Output of change given by the system of response?

Similar Questions

• Date and time system continues to change each time the system starts.

  I noticed that the time and date of my home PC gets changed every time the system is booted. The default date is set for Jan. 2008, when in fact it should be July 2014.

  Also, my PC became slow death. I use Windows 7 on 1 GB of RAM, 250 GB PC. I used last my home PC 2 years back, but there has always been someone to use it.

  It shows the OS disk to 7 GB of free, when in fact I never installed or anything unnecessary stored on the disk of BONE; Whatever unnecessary programs were there, I uninstalled them recently, keeping just a few essential ones. After uninstalling, it shows to 7 GB of free, when in fact it should be more than that.

  I use Avast anti-virus, which I think is unnecessary, that its not to protect my PC and as other programs, too, is quite dead slow.

  The system is infected by viruses? Manually, I checked the system for viruses and clean the system of all unnecessary and, program files, but I'm still not sure whether it is a virus or a PC problem.

  I am a COMPUTER analyst, and's just done it 2 days that I use my PC at home. I could format my PC, or where applicable be buy Windows 8 with a new processor.

  Please advise.

  Thank you and best regards,

  Ralph Davidson.

  Hello

  You really need a minimum of at least 2GBs of RAM to run Windows 7 well enough.

  As you have only 1 GB of RAM, which seems to be one of the reasons why it is slow.

  Increase the physical RAM or try ReadyBoost:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  Looks like you have some problems.

  Wrong Date/time

  If after you set the Date and time, and then stop and restart your machine and the time returns to the year 2008, and she did this whenever you reset, then restart the PC you have a CMOS battery has failed in the motherboard.

  They cost about $5 and are easy to replace.

  How to replace a CMOS battery.

  http://www.computerhope.com/issues/ch000239.htm

  ________________________________

  For hard disk space:

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  And for general maintenance on your machine:

  You should have used Malwarebytes in previous advice here on hard drive

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary make mode safe mode with networking: AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  @@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• TouchSmart 610 1150y: No Audio output device is installed after the system recovery

  I recently experienced an issue that forced me to do a system recovery. I upgraded Windows 10 months passed without problem from 7. After saving, I did the recovery. The Beats Audio System will not work now and the system indicates device output Installed in no..

  I tried to download drivers without impact. I also uninstalled the audio controller (IDT High Definition Audio CODEC) via Device Manager and rebooted him the system. Doing so resulted in a warning on the unit triangle. When I try to download software updates for it, it starts to download the driver, and then sends an idicating error message that a driver has been found but the device does not work. The audio worked perfectly until I ran the recovery, so it seems not to be a hardware failure.

  

  Can you suggest a way to solve this problem or to diagnose the problem?  Thanks for any help you can provide!

  Mark

  Finally! I found a solution! A Google search for a Codec IDT pilot lost in Windows 10 randomly suggested another thread here on the HP Forum. After several suggestions, is affected:

  1. Select IDT High Definition Audio CODEC on Device Manager.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4. Select-> Browse my computer for driver software.

  5. Select-> let me collect a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  Displays warning message, but the answer Yes.

  7. Windows has updated your driver software.

  Key is step 6.

  Perfect! Worked like a champ!  Problem solved... just took me two weeks to find.

• Limit of 2 TB on 2nd HARD drive, how to change without affecting the system reserved Partition?

  I have 2 drives - 240GB SSD where Windows is installed and a HD in Toshiba 3 TB of data.

  After installing Windows 7 for the SSD, it creates a system reserved 100 MB Toshiba hard disk partition. I now want to create a single data (d) on the Toshiba partition but disk management only limit myself to create a partition of 2 TB and a 746 GB partition. Past posts to dig suggests it's the MBR problem - then what can I do now to break this limit, without deleting or play with the 100MB system reserved partition?

  

  Hi YT :)

  You're right, that this problem is caused by the fact that your hard drive is cut using the style of partition table MBR, which allows only to create partitions to a maximum of 2 TB size each. In order to 'break' this limit, you must convert your hard drive in a GPT partition table, which does not have this limit (well, the limit to 128 TB then there it doesn't matter much). You can convert your hard disk from MBR to GPT without loss of data. Follow the instructions in the tutorial below:

  http://www.thewindowsclub.com/convert-MBR-to-GPT-disk

  Method 2 and 3 explain how to perform the conversion without loss of data, method 3 is the easiest.

  Let me know if you have any questions.

  Yoan

• change greetings from the system unit

  is it possible to re - register unit system messages, such as, instead of the voice of unity, saying "wait while I transfer your call" he said: "Please wait while I transfer your call.

  Thank you

  Rob

  Glad your problem is solved. Could you rate the position or positions that contributed to ' d.

  Thank you

  Brandon

• Can it be made possible for Windows 8 undo changes made to the system to a date without go as far as to factory settings?

  My problem is what happened after that I accepted an update yesterday on the Samsung "Keis' program already downloaded on my computer in order to transfer pictures from my Samsung mobile PAYG on my computer.  However, many no longer works, it has left my phone Samsung Galaxy Ace corrupt!  So, my question is, in an attempt to salvage something from the situation, is it possible to go back to the previous update, perhaps through Windows, but do not go as far as factory settings?  If this is not possible at the moment, would be - this something that Windows 8 could make possible in the future?

  Instructions Samsung "Keis' originally downloaded on my computer using Windows 8 to allow the transfer of photos from a mobile phone to the computer via a USB cable.  Apart from a few points of friction, he mainly worked initially.  But, before that I tried to download a Update new pictures yesterday, marked up waiting to download, that I accepted without question before continuing, as it was on the official website.

  How I wish I hadn't, because it has turned into a nightmare!

  Whenever the connection on the phone is on my computer & USB connection on my laptop, my phone hangs, signals a message that the SD memory card is missing and turns black.  The screen only comes from back when the lead is disconnected and later, whenever I check my photo gallery to see if OK, I find pictures at random times and scrambled and is no longer able to put in order of date.  And each attempt, the multiplication rises while after 3 attempts, I find the number of photos now 171 of 61 or more.  It's as if the copy is not so much on the computer, but being bounced on the phone!

  Worse still, to try the less easy way of removing the memory card minute to a direct investment in the computer, it would not allow the withdrawal without a warning message to wipe out memory, if I did!  Try to send an email with the photos as attachments, has not worked either, as the frozen screen.  I also discovered that an application that worked before (either said passing on earthquakes), recognizes none!

  I have Samsung were advised to try to take out the battery, but did not have a difference when back and are still waiting to hear their technical staff to see where I'm going from here.  But, if I can't solve this problem, I stand to lose all the photos of my 'new '.  In the meantime, I managed to copy photos 'old' on Sky Drive computer, in which case I have to uninstall the program.  Unfortunately, one or two not copied remains, as Sky Drive seem to treat during the copying of entire folders and not individual photos to the breast.  Didn't know what title to put this sub, but thanking someone at - it ideas to help me in this incredible situation.

  For later use, you can do 'image' copies of backup of your computer - a snapshot in time.  If you have to return back is not in box 1.  There are probably several choices of software, I have one by acronis: True Image

• You cannot change the output type and format in the page requests system - PeopleSoft process

  Hi all

  When I navigate to the PeopleSoft process scheduler page and try to run a process I see the output type and format web and txt only. I am unable to change the output type and format. All formats and types of output are marked as active in the system settings page. I'm super user of the system as well. I have as well the role of Admin ProcessScheduler. I would like to know if someone has already faced similar problems.

  Thank you

  Vimal

  

  Run the following SQL query to your OPRID:

  SELECT A.CLASSID, PSPRCSPRFL A.OVRDOUTDEST, PSOPRDEFN B WHERE B.PRCSPRFLCLS = A.CLASSID AND B.OPRID = '';

  Make sure that OVRDOUTDEST = 1.

  If it's 0 then you have to fix your configuration profile of the process as follows:

  -Main menu > PeopleTools > Security > list permission > CLASSID research (white list) back to top query

  -Go to the process tab

  

  -Click on "process the profile permissions

  

  S ' ensure that 'substitute an output Destination' is checked. Click OK, and then save.

  

  This should solve your problem.

• Changed my password as an administrator, the system won't take new or old password, how to fix? can only connect as a guest.

  PC Gateway, end 2011 change the password to my newspaper as an administrator.  System would never new password or the old password so I'd go just as a guest, but that does not allow me to download.  Now to the point there are things I need to download because I am currently working at home.

  Hello

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  And this is the Information from Microsoft on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  See you soon.

  p. s.

  There are a lot of repair Vista and recovery information in the connection of the gateway, including the recovery to factory settings.

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

• On the system restore running the message says "system not restored" and error 0 x 80070005 is given - how to solve this problem & get sys restore running again?

  Original title: on the restoration of the system running the message says "system not restored" and error 0x80070005 is given - how to fix & get sys restore running again?

  A ran the system restore, it goes through the entire process, then said "System Restore does not restore the" files etc, nothing has been changed.

  Error 0 x 80070005
  All + ve help would be appreciated

  Hi Rodianna,

  I know you've tried some of these steps... but try this exactly showing how. First one marked 'reply' then the following below this one.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-7-system-restore-error-code-0x80070005/11c3f465-559d-4F35-B8B7-9bc010972247

  Let me know what happens.

  B Eddie

• How can I change the system on my imac OSX 10.11.4 Administrator?

  It's on a new iMac (2016). I SHOULD be the system administrator. Firefox won't let me update because it says I don't have permission and need to contact my system administrator. Ugh.

  This happens with all apps or just Firefox? If it's just FF, and then in the Finder choose FF and right-click to get the information. In the sharing and permissions permissions are checked. Open the triangle. The permissions should be:

  Me > reading and writing

  Admin > read-only

  all read-only.

  Click the lock and authenticate you to change

• How can I change the language of the system?

  Hello

  Installation of the system, I chose the wrong language (in English)

  Now, I want to change in German.

  Thanks for any help

  René

  System Preferences > language and region

  Click on the "Plus sign" to add German.

• How to change the serial number when the system board is replaced

  How can I change the serial number of the system in the bios of a D530 SSF when replacing the motherboard?

  Hello:

  I suppose that if that's all you can do with this utility, then it of all you can do.

  I do not think I said that the utility likely to modify or add the model number, nor asked the question originally.

  You will need to contact HP technical support and have a technician HP bios with any other information you need to tattoo.

  Paul

• How can I change the system icons

  Anyone know how I can change some icons in the system (e.g., Recycle Bin, control panel)?

  When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem. Also indictate what version of operating system is installed on your computer.

  In general... Control Panel (all) > customization > change desktop icons

  Please send Bravo

• Satellite P100-437: change the system from Vista to XP

  I am currently running vista on my laptop. I want to change the system for windows xp and I can't find the drivers.

  Pls help

  Hello

  Satellite P100-437 is a part of the PSPAGE series
  If you want to download the drivers, you must choose this serial number.
  I found the XP drivers for this laptop on the page of Toshiba Europe

  Check it again Buddy :)!

• E/s digital USB-6008 changes when the system starts

  I was intending to use the USB-6008 housing in a critical application in which the digital I/o lines are used to trigger relays.  The relay should activate when I ask them programmatically.  Otherwise, they must remain open.  The problem is that during a reboot of the operating system, the e/s digital USB-6008 go up and down several times - opening and closing my relay.  It is not acceptable for my application.

  Is it possible to prevent the lines to reach logical high except if ordered to do so?

  There is no way to set the startup on the 6008 States.

  As the system USB boot devices and turns on power to the computer and off the power to the USB ports, on the DIO lines go up and down several times.

  You will need to put a logic of material extra, just after data acquisition to ensure that potentially dangerous output combinations cannot affect the relay and the elements they control.