Other line shading in the Pages

Similar Questions

• 5610 all-in-one - black thick top of line down on the pages scanned using the scan feeder tray ONLY

  Using HP Officejet 5610 all-in-one I've had for years and maybe 6 months ago, I noticed that anything that is analyzed by the load plate (if you need to scan a bunch of pages without having to analyze each page individually between analyses what is tedious that need constant attention) has this thick black line goes up and down on the middle left of THE pages scanned. Honestly, it looks really bad like if there is something hidden in this terrible line through the process of moving the paper through the feeder, BUT the original is just fine without damage.

  If I scan just a page by placing the document on the scanner glass, and then NO matter whatsoever.

  100% reproducible every time.

  So I know that it has nothing to do with the glass (which is clean), but only when the scanned document must pass through.

  Checked the forums for similar problem and found no exact match.

  I imagine that an expert out there knows the answer to that high hand. IF you could speak up, I would appreciate it.

  I THOUGHT ABOUT IT!

  I read another post:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-OfficeJet-Pro-8500A-plus-vertical-black-lines-only-when/m-p/1391261/highlight/true#M30268

  who is mentioned on opening the ADF cover. Well I opened the whole Assembly, having absolutely NO idea how it all works, and I found a 1 "x 8.5" thick mirror (for lack of a better term) who had what looked like white paint on it to the place where the pages were probably getting the black line. I scratched, retested and the question was gonzo - that's all!

  Then my wife just told me that she thinks that she knew what the problem was all along. She had put on a page and it had not dried, and she tried to put it in the charger to make a copy. She just thought that we were going to replace the printer even when and if ever, let me know. During this time it was me mad for months. What are you laughing at me? This all-in-one works very well for years - replace without good reason, must learn a new product, get new cartridges, out the same old, same old, NO way. If it is not broke, do not replace it!

  Detective Conan.

• Purple vertical lines on all the pages of a book chapter?

  Aloha,

  I'm stumped on this one, I have a mac and I'm on Indesign Cs6. I created a new model for a chapter of a new book and 38 vertical purple lines appeared.  I tried to 'remove all grids' I can zoom out and move them to the top 10 in the centre but it's all in movement. I looked in preferences and even the editing of the page, and I have not found something that corresponds to that.  I read a few posts and tried to command + option + shift, but that did nothing.  Can someone help me on this one, it is a little to circumvent madenning.

  I took a screenshot, here's what it looks like.

  Mahalo and thank you,

  Rose

  It seems that you set up the page with a bunch of columns.

• Problem with PPR in a table advanced with the insertion of several lines in create the page using 'add a new button '.

  Hello experts,

  I created a page that contains an array of advanced, 6-7fields (including a poplist column)

  Whenever I have add a new using the line add new line button, I get a null pointer exception.

  Code in Scenario1.

  
  

  Public Sub handleCurrencyChangeEvent()

  {

  PVO OAViewObject = (OAViewObject) findViewObject ("xxCurrencyPVO1");

  Line OARow = (OARow) pvo.first ();

  OAViewObject dtlVO = (OAViewObject) findViewObject ("xxEcreditCardDtlVO1");

  OARow dtlRow = (OARow) dtlVO.getCurrentRow ();

  String currency = (String) dtlRow.getAttribute ("CurrencyCode");    / / NULL POINTER EXCEPTION

  If ((currency == null) |) ("AED".equals (currency)))

  {

  row.setAttribute ("ExchangeRateTypeRender", Boolean.FALSE);

  row.setAttribute ("ExchangeRateDateRender", Boolean.FALSE);

  row.setAttribute ("ExchangeRateRender", Boolean.FALSE);

  }

  on the other

  {

  row.setAttribute ("ExchangeRateTypeRender", Boolean.TRUE);

  row.setAttribute ("ExchangeRateDateRender", Boolean.TRUE);

  row.setAttribute ("ExchangeRateRender", Boolean.TRUE);

  }

  }

  Public Sub initPVO()

  {

  OAViewObject appPropsVO = (OAViewObject) findViewObject ("xxCurrencyPVO1");

  If (appPropsVO! = null)

  {

  If (appPropsVO.getFetchedRowCount () == 0)

  {

  appPropsVO.setMaxFetchSize (0);

  appPropsVO.executeQuery ();

  appPropsVO.insertRow (appPropsVO.createRow ());

  Line OARow = (OARow) appPropsVO.first ();

  row.setAttribute ("RowKey", new Number (1));

  }

  }

  handleCurrencyChangeEvent();    / / If I comment on this call, there will be no null pointer when I click on the button Add a new rank and PPR will not be the first line when I select the poplist.                 

  }

  Public Sub createDetailRow()

  {

  String hdrId;

  OAViewObject hdrvo1 = (OAViewObject) getxxEcreditCardHdrVO1 ();

  OAViewObject dtlvo = (OAViewObject) getxxEcreditCardDtlVO1 ();

  Initialize and create a line of VO

  If (! dtlvo.isPreparedForExecution ())

  {

  dtlvo.setMaxFetchSize (0);

  dtlvo.executeQuery ();

  }

  Line dtlrow = dtlvo.createRow ();

  dtlvo.executeQuery ();

  int count = dtlvo.getRowCount ();

  dtlvo.insertRowAtRangeIndex (count, dtlrow);

  Development of the sequence for the number of request *.

  Number of dtlseq = getOADBTransaction () .getSequenceValue ("xxdm. XXDMI_ECREDIT_CARD_DTL_SEQ");

  hdrId = hdrvo1.getCurrentRow ().getAttribute("CreditCardHdrId").toString (); mind vo

  dtlrow.setAttribute ("CreditCardHdrId", hdrId);

  dtlrow.setAttribute ("CreditCardLineId", dtlseq);

  dtlrow.setAttribute ("LineNumber", count + 1);

  End of sequence generation *.

  dtlrow.setAttribute ("CurrencyCode", "AED");

  String currency = (String) dtlrow.getAttribute ("CurrencyCode");

  System.out.println ("CurrencyCode:" + currency);

  dtlrow.setNewRowState (Row.STATUS_INITIALIZED);

  } / / end createDetailRow()

  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)

  {

  super.processFormRequest (pageContext, webBean);

  OAApplicationModule am = pageContext.getApplicationModule (webBean);

  Event string = pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM);

  * Treatment add line button *.

  If ((ADD_ROWS_EVENT. Equals (Event)) & & "AdvTblRN".equals (pageContext.getParameter ("source"))) ".

  {

  am.invokeMethod ("createDetailRow", null);

  am.invokeMethod ("initPVO");

  } //**End add row button *.

  otherwise if

  ("currCodeChangeEvent".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM)))

  {

  am.invokeMethod ("handleCurrencyChangeEvent");

  }

  ===========================================================================================================================

  Could please help what is wrong in the code, I followed all the steps as stated in the guide, but the table advance, the problem starts whenever I click on the button Add a new row for the creation of new line.

  I couldn't understand what was wrong with the code.

  Thanks in advance,

  Suman

  Suman,

  A few points:

  1. Why do you call handleCurrencyChangeEvent in the event to add a line? Simply set the useful, likely of the values in the line it himself.

  ex:-instead of calling the handleCurrenyChange method, simply add the below lines inside the createDetailRow()

  dtlrow.setAttribute ("ExchangeRateTypeRender", Boolean.FALSE);

  dtlrow.setAttribute ("ExchangeRateDateRender", Boolean.FALSE);

  dtlrow.setAttribute ("ExchangeRateRender", Boolean.FALSE);

  2. it looks like you have on the field of the currency and that fireAction handleCurrencyChangeEvent action method is called, right?

  Instead of using dtlVo.getCurrentRow, use the code below:

  public void handleCurrencyChangeEvent(String eventRowSourceParam)
    {
    OAViewObject pvo = (OAViewObject)findViewObject("xxCurrencyPVO1");
    OARow row = (OARow)pvo.first();
  
    OAViewObject dtlVO = (OAViewObject)findViewObject("xxEcreditCardDtlVO1");
  
    //OARow dtlRow = (OARow)dtlVO.getCurrentRow();
    OARow dtlRow = (OARow)this.findRowByRef(eventRowSourceParam);
  
    String  currency = (String)dtlRow.getAttribute("CurrencyCode");    // NULL POINTER EXCEPTION
  
    if ((currency == null) || ("AED".equals(currency)))
    {
    row.setAttribute("ExchangeRateTypeRender", Boolean.FALSE);
    row.setAttribute("ExchangeRateDateRender", Boolean.FALSE);
    row.setAttribute("ExchangeRateRender", Boolean.FALSE);
    }
    else
    {
    row.setAttribute("ExchangeRateTypeRender", Boolean.TRUE);
    row.setAttribute("ExchangeRateDateRender", Boolean.TRUE);
    row.setAttribute("ExchangeRateRender", Boolean.TRUE);
    }
    }
  

  In the controller:

  if((ADD_ROWS_EVENT.equals(event)) && "AdvTblRN".equals(pageContext.getParameter("source")) )
  {
    am.invokeMethod("createDetailRow",null);
    am.invokeMethod("initPVO");
  } //**End Add Row Button**
  else if ("currCodeChangeEvent".equals(pageContext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
  {
    String eventRowSourceParam = pageContext.getParameter(EVENT_SOURCE_ROW_REFERENCE);
    Serializable[] params = {eventRowSourceParam};
      Class[] paramTypes    = {String.class};
    am.invokeMethod("handleCurrencyChangeEvent",params, paramTypes);
  }
  

  3. Why do you call initPVO when it is clicked on the Add line? Are you calling not just in the PR?

  You could call it once in the PR and let. When you call it PR, you may need to remove the handleCurrencyChangeEvent of this method call.

  See you soon

  AJ

• Using every night and compared to IE where I don't have a problem, there are black lines on all the pages of certain facilities of forum. Have screenshot.

  At first, I was told it was my video driver, but maybe it could be the motherboard. However, IE on the same pages of vBulletin does not horizontal black lines thin and thick, as shown in my screen shopt.

  Try disabling hardware acceleration in Firefox (you will need to close and restart Firefox).

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• My printer has left the copy. It has dark lines across on the page.

  I have a printer/C309 Photosmart Premium Web.  Recently, he stop making copies readable and done the same thing on the scans.  I tried to close all and which did not help.  I can get the printer to print a test page.

  My OS is Windows 7 32 bit.

  Hello mojedo

  Please try the following article. It can help to solve the issue you.

  Streaks or lines in Copies or Scans

• Extra blank line inserted after the page break

  Hello
  
  I currently have problems with alignment using templates in BI Publisher.
  I am trying to create a model that will print on a pre-printed form.
  Each group in the State should be separated by page, so the Group has a <? split-of-page-break:? > before <? end-for-each? >.
  However, when the next page begins, there is a blank line inserted. This messes up the alignment in total.
  
  Code looks like this:
  <? for-each-group: G_Document; / DOCUMENT? > <? sorting: current-group () / DOCUMENT; ' ascending '; data-type = "text"? > <? for - each:current-group()? >
  -INSERT table MODEL HERE-
  <? split-of-page-break:? > <? end-for-each? >
  
  Output is like this:
  
  (Page1) < TABLE MODEL >
  Jump to Page <>
  (Page 2) < new line >
  < TABLE MODEL >
  Jump to Page <>
  (Page 3) < new line >
  < TABLE MODEL >
  Jump to Page <>
  ...
  
  I found this old thread Split-of-Page-Break insert extra line that has exactly the same problem, however, I tried all the proposed solutions, even the last one, and I still have the problem.
  Any help would be greatly appreciated.
  
  Kind regards
  Jovee

  If your issue is resolved can you please close the message and give me a few points.

• Force line break in the page layout

  Hello

  Building a layout, is in any way arround geeting the saying of limitation of current page layout:

  If the layout of your maps leaves gaps in the layout along the edge, the order of the content can vary as pointing the gaps could be filled by smaller maps that are lower in the order

  I need to place some article below banner full width, but if it is enough room for the article that are supposed to be under the banner, they pop up.

  Currently, I have simply create blank dummy article in my collection and put some internal keyword to target them.

  But it is a painful process, as each tim I have add a new article, so I need to remove and to count my fake blank article

  Thanks for sharing best practices.

  Create invisible spacer cards will work, but it adds clutter to the project and needs maintenance. The content map helps with this interview. When "pin" is enabled, the problem should be solved. Until we have the PIN, I afraid using dummy spacer cards is the only workaround for this approach.

• HP C5380 all-in-one printer: a thick black/gray line down the page when scanning.

  1 HP Photosmart C5380 all-in-One Printer

  2. Windows 7 64 bit

  3. no error is, as usual but preview and print with a dark gray line / think through the page.

  4. I got a new monitor.

  How can I fix?  the optical reading area is clean, no dust or dirt present and it just started this without reason. The connections are good, I unplugged and plugged the cables of the computer and the printer and the problem is still there.

  When I scan the document line is present and even when I print the line appears on the printed page is not my screen.

  

  bbjae, it looks like there may be a residual electric charge accumulated in the unit.  When was the last time you did a Hard Reset on this unit?

  Hard Reset:

  * Unplug the unit while the printer is on

  Disconnect the other end of the power cord from the wall jack directly

  * Wait 30 seconds

  * Plug power back in and make sure that the device is running

  So, it is a document with the steps to help fix the vertical lines and scratches in the copies or scans, click on the link below:

  http://support.HP.com/us-en/document/c01887471

• issue with &lt; a href onclick logical to change another div on the page

  I have a div in a < a href delivering a javascript onclick function that makes changes to the other two div on the page.  It follows a "learn more... less... show kind of logic where when the page loads the div called lowerContent appears and the text of div href is show less...»  When they click on this div, a lowerContent div is hiddern and the text of the button is changed to learn more...

  As a newbie to CSS, I have every piece working on his own great works, but when I put all together, it doesn't work.  Loading the page with the lower div displayed and the text to show less...  When you click on one < a href, it works, the lower div is hidden, and the text is changed to learn more...  But, when click on a time (or any number of times) the lower div does not appear (although all other cahnges are working properly.

  I reduced the code for the below which is a minimum and I hope that some experts CSS can help me?

  Thank you very much

  Jay

  <! doctype html >

  < html >

  < head >

  < meta charset = "utf-8" >

  dffsdf < title > Document < /title >

  < style type = "text/css" >

  {#myContent}

  height: 380px;

  Width: 400 PX;

  margin-right: auto;

  left margin: auto;

  border: 2px solid #5F2A2A;

  do-size: 18px;

  }

  {#myButton}

  background-color: red;

  float: right;

  height: 28px;

  Width: 122px;

  right margin: 15px;

  top of the margin: 15px

  left margin: auto;

  border: 0px solid # 38 931;

  }

  : hover {#myButton}

  background-color: gray;

  float: right;

  height: 28px;

  Width: 122px;

  right margin: 15px;

  top of the margin: 15px

  left margin: auto;

  border: 0px solid # 38 931;

  }

  {#lowerContent}

  display: auto;

  height: 100px;

  Width: 300px;

  margin-right: auto;

  top of the margin: auto;

  left margin: auto;

  border: 2px solid # 38 931;

  }

  < / style >

  < script type = "text/javascript" >

  function changeDisplay() {}

  var s = document.getElementById("myButton").innerHTML;

  If (s == "learn more...) ») {}

  document.getElementById("myButton").innerHTML = "Show less..." » ;

  document.getElementById("myContent").style.height = "480px";

  document.getElementById("lowerContent").style.height = "190px;

  document.getElementById("lowerContent").hidden = "true";

  } else {//s will match show less...}

  document.getElementById("myButton").innerHTML = "learn more...". » ;

  document.getElementById("myContent").style.height = '380px ';

  document.getElementById("lowerContent").style.height = '100px ';

  document.getElementById("lowerContent").hidden = "false";

  }

  }

  < /script >

  < / head >

  < body >

  < div id = "myContent" >

  < ul >

  < li > This is line a < /li >

  < li > This is line two < /li >

  < li > it's third line < /li >

  < li > it's four line < an id = "myHref" href = "#" onclick = "changeDisplay (); ">

  < div id = "myButton" > view less... < / div >

  < /a >

  < /li >

  < /ul >

  < div id = "lowerContent" > content line a lower < / div >

  < / div >

  < / body >

  < / html >

  My sample works.  Try to use the code in my JSFiddle example above.

  Nancy O.

• After the relocation, a Virgin window appears in the middle of the page, which has no copy and no way to remove it, but it prevents action on the page.

  I had to restore my hard drive for a date two weeks earlier to eliminate a problem that I had. For some reason, this fuck my Firefox browser. I uninstalled and then reinstalled (several times now). It seems that the resettlement is successful; However, when I open Firefox, a pop-up appears in the center of my home page. He is white, except for a small box that I can check and uncheck the box and a bar gray in the center that does not seem to do much. There is no copy in the pop-up window. It doesn't seem to be any sort of close and it keeps me from taking any other action, including closing the page. No idea what this pop-up and how can I eliminate it? It does not appear with another of my browsers.

  Please try to start firefox in safe mode by pressing the SHIFT key after you double-click on its icon on the desktop and see if you can remove the toolbar aol in there...
  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• leaders do not match the page size

  When I turn on the rules (horizontal and vertical), the scale is incorrect. The horizontal rule indicates that the screen is 11 inches when the page is printed it is actually less than 8 1/2. The vertical ruler shows 12 1/2 when we print it is actually only about 9 1/2 inches. As it is useless carrying information.

  I can't find anywhere to fix this. Preferences are limited to the metric or English system.

  Before answer please to know that is not a rule to the screen. I understand the concept of scalability.  I want just the sovereign to work in number as it does in the pages.  When I format the size of the page, it shows which fits on an 8 1/2 x 11 inch paper.

  Thanks in advance

  EHW

  Hi ehw.

  In edit mode, the leaders will tell you where objects are placed with respect to the upper left corner of a canvas without borders right or bottom. "Pages" do not exist in this mode.

  If your page will be set as a sheet of letter, with margins of one inch, then you area measure nine inches in the long direction and six and a half inches in the sense of available to print short. Pages will break the table such that it is necessary to keep the entire width of the "last" column and the height of the line 'last' on the page.

  On the screen, in edit mode, I put an arrow (in the button menu forms) at 0 and 9 inches on the horizontal ruler, and 0 and 6.5 inches on the vertical ruler, the positions of the edge of the area to print on page 1, when the page is defined:

  

  After you press Command-P, here is what I see for printing:

  

  Send to the printer gives what is indicated above (graphical objects will be printed outside the page margins). The left and right borders of the table are about 1/32 '' too close together; the points of the arrows marking 0 and 6 1/2 "on the vertical ruler is accurate to more closely that I'm able to estimate.

  If you wish to make a request to Apple to change in how leaders work in number, please use the way back - numbers (menu) > provide feedback from numbers - where you can make your needs known to Apple.

  Here, you talk to the users of the product, not to Apple.

  Kind regards

  Barry

• HP 364XL - Photosmart B110 cartridges. Black finger to the bottom of the page. Windows 7 Home Premium

  With the help of genuine cartridges of HP 364XL on my Photosmart B110. Almost everytime I print a document (black) I down a blob of ink and a line to deface the page then just left of Center. Also when you print pictures, I get a blob of black ink on the surface, this can be anywhere on the photo. If I wipe it out on a photo only he quickly leaves a light red looking for smudge.

  I just ordered a complete set of replacement cartridges to see if that helps.

  I tried to clean the cartridges several times without success.

  I'd take a glance at this document , it gives some useful to try troubleshooting steps.

  Let me know how it goes.

• Menu of navigation moves to the bottom of the page when scrolling

  I have built the site and have not really upward ( http://[email protected]) and then I noticed that the main navigation menu moves to the bottom of the page when the page is long enough that it should be the object of a scroll. I thought it was OK, but he will have to stay on top, otherwise it makes a mess with the text on the page. But this does not of course because the navigation menu is in the page master and who will always be on one layer deep.

  So I thought that maybe my choice of set higher than the Panel main page was at fault, so I moved it to slot the name and logo (which is where I have it in the Muse at the moment) but who doesn't either. Still, it moves down with the page and disappears among the pictures and texts. Am I missing a setting somewhere? Or forgotten? I don't find anything useful in the menu "blue arrow" right menu on the master.  ?????

  Thanks in advance.

  I'm bumping this again because I have FINALLY solved the problem - even if it is really a workaround I guess - and it is always possible that someone could use the info. Here's what it looked like before, when I sailed down to the http://www.siegbrunn.de homepage

  

  Main menu - which is under the title of the page & logo and is NOT marked as an element of footer - traveled down with the scroll of the page and produced disorder that you see above. There is no command of scrolling of the menu, he didn't want to stay put.

  Solution:

  I have it grouped with TWO lines of text the Page title that you see (I did previously with ONE, and it did not work). It works now (at least in Chrome) and I'm relieved.

• How to not show the pages in the Site map

  This is probably the simplest question of them all... but...

  How do you not show pages in the sitemap?

  It seems that by default, all pages are added to the sitemap.

  Is this a case of unchecking 'enabled' and 'exclude search results' under 'Other Options' control on the page itself?

  Or another way?

  Hi David,

  The "exclude from the search results ' will remove the 'yoursite.com/sitemap.xml' sitemap.xml and major to be picked up search engines.  If you check this option, please allow a few hours to have the xml code to reflect the changes.

  ""If you select this option, then this web page will be excluded from search site integrated to this system, as well as the sitemap.xml file submitted to the major search engines such as Google, Yahoo and Live.".

  Sitemap under site settings module is not related to the xml file, so you will need to manually remove and insert on your page if you use this function.

  - http://kb.worldsecuresystems.com/kb/add-sitemap.html

  Hope that clarifies.

  -Sidney