Out of the sqlplus invites if file not found

Similar Questions

• the driver installation error file not found

  I have a mp3 player that works very well on my wifes XP system but when I try and use it with Vista I get error installation driver... file not found. I tried all 3 usb ports... no luck.  I uninstalled the device... nothing.  Then I tried to plug in a USB stick... of the United Nations recognizes the device. I tried on everthing that I found online.  I would like to reinstall Vista but I have it on CD, I don't have the product code.

  Rick

  Are you sure you have the correct drivers for Vista and that the device is compatible with Vista?  Just because it works on XP there's no guarantee that it will work on Vista (especially if you use XP drivers).  What is the manufacturer, the brand and the model of mp3 player?  What version of Vista are you using?

  Please answer these questions in your answer.  Also check with the manufacturer for drivers updated firmware and/or software compatible with your device and your version of Vista and try to install them and see if that makes a difference.

  Thank you.  I look forward to your answer with responses and progress that you make with the drivers.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What should I do when after Lightrom 6 worked OK and I was rocking it draws to develop, all of a sudden I have started getting the message "folder or file not found?

  I downloaded photos successfully in Lightroom 6 and were able to develop and even export but suddenly in the process of development or export, Lightroom gives the message "File not found" and "file cannot be found. These pictures are already in Lightroom, how can't he not know where they are? And is it a problem with Lightroom, my computer, or what I did? And what should I do to correct this?

  Photos are never stored in Lightroom. They are stored on your hard drive somewhere, instead you put them, or to the place where you education Lightroom to put them.

  Lightroom is a database. When you import a pohtos, a record is created in the database for each photo, which contains the file name and the location of each photo. When the photo is no longer in the location Lightroom is looking (because somehow the file or folder has been moved, renamed or deleted outside of Lightroom), Lightroom indicates that it does not find the photo (or the photo is missing).

  Therefore, find the photo using your operating system. Once you have found the photo, you must tell Lightroom where the photo is, and what's his name. The exact tools used in this step are described here indetail: Adobe Lightroom - find folders and files moved or missing

• Ps12 downloaded on windows 8 in may! and can't make it work, invites loading 'File not found or expired Bitmap', he's going to load, but there is no present Editor?

  Have despaired wrapped around the myriad of so-called help/support sites without success.  I don't think that all of the loaded program and tried to solve problems, but getting the U44MIP2003 error code.

  Thank you.  Update did not work with turned off anitvirus.

  Have found records in the registry but don't know how to change the value by aligning the correct adobe file?  Need a little more information.  Can help you with this?

• Connection to the base tells me file not found...?

  I just installed Dreamweaver CS3 and I'm moving from classic ASP to ASP.NET. I have an Access database that I work with and I am able to set up a connection to the database successfully. The test button shows successful and I can also create a recordset through DW links Panel. I create a SQL, I have test and I see the data correct, returned in the test on the display window. Everything looks great.
  
  Then I simply remove the Recordset values in a table on the page and press F12 to preview in the browser. I get the following error:
  
  ------
  Description: An error occurred during the parsing of a resource required to service this request. Check the specific error details of analysis following and modify your source file for appropriately.
  
  Parser error message: could not load file or assembly 'DreamweaverCtrls, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = 836f606ede05d46a' or one of its dependencies. The system cannot find the specified file.
  
  Source error:
  
  
  Line 1: < % @ Page Language = "VB" ContentType = "text/html" ResponseEncoding = "utf-8" % >
  Line 2: < % @ Register TagPrefix = "MM" Namespace = "DreamweaverCtrls" Assembly = "DreamweaverCtrls, version = 1.0.0.0, publicKeyToken = 836f606ede05d46a, culture = neutra l" % > "
  Line 3: MM:DataSet
  Line 4: id = "rsPlayers".
  ----------------
  
  Any information on what is happening here and how I can solve this problem would be greatly appreciated. Not having is not a very good start to my transition to .NET. :(
  
  Thank you!
  
  

  Nevermind, I figured it. Had to deploy support files. Sorry for the post.

• Try to install the downloaded drivers when comes up with the error "file not found".

  Downloaded the drivers Vista for the HP Photosmart premium C410b and installation of hen comes up with the following error message: file not found

  C:/program files/hp C1164EDO-EF08-4B0B-8085-3BDSEAAEFD8D} \gup\at. Any ideas?

  Hi daddums1958,

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-84595-1&CC=US&DLC=en&LC=en&os=2093&Product=4186830&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-84595-1&CC=US&DLC=en&LC=en&os=2093&Product=4186830&sw_lang=

  10. run the download to reinstall the printer

• txt file not found

  Hi all

  Instead of data and using a database in my application, I use the txt files, when the application starts for the first time on a customers phone the console States "txt file not found", but the second time the client access the application then the txt files are found are read txt files. If anyone has experienced this problem or maybe similar problems, please help me.

  Thank you

  Hey all

  My app was crashing in my thread user interface and you there for the app is not read / create the txt files the first time the app

• VM won't turn on. Error message "file not found".

  Guys,

  One of my VM to ESX 3.5 that worked very well, does not start after a power failure. When I walk to the Victoria Cross, a "File not found" error message appears in 95% and process fails. I have attached, attached log file. What could be the resolution?

  SSebastian

  It seems that the ROW you added as "scsi 0:1" is no longer available. Check the ESX host storage tab and check whether the logic unit number is always available.

  Duncan

  VMware communities user moderator | VCP | VCDX

  -

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• The dreaded error "file not found vmdx.

  I did the supreme error of trying to work on my computer when I am ill and not thinking clearly.  No need to chastize me - I am already beaten pretty badly.  Here's what I did:

  I have a Virtual Machine for Windows XP Pro SP3 (32 bit).  The HARD drive has been set to only 40 GB.  I need to increase it (and have the space), so I turned off the virtual machine and tried to change the size of the HARD drive.  I was invited I can't make changes on the computer virtual HARD disk if there are no snapshots then (cringe) I removed all the.   VMWare has done its thing and removed all snapshots (takes TOO long).  I changed HARD drive of 40 to 80 GB virtual computer and clicked on apply.  I started the virtual machine and the HARD drive was still at 40 GB. I tried to turn off the virtual machine and the closure of VMWare, but when I restarted the VM showed a 40 GB HARD drive (even if the parameters he showed to 80).

  So I thought that maybe I need to turn off the Mac in case there is some kind of conflict of HARD drive.  So I turned off the iMac completely, let rest, then restarted everything.  When I walked into the virtual machine and tried to open a window of the Explorer, the virtual machine could not read the HARD drive (there was this animated icon 'search').  I could read the files in different folders, but Explorer couldn't read the HARD drive.

  So I powered down and pulled up the parameters VM & gt; Hard drives and I saw that the "Split into 2 GB files" has been verified "."  I did a superficial check in the help files (with my brain foggy-sick) and thought that it was not the right setting, so I disabled it and clicked 'apply '.  "VMWare has started doing his thing (took a very long time) and ends with an error"file not found"

  Now, when I try to start the virtual machine, I get the dreaded message: "file not found: Windows XP Professional.vmdk.»  This file is required to power on this virtual machine.  If this file has been moved, please provide its new location.

  I checked the spotlight.  I checked the Time Machine.  There is no file of this type.  Y at - it a hope?

  In the worst case (assuming that no hope), is it possible for the data files of the wreck of the virtual machine?

  iMac OSX 10.5.8 running

  Core 2 Duo 2.8 GHz

  4 GB of Ram

  HARD DRIVE 300 GB

  Need to see a file that lists the target Virtual Machine package, and you can use the instructions below to get it in the preferred form.

  1. in a Terminal (/ Applications/Utilities/Terminal), type the following without the quotes, including the trailing space, however do not press ENTER again and note that the following contains lowercase L, not those: 'ls - lAF.

  2. in the Virtual Machine in Fusion library (VMware Fusion (menu bar) > window > library Virtual Machine), ctrl + click on the virtual computer target, then select 'show in Finder '.

  3. drag and drop the computer virtual target on the Terminal and this will fill the full qualified path of the virtual machine.

  4 type the following without quotes, including the leading space, then press ENTER: "' > ~ / Desktop/filelist.txt '"

  Example of command line full in a Terminal:

  ls -lAF /Users/${USER}/Documents/Virtual Machines.localized/Windows XP.vmwarevm  > ~/Desktop/filelist.txt
  

  5. then attach the filelist.txt file that was created on the desktop to a response message.

  ==========

  Also the vmware.log file, (usually 4 of them), from within the virtual computer target package and if you need help to throw an eye to gather Information for VMware Fusion

• File not found error in the Welcome screen

  Help please!

  I have the exact problem described below, but do not have a folder with the same name as the volume created on the volume. Please can anyone help - I have tried everything. This problem happened when I upgraded to Fireworks CC!
  

  "At the launch of Dreamweaver on your Macintosh if your home screen does not load and you see an error"File not found", please check if you have a folder with the same name as your volume created on the volume. For more information about this event through the pdf document attached. Other dreamweaver dialog/panels that will be empty because of this problem are Jquery color chart, Adobe Edge Webfonts tab in the dialog manage fonts, dialog error W3c information, dialogue externalize Javascript and svn revert dialog. After having made changes indicated in the attached document, please check all the dialogues/panels affected to confirm that everything is working as expected. »

  Thank you

  This problem has been resolved by renaming current Martin of the Volume of work. The reason to get the "file not found" error in the case of Martin is because there is a folder inside the current workload that has the same name as the Volume itself (the name of the "system" folder. Please refer to the screenshot above).

  @cabolivar, can you please check if you have any folder in your root folder which has the same name as the name of current workload? If it's confusing, please post a screenshot as Martin. Try out us and solve it for you.

  Thank you

  DBC

• Unable to play the purchased songs iTunes - original file not found error?

  Unable to play the purchased songs iTunes - original file not found error?

  It just happened spontaneously in isolation or is there more background about what you did?

• go to a web page, firefox will pass it to a "file not found" but arrow to the left shows the page then goes back to 'file not found' again.

  for example. Google 'bc spca', choose www.spca.bc.ca and go. Firefox gives me this...

  File not found
  Sorry, the page you requested was not found. Please try again.

  Original URI: /assets/tab_advocate_mo.jpg

  But if I hit the arrow to the left, it shows me the page I searched for a fraction of a second, then goes back to the file not found again. This does not happen with Chrome or Internet Explorer. They go to the appropriate page.

  I am running windows 8.1 and uninstalled and reinstalled Firefox. NO GO. Help, please.

  Generally if an image on a page can not be found, Firefox does not redirect the entire page with an error message. the area of the image is just left in white. If this is not normal.

  On the error page, what do you see in the address bar, if anything?

  To check if one of your extensions could be the culprit, could test some pages from Firefox Safe Mode problem? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  Not all add-ons are disabled: Flash and other plugins still works

  After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).

  Any difference?

• I can't access some websites using Firefox. For my own site, I get "file not found". My Yahoo downloads in the form of text. No problems with browsers IE or Chrome

  I can't access some websites using Firefox. Pages say "File not found" or in the case of Yahoo and Facebook, they resemble the on-screen text files. No problems with my computer and it is not the case with my browsers IE and Chrome. Already deleted and reinstalled Firefox and it has not solved the problem

  You can also do a check of malware with some digitization programs of malicious software on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender: Home Page:
    http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked