OT (slightly): help wanted

Similar Questions

• Stop error 0x0000007e help wanted

  Stop error 0x0000007e help wanted
  Hi ive got this stop error message and don't know how to fix it.

  Ive got a laptop packard bell easynote L4 series. Windows xp service pack 3 on it.

  Windows loads up then restarts to the login page. Ive pressed F8 and disabled auto reboot system fail and get a blue screen with this error message.

  STOP: 0X0000007E (0XC0000005, 0X838B6922, 0XF790B7A8, 0XF90B4A4)

  I can't record in normal mode or windows and nothing happens when you select last good load option restore in F8.

  I can't pretend I do not know how to enter back on win XP chkdisk.

  can someone help please!

  Hi JasonDavies,
   
  Try the methods that are listed in the article given below to resolve this issue:

  How to troubleshoot a Stop error 0x0000007E in Windows XP

• Help wanted | How to increase virtual disk space

  IM using ubuntu as my client machine and esxi 4.1 running on the server dell 2850. My image is initially sized like 15 GB, but I want to expand to 100 GB, which is the amount available in the actual physical drives attached to the server.

  If I try to change the disk space by changing the settings it does not change the internal space used by ubuntu. ?

  Can someone help me how can I change the settings for the virtual disk grows as the capacity of the physical drives increases?

  Thank you

  If you originally created a thin provisioned disk then it will behave as you describe, but you still need to expand the space inside your file of Ubuntu system using gparted. Download the live CD of gparted.

• Help, wanted to make an interactive 3D with Flash cs5 and 3Ds Max

  Hello, I'm newbie here. I just want an interactive 3D with flash.
  But I'm stuck with the plugins and the steps.
  Some tutorials, said using away3D, but the steps are too complicated, and it using flash builder too...

  I found a plugin he called Swift3D Max, but there is no tutorial for it.
  What is the best? Please help me.

  Yes, you can display a 2d object only when you click on a 3d reveal oppose.  you will need to code for him to appear and to be handled.

• Mixer automation modes help wanted please.

  I asked this to the thread in the Forum of the hearing (no response).

  so... because the same question applies to the mixer BODY

  Anyone who is willing to help me get a better understanding of the modes of automation in Audition 3 (or agency) please.

  for example. specifically when using the lock, Touch, writing.

  The manual is a little thin on information from real workflow in this regard.  (I'm a cameraman not sound engineer!)

  I have a session with 10 tracks.

  I expect to work down through the slopes by using automation, as I go on all of them gradually.

  Which method is best to use in order to repeat and edit a section of a track?

  Can you erase complete automation in a track?

  It is recommended first to set each track to the unit?  (I have a few envelopes clip nec already melted)

  Appreciate any assistance. Thanx

  Hello

  Here is a quick review of the modes of automation:

  WRITING: Writing Mode overwrites all the data automation.  If you have several nodes in an envelope and start reading in write mode, the envelope will be erased for throughout the region of reproduced and replaced by values current or new settings.

  LOCK: Latch Mode honor existing Automation data UNTIL you make a change to a setting.  At this point, the envelope will be blocked to the new value, crushing the other keyframes or changes in the region of reproduced.

  TOUCH: Touch Mode is similar to the mode of locking in her honor existing Automation data until you make a parameter to change.  However, once you change a parameter value, touch mode automation will then begin to adjust the envelope slowly to the NEXT keyframe value.  By example, if you have a keyframe at 03 seconds and another 15 seconds and start reading in Touch mode, if you perform an adjustment to 5 seconds, then release the command, the envelope will slowly return to 15 second parameter value within the following 10 seconds.

  To change a section of a railway, use the appropriate mode for what you are trying to do.  If you want to replace everything in the area, use Write.  If you want to replace SOME of the automated system, use the latch.  Use Touch if you want to only want to modify some aspects of the envelope, but not necessarily all.

  To clear a track of automation of all keyframes and reset it to its default value, there is a button gum in the track automation on the left panel.  This will be clearly all the mount points.  To remove a point of editing simple, click and drag outside the automation track (upwards or downwards) and it will be "photograph".

• diskimages-helper wants to make changes...

  Hello world

  I'm making images of dmg to my old CD collection for archival purposes. I use disk utility to create (cmd + alt + n) images. Whenever I do this diskimages-helper request my password admin before she continues to create the image. I guess it has something to do with assembly/disassembly and the necessary privileges to do this.

  Is there a way I can avoid this dialog box?

  Try to create the disc image on your desktop.

• Help wanted with cell to daq wiring and grounding

  Hello

  I am acquiring data to a load cell using a NOR-USB-6211 OEM Board.  Under certain conditions, I see big spikes in the data that I think are caused by noise.  The DAQ card also produces an analog signal 0 - 10V for a controller of AC actuator to control its output. The current configuration is:

  Analog input: load cell Novatech wired to a Novatech "LMS" (strain gauge amplifier).  Output 0 - 10V of this amplifier is connected to terminals GND AI on the map and HAVE 0.  I use CSR configuration.

  Link to CMS Manual [url]http://www.novatechloadcells.co.uk/pdf/sgamanual.pdf[url]

  Analog output. Son connected to terminals GND AO and AO 0. Configuration of terminal CSR.

  I have attached a diagram of installation

  I understand that the GND AO and AI GND terminals are connected.  My concern is that little noise is created by AC motor controller, and it interferes with the action of the load cell. Can is this possible and if someone suggest a better configuration to avoid this situation if so? I think that at some point, one of my negative wires must be based, but I don't know which.

  Thank you very much.

  John

  OK - Thanks for the quick response. Tomorrow, I will try to acquire the load cell data using Different configuration. Perhaps this will help you reduce the noise.

  see you soon

  John

• Help: want to know the user who performed my procedure

  Hello

  My oracle db: 11g

  (1) I have a p_display_name of the procedure in the demo of schema.

  (2) that I've granted execute privs to the test of the user on the p_display_name procedure

  (3) now I want to have a dbms_output.put_line statement that displays the user running this procedure p_display_name

  PS: Yes I can do this using select USER in < a_local_variable > of the double, but I'm looking for an alternative method, I want to say I don't want to use sql in this case just want to use plsql for this information.

  (2) if my question isn't clear apology, please let me know

  Concerning

  Rahul

  No need to choose... what

  dbms_output.put_line(user);
  

  ?

  see you soon

• Memory of blackBerry Smartphones and apps problems - help wanted

  Hello

  I have the Blackberry Curve 9300 using the software v6 with card memory of 32 GB formatteed aa.

  When I download apps, they go to the memery phone rather than on the map.

  What I need to know is:

  1. How can I download an application directly to my card rathr memory the phone?

  2. How can I transfer exisitng apps on the memory card?

  Thanks in advance

  Marek

  Well, I'm really sorry that I have to say NOT to do this... you can not install or you can't move applications to the MMC storage...

  also, see these discussions if you don't know what I mean...

  Link 01

  Link 02

• Help Wanted: Recovering from loss of HP Recovery Partition files

  Let me start with an explanation on how I lost my partition (go to the next paragraph, if this information is not required) up to March 2010 is coming up soon and so is the date of expiry on the Windows 7 Build 7100 (RC). So I restored my system back to factory conditions. When I pressed F11 I say a lot of options but the last two had confused me. An option said to recover as long as the plant, the other of the said Reset. I chose Reset (must choose the other), and when Vista Premium of hope was finished reinstall, I found that my labeled "Recovery" partition was almost empty. It says "6.19 GB free of 6.25 GB" (http://i48.tinypic.com/1zmguw1.jpg) so about 60 MB is used even if there is no visible (or hidden) file during navigation.  End of the story.

  Now, here's what I have. I have the recovery disks HP Recovery Manager asked me to do the first day. And I have this almost empty partition, the recovery files used to be on. Did not fit or did something else with him.

  ONE QUESTION: is it all similarly to recover the files from HP on the recovery Partition recovery using the above discs?

  I realize that I don't have partition and disk, that alone is sufficient. However, CD and DVD scratches easily, there is no real not a guarantee I'll have my safety with me NET. This is why I am no longer comfortable with 2 forms of file recovery. And so I ask above is impossible to do on the assistance of my own without HP (which is not free)...
  
  TWO QUESTION: can you copy an ISO image recovery discs and then burn that ISO (s) on a DVDs to make new copies of the old recovery discs?

  I thank you in advance for any comments incase I don't answer, and sorry if this isn't the right sub-forum relating to this topic.

  Not sure what happened to your recovery partition, usually it is recreated during recovery.

   

  As for making copies of all of the recovery, it's a very good idea. They can be copied directly with many CD/DVD burning applications, or converted to ISO for burning.

• Fluid - animation of a chart of water dynamics. Help wanted please

  Hoping someone can advise a way to animate a graph of water so she waves in a wave motion easy to please.

  The graph illustrated is a PSD layer with transparency. He appears as a third kind of low

  

  I'm experimenting with the effect of progressive mesh, and it looks promising so far.

  I was wondering if there is an easier way?

  I was also wondering if there is a way to make it look more liquid as well.

  Would have been my first choice for this particular image. Second choice... an aquarium, a piece of soul foam and a camera.

• Help wanted with the footer coding.

  Hello

  On my site

  http://www.vakantiewoningeninsuriname.nl/Prijzen.html

  Ive has add another block. But the problem is on some kind of reason end up in the foot. also the very large foot of page estmaintenant... It should look like

  http://www.vakantiewoningeninsuriname.nl/contact.html

  Anyone know where and how can I change this?

  Concerning

  You must move both

  blocks, you have added in the

  container.

  Best way to do this is to click anywhere inside your design in Design view and look for the selector along the bottom of the Dreamweaver design window. Click it and you should see a blue line in the design window which indicates where the container ends. If you switch to code view, it should be noted the block, scroll the code so you can see the end

  tag.

  It will look like at.

  I'd put a comment by closing it

  so it looks like:

  Now, go into design mode and select

  that encapsulates the image Huize Henriette named 'full_portfolio_frame '. Look at the bottom of the design window and select that should be to the left of

  Switch to view the code and cut all the code highlighted the comment (which will not be highlighted)

  

  Paste the code directly before the closing

  tag for the container of "primary_full".

  Now you the code looks similar to below:

  

  Who moved the image where it should be.

  Return to design view, click to select the

  "one_half_last", switch to the code view copy the code highlight and paste it again before the closing tag for the container of "primary_full".

  Which should solve your problem.

• Snow effect Help Wanted

  Hello

  Can someone point me in the right direction for a How - to on the creation of particles fall (as in a kind of effect snow storm)?

  I am very new on board, the years of working with Flash and am struggling with differences of coding but actually eager to learn. I spent a lot of time trying to adapt some code 'mousetrail', but I'm not quite up to the task yet (too big a jump for me at this early stage - I started wading quickly ).

  Advice or opinions - or links to things similar-ish that I might be able to draw lessons - will be very welcome

  Thanks in advance,

  Frannie x

  Here's a good response with the source files: http://forums.adobe.com/message/5891833#5891833

• Help Wanted on Sys_context

  They told me that when we use the context, does a link for the next call sql performs a soft analysis
  
  create or replace function fn_temp (AB in NUMBER)
  RETURN VARCHAR2 IS
  V VARCHAR2 (100);
  V1 NUMBER (1);
  X 1 VARCHAR2 (100);
  Start
  V: = 'SELECT MODEL WHERE DOUBLE D1 = 1';
  V1: = AB;
  DBMS_SESSION.set_Context ('p1_cont', 'v_value", V1);
  V: = REPLACE (V, 'D1', SYS_CONTEXT ('p1_cont', 'v_value'));
  DBMS_OUTPUT. PUT_LINE (V);
  IMMEDIATELY RUN V IN X 1;
  DBMS_OUTPUT. PUT_LINE (X 1);
  RETURN X 1;
  end;
  
  create or replace context p1_cont using fn_temp;
  
  
  Select sql_id, prev_sql_id from v$ session where upper (program) like '% of TOAD' AND OSUSER = "prnarvek."
  
  SELECT fn_temp (2) FROM DUAL
  
  SELECT fn_temp (1) FROM DUAL
  
  Select * from v$ sqlarea where UPPER (SQL_TEXT) AS "SELECT DUMMY FROM DUAL % ';
  SQL_TEXT SQL_ID
  
  SELECT a MODEL where DOUBLE 1 = 2 3as9g8xuqc4qc
  SELECT a MODEL where DOUBLE 1 = 1 6f1m2mcgc88mt
  
  
  So, what is the context? Or told me wrong or I m a bad thing...

  Hello

  in your procedure, you change the value of sys_context. Your call to c1 should look like at the end:

  SELECT DUMMY FROM DUAL WHERE 1 = sys_context('p1_cont','v_value');
  

  In this way he uses it as a bindvariable. So, in your procedure you replace, you need some additional quotes, if you replace the string, not the value.

  Herald tiomela
  htendam.WordPress.com

• You want to clean install Windows Vista. Can I download media Dell supplied with my machine?

  Help - want to start again.

  I have a Dell XPS630i with Windows Vista. I can't go online. I got a blue screen saying crash dump. Turned it off. Same thing is back. Finally, I came home and I can't get online.

  I want to just start over completely. How to clean and reload the discs and the Vista from Dell. I've got it all. I have back ups of all that interest me.

  Please help me!

  Thank you

  Ann Bush

  Email * address email is removed from the privacy *

  Hello

  Here's how to reinstall Vista with the Glens recovery Partition (if available to you):

  "Restore your software Computer´s factory settings."

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  And this is how to use recovery provided Dell discs:

  "Manually reinstall your Windows Vista operating system"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  If necessary (if you have problems with discs), call Dell and ask them to provide you with a set of recovery disks Vista.

  They do it for a small fee.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.