Windows 8 is stuck in a loop of repair.

Similar Questions

• Windows XP is stuck in a loop, saying it must be enabled. I never have the wizard or it never activates.

  Activation problem

  I had to 'fix' a WinXP installation. Now I'm stuck in a loop, saying it must be enabled. I never have the wizard or it never activates. What should I do?

  It is same in 'safe mode' (I think that CTRL + ALT + DELETE)? Can you try to connect as administrator account (this account must be in "safe mode" and his name is administrator)

  If it the same - next you can try - press F8 during boot and in the menu select ' last good known Configuration":

  http://support.Microsoft.com/kb/307852/en

  LC

• Out of the box Alpha stuck in the loop of repair

  Just got my new Alienware Alpha, plugged into the TV (Panasonic TC-P42ST60), and set up as usual, but after turning on it starts up to the Alienware logo then restarts, after reboot it gets captured it repair your PC loop, finally giving me the blue screen of troubleshooting.

  I tried to use system restore to factory Dell but it is always the case. When I try to start in safe mode, that it says windows need to finish to install everything first and then restarts.

  I am stuck in a loop.

  I managed to pinpoint the problem.

  I plugged the Alpha on an Asus computer screen, then he worked as usual, it seems that Alpha can't handle the EDID HDMI to Panasonic TV. I noticed at the start that he said 1080p@50Hz instead of 60 Hz and this was to launch Windows.

  I'm going to continue with the installation via screen Asus and I hope that force 60 Hz in display settings, so it does not work with the TV.

• Windows Vista is stuck in the loop of update, install update 3 of 3, 0% complete.

  I don't have a Vista CD and I can not function in safe mode because it continues to bring back me to the loop. Please notify.

  Hello

  1. you made any hardware or software changes to the computer?

  2. which update is installed?

  3. have you started the installation of updates?

  You can try the troubleshooting provided in the link steps to solve the problem.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note: If the steps above do not work, you will need to contact your hardware manufacturer.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

• Windows 8 is stuck in a loop of auto repair

  My windows 8 get in a loop of auto repair and he couldn't fix it. And what he said journal file d:\windows\system32\logfiles\srt\srttrail.txt

  What should do?

  Hello Coonut,

  Thank you for your reply,

  I suggest you to connect to any other computer and create a floppy disk to install Windows 8. Using this disk, you can run the troubleshooting methods listed below.

  See the link to create the Setup disk:

  How to create the installation media for a PC refresh or reset:
  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  wish you a happy new year!

  Thank you

• Acer Aspire 5551 G Windows 7 pro stuck in reboot loop

  Hello

  My Aspire 5551 G does not start for win7.

  I just updated my BIOS from 1.06 to 2.14, after he asked to restart I did and it does not start since that.

  I press the power button / stop, screen shows acer and f2 for options, after which displays the list of OS, I choose to win7 and enter, it shows NORMALLY START or LAUNCH a START-UP RECOVERY I take start up normally and it shows the win7 moving colored balls, balls freeze twice and the pc shows a blue screen for less than half a second. Restarts. When I select recovery, it fails and gives the error:

  Problem event name: StartupRepairOffline

  Problem Signature01: 6.1.7600.16385

  Signature of the problem 02: 6.1.7600.16385

  Signature of the problem 03: unknown

  Signature of the 04:21199969 problem

  Signature of the problem 05: AutoFailover

  Signature of the 06:8 problem

  Signature of the problem 07: NoRootCause

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  When I was downloading new BIOS, I noticed that windows has been downloaded from the updates, so when I was installing the BIOS, the update process might have been started.

  I had some problems with VirtualDiskDrives before that. Also, I didn't empty DVD drive icon in my computer. Only the hard disk and the memory card.

  Also, I have two OS on my HDD, win7 pro and a version of ubuntun (10 + I think).

  I tried to restore the BIOS with MemoryStick and fn + esc, but it shows that some information 1 s screen and passes to the list of the OS.

  I tried to install another version of win7 but she needed driver for dvd player and I failed to find in the internet.

  Help, please.

  SOLVED

  At startup, press F2, change some settings of the drive hard ~ ASHI ~ IDE

  He probably changed during the update of the bios.

• Updates Windows has been stuck in a loop and had error message update failed, when he restored it deleted my office 2013 at home and students.

  I have the Microsoft product identifier. How can I download it turn it on for my Lenovo thinkpad?

  Hello Tina,

  Thank you for the update.

  As you said that you run refresh and reset the computer this is the reason why the Microsoft Office application that you have installed has been removed after completing the refresh as the applications that came with your PC or you installed on Windows Store will be reinstalled automatically, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

  After reset, all of your personal files will be deleted and your settings will be reset. All the apps the East came with your PC will be reinstalled, but other applications or programs will be removed.

  So, you will need to reinstall the office application and see if that helps.

  Hope this information helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Search for Windows what indexing is stuck in a loop. Error: awaiting receive indexing status

  Windows search is stuck in a loop. The message I get is: wait to receive indexing status... when I shoot to the top of the index of the button to start indexing id already depressed and does nothing. I am running Windows XP Home edition with service pack 3. Any ideas or contributions to this issue would be greatly appreciated.

  http://social.msdn.Microsoft.com/forums/en/windowsdesktopsearchhelp/thread/1e5d012a-9250-4C96-af77-81df258d758d

  read the post that precedes and also perform the following in the case of malware:

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  http://www.eset.com/us/online-scanner/ eset online scanner

  post back with some more information please, make and model of the pc, current antivirus.

  EDIT:

  http://support.Microsoft.com/kb/913503 it is a fixit for research.

• Satellite C660 - 115 Win7 update stuck in the loop. SOLVED!

  I have a Satellite C660-115 which is stuck in a loop "of despair".
  I am a COMPUTER engineer support and a customer brought this laptop of mine, who was stuck in a loop of repair Win7 (64-bit prem) that simply says Win7 could not be repaired.

  I backed up the profiles of subscribers using Hiren boot CD (done chkdsk as well - everything is OK), and then did a factory restore.
  No problem at all with the restoration.

  Started doing the updates for Win7; SP1 seems to install OK without errors.
  The system then picked up 37 Win7 updates automatically and asked to reset.
  Upon reboot, Win7 entered "drvload.exe" and started an auto repair.
  It took time and the system started OK, but without any sign of SP1, looks so much like system restore to an earlier point?

  I though this update to process 3 times now and each time after that a lot of auto update, the same sequence occurs.

  How to exit this loop? What is causing this problem, which I have never seen before?

  No software has been installed, other than that of the recovery process.
  I even uninstalled McAfee, just in case this could be a problem - no change.

  Ah, just took another look. It is stated in Win7 system registers that the restoration was caused by a corrupted file C:\ci.dll. Google to find it was a sign by a rootkit virus in the HARD Master Boot Record disk (the file ci.dll itself is NOT damaged). Found a fix tool

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  It identified the rootkit and removed.
  Seems to be OK now!

  Hope this post could help others.
  Of course, the factory restore does not erase the HDD MBR rootkit...

  Thanks for sharing!

• Update Windows stuck in a loop. Keeps trying to download page 3 of 3, but never does, then restarts and is trying to download. Can't seem to put an end to the loop.

  Update Windows stuck in a loop. Keeps trying to download page 3 of 3, but never does, then restarts and is trying to download. Can't stop the loop to try something else.

  The operating system is Windows Vista.

  I found this as a solution and to share it here, I still have questions, but thinking might help someone.

  Windows Vista and 7 update Reboot Loop Fix

  Symptom: You have a update that is causing Windows Vista or Windows 7, stuck in an infinite loop. The problem usually manifests as a "step 3 of 3:0 % complete...". "followed by a restart which starts at the exact same message, not allowing you to get on your account of connection or a desktop at all. It's a pain, and he doesn't stop, even in Mode without failure or advanced trying last good known Configuration in the start menu.

  Here is the short version for people who know how to get to tools to do this and if run System Restore from the installation DVD does not work: DELETE files

  \Windows\WinSxS\cleanup.XML AND (as applicable)
  

  \Windows\WinSxS\pending.XML and the infinite loop update will be set.

  There are two ways to get the files, you need to delete. The easiest is to start your installation of Windows and the button 'Install now' DVD, click on the link located at the bottom left that says 'Repair your computer' open a command prompt and type:

  del C:\Windows\WinSxS\cleanup.xml

  del C:\Windows\WinSxS\pending.xml

  The other way is to download a live Linux distribution such as the System of Tritech Service (which, unlike Vista or 7 DVD, can be booted from a USB flash drive for computers with no CD/DVD drive such as netbooks), open a command prompt, mount the file system and deleting the files. Assuming that your Windows installation is the first partition on the first hard disk, the following commands in rxvt or a console in the Tritech Service system should work:

  Mount.NTFS - 3 g/dev/sda1/mnt/sda1

  RM /mnt/sda1/Windows/*/cleanup.xml /mnt/sda1/Windows/*/pending.xml

  umount/mnt/sda1

  discount to zero f

  Anyway you do it, this solution will stop the engine update loop reboot and let you return to your computer. You may need to make some corrections, additional or manual updates if you have problems, but unless your login screen and/or the Office should be accessible! Is a very annoying problem and I noticed that Google is looking for things like "stage of vista 3 3 restart" usually only provides information about how to run the system on a Vista DVD restore. Unfortunately, if there is a problem with an update, sometimes the system restore does not work and fail with obscure errors, so this info is vital.

  Maybe it's your last chance to avoid giving to the top and reinstalling Windows, and we always like avoiding relocations!

• Windows vista is 63 92 updated installation and after running for seven hours must be stuck in a loop. How to regain control of my everex computer

  Windows vista is 63 92 updated installation and after running for seven hours must be stuck in a loop. How to regain control of my everex computer

  Hello

  1. have there been recent changes to the system before the show?

  2 is the issue limited to the installation of Windows updates?

  3. do you have security software installed on your system?

  Method:

  Follow the indicated link and perform the steps and check if it helps fix the problem.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note: It is strongly recommended that you back up all your personal files. For more information about how to back up your files, please visit: http://windows.microsoft.com/en-US/windows7/Back-up-your-files

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  Let us know if it helps.

• Installed PSE12 of disk on Windows 7 (64 bit) but when I try to enter it asks me to sign the Publisher. Stuck in a loop!

  Installed PSE12 of disk on Windows 7 (64 bit) but when I try to enter in the editor it asks me to connect for the first time, I do it, so I need to go back where I came from just. Stuck in a loop!  Connection is correct.  If I click on Organizer it seems to work properly but I can't in the editor.

  12. does not elements

• Elite x 3: How do Hard Reset Elite x 3 - ring stuck in a loop

  Hello

  I just got my x 3 Elite and it is stuck in a loop, because I just get a blue screen and restarts it.

  I tried hardware reset using key combinations that I use on my other Windows Phone, but it doesn't seem to work on the elite.

  I also tried the Windows Phone recovery tool, but the elite is not yet listed on the devices.

  I looked on the uspport page to find out how to do the reset on the elite, but he mentions only get within the OS which I can't.

  Does anyone have an ideas/suggestions?

  Thank you

  Matt

  Hello

  I had exactly the same problem.  I powered my unit off (hold power butten for 10-15 sec) and kept it that way for more than 24 hours (Friday night to Sunday morning).   During this time, I did not get plugged.

  When I started this morning it starts normally (in my case it installed the preview of the release of windows mobile 10)

  Good luck

  Bryan

• Mail stuck in the loop. Cannot access same Mail preferences!

  Hello to you all. Can anyone help? I'm trying to set up Mail (in lieu of Thunderbird) I want to use the possibilities of synchronizing with Mail on my other Apple devices. The title says it all, and I have attached a screenshot of what I see. Impossible to do anything, except to force them to leave cannot even open Mail preferences! I'm on iMac with El Capitan Version 10.11.3 Mail Version 9.2 (3112). Henry

  

  Hi Aitchb65,

  Thank you for your participation in the communities of Support from Apple.

  I see that the mail is stuck in a loop and the opening of many windows unexpectedly. Try to run Mail in 'safe mode' by following these steps:

  Open Mail and immediately hold down the SHIFT key until the Mail is opened. This causes the Mail to open without any message or box to the selected letters.

  Of Mail if closes unexpectedly when displaying certain messages.

  If the Mail normally opens, try to update your SMTP settings -Mail (El Capitan): list of outgoing mail server settings.

  You can also delete email accounts in Mail preferences and start over after export and save all important messages. To help in this part, see Mail (El Capitan): Configure Mail with your email accounts and Mail (El Capitan): import / export the mailboxes.

  Sincerely.

• Satellite A50 stuck in boot loop after restore

  Hi, I tried to reformatt and restore my old A50, followed the instructions on the recovery disk only when it restarted it gets stuck in a loop, loading windows XP and then restart. When I start it in safe mode it says Setup failed to install and did the same thing.

  I started with a windows XP installation disc as well and it does nothing.

  Help, please!

  Thank you very much

  Leo

  Wait a moment Leo.

  If I understand correctly you original installation of recovery (recovery DVD) results issue described image.
  Installation of operating system with original installation disk Microsoft WXP ends with the same result.

  Can you confirm this?