NDG and problems of Group of users

Similar Questions

• 50G and problem with integrals, new user.

  Hello! I am a student in electrical engineering and I bought a 50G as my first graphing calculator, since that's what most teachers recommend here. I have colleagues who use the same who also make things a little easier, but I have almost no experience with it.
  I serve the 49G and first emulators recently so get used to RPN, and while the first gives me the right answer, my physics 50 G and the emulator of 49 G give me something weird.
  
  Well, if I'm trying to incorporate "exp (x ³) dx" for example, the calculator gives me "exp (x³t) dxt" on the screen.
  
  Most of the integrals worked out of the box, but some have this exact same behavior.
  
  Because the emulator of 49G and 50G physical give me the same thing, I suspect that it is just a matter of configuration. First emulator gives the answer however.
  
  Here a few photos:
  
  
  
  Then request EVAL:
  
  
  
  And 49G emulator:
  
  
  
  Thanks in advance, any help is appreciated.

  Hi!, JVChrisostomo:

  IMHO, you need use the RPN MODE.

  Configure...

  Number format... Difficulty 5

  Flags

  01 main value

  Function 03-> num

  Mode approx. 105 on

  Use EQW...

  The result is... 5.96394E91 or 5.96394 x 10 ^ 91 (takes approx. 7 "with EVAL)

  Check, using Wolfram closest to you. Alpha interpretation:

  final integral(e^x^3,0,6)

• Problem of GANYMEDE ACS 4.2 NDG and shell permission sets

  Hi all

  I am trying to solve this problem without success so far. I have fresh GBA 4.2.15 patch 5 ACS installation and I am tryng to deploy to our environment. So I configured a 2960 S to be my test client and everything works well. Problem is when I try to create strategies to fine grains using groups of network devices and shell permission sets.

  I created called ReadOnly and FullAccess authorization of shell games. I also created NDG called FloorSwitches and added my 2960. I have 2 groups of users called FloorSwitchesReadOnly and FloorSwithcesFullAccess. Now, if I have set up a FloorSwitchesFullAccess group and assign the set of permission controls Shell by NDG and then log in to the switch, all my orders are rejected as unauthorized.

  One thing I noticed, is that if I give the command shell permission set it to any device (in the settings of user group) works fine. Or if I create binding with DEFAULT NDG to the Group of users that works too. My conclusion is therefore that the ACS for some reason any does not associate my passage to correct group but is instead the DEFAULT group for some reason any.

  Someone at - it had the similar problem, or is there something I'm doing wrong? Is there another way to achieve such a thing without use of NDG?

  Thank you all...

  Please upgrade to patch 6, there is a bug in the patch 5 and you can see the release notes or the Readme for more information.

  Which is the user setting on while you test command authorization, do you have it set on the group setting?

  Thank you

  Tarik Admani

• user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  WinXP
  user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

  I did a gpupdate/force and restart twice PC
  Yet, user indicate it is always admin when we right click on Start menu and see the possibility to open all users

  Hi elena_ad,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en/winserverManagement/threads

• Home page by default for OBIEE 11 g based on the users and the wise group

  Hi all

  I'm using OBIEE 11 g.

  I need set the page default dashboard for the user and the wise group.

  EX:

  User1 is belongs to Group1 and Role1 - they need to see the default homepage as Dashboard1.

  User2 is belongs to the Group 2 and Role2 - they need to see the default homepage as Dashboard2.

  Kindly guide me to achieve.

  Please answer as soon as POSSIBLE.

  Thanks in advance.

  RR

  It is generally considered poor form to scream as soon as POSSIBLE to a question. http://www.CatB.org/ESR/FAQs/smart-questions.html

  As far as your question goes, it is that the CHEMINPORTAIL variable is for:

  http://docs.Oracle.com/CD/E23943_01/bi.1111/e10540/variables.htm#i1013436

  OBIEE - system (reserved variables) session variables | GerardNico.com (BI, OBIEE, data warehouse and OWB)

• View of VM, linked Clones and Thinapp to a group of users?

  In our configuration of the display, I have a pool of 80 people, some users have asked MS Visio.

  I created a package of visio and wanted to deploy to a group of users, but I can only assign to a pool.

  Is it possible so I can assign MS Visio only to a certain (AD) Group of people without having to create an additional pool?

  For another application, I use the security feature in the application thinapped, which do not allow users to start the program and again reports an error message. It does not work with visio propperly: a user with visio can open files visio very well with the editor, a user without visio should get the (internet Explorer) visio Viewer, but the application is launched instead (which restores the safety message and the user cannot view the visio file).

  In theory if you added it to a pool only people within the security group would be able to access.   You can also use a login script register which means that it could only be saved for those who can visit his profile.    See the link below for example sript login.

  http://blogs.VMware.com/ThinApp/2008/10/ThinApp-thinreg.html

• I have 1 computer and I'm the only user - why are multiple users?

  Hello

  I don't know much about computers and terminology.  BIG PROBLEM.  I'm the only person on my computer, I'm not on any kind of 'network' or 'homegroup '... I constantly have problems that lead me to believe that someone has hacked my computer.  I honestly don't know how anyone could do this, but I have a few very strange settings, and I can't change!

  Under group or user names there are 4 names.  That's what I don't understand.  Should not be a single because I'm (or should be) the only person who has access to my computer?

  There are very suspicious files, folders and stuff on my computer and I have noticed in My Documents folder, there are a lot of files known as JScript Script file (js).   I have hundreds (or thousands) of strange files and folders I can't open or delete!  I can't believe that this is normal!  I have Norton and scans lift you own.

  I am extremely concerned because there is no one in my life, 'A', who has been personally harassing and stalking me for over a year.  I have received and continue to receive hundreds of pornographic and annoying emails (sent in an anonymous way), I am constantly being registered for most pornographic sites, and the list goes on and.  She has even copied pictures of me to my websites legitimate and used for its own purposes - essentially to embarrass me.

  This is driving me CRAZY!  And Yes, this person has always been incredibly hateful and full of a strange kind of "vengeance."  The police are without help.  The district attorney has been without help.

  My basic question is - am I paranoid, or is my computer to access remotely?

  I'd appreciate any help, comments, opinions, and others.  Thanks in advance.

  Here's how you can run a robust show:

  • Guest account . Keep him inactive.
  • Account named 'Administrator' : keep it inactive. It is too easy for hackers to guess.
  • Your own account : keep active and use a non-empty password. Some people recommend that there not administrator privileges. Mine is but then I practice "Safe Hex" (see below).
  • Save the account : every day I deal with messages from people whose password no longer works for some reason any. They are locked permanently from their computer. Have a backup with privileges to administrator account, it's a very easy way to work around this problem, as long as you keep a paper of the account folder.

  About your computer after having been hacked: it's impossible for me to say. You must have machine examined by an expert. If you have reason to believe that it has been hacked, then you must format the disk and reload Windows from scratch. The following measures would make it virtually impossible for a hacker to access your machine:

  • Use a hardware firewall to your Internet connection, such as a router.
  • Keep your Windows Firewall active at all times.
  • Keep your scanner active virus and up to date.
  • Be careful with attachments, especially those from strangers. They might be infected.
  • Even for drives flash you receive.
  • Be careful clicking on links on suspicious sites, especially those associated with pornographic, gambling and high pressure, selling content.

• Problems connecting to AD users

  Hello community vCAC.

  I have install a POC vCAC to test the product that we plan to implement this by replacing the vCD. I vCAC 6.0 device, device of IDM and IAAS component configured server. I created a new tenant and created a new source of identity with our domain na.test.com and the alias is testmtn. I gave the tenant Admin and Admin Infrastructure access to group our team. However, none of them seem to be able to connect except me. When I login it takes me back and I can create endpoints and vCenter point and perform data collection. But none of them can log into the application.

  When other users try to log in, it tries to load something for a while and returns to the login screen. I know not if you call that an error of 'Submit' but there is no error message what so ever.

  Did anyone experience the same problem before? VMware support seems also to have a solution yet for this. Among the representatives was told that he faced a similar problem in his lab configuration and he had to rebuild the lab and it worked. Which is not a solution for me... What happens if I set up in production and if a set of users can not connect and Vmware asks me to put in place from the start? Need help with this.

  Please help if someone has faced a similar problem before.

  Kind regards

  VMSavvy

  I had to deal with this and we have to make this work was to use a global catalog server for the source of identity over port 3268.  We had groups that were part of groups with thousands of users who have caused the header to be great.  6.1 solved this for us, but we had to change the source of identity, as mentioned above.

• Restrict the metadata field during an update to a specific group of users

  Hi all
  
  I have some difficulty to find the best way to restrict permissions to change some fields of metadata for 2 different groups of users.
  
  I have two user groups, A and b. Group A will check in the documents that group B will then review for accuracy and quality. Group B will then update an optionlist field called "State" with "recommended" or "not recommended".
  This is not a situation of workflow as the scope requires that all documents are immediately available for research. I currently have a profile CheckIn and search for content to read write access for both groups A and B. The 'Status' field is hidden on the page of CheckIn. Can someone please suggest a good way to limit the 'Status' field on a page to update users to simply "B"? Groups A and B must be able to update all the fields except for the limited B field "Status".
  
  Thank you!
  
  Published by: user6750815 on June 2, 2010 16:11

  Hey rMac,.
  I understand in this way you have a profile for A and B groups of users. On this profile status field is hidden.

  If this is your problem, you can the two-step approach, while making the rule in order to hide the status field, use the activation of rule condition. Make active only for users with A role. This way even with the only profile some of the user with the role B will be able to see the status field.

  Alternatively, you can put a similar code to restrict the link of personalization where you make this hidden field editable and mandatory for users in B.

  see you soon,
  Sicard

• I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

  I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

  It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.

• "cable fraying problem" faced by many users of MacBook?

  Mr President, what is the efficient solution for "cable fraying problem" faced by many users of MacBook?

  Two options

  1. I have the cables of 2010 - as long as they work - I use a couple of rolls of tape - the spell used to dress wounds - to wrap around and cover the scuffs even at a crossroads - helped me to increase the useful life

  2. you always have the option of replacing them with an MFI certified cable (I got to be a good salesman for Monoprice)

• Problem of Skype calls groups calls problem/video group

  Hello

  I use Skype on Samsung Galaxy A5 (A500FU) and I can not start a group call / or call groups like the button 'call' in the upper right corner is missing. Same problem with group video calls (call button is missing).

  I use the latest version of Skype for Android - 6.33.0.575

  Any ideas?
  
  Thanks in advance

  Skype has solved the problem in version 7.01.0.669 of 31.05.2016. After the update the Group calls (video & audio) work correctly.

  I must say that I am really impressed with their customer service. I explained the problem in detail and in the next update, the problem has been resolved. All people using Skype on Samsung Galaxy A5 will be very happy

  Thank you

• What happened to the Mindshare program for groups of users?

  He was interrupted? I can't find any information about it anywhere... I was the administrator for our MU and received no word on his status.

  Visit the website here http://www.ineta.org/UserGroups/FindUserGroups.aspx
  and see if there are groups of users in your area.

  Otherwise, the forums Microsoft Answers has no additional information on MindShare user groups.

  Thank you

  Marilyn

• I don't remember the password for my network, but I do remember the password for my computer and my home group.

  I don't remember the password for my network, I remember the password to my computer and my home group, they are all different to change that, but family crisis distract me unable to use my ipad now or my other computer help!

  original title: password

  Hello

  What operating system is installed on the computer?

  Perform the steps mentioned below, if you have Windows 7 installed on the computer and see if the problem persists.

  a: right click on the wireless in your taskbar icon.

  b: open network and sharing Center and then click manage wireless networks on the left.

  c: you will see all the networks you have connected too.

  d: right click on any connection to Properties.

  e: click on the Security tab that shows the details of the security of the network including the password. Click on the box to Show characters.

  Hope this information helps.

• Cannot connect to my admin account and cannot change my standard user to the admin account

  I have 2 log ons, as administrator and the other is a standard user. Something happened that doesn't allow me to connect to the admin. Profile, but I can't the standard user and when I go to user accounts and you're trying to change that one to the admin. privileges, it doesn't let me change the account type. I recently purchashed Defender Pro 15 in 1 more all-inclusive anti-virus. Previously I was using Avira Antivir free House as my anti virus with no problems for a year or two, but then this happened if I installed the Defender but I can't access to half of what I need to do is no not Admin, any help would be greatly appreciated!

  Hello

  did you uninstall Avira before installing Defender Pro?

  2 aVs installed will cause blockages of the system or problems

  "Something happened that doesn't let me log on.

  and you don't give an error message on your admin account opening

  We need error messages to help you

  Uninstall Avira or:

  try a Safe Mode system restore to before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.