OUTER JOIN query returns the results of JOIN IN-HOUSE 11.2.0.1.0

Similar Questions

• cfinclude query: return the result to the specific line

  I tried to crack this all day and I feel like if I just had a little nudge in the right direction I could succeed.
  
  I have a query that returns records of some textbooks that are at a specific school. I standardized the database manuals so that the categories of primary, secondary and tertiary subjects are represented by the primary key of this category in its own table. The application loops through the records, I want to go back to the topic (varchar) category that goes with this (digital) key in the table.
  
  Since Coldfusion will not allow nested cfoutput, I tried to use cfinclude to enter the specific name for the subject category that accompanies the current manual - but what I have until this returns all subjects for school in each row id - they are the subjects of law! but I'm not all, just the right with the good book/record one. Can anyone suggest what I need to do? I enclose the code for the home page and for one of the cfincludes (they are identical, except for the "primary", "secondary" and "tertiary").
  
  I know I should leave something but I can't understand that. Thank you very much in advance.
  
  

  Cow Holy, I managed to do work! Code attached... and thank you so much, everyone! * Phew *.

• Unable to display the entire contents of the CF query return the result on my Web see page

  Hello

  I'm trying to extract data from a table (project_reports), which is to have a column of type CLOB (details) inside data.

  Details this column takes a huge amount of data in it.

  And I use the code to retrieve and display the data on my CF Web page below.

  
  < cfquery name = "getReport" datasource = "myDS" >
  Select details in project_reports where project = 54516
  < / cfquery >

  < cfoutput query = "getReport" > #getReport.details # < / cfoutput >

  
  ColdFusion is able to process and display a quantity limited data, but not the full data.
  I want to retrieve and display all of the data using ColdFusion.
  Can someone help me on this? Thanks in advance.

  Kind regards
  Jacques.

  Mamidela wrote:

  ColdFusion is able to treat & display a quantity limited data, but not the full data.

  Check the data source settings in the CF administrator. Make sure that the CLOB parameter (enable Long Text Retrieval) is checked.  When this box is _not_ checked, CF retrieves only the 64000 bytes.

• query returns different results depends on the length of the day

  Hello!
  
  I have a query:
  
  

  INSERT /*+ APPEND */ INTO pwa_process (
  id,
  id_session,
  id_customer,
  s2k_account,
  service_seq_num,
  msisdn,
  id_tariff,
  contract_end_date,
  last_contract_date,
  next_available_contract_date,
  tariff_name,
  description,
  description_long,
  imei_old,
  activation_date,
  id_customer_number,
  arpu,
  value0,
  value1,
  value2,
  value3,
  value4,
  value5,
  id_pricing_plan)
  WITH msisdns AS (SELECT msisdn ms FROM customer_number cn
  JOIN customer_s2kaccount cs ON cn.s2k_account = cs.s2k_account AND cs.id_customer = v_customerId)
  SELECT
  seq_pwa_process.NEXTVAL,
  v_sessionId,
  customer_s2kaccount.id_customer,
  customer_s2kaccount.s2k_account,
  customer_number.service_seq_num,
  msisdn.msisdn,
  tariff.id,
  NVL(CASE WHEN date_contract_end IS NULL AND le_contract_end_date IS NOT NULL OR (date_contract_end < le_contract_end_date)
           THEN le_contract_end_date
           ELSE NVL(date_contract_end, ADD_MONTHS(customer_number.date_start, customer_number.ada_availability))
      END, TO_DATE('01.01.1970', 'DD.MM.YYYY')) contract_end_date,
  CASE WHEN NOT customer_number.date_first_activation IS NULL AND customer_number.date_first_activation >      (CASE WHEN ada_priority = 1 THEN ada_date_pwa
          WHEN ada_priority <> 1 AND (date_pwa IS NULL AND exchange_date IS NOT NULL OR date_pwa < exchange_date) 
          THEN exchange_date 
          ELSE date_pwa 
    END) 
       THEN customer_number.date_first_activation
       ELSE   (CASE WHEN ada_priority = 1 THEN ada_date_pwa
          WHEN ada_priority <> 1 AND (date_pwa IS NULL AND exchange_date IS NOT NULL OR date_pwa < exchange_date) 
          THEN exchange_date 
          ELSE date_pwa 
    END) 
  END last_contract_date,
  ADD_MONTHS(CASE WHEN NOT customer_number.date_first_activation IS NULL AND customer_number.date_first_activation > NVL(  (CASE WHEN ada_priority = 1 THEN ada_date_pwa
          WHEN ada_priority <> 1 AND (date_pwa IS NULL AND exchange_date IS NOT NULL OR date_pwa < exchange_date) 
          THEN exchange_date 
          ELSE date_pwa 
    END) ,
                                                                                                                         NVL(customer_number.date_first_activation, NVL(customer_number.date_start, customer_number.date_effective)))
                  THEN customer_number.date_first_activation
                  ELSE NVL(  (CASE WHEN ada_priority = 1 THEN ada_date_pwa
          WHEN ada_priority <> 1 AND (date_pwa IS NULL AND exchange_date IS NOT NULL OR date_pwa < exchange_date) 
          THEN exchange_date 
          ELSE date_pwa 
    END) , NVL(customer_number.date_first_activation, NVL(customer_number.date_start, customer_number.date_effective)))
             END, customer_number.ada_availability - DECODE(NVL(customer_number.current_contract_type, 0), 2, DECODE(customer_number.reduced_contract_used, 0, NVL(customer_number.el_contract_calculated_reduc,0), 0), 0)) next_available_contract_date,
  tariff.name_ada,
  DECODE(msisdn_group.def_column, 0, msisdn.value0, 1, msisdn.value1, 2, msisdn.value2, 3, msisdn.value3, 4, msisdn.value4, 5, msisdn.value5, msisdn.value0),
  msisdn.value0 || ';' || NVL(msisdn.value1, '') || ';' || NVL(msisdn.value2,'') || ';' || NVL(msisdn.value3,'') || ';' || NVL(msisdn.value4, '') || ';' || NVL(msisdn.value5, ''),
  customer_number.imei,
  NVL(customer_number.date_first_activation, NVL(customer_number.date_start, customer_number.date_effective)) date_start,
  customer_number.id,
  NVL(s2kaccount.arpu1,0),
  msisdn.value0,
  msisdn.value1,
  msisdn.value2,
  msisdn.value3,
  msisdn.value4,
  msisdn.value5,
  customer_number.id_pricing_plan
  FROM customer_s2kaccount
  JOIN customer_number ON customer_number.s2k_account = customer_s2kaccount.s2k_account AND customer_number.service_state = 'AB'
  JOIN msisdn ON msisdn.msisdn = customer_number.msisdn
  JOIN TABLE(CAST(v_tmp_table AS ADA.NUMBER_TABLE)) ids ON ids.column_value = msisdn.id
  JOIN msisdn_group ON msisdn_group.id = msisdn.id_msisdn_group
  JOIN pricing_plan ON pricing_plan.id = customer_number.id_pricing_plan AND pricing_plan.is_for_pwa = 1
  JOIN tariff ON tariff.name = pricing_plan.id
  JOIN s2kaccount ON s2kaccount.s2k_account = customer_number.s2k_account
  LEFT
  JOIN (SELECT msisdn, exchange_date, ADD_MONTHS(exchange_date, MAX(prolongation)) le_contract_end_date
  FROM loyalty_exchange a, msisdns
  WHERE a.msisdn = msisdns.ms AND exchange_date >= ALL (SELECT exchange_date FROM loyalty_exchange b WHERE b.msisdn = a.msisdn)
  GROUP BY msisdn, exchange_date) le ON le.msisdn = customer_number.msisdn
  WHERE customer_s2kaccount.id_customer = v_customerId;

  This query returns different results in the morning (09:00) and afternoon (16:00) on the same database for the same input data (I have prepared a script to test).
  Oracle 9.2.0.6 @solaris
  I checked the query plans, but they look the same in the morning and the afternoon. I don't know where to look for a problem/bug.
  Please help me with suggestions. is in bug with join ansi? or a left outer join?
  
  Published by: batonoff on February 16, 2009 16:56
  
  Published by: batonoff on February 16, 2009 16:58
  
  Published by: batonoff on February 16, 2009 17:00

  I recommend you post your declaration in the {} code tags (without the spaces) so that we can actually read.

  You are absolutely positive that nothing has changed on the data between when you run in the morning and in the afternoon?

• I need to return the result of a query on a stored procedure

  I need to return the result of a query to a stored procedure, I mean when I run a stored procedure it returns a result set in a select statement.
  Best regards...

  Hello.

  Do you really want a stored procedure for this?
  Why not just a script that contains the query?

  Assuming that you don't really want a stored procedure, you'll have to decide what to do with the results.
  An option is a slider.

  For example, you can write a procedure of this type to hold the query:

  CREATE OR REPLACE PROCEDURE USP_TEST
  (     out_cursor     OUT     SYS_REFCURSOR
  )
  IS
  BEGIN
       OPEN  out_cursor
       FOR     SELECT     *
            FROM     scott.emp;
  END  USP_TEST;
  /
  SHOW ERRORS
  

  You can move the cursor to another procedure for handling.

  You could test this in SQL * more by creating a variable blond:

  VARIABLE     usp_test_cursor     REFCURSOR;
  
  EXEC  usp_test (:usp_test_cursor);
  
  PRINT     :usp_test_cursor
  

• PLSQL function to return the result of the query

  Dear all,

  Oracle Database SE1 11.2.0.1

  I need to create a plsql function which should accept SQL as a parameter, execute it and return the result set.

  Is this possible?

  Madhu.149 wrote:

  I need to create a plsql function which should accept SQL as a parameter, execute it and return the result set.

  Be careful - results games indicate a set of data stored in memory. This is not what are sliders. This isn't how Oracle should be used.

  Imagine that you implement such a result set function - which, on average, requires 1 MB of memory (private server) to store the results of the SQL query. A 100 users mean a 100 MB of memory required server. This is not suitable. Not at all. Never.

  The correct back 'thing' is a handle to SQL cursor (called a ref cursor in this case). A SQL cursor is a "program" - that the appellant runs via the fetch command and generates one or more lines accordingly. Appellant repeatedly runs this slider through calls to fetch until this slider found and returns all rows affected (using consistent readings).

  If you want an abstraction interface that the client can call via PL/SQL code in the database, so this crafting optimal SQL interface, creates the SQL cursor and returns the handle of the cursor (via the ref cursor data type) to the client.

• the coil does not return the result of the query

  Hi people, I just my adventure begins with oracle sql basics course and I encountered the first problem.

  as I wrote in the topic, after you run the statement I get only query itself in the output file with no query results.

  exsample:

  coil C:\Users\Tomasz\Desktop\cw1.txt

  SELECT STARTDATE AS hire_date, employe_id, last_name, job_id

  Employees;

  spool off;

  all advice?

  Thanks in advance,

  Tomasz.

  Hi people, I just my adventure begins with oracle sql basics course and I encountered the first problem.

  as I wrote in the topic, after you run the statement I get only query itself in the output file with no query results.

  exsample:

  coil C:\Users\Tomasz\Desktop\cw1.txt

  SELECT STARTDATE AS hire_date, employe_id, last_name, job_id

  Employees;

  spool off;

  You said "after the execution of the statement.

  What you posted is NOT a statement; It is a script.

  I select Run Script (F5) and the file contains the query and the result set.

  If you use "Run the statement", you will get a file.

• Reading number of XML nodes in a document &amp; amp; return the result in the text member

  Hi all
  
  I wonder if you can help me with the following:
  
  I want to read the number of nodes in an XML document and return the result in a text cast member. That's what I do so far, but he refuses to work
  
  

  Yes, my mistake. That should have been:
  --
  tList =
  nNodes = count(tList[1])
  sText = «»
  Repeat with i = 2 to nNodes
  tText = tList [1] .getPropAt (i)
  sText = sText & tText & RETURN
  end repeat
  -Remove rear BACK tank
  remove the last tank of sText
  -Place ALL the text in a text member
  Member ("test1"). Text = sText
  -- ...

• Select from another table, when the query returns no result

  Hello
  
  I have a question where I'm supposed to retrieve the address of an account id-based billing. However, the table of billing may not have an address. There is a table of addresses that always has an address for an account. If the billing address exists, it should be used, so I can't use the address table. Is it possible in a select statement to query to the billing address and if it does not exist, use the address table.
  
  SELECT * FROM accounts a, b billings WHERE a.accountid = b.accountid
  
  Any help will be greatly appreciated.
  
  Thank you.

  user10407139 wrote:
  Hello

  I have a question where I'm supposed to retrieve the address of an account id-based billing. However, the table of billing may not have an address. There is a table of addresses that always has an address for an account. If the billing address exists, it should be used, so I can't use the address table. Is it possible in a select statement to query to the billing address and if it does not exist, use the address table.

  SELECT * FROM accounts a, b billings WHERE a.accountid = b.accountid

  Any help will be greatly appreciated.

  I think you need to explain more clearly if

  -you only have a couple of "billing" columns which is empty and in this case, you want to use the columns from the table 'accounts '.

  - or you have a join with another table that doesn't return data, for example a foreign key "address_id" "billing" is zero and therefore the join to other tables 'address' will return all the data

  In the first case, you have already been provided with some examples here, how to use NVL or similar functions to achieve, even if the first post first evaluates the information of 'accounts' and if it is white using information from "billing". According to your description you need the other way around. The second post a subquery recursive useless in my opinion.

  In the latter case, you should probably use an "outer" join so that the data in your table "bills" are returned, even if the join to another table is not at all the lines.

  SELECT
  NVL(AD1.ADDRESS_ATTR1, AD2.ADDRESS_ATTR1) as ADDRESS_ATTR1,
  NVL(AD1.ADDRESS_ATTR2, AD2.ADDRESS_ATTR2) as ADDRESS_ATTR2,
  NVL(AD1.ADDRESS_STREET, AD2.ADDRESS_STREET) as ADDRESS_STREET,
  ...
  FROM accounts a
  INNER JOIN billings b
  ON a.accountid = b.accountid
  LEFT OUTER JOIN address ad1
  ON b.address_id = ad1.address_id
  INNER JOIN address ad2
  ON a.address_id = ad2.address_id;
  

  In this way you pick up the address stored in the "invoices" table, if it existed, otherwise you pick up the address assigned to the "accounts" table I used an inner for the second address join join because you said that the account always has an assigned address.

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
  http://www.sqltools-plusplus.org:7676 /.
  http://sourceforge.NET/projects/SQLT-pp/

• Simple query with a subquery returns the result of 'bad '.

  DB version: 11.2
  
  We have created approximately 27 patterns in the last 4 days. The query below confirms that.
  

  SQL > select username, created from dba_users where created > sysdate-4;
  
  USERNAME                       CREATED
  ------------------------------ --------------------
  MANHSMPTOM_DEV_01              12 Jul 2012 11:55:16
  PRSM01_OAT_IAU                 13 Jul 2012 01:51:03
  F_SW                           11 Jul 2012 17:52:42
  FUN_CDD_HK_SIT                 09 Jul 2012 15:33:57
  CEMSCOMPTOM_UAT_01             12 Jul 2012 11:43:45
  STORM02_OAT_IAU                13 Jul 2012 02:06:29
  .
  .
  27 rows selected.  -------------> Truncated output

  DBA_TS_QUOTAS.max_bytes column, we can determine the quota of space allocated for a user/schema

  SQL > desc dba_ts_quotas
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   TABLESPACE_NAME                           NOT NULL VARCHAR2(30)
   USERNAME                                  NOT NULL VARCHAR2(30)
   BYTES                                              NUMBER
   MAX_BYTES                                          NUMBER
   BLOCKS                                             NUMBER
   MAX_BLOCKS                                         NUMBER
   DROPPED                                            VARCHAR2(3)

  So, I wanted to see the space allocated for users created in the last 4 days. The following query should return only 27 cases because the subquery returns only 27 records. Instead, he returned 66 entries!
  

  select username, tablespace_name, max_bytes/1024/1024 quotaInMB
  from dba_ts_quotas
  where username in (select username from dba_users where created > sysdate-4);

  No idea why? I know this isn't a bug with oracle. It's just that I didn't eat fish lately.

  Hello

  J.Kiechle wrote:
  So, I wanted to see the space allocated for users created in the last 4 days.

  DBA_TS_QUOTAS does not have the space, but rather the maximum allowed for a given user.

  J.Kiechle wrote:
  The following query should return only 27 cases because the subquery returns only 27 records. Instead, he returned 66 entries!

  What happens if your user John has Quotas on 3 tablespace TBS1 and TBS3 and TBS2?
  You can't expect the outer query to retrieve only the more than 27 just line because the inner query returns 27 rows.

  For the space allocated by the storage space for newly created users, you'd better ask dba_segments. something like:

  select owner, tablespace_name, trunc(sum(bytes)/1024/1024) alloc_mb
  from dba_segments
  where owner in (select username from dba_users where created > sysdate - 4)
  group by owner, tablespace_name
  order by owner, tablespace_name;
  

• Help with the query to return the results of the group in the table?

  Hello
  Im a total noob, so please be nice...!
  
  I'm looking around a table contains a column of WORD and a WORD_TYPE_ID column.
  Words can have the same type_id.
  
  What I'm trying to do is to write a query that will return the longest word for each word_type_id.
  I tried for hours to get it and everything seems to get is two error messages or just the longest word in the whole WORD column.
  
  Is the furthest I can get before things break down...
  
  Select Word
  table
  where
  Length (Word) =
  (
  Select
  Max (length (Word))
  table
  )
  
  Any help on this or if I could be pointed in the right direction it would be greatly appreciated.
  
  Thank you

  Hello

  Welcome to the forum!

  Here's one way:

  SELECT    word_type_id
  ,       MIN (word) KEEP (DENSE_RANK LAST ORDDER BY LENGTH (word))     AS longest_word
  FROM       table_x
  GROUP BY  word_type_id;
  

  If there be a tie in some word_type_id (i.e. 2 or more words have exactly the same length, which is the longest in this group) the expression above will return the first one alphabetically. (This is what means here MIN.)

  Published by: Frank Kulash, 11 August 2009 13:56

  You almost had it.
  As you have noticed, you get the longest line across the table. This is because your subquery was watching the entire table.
  If you to correlate the subquery to the row in the main table, as shown below, you can get the longest word in each group:

  select  word
  from     table     m                              -- m for main
  where      length (word) = (
                              select  max (length(word))
                 from     table
                 where     word_type_id  = m.word_type_id     -- New
                 );
  

• sys_refcursor do not fetch any data, even if the query returns the value

  I use sys_refcursor to return the columns and aid below the procedure to do. Although the data are there in table_1 and table_2.
  
  PROCEDURE test_pro (abc_date N, DATE,
  cur_get_data ON sys_refcursor
  )
  
  OPEN cur_get_data
  for
  Select A.col1, B.col2
  from table_1 A
  where A.dis_date = abc_date
  left outer join
  table_2 B
  on
  A.dis_date = B.dis_date;
  
  IF cur_get_data % rowcount = 0
  then
  raise e_error;
  END if;
  
  EXCEPTION
  When e_error
  then
  -no_data_found;
  while others
  then
  -(giving an error with the SQL error code);
  
  END test_pro;
  
  
  When running under sql in the sql pl/sql developer window pick
  data
  Select A.col1, B.col2
  from table_1 A
  where A.dis_date = abc_date
  left outer join
  table_2 B
  on
  A.dis_date = B.dis_date;
  
  But while testing the test_pro in the test of the pl/sql Developer window, it is
  do not fetch all data and raise e_error every time
  
  is there a problem arising from the use IF cur_get_data % rowcount = 0 whenever that happens in the exception block.
  
  so can someone please put a few ideas what cud be the reason for this?

  PROCEDURE test_pro(abc_date IN DATE,
                     cur_get_data OUT sys_refcursor
                    ) is
  BEGIN
  
    OPEN cur_get_data for select A.col1,B.col2
                            from table_1 A
                           where A.dis_date = abc_date
                                 left outer join
                                 table_2 B
                              on A.dis_date = B.dis_date;
  
  /* while testing let exceptions just pop out
  EXCEPTION
  
    when no_data_found
    then
  ------no_data_found;
    when others
    then
  --------(giving SQL error with error code);
  */
  END test_pro;
  

  then you test as something like

  declare
  
    my_date   date := to_date('20120621','yyyymmdd');
    my_cursor sys_refcursor;
    col1      ... ;
    col2      ... ;
  
  begin
  
    test_pro(my_date,my_cursor);
  
    loop
  
      fetch my_cursor into col1,col2;
      exit when my_cursor%notfound;
      dbms_output.put_line(col1 || ' ~ ' || col2);
  
    end loop;
  
  end;
  

  Concerning

  Etbin

• SQL query return different result 11 GR 1 material and GR 11, 2

  Problem: SQL returns different results in 11 GR 1 material and GR 11, 2 games.

  Example script:

  create the table tab_main
  (
  SOS number (2) not null,
  contract number (2) null
  )
  /

  create the table tab_sub
  (
  number (2) of contract non-null,.
  SOS number (2) null
  )
  /

  insert into tab_main values (1, 10);
  insert into tab_main values (2, 20);
  insert into tab_main values (3, null);
  insert into tab_main values (4, null);

  insert into tab_sub values (1, 10);
  insert into tab_sub (20, 2) values;
  commit;

  The SQL code:

  SELECT *.
  OF tab_main.
  tab_sub
  WHERE tab_main.sos = tab_sub.sos (+) AND
  tab_main. Contract = tab_sub.contract (+) and
  tab_main. Contract not in (select 1 of the double);

  The above query gives more results
  -by 11.2.0.4
  1 10 10 1
  2 20 20 2
  

  -in 11.1.0.7
  1 10 10 1
  2 20 20 2
  4
  3

  
  Please tell us what could be the reason for the behaviour of offset lines thie.

  
  Thank you

  Piesset
  
  

  I think it is probably a bug in 11.1.0.7 (and possibly other versions), I get the same results as your 11.2.0.4 9.2.0.7, 10.2.0.3 and 11.2.0.3, and this is the result, I expect.

  Your not in the paragraph is equivalent to:

  SELECT *.

  OF tab_main, tab_sub

  WHERE tab_main.sos = tab_sub.sos (+) AND

  tab_main. Contract = tab_sub.contract (+) and

  tab_main. Contract <> 1;

  Since you have null values in tab_main.contract they are lost by the predicate since null = value is never true (or false).

  John

• SQL Query - store the result for optimization?

  Good day experts,

  I'm looking for advice on a report. I did a lot of analytical functions to get the basic data that I have to do my report and its takes about 50 min for SQL finish. Now, with these data, I need to create 3 different reports and I can't use the SQL even since there are a lot of aggregation (example would be product group in one case and by customer in 2nd). For each of these different group garages I need another report.

  So how to create 3 reports of 1 SQL query without running the query 3 times?

  First thing that comes to mind is to store the result set in a fictitious table, and then query the table since I get the basic data are about 300 lines and then perform different garages group.

  Best regards

  Igor

  So how to create 3 reports of 1 SQL query without running the query 3 times?

  You already know the obvious answer - store data 'somewhere '.

  If any 'somewhere' depends on your needs and you have not provided ALL the.

  MV - if the query is always the same, you might use a MV and make a complete refresh when you want that new data. The data are permanent and can be queried by other sessions, but the query that accesses the data is frozen in the definition of MV.

  GTT (global temporary table) - If a NEW charge of data AND three reports will be ALWAYS executed by a single session and then data are no longer necessary so a TWG may work. The application that loads the TWG can be different for each race, but the data won't be available for a single session and ONLY for the duration of this session. So if something goes wrong and the session ends the data are missing.

  First thing that comes to mind is to store the result set in a fictitious table, and then query the table since I get the basic data are about 300 lines and then perform different garages group.

  Which is commonly called a "table of REPORT-READY." Those that are useful when data must be permanent and available for multiple sessions/users. Generally, there is a batch (for example the package procedure) that periodically refreshes / updates the data during a window of failure. Or the table can have a column (for example AS_OF) that allows it to contain multiple data sets and the update process let alone the existing data and creates a new set of data.

  If your database is about 300 lines you can consider a table report and even use it to contain multiple data sets. Then, the reports can be written to query the data by using a value AS_OF that wraps and returns the appropriate data. You don't need a window of failure since the oldest data are still available (but can be removed when you no longer need.

  If you need a set of data, you can use a partitioned table work (with only one partition) to collect the new set of data, then a SWAP PARTITION to 'swap' in the new data. Only, this "Exchange" takes a fraction of a second and avoids a window of failure. Once the swap done no matter what user query will get new data.

• Parameter query returns no results

  Hello
  
  I need a parameter query to return all customers for the locality.
  
  The name of the locality is given as a parameter.
  
  The problem with me is that the query is not even a single line when it should return at least fifty!. Locality is not unique, and there are a lot of consumers with the same value for the LOCALITY. The query I use is given below:
  
  SELECT ROWID, of GEOM FROM NOT_MY_CONSUMERS WHERE'= a ' and LOCALITY =: var1;
  
  When I try to use an ObjectID as parameter the result is returned property. ObjectID is unique for each line and thus a single row is returned
  in the result.
  
  Is it not possible to use the parameter query for non-unique settings?
  
  Help, please!
  I'm stuck with my project.
  
  Thank you very much!!
  
  Neha
  
  Published by: Neha39 on March 16, 2012 04:53
  
  Published by: Neha39 on March 16, 2012 05:15

  As your column data type, please use this one:

  SELECT ROWID, of GEOM FROM NOT_MY_CONSUMERS WHERE'= a ' and trim (TOWN) =: var1;