Out of the box Alpha stuck in the loop of repair

Similar Questions

• I get my email on two computers. How to make a computer out of the loop?

  I get my email on two computers. How to make a computer out of the loop without jeopardizing my Comcast email account?

  Using Outlook Express? Go to: tools | Accounts and delete the account. If you think you can it in the future, go to the properties of the account, and under the general tab, simply uncheck: include this account when receiving or synchronization.

  If you are interested, you can receive messages at a time without losing them on one.

  On both machines:

  Tools | Accounts | Mail | Properties | Advanced - Check: leave a copy of messages on the server.

  On a single computer only, make sure to delete messages after X days to satisfy your allocated space that you get from your server.

• Why out of the loop after a managed exception is thrown

  I am trowing a custom exception inside a nested for loop. The execption notes, however, both the inner and outer loop output once the exception is thrown. I tried to add a continue statement, but that has not solved the problem.

  Jet moves execution of capture, closing the loop.  You can send a cancelable event instead.

• BlackBerry Smartphones how out of the loop of ID

  My old BB Bold died on me - and I mean dead. No discount to zero and even the Desk top manager doesn't recognize it. I bought a Torch 9800 has changed the SIM card and it worked fine, until it came to the e-mail set up. I could remember my user name but not the password. I duly clicked 'forgot password' and back came the answer password sent to your B'berry. Probably at my "BOLD" dead. Because I can not access my mail to set the address on the new torch, because I need the password, I'm stuck here. I went to the site of B'berry ID, punch in the username and they too want to sent me a password to my address B'berry. I tried my service provider to get the password. Once more sent to my address mobileemail. They do not provide access to my address mobileemail, web-based as well as possibility of password recovery was released. I tried to go back and recreate a new user ID. No problem until I come to the e-mail address, how I threw because the address is already in use - no surprise, except that I can't use it.

  Is there someone who can suggest a way out of this? Short of renouncing the B'berrys and the purchase of an another smart phone providers.

  PVW

  Thank you very much for your promt reply. I tried your advice/suggestions, but without success. I can only conclude that your point about the dangers of use BIS for the was/is the real pitfall BBID enamel only. My provider has been particularly useless and made disparaging remarks about the problems caused by the so-called B'berry accounts 'package '. The megastore where I bought my BB Bold faithful a few years before, is more about B'berrys and were unable, rather reluctant to help. Europe becomes a wilderness of B'berry. So, I think after 10 years of happiness of Blackberry and three days of effort wasted his defeat in face of time and switch to another system.

  Thanks again for your help. You can't win them all; as the proverb says.

  PVW

• Fade in - fade out of the loop of bg

  Hello world!
  I do a button / stop a single game - stops a loop of bg.
  
  It's the chronology AS:
  
  setVolumen = function (soundObj, startLevel, maxLevel, Inc.) {}
  soundObj.setVolume (startLevel);
  this.createEmptyMovieClip ("loopSound", this.getNextHighestDepth ());
  startLevel < maxLevel? flight = Inc.: flight = - inc;
  this.loopSound.onEnterFrame = function() {}
  startLevel += flight;
  soundObj.setVolume (startLevel);
  If (soundObj.getVolume () == maxLevel) {}
  delete loopSound.onEnterFrame;
  }
  };
  };
  musica_ambiente = new Sound (this);
  musica_ambiente.attachSound ("ambience");
  
  musica_ambiente.setVolume (0);
  musica_ambiente. Start (0, 9999);
  setVolumen (musica_ambiente, 0, 50, 0.5);
  
  
  and these are the ACEs to control:
  OFF:
  setVolumen (musica_ambiente, musica_ambiente.getVolume (), 0, 0.5);
  on:
  setVolumen (musica_ambiente, musica_ambiente.getVolume (), 10, 0.5);
  
  I don't know, I made 2 buttons and put'em inside one movieclip (the one in the first picture) and the other in the second and added'em the previous ACE with gotoAndStop (1); and gotoAndStop (2); but it does not work...
  
  can someone help me make it work?
  
  Thank you very much in advance!
  
  Cheers!

  gdmt wrote:
  > thanx 4 reply!
  > Yes, I know urami_...
  > I tried absolute and relative target paths...
  > but... nothing...

  Because that function is located on the _parent, and the musica_ambiente object sits on the _parent
  you will need to use several _parent prefix in the path.

  _parent.setVolumen (_parent.musica_ambiente, _parent.musica_ambiente.getVolume (), 100, 0.5);

  However, you can create a feature on the parent who makes the complete call:
  function fadeOutAmbiente() {setVolumen (musica_ambiente, musica_ambiente.getVolume (), 0, 0.5) ;}}
  and then you just call that since the movieclip: _parent.fadeOutAmbiente ();

  If you have several different sound objects on the same scope you want to fade out of
  different fields of application, you can go further and make a function like this:

  function fadeOut (soundName) {setVolumen (this [soundName], this [soundName] .getVolume (), 0, 0.5) ;}}
  and then you call: _parent.fadeOut ("musica_ambiente");

  In any case, I did a few changes to your original code to avoid multiple references _parent:

  setVolumen = function (soundName, maxLevel, Inc.) {}
  var soundObj = this [soundName]
  startLevel = soundObj.getVolume ();
  If (startLevel == maxLevel) return; Give up if no change is necessary
  Inc = Math.ABS (inc) * (startLevel
  If (this.loopSound) this.loopSound.removeMovieClip (); Kill the old tween volume

  var mc = this.createEmptyMovieClip ("loopSound", this.getNextHighestDepth ()); Create movieclip temp
  mc.onEnterFrame = function() {}
  soundObj.setVolume(startLevel += inc);
  If (soundObj.getVolume () == maxLevel) {}
  delete loopSound.onEnterFrame;
  this.removeMovieClip (); Kill the temp movieclip
  }
  };
  };
  musica_ambiente = new Sound (this);
  musica_ambiente.attachSound ("ambience");
  musica_ambiente.setVolume (0);
  musica_ambiente. Start (0, 9999);
  setVolumen ("musica_ambiente", 100, 0.5);

  ///////////////

  Fade Out

  on (release) {}
  _parent.setVolumen ("musica_ambiente", 0, 0.5);
  }

  Fade In
  on (release) {}
  _parent.setVolumen ("musica_ambiente", 100, 0.5);
  }

  NOTE!

  He must now also melted even though you click another fade is underway
  because he has killed the old one before creating the new.

  --
  Best regards

  Urami

  --

  !!!!!!! Merry Christmas!
  &
  Happy new year

  
  If you want to send me a message - DO NOT LAUGH at MY ADDRESS
  

• Problem on the out of the loop For of Cluster

  Hello!  I'm using Labview 2009.

  I have a problem in the transmission of the indexed number of a loop through function array-cluster to a cluster. Please check my attachment... The problem is, he always says the number of items in the numbers indexed is 9, any number of loops, I input for loop.

  This problem has been solved before? I could not find any related post here...

  Raymond

  Hey Vg,

  You have to right click on your table to the cluster, goto 'Size of Cluster' function and select, in this case, 2.

  RGS,

  Lucither

• Out of the LOOP FOR...

  I'm having a problem with the output format
  
  Oracle 10.2 g
  
  Data
  

      time                                  home_team_id      away_team_id     home_team_name      away_team_name  offensive_player_moniker  offensive_player_last_name
  11/14/2003 7:39:00 PM                       11122                                                    parks                                               Steve             Smith                    
  11/14/2003 7:32:00 PM                                                24555                                                    bombers                  Chris              Carter                
  12/14/2008 1:35:00 PM                                                33211                                                         carts                   Marty            Booker   
  12/14/2008 1:30:00 PM                      15555                                                    sharks                                                 Bob              Sanders
  12/14/2008 1:38:00 PM                      15555                                                    sharks                                                 Marvin           Harrison

  portion of LOOP FOR

   FOR ii IN 1..player_results.COUNT LOOP  
              
            If player_results(i).shot_result = 7 then
            
                  If results_temp(i).home_team_id = player_results(ii).team_id then
                          tDataStream :=  xArcPara || results_temp(i).home_team_name || ': ' || player_results(ii).moniker || ' ' || player_results(ii).last_name || ' ('  ||  player_results(ii).time || ')';
                  End if;    
                   
                  If results_temp(i).away_team_id = player_results(ii).team_id then
                        tDataStream :=   xArcPara || results_temp(i).away_team_name || ': ' || player_results(ii).moniker || ' ' || player_results(ii).last_name || ' (' || player_results(ii).time || ')';
                  End if;
  
       End if;
           
                  writePlainLine(tDataStream); 
  
       End Loop;

  Output Curren
  
  Carts: Marty Booker (01:35)
  Sharks: Bob Sanders (01:30)
  Sharks: Marvin Harrison (01:38)
  
  What I want
  Carts: Marty Booker (01:35)
  Sharks: Bob Sanders (01:30), Marvin Harrison (01:38)
  
  structuring basically the vairable tDatastream would be my guess as to the whole issue... everything but on how to get my desired output?

  Note of course on your complete logic, but why bother with a loop around anyway? :

  SQL> with t as (
   select to_date('11/14/2003 7:39:00 PM','MM/DD/RRRR hh:mi:ss pm') time, 11122 home_team_id,null away_team_id,null home_team_name, 'parks' away_team_name,'Steve' offensive_player_moniker, 'Smith' offensive_player_last_name from dual union all
   select to_date('11/14/2003 7:32:00 PM','MM/DD/RRRR hh:mi:ss pm'), null, 24555, null, 'bombers', 'Chris', 'Carter' from dual union all
   select to_date('12/14/2008 1:35:00 PM','MM/DD/RRRR hh:mi:ss pm'), null, 33211, null, 'carts', 'Marty', 'Booker' from dual union all
   select to_date('12/14/2008 1:30:00 PM','MM/DD/RRRR hh:mi:ss pm'), 15555, null, null, 'sharks', 'Bob', 'Sanders' from dual union all
   select to_date('12/14/2008 1:38:00 PM','MM/DD/RRRR hh:mi:ss pm'), 15555, null, null, 'sharks', 'Marvin','Harrison' from dual
  )
  select away_team_name || ': ' || xmlagg(xmlelement(e, offensive_player_moniker || ' ' || offensive_player_last_name || ' (' || to_char(time,'hh:mi') || '), ')).extract('//text()') x from t
  group by  away_team_name
  /
  X
  --------------------------------------------------------------------------------
  bombers: Chris Carter (07:32),
  carts: Marty Booker (01:35),
  parks: Steve Smith (07:39),
  sharks: Bob Sanders (01:30), Marvin Harrison (01:38), 
  

• Windows 8 is stuck in a loop of repair.

  I tried to reset my Acer Aspire V5 when I accidentally cancelled the reset process, and now all my laptop says when it starts is just 'preparation auto repair', and then it goes black and then she said "your PC Diagnostics."

  Important details:

  -Impossible to access desktop, start menu or anything

  -Tip F11 does not work

  -Laptop computer has no disk drive.

  If anyone of you could help me, that would be great.

  Hello

  What is the brand and model of your laptop?

  You will have to contact the computer manufacturer to get the disc or product key installation. If you get the product key, you can create windows 8 installation media as described in my previous post and then continue troubleshooting.

  Please keep us informed on the status of the issue to help you further.

• Satellite C660 - 115 Win7 update stuck in the loop. SOLVED!

  I have a Satellite C660-115 which is stuck in a loop "of despair".
  I am a COMPUTER engineer support and a customer brought this laptop of mine, who was stuck in a loop of repair Win7 (64-bit prem) that simply says Win7 could not be repaired.

  I backed up the profiles of subscribers using Hiren boot CD (done chkdsk as well - everything is OK), and then did a factory restore.
  No problem at all with the restoration.

  Started doing the updates for Win7; SP1 seems to install OK without errors.
  The system then picked up 37 Win7 updates automatically and asked to reset.
  Upon reboot, Win7 entered "drvload.exe" and started an auto repair.
  It took time and the system started OK, but without any sign of SP1, looks so much like system restore to an earlier point?

  I though this update to process 3 times now and each time after that a lot of auto update, the same sequence occurs.

  How to exit this loop? What is causing this problem, which I have never seen before?

  No software has been installed, other than that of the recovery process.
  I even uninstalled McAfee, just in case this could be a problem - no change.

  Ah, just took another look. It is stated in Win7 system registers that the restoration was caused by a corrupted file C:\ci.dll. Google to find it was a sign by a rootkit virus in the HARD Master Boot Record disk (the file ci.dll itself is NOT damaged). Found a fix tool

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  It identified the rootkit and removed.
  Seems to be OK now!

  Hope this post could help others.
  Of course, the factory restore does not erase the HDD MBR rootkit...

  Thanks for sharing!

• Samples buffered not updated in the loop For

  Hello.

  I'm having some trouble with DAQmx Read.

  I have 2 cards USB 6509 making a digital output to solve some multiplexers and I want to measure differential voltage

  using 2 boards of 6255 USB. I have a sample clock shared for 6255 boards through a PFI line. Unfortunately

  6509 boards do not allow for the synchronization of hardware I can say.

  So, to synchronize the functions I used a flat sequence to ensure that multiplexers are processed before acquiring the data of voltage

  and as you can see on the VI (LabVIEW 8.6) I use a loop to run 16 iterations and build a table with these data.

  The problem is that sometimes I get is error 200287 or 200010. And when I don't get an error, the data of 16 iterations

  is the same and it is incorrect because I'm monotoring the data to enter into the 6255 boards using a multimeter and data do not match.

  I seems to me that the analog input is read-only data iteration and I can't understand why.

  Also this VI takes a long time to run and it freezes for a few seconds on a few iterations.

  Can someone take a look at the VI and enlighten us please?

  I'm really stuck on this part.

  Thanks in advance.

  See you soon.

  Rui

  Rui,

  Well-that the code has sufficient space to improve performance!  Other than samples obvious to read the error that was made out, I recommend:

  • Read the excellent post from Sean earlier today!
  • Use "master of task.vi" to commit the task before starting the loop - as you have tasks enter the loop 'unverified' and so for each iteration tasks are verified, reserved, committed, started, stopped, no committed, without reserve and unverified. That's a lot of unnecessary work behind the scenes!
  • Do not pass 30000 as a sample to the slave task rate HAVE read the actual sampling frequency of the main task of a task property node and pass a LARGE value this actual sampling frequency to the task of the slave (sample rate can get under duress and you cause a bit of a problem)
  • Bring your constants out of the loop, that the 8.6 compiler doesn't have some of the modern optomizations available for reading constant each iteration is frowned on
  • Check your version of DAQmx.  You want more 9.1 to avoid the bug of the autostart.

• Output of MatlabScript in the matter of the loop

  Hello everyone, but long time reader first time poster, and I was wondering if I could get help to a little problem here, or... Well, more like a question and not a problem.

  I don't download the .vi because I don't think it will be necessary, in addition, ignore the rest of the image (I just play with image processing like I taught him) and go to the location of the matlab script.

  My goal is to represent the image (taken from image data) bit and in the end, it must look like to... a table of 8 columns and all the lines she might need (can't see all of the lines of course) so it will look like a matrix.

  For example, it should look a bit like this on the user Panel
  | 1. 0 | 1. 1. 0 | 1. 0 | 1. (first 8 bit value)

  | 1. 0 | 1. 1. 1. 0 | 1. 0 | (8-bit second value)

  etc...

  So for that, I use the matlab de2bi function and the release of this part is where my problem is, im putting out 8 columns representing each number comes from the image and well, im confused as to what is going out of the matlab function and the loop, as you can see in the picture I have uploaded, I put a flag in the output of 'bin '. , was automatically called Real, inside the loop and the other digital, outdoors, also, I disabled the index of the tunnel in this output. (if I activate the index, it comes out as a table)

  I thought that Real and Numeric to be showing the same thing, but when I run it, which doesn't seem to be the case, you Real shows the 1 and 0 (I guess it shows the 8 bits because it shows figures but I saw in the matlab command window and there are 8 bits stored in 'bin') and digital remains just at 0 its almost as if nothing were happening out of the loop, and because I'm not sure what it is falling I can't really find a way to show the bits as in the example, I said before.

  Read the help of de2bi, it is said that his exit is a matrix if the input is a vector, but I don't think it's a vector since due to the loop, it takes value by value, then it must go to the default (in binary) value too...

  Thanks for the help in advance, in addition, whether something else to better understand my problem please say so and I will do my best to make it easier to understand.

  

  I don't know why you're so obsessed on matlab, LabVIEW can do all this much simpler directly. Here's a possible solution. (LabVIEW 8.5. For other possible outputs you could reverse the Boolean array, so modify them.).

  

  (Your main mistake under matlab is that your output of matlab is defined as a scalar value, then it should be a vector. Your tunnel to exit of the matlab node has the wrong data type.)

• Then the loop or VI runs more slowly, and then demanded

  Hello LabVIEWists,

  I developed a small VI for the monitoring and recording of data. Unfortunately, the while loop, I use to ask for samples of each iteration is not execture as fast I asked by placing a hold until the next ms VI. Even if I change the time of 100 ms to 10 ms, execution speed does not change.

  Anyone has any idea why?

  

  File IO is generally slow.  One thing you could do to speed to the top of your loop is to move the screw of file spreadsheet reading out of the loop and use autoindexing to iterate through your columns.  You should probably use Transpose table 2D to the index on the size you want.  Also, you loop must be a loop FOR.

• is this a correct way to write data every time the loop is executed?

  I created a VI, and my goal is to save data every time the loop is executed. So far, I only learned to write binary file... I wish I could write numeric value directly...

  The only problem is that I am not if my method is correct, because I'm afraid that each time that the loop is executed, the previous binary data will be replaced... I don't want that occur.

  Do you think that my logic is appropriate in what concerns the registration data?

  Thank you!

  Your logic is fine. You replace data because the file pointer will be that your data is written. If your program stops, and then you restart, and you want the data to add to the file, you can use the file value position VI and the pointer value 0 bytes of the end. set this position once, after you open the file (so out of the loop) and then data will be added.

  If what you mean by "write a number directly," is to write something in a human newsfeeds format, you can use writing to text file instead of writing to a binary file. Then, use the VI format string or fractional number string VI to convert your double into a string and write it.

• Notifier release outside of the loop of consumption

  Hi all

  I use a notifier to a stop button.  My stop button was not stop in one of the cases (1 error to wait on the notice in hand MTTF.vi).  I've highlighted the code and noticed that when I pressed stop, the notifier has been released prior to notifying the consumption loop.  When I published the notifier outside the loop of consumption, my error has disappeared.

  Looks like a simple fix which is awesome, but ine everything I've read or seen so far, that the release was out of the loop of producer.  Is there a drawback to doing it this way?

  A more common way to deal with this should treat a mistake to wait on notice as a stop condition, because the error indicates that the notifier has been released, and the only way that can happen is that the loop of the producer ended.

  The way you described, you could get in a situation where the producer loop stops but the consumer does not and since the Notifier is not released until the consumer left, the loop of the consumer will never stop because he always waits for a notification that will never come (but the declarant is still valid, if it continues to wait).

• How to read the data processed on frm loop on each iteration of the loop?

  Hello...

  I need to display numbers as 1, 2, 3... constantly using the loop on each iteration (IE out of the loop using threads). I generated the numbers 1 2 3... using the back power node... I can read the final value after the last iteration of the loop for.

  I connected an indicator of the loop for. This indicator displays the value as a 4 If the number of loops that 4. I couldn't view 1 2 3 4 an indicator of items at each iteration.

  I'm in a position to read the value of the variable on each iteration of the loop. Please help me fromthis regard...

  Thanks in advance...

  In fact, I'm programming for multiplication of two table 2D.

  I need to select the particular code to perform this action using the structure of the case. who is right for which I need to give the value select 1,2,3 to a case selector, so I finish the task. you got my point?

  Thanks for the reply