Then the loop or VI runs more slowly, and then demanded

Similar Questions

• Unable to determine the type of AC power adapter. Your system will run more slowly and the battery won't charge.

  I get the error message is: AC power adapter type cannot be determined. Your system will run more slowly and the battery won't charge.

  Hello
  (1) when you receive this error message?
  (2) what is the brand and model of your computer?
  (3) did you change on your computer before this problem?
  It seems that the adapter has gone wrong, I suggest you to connect another card and see if the problem still occurs.
  You can also contact the computer manufacturer for assistance on this issue.

• After that the most recent windows update, my computer starts a little more slowly and the start bar at the bottom rises gray and rasterized.

  After that the most recent windows update, my computer starts a little more slowly and the start bar at the bottom rises gray and rasterized. In addition, all pages that I opened on the internet are coming with the same blocks of old, gray. Any ideas on what was past, and how to fix it?

  Original title: old start bar

  Right-click on your desktop, go to customize and then make sure that any theme in the 'Aero' section is currently selected.

• Microsoft Fixit error "an error occurred during the download of one or more components and cannot run the Troubleshooter"

  Original title: cannot run FixIt.

  With the help of Vista Home Premium, sp2, 32-bit on Toshiba Satalite A135

  I tried for days to find a solution for the reason why I can't run software 'MR FIXIT' or "MICROSOFT FIXIT" auto diagnostic I downloaded several versions of the software and saved, but when I try to launch it I stopped.  The following message appears: "toubleshooting cannot continue b/c an error has occurred."  An error occurred during the download of one or more components and cannot run the troubleshooter. »
  These versions I've tried lately:
  microsoftfixit. Program.installuninstall.RNP.84258196752136210.7.1.Run
  microsoftfixit. Program.installuninstall.Run
  microsoftfixit. WinSecurity.fisc.8425861308153696.4.1.Run
  microsoftfixit. Wu.FISC.8425861308153696.4.2.run
  852581157233326805.5.1.run
  I don't know if the problem is related, but I was also impossible to install the download: security for microsoft .net 1.1 SP1 framework update... (kb2656353).  I tried to install this download since January of 2012.  The reason why I tried to use the auto diagnostic software should fix my problem of installation of the security update.  I remember somewhere along the way, getting the error message that some files were corrupt.  Your help would be greatly appreciated.

  Hello

  Are able to run fix it?

  You can also post your query in Microsoft solve this forum. Please visit the link below to find a community that will support what ask you:

  http://social.Microsoft.com/forums/is/fixitcenter/threads

• What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Original title: Windows 7 OEM System Builder

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Yes, you can reinstall Windows 7 OEM System Builder License on the new hard drive with the new processor.

  It will not be a problem in this case, since you don't "move" installation, you are doing a new installation. The less it will take is activation of the phone, as you change the hard drive:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How can I uninstall the programs of the

  Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How do I uninstall the programs of the broken laptop and not running before installing on a new? Sincere friendships Fabian

  Hello

  If you have access to the machine, turn off Adobe CC applications by the signature of the application.

  Please see connect and disconnect to activate Cloud Creative applications

  Kind regards

  Sheena

• Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and i

  Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and intermittent. Help?

  I checked the wifi and changed frequency (new modem, frequency change made no difference). The Board battery seems fine - all updates well. My computer is an iMac (2011), 3.1 GHz Intel Core i5, 8 GB 1333 MHz DDR3, with a new AMD Radeon graphics card. I recently installed a State strong 1 TB SATA drive and fitted with a LaCie Porsche 4 to USB for backup and a 4TB disk storage RAID LaCie drive.

  I'm frustrated, having to come in my computer since my living room every 12 minutes to continue to listen to Spotify on my stereo system.

  My guess is there a bug in the software of sleep in El Capitan, which disrupts his (I've tried different USB ports connect the Audioengine sender and same thing).

  Should I go back to Yosemite?

  Turiteaguy

  First of all, 10.11.3 OSX just came out. Try this.

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• Why run exe file run more slowly than vi format when we build application exe?

  Jin

  We build the file vi drifter but exe file to run slower than the file vi. I check several vi and get the same result, which is slow, why?

  Thank you.

  The executable runs on the same PC that you have developed it, or on another PC when it is running slowly?  (Thinking that if it's on another PC, it hangs on errors for things that cannot be installed on the 2nd PC.)

  Where is the current slowdown?  Is it possible to have errors that happen that you do not see (as in the communication of the database) and which is at the origin of things run slowly because of time-out errors occur?

  I recommend you build your VI with a code debugging in it.  As indicators to show which are the son of the error.  Maybe create a simple Subvi who will save a timestamp and a description to a file and that scatter around your code, then you can connect at run time.

• Windows 7 SP1 w/IE 11 freezes, slow performance with switching webpages, downloads, games run very slowly and when to play simple games (for example, CandyCrush Saga) it ignores the graphics and music.

  I have an older Toshiba Satellite laptop I found that, after buying new laptops, I return to my only older because of its speed of travel from site to site, download and never had any problems with games.  I was running Windows 7 Home Edition, IE 9.

  About a year ago, I decided to upgrade my Windows 7 Home Edition to Windows 7 Professional and updated my browser IE 11.  Laptop still has a large.

  Then about 6 months ago I started to receive messages when you enter a Web site that I need to install Flash Player to view the page.  I checked my modules and Shockwave or Flash Player have been activated and would download it again to display the Web site (which I had already visited several times without any problems).  This has happened on several different sites.  Then I started to receive messages that I needed to upgrade my IE8 browser to a newer version.  I checked HELP to make sure that I still installed IE11 and I did it, I started getting these messages more often then I went to the aid of Microsoft Office on what to do if your Web pages telling you to upgrade.  Basically, IE11 is reset or uninstall IE11.  Reset is not good so I tried the method of reinstallment.  I uninstalled IE11, went to the download page for Microsoft IE11 and proceeds to download IE11.

  I saw a message that I couldn't download IE11 because I need to Windows 7 SP1 or later or Windows server 2008.  Then, I went to Microsoft requirements for the installation of Service Pack 1 for Windows 7 and follow-up procedures one (i.e., uninstall Adobe Acrobet, disabling Microsoft Security Essentials and Windows Defender and firewall, etc.) and after the installation of SP1 for Windows 7, followed all procedures to know what to do after the installation of SP1.  Downloaded all the updates (which were more than 120) restarted and was satisfied with fluent how my laptop worked once more.

  After a week, I noticed my phone to talk more and more to load pages and would begin to get Windows Explorer "unresponsive".  It started with almost everything I opened and I tried to edit Web pages or click icon to redirect me to another window, I kept receiving "not responding".  Rose (Microsoft), what to do and monitoring tools to try to fix the problem.  Initially, the problem was to find for a few hours, then starting upwards.  After a few days, my laptop almost took 30-45 seconds to switch between the tabs or windows.  After a search through questions and answers in the Microsoft community and Microsoft Web pages, the bottom line was reinstall Windows 7 SP1.

  Yet once, uninstalled and reinstalled Windows 7 SP1 and again ran perfect for a few days.  I turned on computer laptop yesterday and noticed that it took a long time for the upcoming Windows logo and has a black screen for a few seconds before the logo appears.  Of course, out of nowhere, I went to IE clicked icon and took forever to get to Yahoo (which is my predefined Web page).  Each page, I'm going to again is freezing, "not responding" and very slow operation.

  It is so frustrating because I added not all programs at all.  I am running IE11, Microsoft Security Essentials, and that's all. Outside of Windows Defender, firewall, Explorer, Media player, etc..  Microsoft Security Essentials (I did a full scan) has detected no viruses whatsoever and I 264 GB 285 GB free on my C: drive.  Therefore, there is no problem with the free space.  I have deleted the old files, temp files, analyzed and defragmented my hard drive and am just lost as to what is the cause.  All my drives are underway and have no conflict with all devices.  If I go down my Windows Professional so I will not be able to download anything higher than IE9.  I love IE11 and am happy with Win 7 SP1 if only he would stay longer than 3 or 4 working days.

  Do you have any suggestions?

  Hello Karen,

  Please run a scan with the following programs to see if your computer is infected by a piece of malware or a Trojan horse:

  https://www.Malwarebytes.org/

  http://www.bleepingcomputer.com/download/adwcleaner/

  http://www.bleepingcomputer.com/download/junkware-removal-tool/

  Malwarebytes will be produced a journal, please can post here the link to it? Navigate to: C:\ProgramData\Malwarebytes\Malwarebytes Anti-Malware\Logs and upload the logs to Ondrrive, which was the date of when you did the scan.

  For OneDrive help

  http://Windows.Microsoft.com/en-GB/Windows/Outlook/sharing-with-onedrive

  Start your computer in safe mode and see if your computer is always freezing.

  http://Windows.Microsoft.com/en-GB/Windows/Start-computer-safe-mode

  Ways to improve the performance of your PC.

  http://Windows.Microsoft.com/en-GB/Windows/improve-computers-performance

  Thank you.

• Some programs run very slowly, and when I get the dump file on these I get the following errors

  Some programs are running very slow on Windows 7, 64-bit, 12 GB of RAM.

  I opened the Task Manager, right-click on the program and generated a dump file.

  The dump file contains the following:

  Debug version of Microsoft Windows (R) 6.3.9600.17237
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\SOMEUSER\AppData\Local\Temp\javaw (3). DMP]
  User Mini with full memory dump file: only application data is available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  Windows 7 Version 7601 (Service Pack 1) MP (6 procs) free x 64
  Product: WinNt, suite: SingleUserTS personal
  Computer name:
  The debugging session: Wed Sep 17 19:40:25.000 2014 (UTC - 07:00)
  System Uptime: 7 days 6:20:59.258
  Running time: 0 days 0:01:03.000
  ...................................................... WARNING: dnsapi overlaps dhcpcsvc6
  WARNING: dnsapi overlaps mdnsNSP
  . WARNING: winrnr overlaps NapiNSP
  .........
  .... WARNING: webio overlaps winhttp
  ......... WARNING: WindowsCodecs overlaps dwmapi
  . WARNING: apphelp overlaps dhcpcsvc
  ..........
  ERROR: The symbol file is not found.  Defaulted to export symbols ntdll.dll.

  Summary of the symbol load error *.
  Name of the module error
  ntdll the system cannot find the specified file

  You can solve most symbol related issues by turning the symbol loading diagnostics (! sym noisy) and repeating the command that caused the symbols to load.
  You should also check that your symbol search path (.sympath) is correct.
  ERROR: The symbol file is not found.  Defaulted to export symbols for wow64cpu.dll.
  wow64cpu! TurboDispatchJumpAddressEnd + 0x6c0:
  75162e09 c3 00000000' ret

  Could I get comments on what to do?

  I already run SFC, disc scanned with difficulty of order and downloaded a few quick fixes on this site without success.

  Thank you

  Veronica

  Hi Veronica,.

  Thanks for the reply.  Refer to the following link suggestions.

  To optimize Windows for better performance

  http://Windows.Microsoft.com/en-CA/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  If you have another user account, please identify it and check the functionality. If you don't have a different user account, we will create a new user account.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Try these steps and let us know the results.

• File size shows 422 MB. I reduced the photos and rebooted and it shows still 422 MB. Program runs very slowly and stops while I'm editing.

  Muse works very slowly and stops while I'm editing. The file size is 422 MB. I have resized the pictures on the site, and reloaded. It shows still 422MB. My return carbonite says until there are 5 versions. I can't find many versions on my computer.

  A 187 MB file is large but are not rare. The .muse file size is entirely dependent on the size and complexity of your site.

  Where is stored the .muse file? It's on an internal drive, external hard drive, network drive, other?

  Please send the file 'MuseLog.txt' to the 'Documents' folder to my attention at [email protected] along with a link to this topic of forum for the context. The log should contain additional information about the 1034 (and any other error) you met. Thank you.

  If your site will develop continuously, it is good for the design and approach it like a series of "micro sites" - each published/uploaded to a folder on your domain. In this way individual "micro-sites" can be kept smaller and so will perform better in the Muse. For the visitor to the site, it looks like a Web site.

• Computer runs more slowly than before.

  I have a desktop computer. I was looking around and found the "reliability monitor and performance." I ran the test and here are the results:

  Diagnostic warnings!

  SYMPTOM: The Security Center has not declared - virus application... it is not anti virus product or it is not recognized

  CAUSE: Security Center cannot identify an antivirus application

  Solution: 1. check that the anti-virus is installed

  2. If installed, configure Security Center to stop monitoring anti virus status.

  I have not yet tried this solution

  Now, I have little idea of what I'm doing. I thought I read here that the 'Defender' is not available for Vista, that "Essentials" disabled or something like that.

  I know it's on my computer, but when I try to open and turn it on I get an error message. (error "0x800106ba") Usually hidden until I try to close all windows.

  Windows Defender is part of the Vista operating system.

  If you have Microsoft Security Essentials, AVG, McAfee, Norton, etc. installed, they have a conflict with Windows Defender, or turn it off.

  Microsoft Security Essentials has its own integrated version of the defender and should automatically disable the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the above explains the common compatibility issues with Windows Defender and other security programs.

  See you soon.

  Mick Murphy - Microsoft partner

• The fan runs all the time because xinetd running more than 80% all the time.  Someone else has the same problem?

  xinetd is running at 83% or more 24 x 7 devours battery in 2 hours or less and making the fan run all the time.  I am connected to a bug report, and it turns out that it was a duplicate because someone else had the same problem.  However, I have no access to the other bug report or find anything either in the discussion forums or online.  Anyone experience this problem?

  Hello gorgonzola1111,

  I doubt that someone else has this problem because xinetd does not part of macOS. Have you installed it from a package of "ports" 3rd party?

• the RealPlayer download button disappeared since I went to ff 10, how do I get it, also my computer works more slowly and there are many accidents, and it freezes, which he has never done before?

  I'm unable to download videos and the RealPlayer download button is gone and no corrections that I used before work, none of the add ons going to work and it's very frustrating. I also have the latest version of RP

  I suggest that you try as King that one question at a time, and instead of saying that you are using the latest version of a particular software specify exactly which version you are using.

  As a general rule, do some tests in firefox questions to troubleshoot Firefox in Safe Mode and then only add the minimal extensions or modules. you need for the test.