Out of HTML5 does not

Similar Questions

• Thunderbird greys out and says does not

  Thunderbird greys out and says does not, finally seems to work OK

  McAfee

• HTML5 does not run a tip action?

  I'm having a problem with HTML5 does not appear when I preview the project normally. I have 2 variables which I am tracking. I use them to generate a 'meter' on the slide to get back to the user. When the user makes a choice on the slide, I use an Action shared to increment or decrement the variable. Then I have a tip Action that performs a conditional action on enter displays the correct counter and mask incorrect counters. Then he stops to the slide.

  Here's my problem: it works perfectly when I use the normal preview. However, it does not work when I Preview in HTML5. I decided that if a variable is zero or less, then the advanced action fails to run. So my meters do not respond correctly and the slide break.

  As it works in normal preview, I guess my logic is written correctly.

  Any help?

  Captivate cannot recognize numbers below zero, it's the only advice I can give you a negative number is converted into a positive (-2 will become 2), has nothing to do with the output format. Zero itself is considered the same as an empty variable.

• Monitor blacks out, error message "does not signal.

  This problem just started today. My screen keeps blacking out. I checked the cables and they were good. I did a Defrag. I changed my settings to standby power screen forever. When the screen turns off, the error message is "" does not receive do not signal. "" Is this a hardware or driver problem? Thank you.

  Hello

   
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the computer?
   
  I suggest you try these methods and check.
  Method 1:
  Start your computer in last good known Configuration mode and check.
  Advanced startup options.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
   
  Method 2:
  If you find the same problem using last good known Configuration, start the computer in safe mode and check.
  Step 1:
  Start your computer in safe mode.
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  If the computer works fine in safe mode, uninstall the display driver, restart the computer in normal mode and check.
  Step 2:
  Uninstall the driver from Device Manager graphics card.
  1 right click on the computer icon
  2. Select manage from the menu.
  3. Select Device Manager in system tools that are listed in the resulting display.
  4. right click on the device.
  5. click on the driver tab.
  6. click on uninstall.
  7 restart the computer
  You can download and install the latest driver for graphics card on the computer manufacturer site.
  Graphics driver will reinstall after a reboot in normal mode, if the computer is connected to the Internet

• Camera zoom in or out blackBerry Smartphones does not not in the blackberry curve

  camera zoom in or out does not work in the blackberry 8520 curve,

  Thank you

  jiteshright wrote:

  any man more solution...

  So, after you have done this, your Zoom work? Do the reset in this way:

  With the BlackBerry powereddevice, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

• HTML5 does not not within player Oracle LMS

  I use Adobe Captivate 8.1 to develop sensitive (HTML5) courses and publication on Oracle EBS LMS 12.1.

  I can see the course at IE11 browser without problem (with verified compatibility view).

  But when running courses in the LMS (Oracle LMS) drive I get the following error:

  "The content you are trying to view is not supported in the current Mode of Internet Explorer Document. Change the Document Mode on Internet Explorer 9 standards and try to view the content again. To change the Document Mode, press F12, click on Document Mode:, and then select Internet Explorer 9 standards. "

  Verified settings compatibility mode is the default for all users of our IT, and we cannot change it.

  I tried all modes of document of F12. did not help.

  I tried to add the following to the index_SCORM.html header (first line meta), but that didn't work either:

  < meta http-equiv = "X-UA-Compatible" content = "IE = EDGE" / >

  
  

  This line supposed to override the default setting of the browser to display compatible and let the browser act like IE11 (later).

  
  

  but I guess that since OLM player is a frame based player it does not allow the substitution.

  
  

  
  

  Can anyone help?  I need of course HTML5 on OLM.
  

  
  

  After a tedious search and Discovery mission, I found the following solutions:

  1. do not user the player PROTEUS to run the course, use rather a popup window that directs the user to another window where HTML5 is supported. Here, the obstacle is to keep track with the LMS.

  2 - upgrade your OLM Oracle 12.2.4 which supports HTML5.

• Tecra M4: TV out s-video does not work with Vista

  I have windows vista ultimate on Tecra m4.
  I tried out the tv via s-video but nothing happened.
  I tried fn + f5, but it shows only Lcd choice with no other choice.

  It all works well with windows xp tablet edition, I installed the latest driver proposed by toshiba, but nothing happened.
  The same problem is still there; no tv output.

  Can someone help me

  Hello

  As far as I know that the Vista drivers are not available for the Tecra M4 at the moment.
  I checked the Vista driver download site and the M4 is not listed.
  I think you have to wait for the compatible drivers

  If you install the graphics driver, you should check the Nvidia display settings. You could choose between TV, analog and digital flat screen.
  There choose TV and configuration by device settings

• Grandsons HP Pavilion just out of guarantee does not just keeps turning.

  Typical just out of warranty.

  only failure was that did all the test on the Bios

  OLU2JM - 6MG 788 - MFPWXG - 61U403

  and gave a number of product E3B42PA #ABG

  The laptop started to take a while to load, and then more than a week got slower until in the end it never fully loaded just the HP and turns round and round points.

  has been bought in August 2013 need to know if a value is fixed. all advice appreciated.

  It seems that the hard drive has failed and needs to be replaced. They are very cheap and easily replaceable. Laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

  Maintenance and Service Guide shows how to change the hard drive:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&lang=en&LC=en&product=5404757&

• My Check Out the form does not display the SSL certificate

  Hi, the Adobe team

  I'll put up my http:www.networkarte.com/store store, and I am currently giving some CSS to my Check-Out form. I don't see form SSL icon upwards in the URL field on my browser:

  And I think that I should have something like this: .

  Your help is more than welcome.

  PD: I'm not a code guy, but just a designer. I apologize if my question is a mannequin.

  Thanks in advance,

  Diego

  Hello

  For some reason, you changed the URL of the form in an absolute url link:

  http://www.networkarte.com/FormProcessv2.aspx?WebFormID=404835&OID=523416&OTYPE=2008&Eid=0 & CID = 0 & step = 13 ">"

  Because it's you're not https domain is invalid and insecure. You must be a relative path

• Video HTML5 does not play in Firefox 10

  10 Firefox don't play the video using the HTML5 video tag.

  My page

  @cor-el - yes I know I thank you, but I have no control over the setting of server for Comcast, I tried that points to them 50 times.

  @willkg - thanks for showing me how to use the developer tools.

  Thanks for you the entry that it is very useful.

• Simple select HTML5 does not work!

  Hello

  I tried making a simple button select for a Photoshop CC Panel but when I click on it the Kangaroo seems far in the lower left corner of my screen...

  It is not yet within the application itself.

  I'm on:

  OSX 10.8.5

  Kepler Eclipse

  Here's the quick example:

  <!doctype html>
  
  <html>
  <head>
  <meta charset="utf-8">
  <script src="./ext.js"></script>
  <script src="./lib/CSInterface-4.0.0.js"></script>
  
  <link id="ppstyle" rel="stylesheet" type="text/css" href="./style.css">
  <title>Sample</title>
  </head>
  
  <body onLoad="onLoaded()">
  <div id="content">
    <ul>
      
      <li>
          <select>
              <option>Option 1</option>
              <option>Option 2</option>
              <option>Option 3</option>
              <option>Option 4</option>
              <option>Option 5</option>
          </select>
      </li>
          
    </ul>
  </div></body>
  
  </html>
  

  Yes, it is a known problem with Photoshop. I'll try to review your panel without apoint in it. Not easy as I do now!

• showing a date of entry of the Recordset, how to fill out the dates does not appear?

  I've been several different directions on it, but it can work.

  I'm trying to list a date range as Nov 1-8 November, that is to say Nov1, 2, Nov3, etc., under each date show a COUNTY recordset for this date and if there is no record for this date, indicates 0.

  I have this sql

  mysql_select_db($database_connbubba, $connbubba);
  $query_rs_count = "SELECT yard_sales.yardsale_date,DATE_FORMAT(yard_sales.yardsale_date, '%b %d') AS theDate,COUNT(*) FROM yard_sales WHERE yard_sales.yardsale_date>=CURDATE() GROUP BY yard_sales.yardsale_date";
  $query_limit_rs_count = sprintf("%s LIMIT %d, %d", $query_rs_count, $startRow_rs_count, $maxRows_rs_count);
  $rs_count = mysql_query($query_limit_rs_count, $connbubba) or die(mysql_error());
  $row_rs_count = mysql_fetch_assoc($rs_count);
  

  
  user publishes their yard sales information in the db and the yardsale_date column is date YYYY-MM-DD

  with this configuration, so I have a table with 2 lines (rs_count.theDate and rs_count. COUNT) and the table is repeated horizontally.

  so the result is

  2 Nov6 Nov8

  1 yard Sale 2 Yard Sale 1 Yard Sale

  How can I get

  Nov2                 Nov3                   Nov4                 Nov5                   Nov6                      Nov7                  Nov8

  1 yard Sale 0 Yard Sales 0 Yard Sales 0 Yard sale Yard Sales 0 Yard Sale 1 Yard Sale 2

  Thanks for your help,

  Jim balthrop

  You cannot display the data that do not exist, so you must first create another calendar table which includes all the possible dates. You can then join this table to your main table. Pull on the dates of the calendar table and count the number of sales in your main table. To group the dates table.

• out of cRIO does not turn on

  Hi all

  In a part of this project, I need to:

  -Wait a specified period of time

  -turn on output

  -wait for a specified time

  -disable output

  In fact, there may be 5 of them running at the same time, each in a Subvi.

  The code seems simple enough, even for me, but the result never comes. It seems that he wants to wait until the elapsed time, which is of course too late.

  Attached is a picture of what is obvious first try.

  Knowing that shared variables can have a delay, I added a while loop to make sure he was on, but he always goes through the process without ever turning the output.

  I also replaced the wait function with the function of delay with the same result.

  Any ideas?

  Paul

  Never mind. My bad. The duration is set to 0.

• Clear out when it does not

  I'm under LabView 8.6 with modules USB-6525. Is there a way to 'Clear' automatically or set the outputs false when the VI is stopped? I know that I could do set them to false after the Stop button on my time loop is in a hurry, but it would be nice to automatically.

  Thank you

  Jason

  N ° guests ends their set to false before your VI actually.

• Publish HTML5 does not

  In the video below you can see how it works only to publish once the publish everything after is the same as the first. When I save the .fla with a new file name the publication work, but once again only once. The oddest thing is that I'm having this problem on my Macbook pro and my iMac.

  Publish the demo - YouTube

  Update: seems to work when I use firefox as a browser standard. I guess that means this could be a problem of Chrome.