I lost the power 01/25/10, and I lost my express__it outlook is not responding, and that's where my mail is set up

Similar Questions

• DeskJet 932C - the power light is on and the cartridge flashing

  Hello! I know my DeskJet 932C is 'old', but it seems to be in excellent condition.  First time that I had a problem.  The power light is on and the cartridge is flashing.  When I open the cover, the plateau of the cartridge moves to the far left.  The arrow points to the unfortunate color cartridge.  The missed years ago color cartridge.  I use my printer to print B & W, so I've been printing with the empty cartridge in place for years.

  I removed a reinserted the color and B & W cartridges and turn on the power and turns off.  I used the HP print and scan doctor, and it's scan does not have something wrong, I clicked on print a test page, and nothing happens.  The test page is listed as 1 document in the queue.   Status: error - printing.

  The printer has been in its current position on my desk for years.  It was not known of any trauma... None does damage... no power failure.  It's clean.  Has been connected to 4 laptops and uninterrupted service.

  I prefer not to buy a new color cartridge.

  Would appreciate help.  I would like to know what it means and if there is a solution.

  Thank you!

  Focus21

  The printer will perform electrical cartridges to light control and a few other times.  If an error printing can be blocked to avoid damaging the printer.  Clean the contacts of the cartridge as shown in the document here can solve the problem, otherwise you will probably need to replace the color cartridge.  The 932 Deskjet will allow printing with an empty cartridge, but for years, the cartridge may fail electrically and needs to be replaced.

• well... try #3... I spend 80% of my life offline... off the grid, as I live in a remote area, the power produced by wind and water. CS5 or 6 is still available? I also hate the Basic applications to... any help here?

  well... try #3... I spend 80% of my life offline... off the grid, as I live in a remote area, the power produced by wind and water. CS5 or 6 is still available? I also hate the Basic applications to... any help here?

  We're just facing some misinformation: creative cloud, CC of Photoshop, Photoshop CC2014 are NO CLOUD. Yes, it is a name quite stupid, because.

  They install and run locally exactly like previous versions. They are different in three ways:

  1. simple integration of cloud services from Adobe to keep the files, which you can ignore.

  2 subscription only.

  3. you will need to regularly connect to the internet to verify your subscription status. Not sure it can be monthly. This could still be unsuitable for you of course.

• Will not empty the messages in my Outbox and keep messages to re-mailed every minute.

  Outbox will not be empty

  Will not empty the messages in my Outbox and keep messages to re-mailed every minute.

  You don't have to tell us what e-mail program use. If it's Outlook Express, then this is the answer.

  You have apparent dbx file corruption.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• WMM edition error message - ' cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. »

  I made a movie of 30 minutes or more in WMM, some of the videos that I imported I had to convert to wmv, to import into WMM. Once I went to publish the movie, after the publication of about 1%, an error message pops up saying something like "cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. "I have 8 GB of free space on my hard drive and I tried to burn a cd on a dvd, and save to memory stick, none of them have worked, the same message is displayed even if they have sufficient space available. There is no red x in the videos or photos that I imported, so no files are missing. Some files have been moved when they were converted, but the movie plays well in WMM.  I want to export to is in my documents is therefore always available. I spent hours trying to figure this out and I I still don't know what the problem with it! Help! I've also spent a lot of time to their conversion to avi to see if this helped and the same message appeared again.

  What is the format of your source of debtor files and how did you convert
  TO WMV?

  I can only imagine that you are using Vista Movie Maker 6?

  It's not really about the location... error messages can be very cryptic...
  The error that you mentioned usually appears when the source files in the project
  are damaged or are not fully compatible with Movie Maker and made
  in a movie file cannot continue. In addition, large complex projects can cause
  in this issue.

  In some cases, it may be possible to record in DV - AVI, during registration as
  . WMV fails: the following article explains how to save... Publish it in film...
  6 machine and the graphic link shows where the option:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  If the recording as long as DV - AVI fails... see the following articles:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Sometimes, it can help if you are going to... Tools / Options / Compatibility tab...
  and uncheck all filters.

• Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

  I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

  I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

  Hi Cierrajade,

  1. you have any third-party DVD burning software installed on the computer?

  Method 1

  You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

  For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2

  If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Method 3

  If the previous step fails, check if you can burn CDs using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with burning Audio files to a blank CD error "Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged"

  I recently burned music CD blank so I can enjoy some songs in the car. After that a few discs engraved with success, I received the message "Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged"when trying to burn audio. To see if it was the m drive, I tried to burn audio files to four separate discs and each of them had the error message. The discs are brand new and have no information on them. I do something wrong or is my burner disconnected? Thanks for all your help and your support! I hope that we can find the cause of this problem so I can continue to make the CDs.

  Consumers concerned,

  Cody bridges

  Could you also confirm that it is playing the discs ok?

  Run the sfc tool and see if it shows anything... instructions here.

  http://support.Microsoft.com/kb/929833/en-us

• What is the difference between the Test send, batch send and send quickly in e-mail?

  Hello

  What is the difference between the Test send, batch send and send quickly in e-mail?

  Thank you

  Rahul Bhambri

  Hi Rahul

  Shipping of lots: the option to send batch to create a campaign and send an email directly from the email editor.

  Fast-track dispatch: does not give rise to statement and when you send in a test by sending e-mail quick option its look like live image.

  Test send: sending e-mails to test that this function allows you to send a test email and validate the email to make sure that there is no problem with him before his deployment.

  Thank you

  edynamic expert Eloqua

• I bought Lightroom from a shop in Switzerland. Setup refuses the activation key, saying that the parcel is a forgery and that I need to contact the customer service. It's Saturday and I would like to install the product by Monday

  Hello

  I bought Lightroom from a shop in Switzerland. Setup refuses the activation key, saying that the parcel is a forgery and that I need to contact the customer service. It's Saturday and I would like to install the product by Monday! Is it possible to do? Thanks for your help, best looks.

  Dominique

  Thanks to you two, John and Kglad, for your responses. I have contacted Adobe and they had me download the package from their website. The problem was apparently with the package on the purchased version. Problem solved.

  Best regards.

• Hello, I am to confront with a concern to not open of Adobe Creative nails, it has downloads installs successfully on the desktop and that's where it becomes more complex, by clicking to open the disfiguring, nothing happens it makes no

  Hello, I'm confronted with a concern to not open of Adobe Creative nails, there downloads properly installs on the desktop and that's where it becomes more complex, by clicking to open the disfiguring, nothing is passes, that it does not simply open without road marking error, it would be someone to help me. I try to join (contact) support (medium) from Adobe in vain, I think that there is no link of communication with them. If one devoted is willing to do a service to give me some explanation (to be understandable) the procedure here is my Email: [email protected] thank you in advance, greeting.

  Kader, please try to uninstall the software and install it again.

  1. Delete creative cloud app - https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
  2. Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

  Let us know if you need help with it.

  Atul_Saini

• I get the message when I opened the Muse CC, that the latest version is here and that I need to download... But when I click on "Download the latest Version" and need me to request manager it say that Muse is "up-to-date"... I also download

  I get the message when I opened the Muse CC, that the latest version is here and that I need to download... But when I click on "Download the latest Version" and need me to request manager it say that Muse is "up-to-date"... I also downloaded a model Muse and it says when I open it I also need the latest version... Can someone explain why Iam getting this message and why I can't update?... Very appreciated

  Download the desktop app creative cloud using the link below: -.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Then check if you install button for Muse CC 2014.3

  Kind regards

  Neha

• After the change of username & password for wireless internet connection WiFi printer is not responding.

  Original title:

  Canon Pixma MG5200 (printer WiFi)

  I changed the username & password for my wireless connection internet and since then my WiFi printer does not respond after that I did mentioned the new configuration. I tried to reset the printer with its installation CD, but at the end of installation, I get a message that the printer is not found on the network. I also read the help manual, but I couldn't solve the problem... I really appreciate a clear explanation for having my printer answer & working again.

  Hello
   
   
  1. what exactly happens when you try to print? You receive an error message?
  2. other wireless devices work properly?
  3. what operating system is installed on the computer?
   
   
  Check if the printer is on and properly connected tour.
  Method 1:
  You can run the fixit from the following link and check if it works:
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Try the steps in the following article and check:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  You can also consult the following link:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  I hope this helps!

• The mouse freezes at startup properly off. Mouse only thaws and works correctly when I hold the power button to stop and turn back.

  I just got a new Inspiron 1545 computer 2 weeks ago and it works fine but I got a problem for the last two days where my mouse will freeze after that I stopped it using the stop option. When my computer starts you can move the mouse, but after a few seconds, it freezes, and you can't move the mouse but the keyboard works. I try to restart the computer with the option to reboot from the start menu and when it starts up to the top of the mouse freezes still. No matter how many times I try to stop or restart properly mouse unlock not. It only works if I stopped it by pressing the power and then switch on again. Any ideas as to what I could do to fix this?

  The sad truth is that the mouse freeze problem is back. I searched the forum for other solutions, but so far without success.

  I am currently using MS Wireless Mobile Mouse 3500 and just to make sure that the problem is with the mouse, I inverted this mouse on my other laptop which works also on Windows 7. Mouse freeze problem is replicated, which never happened before for my other laptop.
  Conclusion, until Microsoft is able to solve this problem, I opted for Logitech. I bought a Logitech M235 wireless mouse last night and keep your fingers crossed that the mouse freeze problem will disappear.
  Life is too short to be stressed more mouse freeze problem.

• XP freezes at startup then begins after the power is turned off and on again

  After a windows session and wait that my computer close, I usually turn the power off to the outlet.

  Upon restarting, the computer hangs on startup controls and can be recovered in closing with its power button press again to restart.

  The ideas people?

  I guess that if you leave your computer plugged into the wall - IE do not activate deactivate the plug - you do not have these problems?  If you turn off your computer by unplugging from the wall, the computer comes back on the motherboard battery to retain the BIOS settings (and keep the time as well).  These symptoms may be a sign of a low battery or motherboard failure. On the first power cycle, it attempts to recover the BIOS settings, and the second power up then maybe succeed.

  Check your motherboard battery.

  HTH,
  JW

• Shift of the computer; It seems that my laptop is lagging when it is connected to the power supply (AC adapter) and it works perfectly fine when it is NOT connected to the power adapter. Can someone help or diagnose the problem?

  This shift of computer thing had never happened before until about a week ago. The shift comes every 30 seconds or more and it occurs also when I switch between applications.

  Hello

  I saw this kinds of problems occur with the power strips and even UPS systems. And some similar questions have
  been solved using them actually, especially the UPS. If the power strip has important circuit protection
  He'll probably bad or you have very low power at first on this AC circuit.

  Solution is not to use the tape and maybe get a UPS with brown-out solution.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.