Out intention widget popup problem

Similar Questions

• Well, after spending several hours of research and not coming up with solutions, I'm finally back to get "out there". My problems with iMovie 09-1 - import a picture in iPhoto 9.6.1 in an existing project in very small. All the appe

  Well, after spending several hours of research and not coming up with solutions, I'm finally back to get "out there". My problems with iMovie 09-

  1. import a picture in iPhoto 9.6.1 in an existing project in very small. Everything seems OK, picture looks that it imported, 4S etc but in fact there nothing there except a black screen, long 4 seconds. I tried all the suggestions in a dozen of discussions but nothing works.

  2 - by sliding the cursor (pointer) on clips in the project or the event of the flip backwards and return to normal once the cursor is removed. Clips of transfer of events to the project smoothly and are right side up.

  What can be done on the transfer of photos and clips reversal?

  Are you running at El Capitan?   He does not play well with versions of iMovie earlier than version 10.

  (Even in 10.1 some pictures with some computers may show a black in the viewer screen, although in this case there are solutions.)

  Geoff.

• Widget slideshow and Composition Widget synchronization problem

  I have a slide show with pictures and the widget of the composition of the text that corresponds to each slide. The parameters are the same for both, works very well on desktop even on versions of the Tablet and iphone, they are messy.

  Here is the site of BC: dezinegirl

  I've been waiting for the customer via Chat to figure it out by looking at my files, but it has been an hour and I don't think he knows.

  Does anyone else have this problem?

  BTW: I work with a model purchased.

  Thank you!

  Hi Pam,.

  Instead of using the widget slideshow in synchronization with the widget of the composition, I will propose that you pass to the use of a widget of composition. Slideshow widgets does not block of text but widgets of composition allows to images as well as text blocks. So you can allocate individual blocks of text for each target and that should give you the effect you're looking for without any problems of synchronization.

  Let me know if you need more information on this.

  - Abhishek Maurya

• uiShell in popup problem

  Hello
  I'm working on uishell and I encouting a problem that needs your help!
  
  Scenario:
  I have create a JSF page named "main.jspx" using Oracle Dynamic tabs Shell, a workflow ADF named 'first.xml' and a jsf page fragment called 'first.jsff '.
  On the 'first.jsff', I create a popup 'p1' and use 'AdfPage.PAGE.findComponent ('p1')' to call 'p1 '. It does not work. I searched articles on this subject, and I know I should be written as ' AdfPage.PAGE.findComponent (' xxxx: xxx: p1'). XXX State absoluteId. How can I write the absoluteId beacause "first.jsff" is not an id in "main.jspx". Can someone give me some advice? Thank you!!
  
  
  additional:
  
  If the popup "p1" is created
  on main.jspx, it works. But this isn't what I want.

  Hello

  You can try to identify your component customer id by viewing the source code of your page is displayed in the browser when running.
  You can also check out this blog for a lot of control: [http://soadev.blogspot.com/2010/02/adf-faces-rc-simple-but-robust.html]

  Kind regards

  Pino

• Screen Popup problem

  Hello

  I need to display a popup with a message and two buttons and based on the selection of button I want to do an action.

  I am able to display the popup screen with buttons. But the buttons do not update.

  Please find the code below. Can someone tell me where I was wrong.

  Thanks in advance.

  import net.rim.device.api.ui.*;
  import net.rim.device.api.ui.component.*;
  import net.rim.device.api.ui.container.*;
  import net.rim.device.api.system.*;
  
  class RegPopup extends Screen {
  
  private final static int _CUSTOM_SIZE = 150;
  private final static int _ALPHA = 0xBF; // 75% alpha
  private final static int _X = ( Display.getWidth() - _CUSTOM_SIZE ) >> 1;
  private final static int _Y = ( Display.getHeight() - _CUSTOM_SIZE ) >> 1; 
  
  private LabelField wait = null;
  private LabelField status = null;
  VerticalFieldManager vm = null;
  ButtonField try_button = null;
  ButtonField exit_button = null;
  
  RegPopup() { 
  
  super( new VerticalFieldManager(VerticalFieldManager.VERTICAL _SCROLL | VerticalFieldManager.VERTICAL_SCROLLBAR));
  init();
  }
  
  private void init(){
  wait = new LabelField( "Please wait ..." );
  this.add(wait);
  //this.setFocus();
  }
  public void setMessage(String message){
  if(message != null){
  status = new LabelField(message);
  this.add(status);
  this.add(new RichTextField(Field.NON_FOCUSABLE));
  addButton();
  changeMessage();
  }
  }
  
  private void addButton(){
  vm = (VerticalFieldManager)this.getDelegate();
  //vm.setVerticalScroll(0);
  //vm.setFocus();
  HorizontalFieldManager midManager = new HorizontalFieldManager(HorizontalFieldManager.FIEL D_HCENTER | HorizontalFieldManager.HORIZONTAL_SCROLL);
  try_button = new ButtonField("Try Again");
  exit_button = new ButtonField("Exit");
  // try_button.setFocus();
  
  try_button.setChangeListener(new FieldChangeListener(){
  public void fieldChanged(Field field, int context) {
  ButtonField buttonField = (ButtonField) field;
  
  closePopup();
  
  }
  });
  exit_button .setChangeListener(new FieldChangeListener(){
  public void fieldChanged(Field field, int context) {
  ButtonField buttonField = (ButtonField) field;
  
  //System.exit(0);
  
  }
  });
  
  // midManager.setFocus();
  midManager.add(try_button);
  midManager.add(exit_button);
  
  vm.add(midManager);
  
  //this.add(vm);
  
  }
  private void closePopup(){
  this.close();
  }
  /**
  * This method repaints the screen with new Message
  * Added by Koka Phani
  */
  private void changeMessage(){
  
  final Screen scr = this.getScreen();
  if(scr!= null){
  UiApplication.getUiApplication().invokeLater (new Runnable() {
  
  public void run(){
  try{ 
  
  scr.invalidate();
  
  }catch(Exception e){}
  }
  });
  } 
  
  }
  protected void sublayout( int width, int height ) {
  setExtent( _CUSTOM_SIZE, _CUSTOM_SIZE );
  setPosition( _X, _Y );
  layoutDelegate( _CUSTOM_SIZE, _CUSTOM_SIZE );
  }
  
  protected void paintBackground( Graphics g ) {
  XYRect myExtent = getExtent();
  int color = g.getColor();
  int alpha = g.getGlobalAlpha();
  g.setGlobalAlpha( _ALPHA );
  g.setColor( Color.BLACK );
  g.fillRect( 0, 0, myExtent.width, myExtent.height );
  g.setColor( Color.WHITE);
  g.setGlobalAlpha( alpha );
  }
  
  public boolean onClose(){
  return false;
  }
  }
  

  Hi all

  Thanks for your time. I found the problem. Stupid mistake not having not try catch blocks to debug.

  The problem is that I update the screen with calling the call later.

  Once again thank you for your time.

  Concerning

  Koka

• Popup problem

  Hey all,.

  I've set up a popup window to display information.  I've got 7 of them on the same page.  They all work very well, but with one problem.  The problem is that when you close the 'x' in the upper right pop, the window (for example the 7th), it runs through all the previous popup windows.  Someone would please good enough to let me know where I was wrong?  Thank you.

  The CSS for the pop-up

  <style>
  *, *:before, *:after { box-sizing: border-box; }
  
  
  .modal-container {
    margin: 0 auto;
    padding-top: 0px;
    position: relative;
    width: auto;
  }
  
  
  .modal-container .modal-backdrop {
    height: 0;
    width: 0;
    opacity: 0;
    overflow: hidden;
    transition: opacity 0.2s ease-in;
  }
  
  .modal-container #modal-toggle {
    position: absolute;
    left: 0;
    top: 0;
    height: 100%;
    width: 100%;
    margin: 0;
    opacity: 0;
    cursor: pointer;
  }
  
  .modal-container #modal-toggle:hover ~ button { background: none; }
  
  .modal-container #modal-toggle:checked {
    width: 100vw;
    height: 100vh;
    position: fixed;
    left: 0;
    top: 0;
    z-index: 9;
    opacity: 0;
  }
  
  .modal-container #modal-toggle:checked ~ .modal-backdrop {
    background-color: rgba(0, 0, 0, 0.6);
    width: auto;
    height: auto;
    position: fixed;
    left: 0;
    top: 0;
    z-index: 9;
    pointer-events: none;
    opacity: 1;
  }
  
  .modal-container #modal-toggle:checked ~ .modal-backdrop .modal-content {
    background-color: white;
    max-width: 250px;
    width: auto;
    height: auto;
    padding: 10px 30px;
    position: absolute;
    left: calc(50% - 125px);
    top: 50%;
    border-radius: 4px;
    z-index: 999;
    pointer-events: auto;
    cursor: auto;
    box-shadow: 0 3px 7px rgba(0, 0, 0, 0.6);
    overflow: auto;
  }
  @media (max-width: 300px) {
  
  .modal-container #modal-toggle:checked ~ .modal-backdrop .modal-content { left: 0; }
  }
  
  .modal-container #modal-toggle:checked ~ .modal-backdrop .modal-content .modal-close {
    color: gold;
    position: absolute;
    right: 0px;
    top: 0;
    padding-top: 7px;
    font-size: 16px;
    width: 25px;
    height: 28px;
    font-weight: bold;
    text-align: center;
    cursor: pointer;
  }
  
  .modal-container #modal-toggle:checked ~ .modal-backdrop .modal-content .modal-close.button {
    top: initial;
    bottom: 20px;
    right: 20px;
    background: none;
    color: #fff;
    width: auto;
    padding: 7px;
    border-radius: 2px;
    font-size: 14px;
    font-weight: normal;
  }
  
  .modal-container #modal-toggle:checked ~ .modal-backdrop .modal-content .modal-close.button:hover {
    color: #fff;
    background: none;
  }
  
  .modal-container #modal-toggle:checked ~ .modal-backdrop .modal-content .modal-close:hover { color: white; }
  
  </style>
  

  PHP for each of the Pop Ups

  // total hours
  
  $total_hour_msg = "This is calculated by adding your Paid Hours (".$tot_hrs_pd.") to your Total Unpaid Hours (".$total_hours_unpaid.").";
  
  echo "<tr><td>";
  echo "<div class=\"modal-container\">";
    echo "<input id=\"modal-toggle\" type=\"checkbox\">";
    echo "<button style=\"border: none; background: none;\">Total Hours <img src=\"images/help.png\" style=\"height: 18px; margin-left: 15px;\"></button>";
    echo "<div class=\"modal-backdrop\">";
      echo "<div class=\"modal-content\">";
        echo "<label class=\"modal-close\" for=\"modal-toggle\">x</label>";
        echo "<span>".$total_hour_msg."</span></a></td><td style =\"min-width: 25%; width: auto;\">".$total_hours."</td></tr>";
      echo "</div>";
    echo "</div>";
  echo "</div>";
  echo "</td></tr>";
  

  You use the same ID 7 times more. It takes trouble.

  Personally, I would have a modal dialog box with the content transmitted through variables.

  What follows is a modal (Bootstrap) which shows a YouTube video when the user clicks on a link

  and here's the JavaScript code to manage content and modal behaviour.

  // BOOTSTRAP 3.0 - Open YouTube Video Dynamicaly in Modal Window
  // Modal Window for dynamically opening videos
  $('a[href^="http://www.youtube.com"]').on('click', function(e){
  // Store the query string variables and values
  // Uses "jQuery Query Parser" plugin, to allow for various URL formats (could have extra parameters)
  var queryString = $(this).attr('href').slice( $(this).attr('href').indexOf('?') + 1);
  var queryVars = $.parseQuery( queryString );
  
  // if GET variable "v" exists. This is the Youtube Video ID
  if ( 'v' in queryVars )
  {
  // Prevent opening of external page
  e.preventDefault();
  
  // Calculate default iFrame embed size based on current window size
  // (these will only be used if data attributes are not specified)
  if ($(window).height() < $(window).width()) {
      var vidHeight = $(window).height() * 0.7;
      var vidWidth = vidHeight * 1.77777;
  } else {
      var vidWidth = $(window).width() * 0.9;
      var vidHeight = vidWidth / 1.77777;
  }
  if ( $(this).attr('data-width') ) { vidWidth = parseInt($(this).attr('data-width')); }
  if ( $(this).attr('data-height') ) { vidHeight = parseInt($(this).attr('data-height')); }
  var iFrameCode = '';
  
  // Replace Modal HTML with iFrame Embed
  $('#mediaModal .modal-body').html(iFrameCode);
  // Set new width of modal window, based on dynamic video content
  $('#mediaModal').on('show.bs.modal', function () {
  // Add video width to left and right padding, to get new width of modal window
  var modalBody = $(this).find('.modal-body');
  var modalDialog = $(this).find('.modal-dialog');
  var newModalWidth = vidWidth + parseInt(modalBody.css("padding-left")) + parseInt(modalBody.css("padding-right"));
  newModalWidth += parseInt(modalDialog.css("padding-left")) + parseInt(modalDialog.css("padding-right"));
  newModalWidth += 'px';
  // Set width of modal (Bootstrap 3.0)
  $(this).find('.modal-dialog').css('width', newModalWidth);
  });
  
  // Open Modal
  $('#mediaModal').modal();
  }
  });
  
  // Clear modal contents on close.
  // There was mention of videos that kept playing in the background.
  $('#mediaModal').on('hidden.bs.modal', function () {
  $('#mediaModal .modal-body').html('');
  }); 
  

  Note my use of an ID because it occurs only once in my document.

  See run at BunchOBlokes - videos

• After refresh in Internet Explorer popup problem (404)

  Hey there,

  We use JDeveloper 11.1.2.3.0.

  We have an index (jsf) page that contains a model and a dynamic region.

  During his connection, we decide what TF (bounded, fragments of the page) to load in the region (we have 2 main TF who call other 'sub' TF).

  When we have one open a random popup (based on a TF, stubborn, no fragment of page) the first time that everything works as expected but when switch us to another language and try to open the same / another pop-up window, we get a 404.

  This problem occurs in IE8, IE9 and IE10 (perhaps in other versions as well) and in all environments (local, dev, prod,...). When loading of the pop-up window, we see the content for a few milliseconds and then comes the 404.

  The access log example:

  06/Aug / 2013:14:32:40 + 0200 < IP > GET /astm/faces/team-responsibles-add-edit-train-btf/select-teams HTTP/1.1 200
  06/Aug / 2013:14:32:40 + 0200 < IP > GET /astm/faces/team-responsibles-add-edit-train-btf/select-teams?_adf.ctrl-state=1cnndlhzmq_43 HTTP/1.1 404

  
  

  When we move from the language, a full page refresh happens (using

  JDeveloper, Oracle ADF & amp; amp; Java: Refresh the Page in Oracle ADF by Code Java

  ).

  The problem only occurs in Internet Explorer and that if we open a popup before we go to another language. No newspaper in JDeveloper NI WLS.

  
  

  This thread is somewhat similar:

  Fields disappear in Internet Explorer 8 and 9

  The user suggested replacing the parent calls with TF-calls, but we already use this approach.

  Any help would be appreciated.

  The problem lied with the refresh of the page. For some reason, IE couldn't handle the new root of the view.

• Popup problems

  Hello
  
  Here is my site: www.livepraylove.com
  
  Thank you very much for taking the time to help me with this problem. We used popup windows controlled on the first page of our site for some time. The built-in flash is the bar announcement in the middle of the page. By "controlled" popups, I mean that the size of the window is exactly 600 x 400 and it does not resize, toolbar, scroll bar, the menu buttons, etc. Here is an example of a typical window allowing to open:
  
  www.livepraylove.com/directions/churchoffice.html
  
  Recently, I noticed that popups are no longer - you click on the button ' tell me more ' and nothing happens. Here is the code of the HTML, between the < head > tags. I tried it in the body of the file as well.
  
  

  Quote:
  < SCRIPT LANGUAGE = "JavaScript" >
  <!-begin
  function Launch (page) {}
  OpenWin = this.open (page, "Popup", "toolbar = no, menubar = no, location = no, scrollbars = no, resizable = no, width = 600, height is 400");
  }
  -> End
  < /script >

• Shuttle Popup problem

  Hello
  
  I'm struggling with this problem for a few days. I have popup containing the shuttle and a "submit" button. User can select values in the shuttle and on submit I want the value to be entered in the text box on the homepage as a comma-separated string. The first TI looked simple, but when I started to be implemented, I'm dealing with a lot of problems. What I've done,
  1. to send popup - after calculations and Validations, I called a process of PL/SQL
  DECLARE
  l_selected APEX_APPLICATION_GLOBAL. VC_ARR2;
  v_valPass varchar2 (200);
  BEGIN
  -Convert the string two points separated values in a PL/SQL table
  
  l_selected: = APEX_UTIL. STRING_TO_TABLE(:P2_POPUP_SHUTTLE);
  
  -Loop on the table to build the string to pass to the back
  BECAUSE me IN 1.l_selected.count
  LOOP
  IF i = l_selected.count
  THEN
  v_valPass: = v_valPass | l_selected (i);
  ON THE OTHER
  v_valPass: = v_valPass | l_selected (i) | ',';
  END IF;
  END LOOP;
  : P1_MAINPAGE_TEXTAREA: = v_valPass;
  END;
  
  with the above code, I can't get value: P1_MAINPAGE_TEXTAREA with ONLY to refresh the page, but I do not want to refresh the home page. so I thought this value through javascript by adding code to the PL/SQL block above below.
  --------------------------------------------------------------------------------------
  -the comma separated in application value point F115_HUC_VALUE
  APEX_UTIL. SET_SESSION_STATE ('F115_HUC_VALUE', v_valPass);
  -(Get_temp_val) function to get the value of the item Application F115_HUC_VALUE see code below
  HTP.prn (get_temp_val); -able to get to this point
  HTP.p ("< script type =" text/javascript"> '");
  HTP.p ("alert (" value = > "+ ' |)") get_temp_val |') ;") ; -Here I get the error message
  HTP.p ('opener.document.getElementById (": P1_MAINPAGE_TEXTAREA") .value = ' | get_temp_val |) ';');
  HTP.p ('window.close ()');
  HTP.p ("< /script >");
  END;
  
  -----------------------------------------------------------------------
  create or replace FUNCTION get_temp_val
  RETURN VARCHAR2
  AS
  BEGIN
  V RETURN ('F115_HUC_VALUE');
  END;
  ---------------------------------------------------------------------------
  The problem here is that if the value is comma, after this line, I get the error message.
  HTP.p ("alert (" value = > "+ ' |)") get_temp_val |') ;") ;
  How to read the value of PL/SQL in javascript?
  
  Is there a simple way to implement the functionality I'm looking for?
  
  booth.

  Hello:

  You can not call a pl/sql JS function, as you seem to do. What you are trying to achieve can be done as follows

  Delete the page defined process to format the value of P2_POPUP_SHUTTLE etc.
  Change the target of the button that submits the pop-up to be URL
  For the URL, specify

  javascript:setValue()
  

  Define a process named 'FORMAT_STRING' with a process "at the request...". ».
  Use the code below for the application process

  DECLARE
  l_selected APEX_APPLICATION_GLOBAL.VC_ARR2;
  v_valPass varchar2(200);
  BEGIN
  -- Convert the colon separated string of values into a PL/SQL array
  
  l_selected := APEX_UTIL.STRING_TO_TABLE(:P2_POPUP_SHUTTLE);
  -- Loop over array to build the string to pass back
  FOR i IN 1..l_selected.count
  LOOP
  IF i = l_selected.count
  THEN
  v_valPass := v_valPass || l_selected(i);
  ELSE
  v_valPass := v_valPass || l_selected(i) || ',';
  END IF;
  END LOOP;
  :P1_MAINPAGE_TEXTAREA := v_valPass;
  htp.prn(v_valPass);
  END;
  

  Add the JS below into the HTML of the page popup header

  CITY

• outer join and LignesMax problem left

  I'm having a problem with the method and an sql join. My left table includes some documents that I want in the list, max 25 per page. These records have some notes are related in another table that is outer joined. When I specify the method in my cfoutput tag it includes my external joined table rows. So I could only go 5 records in my table left and 20 of my attachment table. What I want is 25 records in my table on the left and however the number of records in the table on the other that could be associated with these 25 records. Is this possible?

  I make two requests and avoid the outer join in this case:

• a Pavilion a 6212n windows vista desk top. popup problem

  After that record on a pop up appears, windows has encountered a critical problem and will restart in one minute, and then it restarts, this is the case whenever I connect. It is a pavilion desk top of page a6212n. How can I prevent the computer from restarting on its own... Thank you

  Hello

  1 did you change on your computer?

  2. What is the exact error message that you receive?

  Method 1:

  I suggest you check in SafeMode with network.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  If you are able to start your computer in safe mode, I suggest you perform the clean boot and check.

  Clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  See also:

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

• Widget deployment problem

  I'm new to the blackberry widget dev process so bear with me. I have trouble getting my widget to work on the device itself. Here's what I did to get to where I am so far:

  1 developed a web application (Calculator). Coded in html, Javascript and css by hand.

  2. I made the recalcitrant xml file and images folder etc so it runs on a Blackberry device

  3. it works perfectly in the Simulator on my machine

  4. I bought, received and installed the signing keys. I think this has been done correctly because I followed the documentation and he went to the way it was supposed to, so know a reason to think that the keys are bad.

  5. update of the widget with the widget of REM conditioner.

  6 use BlackBerry desktop software to install the files on the device .alx file

  Now, I have it on the device and I always get the error "trying to access a secure api."

  What I am doing wrong? Any help would be awsome.

  D.

  When packing your widget, you must use the indicator/g so that she could sign the COD file, as part of the build process.

  You can sign your application later too.  To do this, run the SignatureTool.jar file located in the BlackBerry Widget SDK installation directory bin, select your COD file and click on the button request Signatures.

• How to get out the widget from a remote php file

  I want to leave the remote one froma widget php file, I use the onExit

  function trapForApplicationExit()
    {
        blackberry.app.event.onExit(handleExit);
    }
  
    function handleExit()
    {
           var answer = confirm("Leave this application?");
           if (answer)
             blackberry.app.exit();
    }
  

  who needs to add the function blackberry.app.event in my config.xml file, the question is how can I add this feature to the remote files on the server?

  In your config.xml file where you have in your external domain name whitelist, you will also want to add the feature as an element element nested.

  For example:

  http://www.mydomain.com" subdomains="true">
    
  
  

  This will allow the API run in the external domain.

• Windows credentail Manager / SSO question, hope someone can help me out on the following problem that concerns me a fews months ago.

  Currently, our network has replaced a border router that connects to a Checkpoint firewall. After the replacement, the SSO service is fully does not. When you use IE to access my company's intranet, he invites me user intranet and pw whenever I close IE and reopen. I find that the credentials are already stored on the Credential Manager. However, the guest continues to show every time I run the application IE. Most users under this router with the same problem.

  In addition, the problem is not limited to EI. It happens on the Outlook as well.  I would really like to know

  (1) why the credentail crib does not work?

  (2) what is the mechanism behind?

  (3) is it possible the problem caused by the firewall and router? If Yes, what should I do on them to make the window manager of credentials to work?

  Hello
   
  Thanks for posting your question in the Microsoft Community forum. We are happy to help you.
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:
  
  Windows 7 IT Pro Networking Forum: http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
   
  Kind regards.

• How to find out what is a problem at the start of vMA?

  I have deployed vMA 5.1.0.0 build 782391. Too long delay for upcoming network at the start of vMA.

  The screen of the console so that the vMA's start.

  == Provisioning agent: start ==

  
  

  Waiting for network to come (attempt 1 of 10)...

  No value found

  No value found

  How to solve this problem? Any idea?

  TIA

  The OVA model contains a CD-ROM, but system complains ' no devices found (dev/sr0). After removing the CD-ROM in the settings of the virtual machine, the boot process works very well. See: http://www.zimbra.com/forums/installation/59102-zca-8-virtual-appliance-ovfenv-returns-unable-find-ovf-environment.html

  Heiko