Output text file? Possible?

Similar Questions

• Save the pdf file as format changes to text file

  Hello

  When you save a pdf file as a text file in the format of the resulting text different from the original PDF file ist.

  For example:

  PDF-file text

  X 1                                                X1                         (missing blank)

  X 1234-4567 X (new line added)
  1234-4567

  Would it be possible that some characters see and not visible of those responsible for this behavior?

  Any help will be appreciated

  Concerning

  JH

  It depends a lot on how PDF files is created.  If they are simple conversions for example Word documents, then the output text file will also be probably simple.

  If after that the original text of the creation has changed, added, moved,..., then there may be hidden items in which can no longer be transformed into a similar looking text file.

• In a sequence of CTF, is it possible to obtain a text file of sequence clips display? There is a display of text file for clips (cmd-9). Zoom the timeline cancels the ability to see the whole sequence of the time line.

  In a sequence of CTF, is it possible to obtain a text file of clips in sequences display (name and duration)? There is a display of text file for clips (cmd-9). Zoom the timeline makes this visible annotation for shorts, cancels but the ability to see the whole sequence of the time line. Of course, it would help my editing.

  TIA

  In Final Cut Pro 7, you can use editing > find command to search on used clips in the sequence. See if there is an equivalent command in FCE. Unfortunately, I can't determine that at first hand on my system. (In addition, if you are still interested whereas FCP X, there the so-called Timeline index which provides quick access to a list of markers, clips, effects, etc..)

  Good luck.

  Russ

• Save the waveform output to a text file when VI runs continuously?

  How can I save waveform output to a text file when I start my VI permanently?

  I do power profiling and you want to save voltage drop measures continuely.

  Oh... I see. I wasn't aware of this.

  This is my first time using LabVIEW, so I used one of the example files. There, I just added "Write file to measure" with total input current... and because I used using buttom "continuous run", I added the Activate button to control when I write of the measurement files.

  However, ideally, I want to run x seconds or x minutes and then stop without turn off the device that is connected to the battery Simulator of NOR. At present, its reset whenever I hit the 'run' button, which makes me put in place the special test device I want to measure again.

• Compare 2 text files data and output match

  Hi all

  I need some advice.

  First of all, in BinaryCode.txt data are thus:

  Replace BinaryCode0 1 0 0 0 0 0 0 0 0
  Replace 1 0 0 0 0 0 0 0 1 BinaryCode0
  Replace 1 1 1 0 1 1 1 1 1 BinaryCode1
  Replace BinaryCode1 1 0 0 0 0 0 0 0 0

  the first line of the text file is the header. So I need to check if the names in the second column (BinaryCode0 or BinaryCode1) appear in the Timed_Sets.txt file.

  Timed_Sets.txt data as such:

  BinaryCode0, 6, 40...
  BinaryCode0, 7: 40...
  BCName1, 0, 20...

  BCName1, 1, 20...

  For example, as BinaryCode0 is a match that I pulled out the line whole Timed_Set.txt in another table.

  I worked on a program, but I do not get the expected results.

  Text files and VI are attached.

  I appreciate your kind assistance in this matter.

  Thank you

  Concerning

  Kart

  If I understand what the output should be so what you essentially have to do is walk through the column for each unique value and BinaryCode.txt, pull the corresponding lines of Timed_Sets.txt. There are a variety of ways to do this, depending on the amount of data you have and whether or not you can use any kind of prior knowledge as to the actual content of the file (for example names of key search). It's a joint way. Modify if needed.

• Is it possible to precede the text in a text file?

  Hello people,

  Is it possible to add text at the beginning of a text file?  In other words, insert text at the beginning of a text file and just 'pushing' the rest of the content of the file to a top offset rather than overwrite the existing data?

  Thanks for the help!

  Chris

  Hi Chris,

  No, this isn't...

  You can make the trivial way: lire read in the ancient text, precede the header, write the full text again...

  Or the safe way:

  -write the header to the new file

  -old file (in blocks) to read and write in Add mode to the new file

  -remove the old file

  -Rename the file to have the name of the original file

• Is it possible to get the details of the file (for example the subject and comments) off the screen and to an Excel file or a text file without having to retype this information

  Is it possible to get the details of the file (for example the subject and comments) off the screen and to an Excel file or a text file without having to retype this information

  * original title - file details *.

  Hello

  Could you explain what is exactly? What do you mean by off the screen?

  According to my way of thinking, you want to export the file details of all your files on your HARD drive to an excel file or a txt file. If I'm right in this case, it is not possible to export the details of each & every file in the excel sheet.

• What happens in a batch file when you try to redirect the output of a command in a text file? How did it break the lot?

  I have a lot that downloads the files, and I want to redirect the output to a text file.  The lot is set up similar to the following:
  Set ftp = c:\ftp.txt
  hdir = Set / mydir
  Define ldir = c:\temp
  echo open monsite.org > ftp %
  echo user > ftp %
  echo pw > ftp %
  echo get myfile.txt > ftp %
  echo mget my*.dat > ftp %
  to echo bye > ftp %
  -I - s FTP: ftp % > "c:\temp\ftp.log."

  This lot works perfectly if I redirect the output of the ftp command, but, when I redirect the output, I get a logfile with 3 lines as follows:
  no connection
  mget my*.dat
  Good bye

  I tried the commands different redirect, with undesired results
  > & (which causes only the batch to close by anything in the logs)

  Why is - what this redirect would break the batch and the ftp script in particular?

  This is now fixed; was a simple mistake really, but thanks for all the help anyway.

• Can not get the result of the command output to a text file...

  Hello

  I tried to get a list of my virtual machines (using PowerCLI) with CBT (block change tracking) enabled, and while the following command returns the results, I can't have it at the output to a text file. Any help you can offer would be appreciated.

  foreach ($vm in get - vm) {write-host $vm; get-advancedsetting - entity $vm | select-string - pattern 'ctkEnabled' | sort; write-host | out-file c:\somepath\file.txt}

  I get the correct result on screen, but the text file is empty.

  Please notify.

  Thank you

  Hello, wmilligan2013-

  You can get the information to an output file by removing the Write-Host calls.  How to do:

  Get-VM | Get-AdvancedSetting -Name *ctkEnabled* | Sort-Object Entity,Name |    Select Entity,Name,Value,Type | Export-Csv -NoTypeInformation -UseCulture c:\temp\advSettingInfo.csv
  

  Which will be, for any virtual computer that has a * ctkEnabled * advanced configuration, parameter information advanced output for such virtual machine to the CSV file in the appropriate location.  It relies on the ability to Get-AdvancedSetting to accept the VM objects as the value to - entity from the pipeline (so the foreach statement is not necessary) and used the - param Name of this cmdlet, avoiding any disorder Select-String.  I used Export-Csv to the output method so that you can easily consume these data later if you need to act on these data or even manipulate it.

  How does do for you?

• Is it possible to turn the dilemma 2 projects (.2qn file extension) in Adobe Captivate 8 projects? I tried to save the embarrassing situation in a text file, but Captivate wouldn't import correctly.

  Is it possible to turn the dilemma 2 projects (.2qn file extension) in Adobe Captivate 8 projects? I tried to save the embarrassing situation in a text file, but Captivate wouldn't import correctly.

  Hello

  I've never seen such a method. I think you will find that you must simply recreate your dilemma inside Captivate project and forget all means of import.

  The only thing that comes to mind would be to import the project dilemma in PowerPoint. (Assuming that such a thing exists) then import the PPT in Captivate. But you wouldn't be able to make everything connect.

  See you soon... Rick

• Backup SQL + output to a text file

  I have to use SQL + on one of my databases. No way around it. So I'll write my queries, execute them, check the output, tweak them and run again if necessary. So I could start with
  

  SELECT
  ename,
  job
  FROM
  emp;

  Once I know that it's working properly, I wrap it in a procedure so I can get the data in a text file:

  SET TRIM ON
  SET PAGESIZE 2000
  SET SERVEROUTPUT ON SIZE unlimited
  EXEC DBMS_OUTPUT.ENABLE(null)
  --
  SPOOL c:\mySQL\out.txt
  --
  BEGIN
  --
  DECLARE
  --
  CURSOR c_cur IS
  --
  SELECT
  ename,
  job
  FROM
  emp;
  --
  BEGIN
  --
  DBMS_OUTPUT.PUT_LINE(
  'NAME|JOB|'
  );
  FOR r_cur IN c_cur LOOP
  DBMS_OUTPUT.PUT_LINE(
  r_cur.ename||'|'||
  r_cur.job
  );
  END LOOP;
  END;
  END;
  /

  Then I import into Excel as data delimited on the pipe.
  
  works fine until I have decide that I really need a column more. So I made changes on the SQL code, and two more changes in the part of the output (one for the title and one for the LOOP)
  I was wondering if someone had written a cool procedure I could run across ALL SQL, and he would automatically know my names to column write the titles and then to loop through data automatically.
  
  I'm not tied to the use of the exact procedure I described above. The key is, I'm looking for a general procedure that I can run any script through, and it will load the output for me, without further changes.

  Hello

  Why do you not consider creation and HTML file which can be read easily with Excel.

  that is to say:

  SET SERVEROUTPUT ON SIZE UNLIMITED
  SET LIN 500
  
  SET DEFINE OFF
  SET UNDERLINE OFF
  SET TAB OFF
  SET FEEDBACK OFF
  SET VERIFY OFF
  SET TERMOUT OFF
  SET PAGES 9999
  
  SET MARKUP HTML ON TABLE "cellspacing=0 border=1" ENTMAP OFF
  
  spool myexcel.xls
  
  /* Replace the query below as you like */
  SELECT * FROM EMP;
  
  spool off
  
  EXIT
  

  The format is HTML, but once you load in Excel, you can easily save the format you like.

  Kind regards.
  Al

• How do I redirect the CELLCLI output to text file

  Hello
  I want to redicrect the cellcli command output to a text file.
  For example, how do I redirect the output of this command to a text on/tmp file
  

  CellCLI> list metrichistory where objectType = 'CELL' -
  
  and name = 'CL_TEMP'

  Thank you

  cellcli offers similar to sqlplus coil features:

  CellCLI> help spool
  
    Usage:  SPO[OL] [ [ CRE[ATE] | REP[LACE] | APP[END]] | OFF ]
  
    Purpose: SPOOL : Direct the results to the file .
             SPOOL OFF: Turn off the spooling.
             SPOOL: Check the current spooling status.
  
    Arguments:
      : The filename where the results will be output.
  
    Options:
      [APPEND]: If the filename already exists, the following output will
                be appended to the file. Without this option, the existing file
                contents will be replaced.
      [CREATE]: If the filename already exists, an error is reported.
      [REPLACE]: If the filename already exists, the contents will be
                replaced.  This is the default, when no option is provided.
  
    Examples:
      spool myfile
      spool myfile append
      spool off
      spool
  

  But if you try to add a script, it would be easier to simply execute the command line:

  # cellcli -e "list metrichistory where objectType = 'CELL' and name = 'CL_TEMP'" > /tmp/CL_TEMP.txt
  

  Also look at the dcli that allows you to run commands cellcli on one or more cells of a compute node.

  Good luck.

• Output to a text file

  Nobody knows how to output to a text file.

  I have a timestamp and when a key is pressed at the last level I want to output a Boolean variable in a text file, preferably to the desktop

  It is a simple .swf that I created.

  OK, I've managed to do:

  var file:FileReference = new FileReference(); Create a filereference object

  var flag: Boolean = false; Create the variable

  function taketheticket(event:MouseEvent):void

  {

  trace ("change is" + flag); prints the value of change

  leader. Save (flag, "result.text"); saves the value of the indicator in a text file named result.text

  gotoAndStop (8); go to the section 8 and stop

  }

  When the above method is exectuted it allows you to select a particular destination.

• is it possible to convert a check into readable text file?

  is it possible to convert a check into a readable text file?
  
  Also, I can say that the content of the control files you will find in the alert.log?
  
  Thank you

  PhoenixBai wrote:
  is it possible to convert a check into a readable text file?

  Also, I can say that the content of the control files you will find in the alert.log?

  See previous answers.
  There is also an undocumented option to see a dump of debugging of certain other information in a control file if you have access to your trace files:

  alter session set events 'immediate trace name controlf level 16';
  

  From memory I think level 16 is more complete emptying, but there may be another level this report more.
  Do not experiment with this on a production system.

  Concerning
  Jonathan Lewis
  http://jonathanlewis.WordPress.com
  http://www.jlcomp.demon.co.UK

• Exports still possible chapter mark sometimes a text file?

  Is it possible to export the values of timecode for the brands of chapter again as a text file?

  J. D.

  Unfortunately, no.

  It would be a very welcome feature, however, if there is a way to export only the chapter markers in a separate file, not linked to a video file.  In this way we could use with our external MPEGs created.