Outputs audio multiple simultaneous sessions in windows 7

Similar Questions

• I want to activate the outputs audio multiples to be active, so I don't have to wear my helmet all the time, or need to disconnect anything to the speakers.

  Pretty simple question really. I want to activate the outputs audio multiples to be active, so I don't have to wear my helmet all the time, or need to disconnect anything to the speakers. I checked the 'sound' thing in the Control Panel, but the enable option is not letting actually work. So if I want friends to hear my video games or something else, I turn on my speakers and they can hear it now.

  Thank you.
  Windows 7, 64 bit.

  Audio original tittle: multiple

  Windows does not support this. This is handled by the device drivers or hardware - if they don't support the outputs multiple, you can try the search for an alternative solution.

• Try to restore the output audio multiples

  Hello, just joined the community of Windows 7.  Installed the RC.  Having some sound issues.  I was already a Windows XP user and the sound automatically went out to several devices, such as speakers and headphones.  I now find in windows 7, its fate only to the device "by default".  How can I change this so audio output goes to several devices again.

  In addition, just in case this is related.  My system has the front and back of the microphone inputs.  I had always used the front microphone jack.  Right now, my system is only says he uses the rear Mic Jack.  I tried to in the spirit of taking precedence no chance.  No big deal, except that it's really bugging me that I can't do this.  Check the Bios and have played around with the system devices.

  Note that my current config has the output of the speaker to the rear, headset and microphone from the front.

  You can expect that the speakers, microphone and headphones work 'PlugNPlay' that you insert the plug. Mixer devices appear as the sounds occur. The first problem can be linked to the second and separate speaker/headphone may be a problem with your audio driver, but I expect to find a settting in the tab "speakers' Panel of------Sound control to determine single or double performance for audio output. The microphone records don't step forward is unlikely to be a problem with audio driver. If its edge, the chipset drivers will do. I would like to download the latest driver chipset on the desktop, and right click to "troubleshoot compatibility" and try the Vista Mode. Approach of Oct 22 GA version, I think you can see new drivers showing, probably on Windows Update.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• ENVY 15 t-j000 quad edition cto: outputs audio switching does not work in windows 10 birthday when the headset is connected

  Hi guys.

  As you know in 10 anniversary update windows, you can switch between outputs sound when the headphone is plugged directly from the sound icon in the taskbar, but it does not work as it should. If the headset is unplugged then the sound comes from the speakers and they are plugged in when the noise is coming from the headset and I can't select speakers. It shows two devices, but when I select one of them the speakers are selected. Also I tried to playback devices, but still, I can't put the headset as default playback device. She is forced to be like the only communication device. I've updated the audio driver but nothing has not improved. My audio driver is codec IDT high-definition. In addition, I tried the generic driver from the sound of microsoft, which is called "codec high definition audio" and it shows a device like speaker and it doesn't detect any helmet or communication device. So, what's the problem? I am able to use this option of windows 10 birthday or not? If yes how? I need this option because I use a headset a lot and I don't want to plug them each time. Thank you for your attention. I can give additional information if it is needed and I'm hear to help.

  Hi David,

  If you remember, I had problem with the IDT driver after upgrade to windows 10 and other updates. I'll be back to tell you good news. Finally, I solved the problem partially and I'll explain what I did.

  Today, I found that there is some audio drivers in the microsoft catalog site, so I went out there and looked for a codec high definition audio. A list came and saw that there are three tempo IDT Audio driver that are compatible with windows 10. They are all IDT Audio driver version 6.10.6504.0 and they are made in 2015. I downloaded all the drivers of three and tested. The first two of them does not solve my problem but the last which is "Tempo driver update for codec IDT high-definition" made in 08/05/2015 with 13.1 MB did the job. I must mention that you need to install this driver on generic windows sound driver for good results. If you install hp IDT drivers probably do not get good results. After installing this driver now I am able to switch between outputs audio (headphones and loudspeakers). The driver can detect my headset exactly as what it is. He shows me an output until I plug in my headphones and it then adds another exit in the helmet. I put my headphones or internal speakers as default playback device which I couldn't do with other drivers. There are just two problems that does not matter much to me, and I can't ignore them. The first is the light of the button mute on the keyboard does not work with this driver which is not very important, and the second is that there is no Equalization of beats in this driver and instead there is an audio driver IDT, which is very similar to the equalizer, but it beats not affect only the internal speakers the headphones that is more important to me because the sound via the headphones is very clear and good. If there was some ablity to HP to change this driver and add audio beats and allow also the light on the button mute then it would be perfect. The link for this driver is here:

  Driver IDT tempo for windows 10 and put on subsequent day

  Just download the latest driver with 13.1 MB size and enjoy.

• Satellite C660 - Broken output Audio Jack

  Hello ;)

  I'll give a brief overview of how it happened. I was listening to music, with the speaker cable plugged into the audio output jack. I myself am moved suddenly, not realizing the speaker cable was wrapped around my leg, pulling off so it out of the output audio quite violently. I quickly realized that I had broken the audio output jack and not the speaker cable, as the helmet also doesn't work at all and the stereo cable works fine in my flat mate's laptop.

  My question is this: is it possible to switch the audio output with the mic/line Jack Jack?

  It would be a very simple way to solve my problem. I searched in google and it seems that some people can do with their audio drivers/software. I searched via the software "SmartAudio' very limited in the Panel, and as far as I can tell it is absolutely useless. Windows possess sound settings gave the answer either.

  In any case, is anyway that I can do this? And if not, which was to replace the sound card? Or is integrated into the motherboard sound card?

  It's hard enough for me, being a somewhat creepy audiophile, any help in this matter would be much appreciated

  > My question is this: is it possible to switch the audio output with the mic/line Jack Jack?
  No, I don't think that this is possible. The microphone and headphone jack are part of the motherboard
  I m not very well if this tiny part can be replaced separately, I guess that's not possible, and in this case the motherboard needs to be replaced :(

• Help! OUTPUT AUDIO BACK DECISION-MAKING DOES not!

  Hi, I have a problem with my AUDIO OUTPUT device. I use a M2N68 AM PLUS Asus MBord, all sounds drivers are updated and works OK. but my problem is that I don't hear anything from the speaker. Notification of speaker level icon is bouncing up and down and detect sound but not the speaker output. Another thing is that my DECISION-MAKING of OUTPUT AUDIO BACK not detect plugged or disconnected devices. My realtek on that HD Audio Manager of PANELS of OUTPUT REAR are blurred and only the FAÇADE are active that does not work as well. I hope someone can help. Thank you!

  Hello

  1. If it works well before?

  2 did you change on your computer before this problem?

  3. you receive an error message?

  You can try these steps and see if it works very well.

  Step 1

  I would like to you can check if the rear speakers are disabled and the volume level is fine.  To do this, follow the steps below.

  1. Click on start.
  2. Click on Control Panel and click on sound.
  3. Playback tab, click speakers and click Properties.
  4. Click the levels tab and check if the back entrance is set to mute and uncheck the box.
  5. Select the level to 100% and check if the speaker rear works fine.

  Also, you can try disabling the improvements and check if it helps.

  To turn off the improvements:

  1. access Control Panel

  2. click on its

  3. Select the play tab

  4. Select entry speakers/headphones

  5. click on Properties

  6. Select the tab improvements

  7. disable all improvements

  Step 2

  Try to perform a system restore and see if it works very well

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Step 3

  If the steps above don't you may need to contact the manufacturer of the computer to verify that the equipment works very well and has to be replaced or the motherboard

  It may be useful

  Concerning

• How many applications can be opened simultaneously in the windows xp family

  How many applications can be opened simultaneously in the windows xp family

  There is no limit.  The number of requests, we can run simultaneously depends entirely on the way which many system resources (cycle of the CPU, RAM, disk HARD get/write activity, etc.) each program "consumes", and how much RAM and computing power (CPU) you.

• How can I play flac Audio files with extension on windows media player

  How can I play flac Audio files with extension on windows media player

  Hello jesskenneth,

  Thank you for visiting the Microsoft answers Site.

  The extension Flac is not a type of supported Windows Media Player file. However, you can user your favorite search engine to search for a solution that can convert the file in a supported file type Windows Media Player.

  For more information on the types of files supported by Windows Media Player, you can also view the following link:

  Information on the types of media files that supports Windows Media Player

  Thank you

   

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Two sessions of Windows Media Player?

  How can I run two sessions of Windows Media Player - one to play a movie, one for playing a playlist of music?

  Hello
   
  You cannot run two instance of Windows Media Player at the same time and this is normal. However, you can run a third-party media player and Windows Media Player, but there will be sound conflict.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Use a third party software is at your own risk.

• Error when you try to publish movies with Windows Movie Maker: another user is running Windows Movie Maker on this computer. Please close the other session of Windows Movie Maker before starting Windows Movie Maker again.

  Movie Maker will not film because of "another user is running Movie Maker on this computor... publish »

  I'm trying to publish a movie on this computor in Windows Movie Maker. The files are .wmv with a band his .wav and are all stored on my computor. I performed this task with success several times and there is enough free space on the computor.

  When I click on publish, there are a few seconds where he tries to publish, but then the program goes into a gel and the dialog box appears with the following: "another user is running Windows Movie Maker on this computor. Please close the other session of Windows Movie Maker before starting Windows Movie Maker again".

  When I click Close, there is an icon of wmv on my desk with the title of my project, but it is empty. I am the only user on this computor and I am puzzled as to why this should be implemented. I tried to turn the filters but nothing helped. One thing that I tried was to publish the band sound and the titles and credits without video files and I found it worked.

  Any ideas?

  Thank you Volenteer J. How would you like to know if a .wmv file is corrupt? Is there something I can do to click the .wmv files that tell me if they are corrupt? I need to identify the files that are causing my problem.

  ==================================================
  Sorry... but it seems that I have more questions than answers.

  You said initially that you could publish the soundtrack and titles with success...
  I was wondering if you tried to add a .wmv file to see if you could publish?

  What was the source of the. WMV files? They are all from the same source?

  They were converted from another format? If_Yes_ maybe another
  Converter would be worth a try.

  You change them widely? (split, rotation, transitions...)

  There is a possibility that you could import the Windows Media .wmv files
  Encoder and convert them to... .WMV to .wmv. Seems pointless, I know...
  but it would create a new .version of the. WMV files and can fix that
  perhaps never the problem.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Media Encoder 9 Series
  http://download.CNET.com/Windows-Media-Encoder/3000-2212_4-14887.html

  Using Windows Media Encoder 9 to convert a video file to .wmv
  http://help.UNC.edu/3940

  Re-index WMV files
  http://www.jhepple.com/support/reindexwmv.htm

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Applications of multiple simultaneous connection with invalid password saturates the UDP ports and can lower the infrastructure of database 11g.

  Problem statement:

  
  

  Multiple simultaneous connection requests with invalid password saturates the UDP ports and can bring down the 11 GR 2 (11.2.0.4) database infrastructure.

  
  

  When the API try to put applications that is not able to connect and DB is still suspended as long and we restarted to solve the problem.

  
  

  So, I'm curious to know if a fix is available for this problem without having to restart the database.
  

  Multiple simultaneous connection requests with an invalid password

  Have you tried to use the password?

  can lower the 11 GR 2 (11.2.0.4) database infrastructure.

  I have to say that I am skeptical about this claim. I didn't know the database or the listener down due to attempts to connect not valid. Can you give us an error message or two confirming this?

  The right course of action is to use the correct password in the application.

  See you soon,.
  Brian

• What type of driver sound has extension wav. Which audio driver should I download Windows 8 and how?

  What type of driver sound has extension wav? Which audio driver should I download Windows 8 and how?

  Sannia Hello,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  1. do you try to play audio files. WAV extension?
  2. If so, what happens when you play the files? They do not play, or you receive an error message or a code?
  3. What is the brand and model of your tab Windows 8?

  Thank you for details on the issue.

  File (WAV) Audio Waveform format is a Microsoft and IBM audio file format standard for storing an audio bitstream on PCs. It is an application of the Resource Interchange File Format (RIFF) binary stream format method for storing data in "chunks", and thus is also close to the 8SVX and used the format AIFF on Amiga and Macintosh computers, respectively. It is the main format used on Windows for audio usually compressed gross systems and not compressed. The usual bitstream encoding is the format for linear pulse code modulation (LPCM).

  Audio driver is common for all types of audio files. However, in order to play an audio file with a specific extension, you may need a special codec that you can install. You can refer to this article:
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-8

  Additional information:
  Download and install the drivers
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  I hope this information helps.

  Simply answer the required information and let us know if you need more help.

  Thank you

• Outputs Audio Split

  I used to be able to split the output audio until I upgraded to 9.2. Where at - it go?

  DNxHD, Cineform and uncompressed come to mind that formats that multichannel audio support.

  H.264 is one that doesn't.

• Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it's not

  Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?

  Hi Neil,

  Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.

  https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html

  Vinay

• Audio does not work in Windows, Safari 5.1.7 - Captivate v8 (HTML5)

  Audio does not work in Windows Safari 5.1.7 for my project CBT created in Captivate v8 and edited in HTML5. Need help urgent to solve the problem.

  You have installed QuickTime?

  End-users using Safari will also need QuickTime.

  Apple ends Safari for Windows support in 2012 with 5.1.7.