Problems of subsequent update on Portege M400 and W7

Similar Questions

• Portege M400 and Vista - load PSD ends with crash

  I am an owner of a Portege M400 (PPM40E) and recently upgraded my Vista operating system. All new drivers work very well except for the * TPM *. Here's what's happening.

  There's nothing wrong with the installation of security platform. I can create a disc to ensure personal (PSD), load and unload until the first time I got disabling my computer.
  After each attempt to load the PSD is answered by an accident. Two seconds after the sending of password, I get a blue screen that informs me the source of the problem: * PFN_LIST_CORRUPT *, a memory dump file is created and the system restarts.

  Anyone facing this problem? Does anyone know how to restore data from a backup manually the PSD created? The Restore dialog box does not accept the * .fsb file.

  It would be great if someone could help me with this as I have not 'clear' backup files that I had stored on the DSP.

  Thanks in advance,

  Rob

  Hello

  I googled a little and found details of error PFN_LIST_CORRUPT.
  NFP: Page frame number and describes the sharing of individual images of main memory where the driver running or orders of this application.
  If an application or driver is beyond this scope, then a BSOD will appear.

  Here are a few tips and proposals to solve this problem I found on an external Web page:
  -updated the BIOS and set the default settings
  -reinstall and update the display driver, audio driver, LAN driver, etc.
  -Reinstall the security help,
  -update the Windows operating system

  In the worst cases, this problem could be caused by a malfunction of the RAM, and in this case, the RAM modules should be replaced.

  Sorry, but I didn't find more info on this issue.

• White screen to update the Portege M400 firmware after waking from sleep state

  Why this topic has been closed? http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19803&MessageID=74193

  I just wanted to add that this update does NOT resolve the problem in vista and it is NOT a driver problem. The update will not install in vista and vista is already provided with videoprt.sys 5.1.2600.2911.

  When it occurs, the laptop again indeed. You can manipulate and even hear the sounds, but the backlight does not come on or there is no output from the video card. I'm fairly certain that it is a signal of hardware problem.

  No matter what laptop I, euro or us, could someone please tell me the file so that I can look at what changes actually code?

  Hello

  > Why this thread has been closed?
  I think that the admin closed this thread because, as indicated by the user lumix2day the MS update has solved this problem.

  The M400 was delivered with Win XP it's why the update should work with Windows XP!

  Regarding your question.
  Looks like you are using your own copy of Vista on the M400.
  You should check if Vista is already up to date. Each week the new MS updates are published.

  Additinally, I recommend updating the BIOS and check for a driver update more recent display!

  Best regards

• Portege M400 and 3.60 BIOS

  Ubuntu Linux running on the M400 and it seems that almost all BIOS version 3.60 prerequisite are broken because there are errors of the quirk on the CPU APIC. Perhaps Microsoft could circumvent the APIC tables broken for awhile but things with Linux is a bit bulky. Microsoft asked to Toshiba for a BIOS update to address these issues and it seems to be fixed from 3.50.

  See here

  Even under Linux not more APIC errors appear. :-) But after the update from 3.60 BIOS splash screen remains active and keeps me to select an option for a boot (grub) multi entry. If the OS is already from the start screen become white first, then gives finally control the operating system. Others see this as well?

  I am able to select something in my Start menu, but it is more guess the start screen is always at the top. Very annoying it :-(

  Another issue I have is that sometimes the system freezes for a few seconds and then continues, nothing to see in the logs when you use a Tablet Ubuntu or Windows XP Home edition. So might be a bug in the BIOS once more. Yet once you are looking for confirmation, other know about this as well.

  Reflash 3.60 a couple of times, but seeing this behavior over and over again.

  Although it seems to be some control fan in 3.60. He does not like a DC9 aircraft, but were still not silent like the 1.80W or the 2.10N of BIOS versions. Nice to see these fan noise changes incorporated in 3.60 and later

  Hi Robert

  I know you hate me, but the fact is that Portege M400 has sticker next to the keyboard and it says something like designed for Microsoft. With short words: Linux OS is not supported.

  If you need help with Linux on Toshiba laptops please check http://newsletter.toshiba-tro.de/main/index.html

  Question about freezing is very strange and if you want to check properly install recovery without additional software image. In this case you will have factory settings and clean the preinstalled operating system. If you notice some outstanding questions, you must contact authorized service partner and clarify this point.

  Good luck!

• Problem installing ffter updates KB2657424 - KB2656351 - Kb2656352 and KB2656353

  After installing updates KB2657424 - KB2656351 - Kb2656352 and KB2656353 my computer takes forever to start and stop at the helm of the filler tasks. After using my PC System Restore returns to normal. George

  Hello

  Windows Update is a free way to help keep your PC safe and running smoothly. Windows Update do not affect the performance of the computer, this problem can be caused by a third-party application or corruption in the .net Framework as all updates are associated with .net Framework.

  Method 1:

  Try to install the updates in the clean boot state and check if that helps.

  I recommend you perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  Try to repair the existing installation of .NET framework.

  How to repair an installation existing.NET Framework

  http://support.Microsoft.com/kb/306160

• Problems with windows update, run sfc/scannow and boot into safe mode. (Vista Home Premium)

  Hi all

  Please bear with me here that I try to explain all the questions I have with my computer right now. I'll try to explain everything that self-organization as possible, but if you need more information or file papers to provide a solution more precise, do it me know.

  To start, I use a HP Pavilion dv6000 series (dv6748us to be exact) with Windows Vista Home Premium (32 bit) installed. (Service pack 2). About 6 months ago I got this laptop from what I believe was the conflicker virus (kept forwarding pages, arrested updates and antivirus programs, etc.) and I managed to get Windows Update works again. My help and Support did not work well, it only worked in Mode without failure, so I did some research and tried a bunch of suggested corrections (update the registry, etc.) and got it work yet once again. I don't know if one of the tools that I used all by setting the Help & Support could have caused problems that I now (as I literally tried everything under the Sun until I got to work), but my Windows Update does not work properly again.

  A few weeks ago, I installed some updates and restarted the computer, but updates did not finish install on reboot. He said the usual "Configuring Updates, do not turn off your computer", but never showed percentage complete or whatever it is. It restarted, and when I open Windows Update, he said the last time I checked the updates has never been (obviously not true), and when I tried to check the updates, it jumped right to the message telling me I have to restart my computer to complete the installation of updates. She continues to do everytime I open Windows Update. From time to time, I try to restart it, just to see if it will work, and he never does.

  I spent hours trying all the solutions I could find in Google. I tried to run system update readiness tool, which seemed to run correctly (but does not solve the problem). I then tried the difficulty it for Windows Update, and it does not solve the problem. (It might be important for me to mention that I also have problems with the difficulty It Center itself, too. Individual tools like that for Windows Update is running, but the difficulty It Center program keeps giving me the error message that "a problem is preventing the troubleshooting tool to start.") I also tried to rename the pending.xml file, and then later I deleted it, after reading in another forum that you rename the file could cause system instabillity or something like that.

  Unfortunately, I can't use system restore to solve all my problems, because all my previous restore points have disappeared (I don't know if the virus wiped out them, or if the computer removed on its own) but restore points only I checked are those that have been created recently, during the time I had these problems.

  I tried running sfc/scannow nothing helped, as he continues to tell me that there is a pending repair, but repair pending never ends. I tried to use the command of /revertpendingactions of dism.exe/image:C\/cleanup-image in the command prompt of recovery center to stop it pending repairs, and that has not worked because it claims that dism.exe that does not exist / is not a valid command. No matter what I try, I can't have this pending repair or my updates to complete pending.

  I tried to boot mode safe several times as well and he hung up on crcdisk.sys when starting every time.

  Being that I can't use sfc/scannow, System Restore, or get into Safe Mode, I'm really lost as to what I should do next. I'm honestly not sure if the problems are related, but I just thought it would make sense to list them all in one place.

  Please note that I don't want to re - install Windows Vista, or don't I think I need, because the computer works very well for most. (I use it for typing this right now). I had much rather bring all the features on mine, which I believe can be achieved with the help of the right person.

  If someone could provide me with suggestions/solutions, it would be greatly appreciated! Certainly, it would relieve a lot of stress for me!

  DISM is a thing of Windows 7. First test the hardware.

  Standard hardware troubleshooting
   
   
  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   

  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

   

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  sfc/scannow

   

  Heat

  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.

   

  For memory diagnostic results

  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   

  Double-click the entry for more details on this entry.

  For results of Chkdsk

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 50 , and the Source is disk
  Look for EventID is 51 and Source disk
  
  Look for EventID is 52 and Source disk
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  Look for EventID is 134 and Source is NTFS
  Look for EventID is 137 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
  Look for EventID 26213 and Source is Chkdsk
  Look for EventID 26214 and Source is Chkdsk
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

• Portege M400 and the Toshiba with a value add

  Hello..

  I want to installed the driver toshiba of a value package Add (tool electric meter, etc.) in my Win7.
  But if I try to install the installation routine said, I have a Toshiba laptop or my Bios is low for this.
  I have the Version 3.80 Bios and I can't find any more recent Bios for the M400 version

  any ideas on the error message?

  concerning

  I can imagine that your old presage m400 is not taken in charge of Win7.
  Where you downloaded VAP for your laptop model when M400 is not on the list of drivers Win7?

• RE blackBerry Smartphones: Blackberry Curve 8520 - problems with the update of the ID and unable to use AppWorld

  Hi, I have a 8520 and managed to install protect and created a blackberry for that id and everything has worked well.

  When I go to App World, I get a screen notifying my ID must be updated and I click on install and I get an error contacting the server Blackberry ID.  Appworld then closes.

  The result is that I can't navigate Appworld and download apps etc.

  Please help, I looked at some forums that offer to remove the ID software, but I can't find.  PPL have mentioned, it is a bug, and I notice that a lot of these issues on various forums.

  HUMZAZN,

  Check out this thread:

  http://supportforums.BlackBerry.com/T5/BlackBerry-App-World-General/error-80003-cannot-access-BB-ID-...

  Maybe this will help...

• Portege M400 and Autocad2007

  I can not change the color or thickness of a layer using the dialog box. You can select a new color/line thickness, but the change is not executed. It works on my desktop computer. I think that it is a video driver issue. Does anyone have a solution?

  Hello

  Well, it seems that there is a newer version of the AutoCAD application.
  Maybe it s just a matter of adjustment. I m not an AutoCad expertise but check the Toshiba page driver and compare versions of display driver.

  I also recommend to ask for support for the production of AutoCad.

  PS. Also on this page:
  http://www.jtbworld.com/autocad2007.htm

• Portege M400: Windows Update problem

  Hi, I have a Portege M400 and I have windows XP is installed. Whenever I try to download and install new updates to Windows, I get an error saying that none of the updates have been installed. I have tried to re - download and reinstall updates once or twice, but I get the same message. Someone knows how to fix this?

  I refer to www.microsoft.com support sites because this isn't a problem with your machine, it s more a windows problem.

  I guess when to check microsoft support sites, you should quickly find a solution to your problem.

  Welcome them

• Access keys stopped working after update Win XP on Portege M200 and M400

  After having invited to do, I recently upgraded to Windows XP two my Portege m400 and m200 notebooks.
  Since then, I've noticed as hotkeys that i.e. Fn + F1 - F12 has stopped working.
  Outside the windows updates, I only use and change a lot on the m200 so I am sure this has to do with the Xp updates.

  Can someone help me restore the m200 and m400 hotkeys?

  Hello

  Try reinstalling the common module for Win XP edition filed.

  The common module for Poretege you can find on the European driver Toshiba page:
  Laptop-> Portege-> Portege M Series-> Portege M400

  The common module for Portege lies in
  * ARCHIVE *-> Portege-> Portege M series-> Portege M200

  Welcome them

• Portege M400 - CPU cooling problem

  Last year, when I had used my Portege M400 for 2 years, he started the deadlock occasionally. Sometimes [I couldn't even start it | http://www.youtube.com/watch?v=RjNa8-c2Aro]. With cut and try the method I found the problem. The Spring wire which clasps the CPU radiator, it was with not enough force:
  http://Zorko.ru/assets/files/531/531/170720102581.jpg
  http://Zorko.ru/assets/files/534/534/170720102589.jpg

  The problem was solvable by Berry to the claws spring begins to apply more force hugging the radiator of CPU:
  http://Zorko.ru/assets/files/535/535/170720102591.jpg

  Apply a new layer of thermal grease has been useful as well:
  http://Zorko.ru/assets/files/533/533/170720102585.jpg

  However, the solution works for only a few weeks. And then (especially if it's hot outside) the story begins again.

  Any suggestions how to solve the problem once and for all? Thank you.

  Hi Greendrake,

  It s really great that you are interested in your Portege M400 and you can remove it. It of really not easy and so this cannot be the people with a lot of experience.

  Anyway, as you know here our forum user s only. This means that you can speak with normal people like you and me. I would recommend therefore to contact a service provider authorized in your country. Maybe the guys know this problem or something else or you need a thermal grease special because not all compatible thermal greases all cooling.

  By the way: on the Toshiba site you can find a list of all service providers.

  I hope it helps. :)

• Portege M400 + WiMAX Intel 5350

  Bought a card pushed!
  WiFi is accessible
  WiMAX is not even in the dispatcher of problems!

  What is a problem?

  Hello

  To be honest I m not very well what problem you have.
  I see that you have bought Intel 5350 WiMAX card and updated the Portege M400

  I found info on the page than the Intel WiMAX/WiFi Link 5350 Intel and Intel WiMAX/WiFi Link 5150 are family of network adapters wireless IEEE 802.16e and 802.11a/b/g/Draft-N1 which operates in the range of 2.5 GHz for ghosts of WiMAX and 2.4 GHz and 5.0 GHz for WiFi.

  To be honest I m uncertain quote if this card is compatible with this laptop.
  To my knowledge there is no Draft N support.

  But here is some info on this product I found on the page of Intel:
  http://support.Intel.com/support/wireless/WMAX/5350_5150/sb/CS-029556.htm

  http://www.Intel.com/network/connectivity/products/wireless/WiMAX/WiFi/index.htm

• Portege M400 keeps freezing

  I recently bought a Portege M400 and it completely freezes and requires a hard reboot at least once per day - any ideas on how to solve this problem?

  Hello

  You use the image of the preinstalled Toshiba or you manually installed the OS?
  Do you use the 3rd party software?

  I don't know if it is useful, but sometimes a high temperature could be responsible for the laptop computer from freezing.
  In most cases the cooling modules may not work properly due to the circulation of air is bad.
  Please remember that you have enough space around the laptop and the fans are clean.

  In addition, you can check the standby power settings that allow you to change the processor, the speed of processing and cooling method.

  If this does not help so I recommend asking for extra help Toshiba service partner and diagnosis.
  I assumed that the Portege M400 is a new unit and of the guarantee must be valid.

• Set the rotation of the screen to external monitor on Portege M400

  I would like to be able to use the screen of the mobile phone in the form of tablets, while the display to an external monitor. The problem is that when you use the laptop in its Tablet configuration (fixed and swivel screen on top) the external monitor displays the image upside down. If I rotate the screen image output, so I use the Tablet upside which is impossible when it is docked. Is it all the same independently set the rotation of the screen of the Tablet and the external screen?
  If someone could help me with this I would be grateful as at this moment whether or not I have to remove the Tablet and use backwards the external monitor.

  I use Windows tablet PC on a Portege M400 and a monitor external 22 "LCD

  Thank you.

  Before we start the discussion I just have one question: do you want to use extended desktop or office cloned on external monitor?