Other than the use of Messenger, how do I send messages to WIN7 for XP on network domestic?

Similar Questions

• Any approach other than the use of a function

  Hello
  
  I use Oracle 10.2.0.4.0 version
  
  Create tabel
  

  CREATE TABLE TEST
  (  GROUP_NUM        CHAR(8 BYTE),
     DIVISION_NUM     CHAR(5 BYTE),
     DIVNAME          CHAR(40 BYTE));

  Insert a table
  

    insert into test (GROUP_NUM,DIVISION_NUM,DIVNAME) values ('123','0001','deltatrans');
    insert into test  (GROUP_NUM,DIVISION_NUM,DIVNAME) values ('123','0002','deltatrans1');
    insert into test  (GROUP_NUM,DIVISION_NUM,DIVNAME) values ('123','0003','deltatrans3');
    insert into test  (GROUP_NUM,DIVISION_NUM,DIVNAME) values ('456','0001','transatlan');
    insert into test  (GROUP_NUM,DIVISION_NUM,DIVNAME) values ('456','0002','transatlan1');
    insert into test  (GROUP_NUM,DIVISION_NUM,DIVNAME) values ('456','0003','transatlan2');

  Select * from test

  group_num division_num  divname
  123          0001      deltatrans                              
  123          0002      deltatrans1                             
  123          0003      deltatrans3                             
  456          0001      transatlan                              
  456          0002      transatlan1                             
  456          0003      transatlan2                             

  I need the output voltage

  group_num  division_num   divname                                       grpname
  123          0001      deltatrans                                   deltatrans                              
  123          0002      deltatrans1                                  deltatrans                              
  123          0003      deltatrans3                                  deltatrans                              
  456          0001      transatlan                                   transatlan                              
  456          0002      transatlan1                                  transatlan                              
  456          0003      transatlan2                                  transatlan              

  The grpname column should display the value in the divname column where the divison_num is the minimum for this group.
  
  Currently I use a function to do
  
  Function:
  

  CREATE OR REPLACE FUNCTION
                                  fn_testgpname (
                         GPNO IN VARCHAR2  )
      RETURN  varchar2
      AS
  RESULT varchar2(40);
  BEGIN
  select divname into result  from test
  where group_num = gpno
  and division_num = (select min(division_num) from test where group_num = gpno);
  RETURN RESULT;
  EXCEPTION WHEN NO_DATA_FOUND THEN
          DBMS_OUTPUT.PUT_LINE (SQLERRM);
            DBMS_OUTPUT.PUT_LINE (RESULT);
            RETURN NULL;
            WHEN OTHERS THEN
            DBMS_OUTPUT.PUT_LINE (SQLERRM);
            DBMS_OUTPUT.PUT_LINE (RESULT);
            RETURN NULL;
  END;
  /

  I'm going to call the function in the qry as
  

  SELECT GROUP_NUM,DIVISION_NUM,DIVNAME,fn_testgpname(group_num) grpname FROM TEST

  Also, I noticed when I create a table with the above statement as

  create table testing as SELECT GROUP_NUM,DIVISION_NUM,DIVNAME,fn_testgpname(group_num)grpname FROM TEST

  the structure of the table is like this

  CREATE TABLE TESTING
  (
    GROUP_NUM     CHAR(8 BYTE),
    DIVISION_NUM  CHAR(5 BYTE),
    DIVNAME       CHAR(40 BYTE),
    GRPNAME       VARCHAR2(4000 BYTE)
  )

  Why did the grpname returned as varchar2 (4000 byte)?
  
  
  Thanks in advance.

  My response above.

  >
  The reason why your table is created with varchar2 (4000), it's that your function returns a varchar2. If oracle picksup default maximum limits for varchar2 and creates the column.

  Limit Max for varchar2 is 4000.

  >

  The reason why he picks up the maximum limit is that... Your function can return a string up to 4000 bytes. Thus, it creates the column with 4000.

  If you want with 40 even you can convert,

  CREATE TABLE test1 AS
  SELECT group_num,
         division_num,
         divname,
         CAST(first_value (divname) OVER (PARTITION BY group_num ORDER BY division_num) AS char(40)) AS grpname
    FROM TEST;
  

  G.

• What are some editing apps good free photo for Mac, other than the Photos of Apple?

  Hi everyone, I'm looking to see what free apps, you guys use for editing photos?  I have a photography class to come and play with options other than the use of pictures of the Apple app.  Nothing against the app, I just learn more.  Thank you.

  Strange question to the users of the forum pictures - of course, the answer is Photos for Mac

  Photos is optional and if you don't like it, then, Google is your friend

  LN

• How can I farm Metro application other than by using the Task Manager?

  How can I farm Metro application other than by using the Task Manager? If there is no way, please add a close button, Microsoft.

  Hello

  ·          What version of the operating system is running on your computer?

  Alternatively, press ALT + F4 to close the application.

• How can I set the format of Windows Media Center at 16:10 in other than the full screen?

  How can I set the format of Windows Media Center in Vista at 16:10 in other than the full screen? I use a screen as secondary display 1680x1050px.

  Hello, YPOC

  It is not possible to change the proportions for Media Center in windowed mode.

  The aspect ratio has been changed in Windows 7 and uses a format screen mode to windowed.

• I just bought a 6 d. is it possible to use the grid in other than the auto mode?

  I just buy a 6 d.  Is it possible to use the grid in other than the auto mode?  Also, is there a way to use the self-timer in other than the auto mode?

  Thank you very much. I look forward to your comments.

  I have to assume that your camera came with a manual you need to rely on. In my manual for my 7 d Mark 2 the index near the end of the manual lists the applicapable pages for whatever this is relating to the use or other people. Grid is under G, Self Timer is under S and called "self-timer."

  If you use a computer based pdf to see the info it will probably be several pages listed, but you can click on a page number to get to it rather than scroll to it.

• How to create a window with its own window border other than the local system window border?

  How to create a window with its own window border other than the local system window border?

  For example, a border: a black line with a width of 1, then a transparent line with a width of 5. Inside, it's the content pane.

  In JavaSE, there seems to be for the JFrame paintComponent() method to realize the effect.

  I can't see what you're trying to do now: it's a little trickier. You need stage.initStyle (StageStyle.TRANSPARENT), and I think you have to imitate the transparent part of the border by the presence of a second vessel inside the root container, properly positioned.

  Something like:

  
  import javafx.application.Application;
  import javafx.application.Platform;
  import javafx.event.ActionEvent;
  import javafx.event.EventHandler;
  import javafx.scene.Scene;
  import javafx.scene.control.Button;
  import javafx.scene.layout.AnchorPane;
  import javafx.scene.layout.StackPane;
  import javafx.scene.paint.Color;
  import javafx.stage.Stage;
  import javafx.stage.StageStyle;
  
  public class CustomBorderExample extends Application {
  
    @Override
    public void start(Stage primaryStage) {
    AnchorPane root = new AnchorPane();
    root.setStyle("-fx-border-color: black; -fx-border-width: 1px; ");
  
    StackPane mainContainer = new StackPane();
      AnchorPane.setTopAnchor(mainContainer, 5.0);
      AnchorPane.setLeftAnchor(mainContainer, 5.0);
      AnchorPane.setRightAnchor(mainContainer, 5.0);
      AnchorPane.setBottomAnchor(mainContainer, 5.0);
    mainContainer.setStyle("-fx-background-color: aliceblue;");
    root.getChildren().add(mainContainer);
  
    primaryStage.initStyle(StageStyle.TRANSPARENT);
    final Button closeButton = new Button("Close");
      mainContainer.getChildren().add(closeButton);
      closeButton.setOnAction(new EventHandler() {
        @Override
        public void handle(ActionEvent event) {
          Platform.exit();
        }
      });
    primaryStage.setScene(new Scene(root,  300, 200, Color.TRANSPARENT));
    primaryStage.show();
    }
  
    public static void main(String[] args) {
    launch(args);
    }
  }
  

• How to better convert 01:56 and not lose quality other than the 4 K to 2 k

  If I take a 4 K produce and convert/low res to 2 k by 2 k, importing in a time line am I lose quality other than the 2 k low res? Is it bad for the film? Does make a difference if the position would give me a 2 k vs file to me? It's a feature and I need lower res that it creates a DCP. so I'm concerned about quality. And is it all still do not lose quality on import and export. It seems that I lose 15GB.

  YYou are reducing the resolution, but you're not really lower the quality. There should be no difference between you do it or someone else do it. The file will be much lower in 2K 4 K. It is to be expected.

• I can't get my computer in safe mode. The custom of menu f8 "Let me pick something other than the normal mode. My keyboard works perfectly fine (obviously since I could press f8), but it won't let me choose Safe mode.

  I can't get my computer in safe mode.  The custom of menu f8 "Let me pick something other than the normal mode.  My keyboard works perfectly fine (obviously since I could press f8), but it won't let me choose Safe mode.  I have a Trojan horse on my computer so I'll try to get it in safe mode.

  Hello

  Start - type in the search-> MSCONFIG box find top - make a right click on - RUN AS ADMIN

  Control - Section Boot - Safe Boot Startup tab and check the boxes below if necessary - APPLY / OK - REBOOT.

  ===========================================================

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Keep other than the folder RES - OBIEE 11 g jpeg files

  Hi all

  I'm trying to keep jpeg files in one path other than the default, because we have millions of files to keep. I found a few forums explaining how to proceed. It is said to change the weblogic.xml file that is available in the

  Step 1:   Navigate to the path of C:\OBIEE11G\Oracle_BI1\bifoundation\jee and analytics.ear open.

  Stpe2:  By opening the ear file, we can see the analytics.war file, open the war file.

  Step 3: now click on the WEB - INF folder and open weblogic.xml file.

  But I couldn't find the weblogic.xml in the path below. I opened analytics.ear and analytics.war using winzip. Can someone help me to satisfy this requirement. Thanking in advance, you and any help will be appreciated.

  This is something that is available on the Web site. I was in need to find the forgotten in the drive weblogic.xml file. In any case, I managed to create a new file weblogic.xml and solve this problem. But my current problem is now I am able to access the files on the way. But I'm unable to access the files from the Folder (Default) RES

• The pencil of Apple requires a port light to recharge.  Does anyone know a USB male to female adapter port lighteners that would load the pencil on one device other than the iPad?

  The pencil of Apple requires a port light to recharge.  Does anyone know a USB male to female adapter port lighteners that would load the pencil on one device other than the iPad?

  Apple pencil comes with its own map of woman to woman, so you can use a standard lightning cable USb and charger to charge

  Not sure there is no 3rd party yet.

• Firefox is redirect to sites other than the one clicked on.

  When you click on search sites by using the bar (address bar not) search, you are redirected to one site other than the one you clicked on. It happens not on all sites found, but on a large number of them. However, in all cases where sometimes the site redirected to is [adlinksearch.com]. I use PC Tools Spyware Doctor and it has found no problems with Malware. I can go on the site if I put the address in the address bar. I use igoogle search bar. Please help with this issue, because it is very annoying.

  This has happened

  Each time Firefox opened

  == Unknown as to exactly when he started

  Firefox closes alltogether when you go to youtube videos, not youtube itself. Redirects to other sites. ran malaware and spybot. Any suggestions?

• PXI-8250 in one frame other than the 1042/1045 or PXI-1044?

  The PXI-8250 will work at any level in one frame other than the 1042/1045 or PXI-1044?

  Hi djfrye.

  The PXI-8250 can only be used in the 1042 / q 1042/1045.  It will not work in the PXI-1044.

  Good luck with your application!

• can I install programs on one physical drive other than the drive that contains the operating system Vista

  My hard drive crashed and I didn't do a reinstall full Vista no problem here other than do not pay attention, I installed the operating system on one 80 GB disk other than the new 320 gig which was. After the new facility and all new updates, I have 25 GB of free space. I would like to know if I can install new programs on my drive d: and no filling of drive c: for the ability

  Hello

  Thanks for posting this question in the Microsoft Community Forums.

  I see you want to know if you can install programs on a drive with no operating system.

  I wish to inform you that this is possible with only specific programs, which give the user an option to choose where the program is installed.

  When a program is installed, it runs in program files, which lies in the operating system drive and can not be moved elsewhere.

  Another reference:

  Microsoft does not support changing the location of the program files

  http://support.Microsoft.com/kb/933700

  I hope that you found this information useful.

  Please get back to us if you have any other questions about windows.

• When I right click Start button select Explorer, I can decide what folder is open other than the start menu?

  When I right click Start button select Explorer, I can decide what folder is open other than the start menu and dozens of file extensions?

  Can we just my computer with the list of drives?

  thanx

  Hello

  I suggest you to follow these steps and check if that helps:

  a. right click on the Windows Explorer icon

  b. in the menu that appears, click Properties.

  c. in the target box, add the command line switch ' / root ' to the "% SystemRoot%\Explorer.exe" command, using the startup location that you want.

  d. for example, if you want Explorer of Windows to start at the root of drive C, edit the command as follows:
  % SystemRoot%\explorer.exe/root, C:\

  It will be useful.