Noise levels dropped and I lost clarity after updates installed recently

Similar Questions

• There were add - it and I lost it after the update and I don't remember his name

  There were add - it and I lost it after the update and I don't remember his name
  This is the module to show me the source of any content capable of click
  like the pictures on twitter or Facebook
  also videos on youtube
  and he showed a small icons with form of small pic on it with different colors
  and also sometimes in the form of small lock on it

  now I need to know what this add - on the name or how to get it back

  It seems that this extension:

  • https://addons.Mozilla.org/en-us/Firefox/addon/redirectbypasser/

  

• IPad 2 Air battery drained and does not load after update 9.3

  Air iPad 2 (Wifi + cell) battery has completely evacuated and no charge since after update 9.3. Update my device was 100% of the fees. Subsequently, when the update was finished, the Unit continued to lose the load during use (I got the full enjoyment on the charge) and does not charge even on not trying to load intermittently and for long periods. Once the load is complete evacuated after considerable use, I was unable to see the unit after 2-3% fees.

  I have restored and updated the device via iTunes, but the problem persists, and I see a battery on the scree with 3 red lines. When I take off the charge cable, I get a black screen with battery 3 red lines and a chart of the charging cable.

  I had once the apple logo and the ipad started and I had the interface momentarily, but he lost.

  I have been struggling with this for the last 4 days and have tried almost every single suggestion there. Connection to the support of people was not possible on the web. And I am currently in another country where he sold the IPad to be able to switch the device back to the Apple Store to have checked out it during the warranty.

  Any suggestions are welcome. TIA.

  Well, I had the camera to load up to 61% where it is blocked again.

  Here's what I did that I had not done earlier out of the many resolutions that I tried from that provided in the forums and on the internet-

  I put the IPad for a couple of hours in his keyboard case and then all located in a thin cloth and put it on charge, ostensibly to warm a little battery. The warm-up was suggested in another thread, where a person even went to the extreme of using a fan hair dryer to warm the device. After a few hours, he did to load up to 60%, I got it out to check if it worked.

  Maybe I shouldn't have checked and waited a little longer, because the IPad is now stuck at 59 to 61% for the last 14 hours for free. I still struggle to go beyond this percentage, but at least I can use the device. Is there something I can do now to improve the percentage of charge? I tried the resets and even restored and updated the iOS through iTunes.

  Hope the above helps someone.

• I have Adobe Acrobat 9 Standard on both of my computers.  Some time previously, one crashed my computer and I had to reinstall the operating system and all applications.  After you install Acrobat 9 special and differential treatment in the computer once,

  I have Adobe Acrobat 9 Standard on both of my computers.

  Some time previously, one crashed my computer and I had to reinstall the operating system and all applications.

  After you install Acrobat 9 special and differential treatment in the computer once, I wanted to update the update of the version 9.0.0 software to the same level as it was before the crash and that the other computer has version named 9.5.5.

  The update to version 9.0.0 system does not at all. 'There is no update' listed in the dialog box.

  Can you advise how to get my Adobo Acrobat 9 Standard (Version 9.0.0) could be updated to the same level it had before the accident.

  FTP://FTP.Adobe.com/pub/Adobe/Acrobat/Win/9.x/

• The crashing apps and battery drains quickly after updating iOS 9.2

  Well, that's what's happening: before upgrading to iOS 9.2, no app crashed, my battery lasted all day and everything was fine, but after update, applications such as Facebook, YouTube, Maps, even (Yes, stock cards, no Google or whatever it is) kept crashing and now I have to charge it twice a day to operate. Also, I noticed it worked a bit hot too, don't know if that is related to the battery issue, but he started to be going after the update, before, he had run cool, so I don't think is a hardware problem. If there is a solution, please let me know, because it's pretty boring, gtting thanks in advance.

  You must close information apps, iOS 9.2 takes about 5 GB of storage, so I think that you have a 8 GB model

• Windows 7 does not load and cannot be retrieved after update.

  It occurs first, about 2-3 months ago. Update my Windows 7, he said: "Step 5 of 5", then reloaded, and... I saw a BIOS screen, when I chose Windows startup, he tries just to start and return to the BIOS screen as there is not any OS.

  So, then I guess not that the problem lies in the update; I tried to recover Windows from my drive, but he says that the windows are different to my computer and my drive. So, reinstall Windows, the disk and after a few updates (I think that when it came to the last of them) all repeated. So I just reinstall Windows again and turn off the auto updates, since I don't have the time to fix the problem.

  Everything works fine, until a few days ago I turn on automatic updates for it, and now I had the same problem. Fortunately, I have installed Linux on another hard drive, so I am currently using.

  What technical information I give to get any help? It's a pretty annoing because the computer is less than 3 years.

  Do not use Windows Update before installing the latest version of the Windows Update Client, KB3161647.

  https://support.Microsoft.com/en-us/KB/3161647

  Best regards, VZ

• InDesign is no longer we'll me colorize black in grayscale or black and white images related after update.

  I first noticed this problem when I open an old file that I knew that I had previously color and black and white logo with a shade. When I open the file after update, the logo positioned (this is a tiff file, the color space is black and white) was black instead of orange. I know I used to be able to place an image in black and white, double click it and change the shade black to a color, but now after update I can't do. I tried to uninstall and reinstall the program, but I had no chance. Any ideas?

  Known issue. Use overprint preview to see the appropriate color.

• NAV to and links page broken after update of the content viewer!

  I just put a message from my client asking why all the Nav and page links to the links do not work? She has just updated the Viewer on his ipad.

  After updating the content on my Ipad Viewer the same thing happened.  I now have to download each article again to see if this corrects the folio.

  I've updated the 1 article and this seems to have fixed the entire folio links. Signature and content viewer seems however to stop the links once again. At the moment I have everything works again. Is this a bug?

  The fix is now in place. Download the new version of DPS App Builder and edit or rebuild your single-folio application. The links on the page should function properly.

• iMac hangs after update of recent software - "an element of the liberated area has been modified in the area of pipe.

  I have an iMac 21.5 "2009 end which I never had no problem with. It is Yosemite 10.10.5 running and after a recent software update has become very unstable. After I restarted recently he crashed 5 times a day. It seems to be the internet causing the problem (I use Google and Safari and had adbloc on Google).

  This is a copy of the last problem report. Any help would be appreciated.

  Anonymous UUID: 7DBCDA8C-8FD9-63FE-7843-971A36805010

  Mar 22 19:13:35 dec 2015

  Panic report *.

  panic (cpu 0 0xffffff800c76bf7d appellant): "an element of the liberated area has changed in the area of pipe: expected 0xc0ffeeb11389b206 but found 0xc0ffeef11389b206, wicks 0 4000000000 changed x, offset 168 of 176 in the element 0xffffff801a243a70, cookies 0x3f00113109ad8bc6 0x53521947e0c1049"@/SourceCache/xnu/xnu-2782.50.1/osfmk/kern/zalloc.c:496.

  Backtrace (CPU 0), frame: return address

  0xffffff809f79bc70: 0xffffff800c72ad21

  0xffffff809f79bcf0: 0xffffff800c76bf7d

  0xffffff809f79bd60: 0xffffff800c76b9f1

  0xffffff809f79bda0: 0xffffff800c76a837

  0xffffff809f79bed0: 0xffffff800cbefd61

  0xffffff809f79bf50: 0xffffff800cc4b376

  0xffffff809f79bfb0: 0xffffff800c8344a6

  The process corresponding to the current thread BSD name: firmwaresyncd

  Mac OS version:

  14F1509

  Kernel version:

  14.5.0 Darwin kernel version: kills Sep 1 21:23:09 PDT 2015; root:XNU-2782.50.1~1/RELEASE_X86_64

  Kernel UUID: 06D286E3-A8A1-3BE7-A7EB-EAC6E0C69758

  Slide kernel: 0x000000000c400000

  Text of core base: 0xffffff800c600000

  Text __HIB base: 0xffffff800c500000

  Name of system model: iMac10, 1 (Mac-F2268CC8)

  Availability of the system in nanoseconds: 350747261770

  last load kext to 295918008027: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7f8ef37000 size 69632)

  Finally unloaded kext to 148510260291: com.apple.iokit.IOAHCIPassThrough 1.0.3 (addr 0xffffff7f8e061000 size 36864)

  kexts responsible:

  com.rim.driver.BlackBerryUSBDriverInt 0.0.68

  com Apple.filesystems.msdosfs 1.10

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AGPM 110.19.6

  com Apple.filesystems.autofs 3.0

  com.apple.iokit.IOBluetoothSerialManager 4.3.6f3

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleHDA 272.18.3

  com.apple.driver.AppleMikeyDriver 272.18.3

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleLPC 1.7.3

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHWAccess 1

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleBacklight 170.7.4

  com.apple.GeForceTesla 10.0.0

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleMCCSControl 1.2.12

  com.apple.driver.AppleIRController 327,5

  com.apple.driver.AppleUSBCardReader 3.5.5

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 36

  com.apple.iokit.SCSITaskUserClient 3.7.5

  com.apple.driver.XsanFilter 404

  com.apple.iokit.IOAHCIBlockStorage 2.7.1

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.driver.AirPort.Atheros40 700.74.5

  com.apple.driver.AppleUSBHub 705.4.2

  com.apple.driver.AppleHPET 1.8

  com Apple.nvenet 2.0.22

  com.apple.driver.AppleAHCIPort 3.1.2

  com.apple.driver.AppleUSBOHCI 656.4.1

  com.apple.driver.AppleUSBEHCI 705.4.14

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleACPIButtons 3.1

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 3.1

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 161

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  3.10.25 com.apple.AppleGraphicsDeviceControl

  com Apple.kext.Triggers 1.0

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.DspFuncLib 272.18.3

  com.apple.kext.OSvKernDSPLib 1.15

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.AppleSMBusPCI 1.0.12d1

  com.apple.driver.IOPlatformPluginFamily 5.9.1d7

  com.apple.iokit.IOUSBUserClient 705.4.0

  com.apple.driver.AppleHDAController 272.18.3

  com.apple.iokit.IOHDAFamily 272.18.3

  com.apple.iokit.IOAudioFamily 203.3

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOSurface 97.4

  com.apple.iokit.IOBluetoothFamily 4.3.6f3

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0

  com.apple.driver.AppleSMBusController 1.0.13d1

  com.apple.nvidia.classic.NVDAResmanTesla 10.0.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.AppleUSBHIDKeyboard 176,2

  com.apple.driver.AppleHIDKeyboard 176,2

  com.apple.iokit.IOUSBHIDDriver 705.4.0

  com.apple.driver.AppleUSBMergeNub 705.4.0

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.5

  com.apple.iokit.IOBDStorageFamily 1.7

  com.apple.iokit.IODVDStorageFamily 1.7.1

  com.apple.iokit.IOCDStorageFamily 1.7.1

  com.apple.iokit.IOAHCISerialATAPI 2.6.1

  4.5.8 com.apple.iokit.IOFireWireFamily

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.iokit.IO80211Family 730.60

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IONetworkingFamily 3.2

  com.apple.iokit.IOAHCIFamily 2.7.5

  2.2.9 com.apple.driver.NVSMU

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 398

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.iokit.IOUSBMassStorageClass 3.7.2

  com.apple.driver.AppleUSBComposite 705.4.9

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.5

  com.apple.iokit.IOStorageFamily 2.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5

  com.apple.iokit.IOUSBFamily 720.4.4

  com.apple.driver.AppleACPIPlatform 3.1

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  System profile:

  Airport: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0 - P2P

  Bluetooth: Version 4.3.6f3 16238, 3 services, 27 aircraft, 1 incoming serial ports

  Crush Bus:

  Memory module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020

  Memory module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020

  USB device: Keyboard Hub

  USB Device: Apple keyboard

  USB device: ISight built-in

  USB device: Memory card reader internal

  USB Device: IR receiver

  USB device: USB optical mouse

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  Serial ATA Device: WDC WD5000AAKS-40V2B0, 500,11 GB

  Serial ATA Device: OPTIARC DVD RW AD - 5680H

  Model: iMac10, 1, IM101.00CC.B00 of BootROM, 2 processors, Intel Core 2 Duo 3.06 GHz, 4 GB, MSC 1.52f9

  Network service: Airport, AirPort, en1

  Graphics card: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB

  Model: iMac10, 1, IM101.00CC.B00 of BootROM, 2 processors, Intel Core 2 Duo 3.06 GHz, 4 GB, MSC 1.52f9

  Graphics card: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB

  Memory module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020

  Memory module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020

  Airport: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0 - P2P

  Bluetooth: Version 4.3.6f3 16238, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Airport, AirPort, en1

  Serial ATA Device: WDC WD5000AAKS-40V2B0, 500,11 GB

  Serial ATA Device: OPTIARC DVD RW AD - 5680H

  USB device: Keyboard Hub

  USB Device: Apple keyboard

  USB device: ISight built-in

  USB device: Memory card reader internal

  USB Device: IR receiver

  USB device: USB optical mouse

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  Crush Bus:

  com.rim.driver.BlackBerryUSBDriverInt 0.0.68

  Try to uninstall RIM.

  Uninstallation of RIM

• T440s lost Bluetooth after having installed the latest updated via the Lenovo system update

  Hi everyone, my setup - Windows 8.1, Intel Dual Band Wireless AC 7260 with Bluetooth built-in.

  After the installation of the last packet of Intel's Bluetooth (via the Lenovo system update), I lost Bluetooth constantly.

  -J' I tried to uninstall the update of the driver, nothing has changed.

  -J' tried to restore through Windows Restore Point (I did a fresh restore point before you install these updates,) without success...

  I noticed that:

  -When this happened, the fingerprint reader to are featured strange - there is no if light (with green light) initially, Windows, and Windows was asking me a password instead of the fingerprint.

  -In the Device Manager. Bluetooth category disappeared (I was there before the upgrade - for sure.). but I saw a new unrecognized device whose name ends with something like "(de l'énumération n'a pas pu) '-this could probably be the Bluetooth card."

  -L' tray for Bluetooth icon disappeared.

  -The Bluetooth system option submenu and its devices in the Windows settings disappeared (and it was here before).

  -Looking for Bluetooth in Windows 8.1 returned property (with Win + W hotkey) framework "set up Bluetooth devices" or similar, but when I clicked it, it couldn't access this option - just took me to the main configuration screen.

  I had to do a restore of the system using Linux (thankfully made a full HD image backup of the HDD and SSD using Clonezilla readers - that was the only way to fix this-instead of complete reinstallation of Windows).

  The only driver that works for me is the Intel version 3.1.1307.364 issued on August 1, 2013.

  -Anyone else had similar problems?

  Apart from this, the Bluetooth disconnects always happen: see http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T440s-major-WiFi-and-Bluetooth-instability/...

  Can someone give me some advice please?

  I need help with this.

  I found a solution to this problem.

  Apparently, installing bluetooth driver through update system does not install it properly.

  So I downloaded the latest driver of Lenovo driver download page, and instead run autorun.exe, I sailed to 64-bit dir and then run the installation program.

  Everything works fine now.

• Start-up and white screen issue after updating to v10.11.5?

  I can't say 100% that my problems are related to the last update, but I thought I'd ask.

  I've updated about 4 or 5 days ago, and although the questions did not begin immediately, they start after the update. It should be noted that I have never had issues like this before.

  Here are some of my questions on my MacBook Pro (17 inch, early 2011), 2.2 GHz Intel Core i7, 8 GB at 1333 MHz DDR3, Intel HD 3000 512 MB graphics card

  1. the monitor will sometimes go haywire and a strange split, screen where the mouse can go to the left side of the screen and reappear on the right side of the screen, because the office is now split into two

  2. computer crashes and the monitor starts flashing to show a blue zigzag striped background

  3 freeze during startup and never restart computer. Occasionally, it will start very well, but the computer locks upwards at some point while using

  4 computer at boot flashing out to a white screen then restart never

  Thanks for any help.

  Now I'm starting to think my problems are related to a single user, sign in. Only 2 people use the computer and my connection seems to be fine. No crashes or anything like that.

  The problems start when my wife logs in to his user account.

  Thought I would mention it.

  Any help/response would be appreciated.

• EliteOne 800: HP_RECOVERY and HP_TOOLS missing partition after re-install-why only on one system?

  Short:

  After you have reinstalled Windows Pro 8.1 with the original OS from HP on two EliteOne 800 DVD, I got scores HP_RECOVERY and HP_TOOLS on a PC, but not on the second.

  Long:

  So I got two new 800 EliteOne out of the box, as well with blue screen (iastorA.sys). Sad quality question, but nevertheless, I got the 8.1 original DVD Pro with systems. So I reinstalled completely the two systems. Two BIOSES have the same exact parameters, the two systems are actually identical.

  First installed very well system. The DVD of 8.1 drivers to install all the drivers, including Intel RST and SSD caching.

  I see drive d (HP_RECOVERY) and drive E: (HP_TOOLS). At the time of startup, F11 works. In Windows, diskmanager shows all partitions.

  Now to the second system. Installation went smoothly as well, BUT... I don't see the additional partitions. So F11 will obviously not work.

  What happens here?

  I also recognized that on the second system, the drivers are not installed properly. Installing the software on the drivers disk HP tells me that everything is installed and I need to reboot, but no. On the next check, drivers were not installed.

  What else can I check?

  DH

  After that I got a 3rd system with exactly the same issues, I believe that this is a generic problem with this type of system.

  I formatted all drives outside the system. I used the Bootcd (i.e. UBCD) to do the same while the disc was still in the system.  Finally, I was able to successfully install the 3rd system. But I have in vain on the 2nd.

  In any case, I put this in the list of the mysteries. I haven't the time more to study.

  Overall, I am deeply disappointed with these HP systems.

  Dan

• HP envy 15 t-j100: screen went white and caps lock flashing after update bios!

  Update my bios to the latest version via app HP support and after it restarted the screen are empty and the caps lock flashing! What can I do about it?

  Thank you for visiting @omidmiri.

  Here on the Forums of HP's Support, you have access to many members of the community with solutions and suggestions to help. I understand that you have a problem with a black screen and the Caps Lock LED flashes after a BIOS update.

  The led near the caps lock shift keys and numlock blinks if a fault is detected during the boot process. The LEDs flash multiple times in a sequence and then stops.

  Please try to manually perform a BIOS recovery, as follows:

  1. Turn off the computer.

  2. Plug the laptop using the power adapter.

  3. When the computer is always off:

     1. Press on and hold the Windows key and the B key at the same time and then press in and hold the power button on the laptop for a second.

     2. Release the power button and the keys.

  By following these steps, the BIOS will reach the EFI partition in order to recover the BIOS to the latest known version of the BIOS from the hard drive.

  Source: Documentation computer won't start not and Emits a LED or beep Code .

  If this does not work, please use the above original document to calculate the number of flashes and troubleshoot accordingly.

  If you think this post has helped you, would help others joining and looking for a solution or you just want to say well done, please click the button accept as Solution or Thumbs Up.

  I would like to know how this happens. If you need assistance, I would be more than happy to continue to help!

  Have a great day!

• Mouse, fingerprint and photo scanner fail after updating to the latest version of Windows 7

  Since the last update of Windows 7, my wireless mouse, fingerprint reader and webcam all failed to exploit.  Please advise?

  Hi Divya R,.

  Thank you for taking the time to answer.  In Device Manager, there's 3 USB without name of devices that contained errors.  Even uninstall and restart did not resolve errors.  As the fingerprint reader and camera are built into the laptop, there is no option "Reinstall" and Sony eSupport was just shocking!

  So after some reading on various forums where a lot of people report the same problems with Windows 7 auto was last updated, I stumbled upon a solution:

  SOLUTION:

  1 uninstall USB devices without a name with errors.

  2. shut down Windows.

  3 unplug the laptop and remove the battery of the laptop for a few minutes

  4. replace the battery and restart Windows

  5 USB devices reinstall themselves and fix of a problem!

  Can someone at Microsoft tell me why it works?

  Other than this little glitch, I'm very happy with Windows 7.  Thank you very much!

• My phone is lock and does not start after you install an update to Windows.

  After you have installed the Windows Vista Home Premium on my laptop, I am unable to start my laptop properly.

  Boots systems and load normally until the display of connection where instead of the login screen, I show the screen updated frozen on "Installing part 3/3 (0%) update." The laptop stays on this screen, with the cursor froze with a loading icon, for about half a minute until the screen shuts off and reboots the system, put the system in a loop, I can't on.

  I tried: turning off on and powered. using advanced boot options to open the system to all types of 'Safe Mode' and leaving the laptop for some time before trying to turn on the system again. All these things have not worked and the system remains in the lock down.

  I wonder if it is a common problem after the latest Vista updates or if it is more specific to my laptop. Whatever it is, any kind of feedback and advice would be most appreciated.

  Thank you.

  After you have installed the Windows Vista Home Premium on my laptop, I am unable to start my laptop properly.

  "part 3/3 (0%) update installation." ... and restart the system.

  See if this sugesstion can help you:- http://support.Microsoft.com/kb/949358 >