I turned off laptop, router and printer and restarted.  I added the latest driver.  Still no luck (in print or scan - still says offline).  Help, please.

  Thank you

  Hi @mlanders55,

  Welcome to the Forums of HP Support! I see that you have problems of analysis, since the upgrade to Windows 10. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  If you have not completely uninstall and reinstall the printer software already, I'd say to start it there first. Here is the link to the latest drivers: OJ_AIO_J4600_Full_Win_WW_140_408 - 5.exe

  You can download and run the print and Scan doctor, he will diagnose the problem and could solve it automatically.

  What were the results when you ran the Print and Scan Doctor?

  I have provided a paper for not being able to scan using Windows 10. If you're still having problems, try one of the applications in step 6 of the document, unless can not analyze after the upgrade, HP printers - printer after Windows upgrade problems 10

  Please let me know the result and if there is anything else I can help you. Thank you.

• Error "no audio device not found" after installing Windows 7

  Original title: no sound
  
  After you have installed windows 7 ultimate in my dell latitude d610, I have no sound. What should I do? He always tells me no audio device found

  No sound

  (1) have you installed the latest audio drivers? If not download them from the manufacturers website or try to run Windows Update - which could include the generic drivers for your audio device.

  (2) you have the right sound device? Click Start, type: sound. Under control panel, and then click sound. Then set the audio device by default.

  More options:

  (3) is the disabled audio device?
  A. right click on the speaker on your taskbar icon
  B. Select "playback devices".
  C. in the white space and blank, right click and select both show disconnected devices / people with disabilities
  D. do you see icons for your speakers and headphones now?
  E. Si you see now you may need to right-click on the correct audio device, and then select "set as default device".

  (4) you can also try the troubleshooter below to discover the connection issues that may exist, the instructions are below:
  A. click on 'Start' > select 'control panel '.
  B. Type of troubleshooting in the top-right search field > select "troubleshooting."
  C. click "Hardware and sound" > select "play Audio".

  (5) also pass through the steps mentioned in the article below - tips to fix common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  This message may also help:

  http://social.answers.Microsoft.com/forums/en-us/w7music/thread/c0f92662-f792-4e4e-B24B-2fae1e52eb7c

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Video quality not good after installing Windows 7

  Original title: videos have lost quality, sometimes plays like 240 p.; videos bluray 720 p does not play smoothly

  I performed a custom installation of windows 7 ultimate (64 bit) of windows xp professional(32bit). Win7 worked well, but when I played a video file, which played very well under xp smoothly with good quality, it is int playing well as it was in xp. some videos that were 720 p bluray (brrip) files do not play smoothly. I also noticed that microsoft had provided me with a graphics card that was previously matrox millineum g series under xp. Sound, video, game controllers also changed the device to microsoft. If a total of 143 recommended updates were automatically installed and verified by windows, I have the problem again. Should I have to install win xp or should I update my graphics device? My custom pricing windows is 1.0.In win 7, internet, videos play very smoothly. Should I try to win7(64bit) to win7(32bit). Thanks for the help.

  Hi Vincent,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, that the video quality is not good after the installation of Windows 7.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.
  What is the number and the model of the computer?

  This problem can occur for the following reasons, the monitor you use and its settings, Windows is configured and discover how you use your computer can all have an effect on display quality.

  Method 1:
  I suggest to run the troubleshooter and check if that helps.

  Open the troubleshooter of display quality
  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  Method 2:
  If the problem persists, I suggest you to install the latest graphics driver on the manufacturer's Web site.

  Check out the link:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:
  If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

  Ways to improve display quality
  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-display-quality

  Let us know the status of the issue after you perform the troubleshooting steps. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• Windows 8 will not start after installing Windows 8.1

  I have laptop with Windows 8 on the drive (C :), I installed windows 8.1 on drive (d). When I want to choose Windows 8, it didn't start!

  There just restart and ask me to choose again.

  I tried "automatic startup repair" with the DVD but it did not work, I tried this command also:

  Bootrec /FixMbr

  bbootrec /fixboot

  bootrec /rebuildbcd

  Hi Michael,

  I would be grateful if you could help me with more information.

  1. What is the error message accurate/complete that you receive when you try to start Windows 8?
  2. Are you able to boot to Windows 8.1 without any problem?

  This problem can occur because of bad sectors on the hard disk. I suggest you run the disk check and check if you can start Windows 8.

  1. Press the Windows key + X, click on (Admin) command prompt.
  2. At the command prompt, type chkdsk /f and then press ENTER.
  3. Now, type chkdsk/r to repair.

  To run the check disk on C drive, try the following steps:

  1. Press the Windows key + E to open Windows Explorer.
  2. Click the drive you want to check (C :).
  3. Click Properties andcclick on the Tools tab.
  4. Click the control button user error checking.
  5. Follow the on-screen instructions.

  Warning of Chkdsk.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• NB305-105 - FN keys do not work after installing Windows 7

  Hello

  I'm trying to install Windows 7 64 bit ultimate in netbook Toshiba NB305-105, I have install all drivers, but I can't solve the problem with the WIFI. In particular I don't found drivers for the special key FN to switch on the WIRELESS card.
  I tried different retraction, but nothing. All the drivers are installed but the FN key does not work and even for the WiFi card.

  Please help me or I come to Windows 7 32 bit?

  Thank you

  Hey,.

  You can keep Windows 7 64 bit installed, but I put t understand why you need 64-bit OS on a netbook that doesn't support 4 GB of RAM

  In any case, the FN keys to install the package of added value and utility to Support Flash Cards. These two tools controls the FN keys. They are not listed for your netbook and Windows 7 64-bit, you can download them from another model as Satellite L500.

  I'm pretty sure, they have too much work for your model. :)

• Buttons do not work after installing Windows XP to A200-1HV access keys above "F".

  Hello again!

  On the 1st sorry for my bad English = (Hot-keys close 'power button' Don't work.) I'm talking about the access key: browser, media, play/pause, stop, next button, the previous button. Are pilots have this key? I don't found drivers on the web page for this key.

  I have legal Windows XP SP3 with all updates.

  Of course you need software. I think that these buttons are controlled by the Toshiba CONTROL utility and you can find it on the download page of Toshiba. I just hope that you have updated the BIOS to the version of Windows XP Home edition. It must be 5.20. To work well WXP you need this version of BIOS.

  By the way: I don't know about you but I believe that SP3 is not yet supported, and I just hope that everything will work well. Otherwise, install Windows XP SP2 home edition. It should work without problem.

  Good luck!

• WiFi not detected after installing Windows 7 Ultimate 64 - bit Elitebook 8740w

  Hello

  I used a DVD to install Windows 7 Ultimate 64 - bit to replace Windows 7 Professional 64 - bit on my Elitebook 8740w. In the end, I used a new facility as the upgrade option ended with a failure error. However, after the clean installation, it cannot detect any wifi. What drivers I am likely to need download and re - install?

  Thank you, in advance.

  Kenwin

  Hi, Kenwin:

  Here is the link to the wireless card driver you need:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4137878&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_108502_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken