Over the busy schedules of Big

Similar Questions

• I have a large collection of big slideshows in iPhoto, created over the years with captions from the titles of the photos. How can I keep these slide shows subtitled in Photos?

  I have a large collection of big slideshows in iPhoto, created over the years with captions from the titles of the photos. How can I keep these slide shows subtitled in Photos?

  You can't keep slideshows as captioned photos.  Slide shows get migrated in the form of albums for the Group of photos is maintained.  But Photos don't have the ability to add descriptions to the slide show so that they would have to be manually added to each slide automatically.

  However, a possible solution would be to export every slide show in iPhoto as a Quicktime movie file. Which will keep the titles and descriptions on each slide.  The resulting QT files can be imported into the iPhoto library before migration or photo library after.

  

• How do we take a scheduled backup of the business rules of calculation Manager 11.1.1.3?

  How do we take a scheduled backup of the business rules of calculation Manager 11.1.1.3?

  Hi Celvin,

  We have to implement something like the utility formdefutil for Web Forms. LCM is an option, however, and we are looking for all the utilities. Please let us know is it is

  Thanks for your help!

• Cannot delete games using the Panel configuration or Big Fish Games Manager

  After a game that I'm not going to buy, I'm trying to remove it with Big Fish Games Manager, but he has not worked, then I go to control panel, programs, highlight the game, uninstall.  The two methods are not working, they could remove a game once out of five times.  I get a message, wait for the last item is removed.  Usually I turn my Dell/Vista 32 Bit MS Office Small Business 2007, so I can start over the removal of these games.  Big Fish response is to go to the control panel.

  Nordine salvation,
   
  1 have you made changes to your computer recently?
  2. you receive an error message when you try to uninstall the game?
  3. If Yes, what is the exact error message you get?
  4. what game you try to uninstall?
  5 are you facing this problem only with specific programs?
  
  I suggest you to follow the steps and check if it helps.
  Method 1: Perform a clean boot and check if it helps.
  How to configure Windows XP to start in a "clean boot" State
   
  Note: Make sure you perform the steps in how to configure Windows to use a Normal startup state
  to start your computer normally.
  
  Method 2:  Follow the steps and check if that helps.
  Problems installing and uninstalling programs on Windows computers
   

• Scattered all over the hard drive downloads

  Trying to gain some control over the download process; I always put Firefox 'always ask me where to save files. For the first half of the life of FF that worked perfectly well. Save a file that is brought to the top of the corresponding dialog box, showing the location that I lasted sauvΘs and asking if I wanted to re-use that one.

  I can see how that might be a concern of privacy on a shared computer, such as the list of recently used files that comes with so many applications, but it has never been a concern for me.

  What bug the absolute $% & % $& % hell out of me is that FF now appears most goddawful of random places as suggestions. No matter hoe, I always use the same folder, FF suggests places that are literally everywhere in the hard disk without detectable rhyme or reason. I waited patiently for the development team correct everything they did to make FF cannot perform this simple operation he was quite able to reach with an apparent ease at least as far as his Phoenix days. But, alas, the output ' Let's Break everything "of the week schedule has never solved the problem.

  What gives? Someone at - it a fix for the problem? I know that there are affecting a lot of people just longer because I have heard the complaints.

  I added the Boolean preference. I wasn't sure if she would take effect without rebooting or not. Of course, I had not too long to wait... Crash-O-Matic pulled on plan and gave him the restart that he may or may not have needed.

  I used some time now and have not had the problem again. I will temporarily call this one resolved.

  Thank you, man. You can't imagine how crazy this thing driving me for how long.

• Try to install the OS but not big enough partition?

  Hello

  I'm a little lost... After you have reinstalled XP, I had a few problems.
  First of all, the program that I now have on my computer is supposed to have not passed the real thing on opening... I lost the disc, so I bought another XP (SP2) drive on eBay and I tried to install... It then says that as I have already a newer version (SP3) and therefore does not install.
  I thought I would just try to install windows 7 instead and forget XP but now I said, by the system, the partition is not big enough!
  My C drive seems to just have a BIG something or other and is great just 13 MB... the partition of F is NFTC and has more space it seems... can someone please tell me how I can expand the C partition, so I can install?
  Or do I just delete/clean everything and start over with an installation of windows 7?
  I'm really lost here and any help is welcome.
  Thank you.

  Before you start to wipe the drive clean, check first with the computer is capable of running Windows 7

  Run Upgrade Advisor for Windows 7

• Incoming callers get the busy signal and AA incorrect

  Hi guys,.

  I have two questions for which I have been unable to get answers from the documentation. I'll give you a bit of background:

  On the SPA9000 I configured line 1 with my VoIP service that uses iiNet here in Australia. She is saved and I can do some incoming and outgoing calls very well. I also have a SPA400 on the network that routes my landline Telstra (PSTN) phone system so that people can receive calls on this as well. For now I unplugged the landline of the SPA400 so that it is only 1 line VoIP which is active.

  1. The first problem is that when I'm on an outgoing call or called someone entering, the next person trying to call on our number gets our Messaging voice iiNet. This suggests that the SPA9000 said VoIP provider that I am on the phone and so busy. The thing is I'm getting the AA to answer calls and their route accordingly which means I can accept more than only 1 call via. Is there a way to stop the SPA9000 to say the VoIP provider who I am on the phone, so that nobody gets a busy signal?
  2. The second problem is that even if I set the AA advanced, and saved my own invite you for 5, 6 and 7... the AA is always respond with the default record (line 1). I thought that once I enabled advanced AA he was supposed to use my custom recordings? Does this mean that I have to record over the other guests (1-4) or have I not correctly cela configured?

  Thank you for taking the time to read this rather long post

  Thank you

  Thanks mate, I thought better meet and close this thread. Indeed, the first problem was with my ISP (VoIP provider). The SPA9000 appears in support of several incoming calls by default however I had to activate call waiting for my VoIP service for calls to never pass through to the SPA9000 if there was already an ongoing call.

  The second issue seems to be resolved from one day to the next, I came this morning and the auto attendant is all behavior suddenly himself. I can only imagine that there may be a period during which the SPA9000 needs before a new script of AA is implemented?

  In any case I have will mark this as a solution in case someone has these problems. If someone has all understand why there was such a delay in my new script 'start-up' AA I'd love to hear it.

  Thank you

  Chris.

• I'll be able to watch TV as well as the registered on my big screen?

  Watch tv

  IAM hang a HPLaptop my big screen HDTV with a vga to hdmi, also, I hooked a 950q of Hauppauge TV Tuner to the laptop. My question is that I'll be able to watch television and recorded shows on my big screen with this set up

  Technically, I don't see why not.  The cpomputer is essentially now a great passage by DVR device, although probably overvalued. ;-)

  The Hauppauge WinTV-HVR - 950Q (what specific model - model 01191, model 01176, model 0283?) allows you to watch and record TV, in a window or full screen. You can use the WinTV-Scheduler to record your favorite analog or digital TV shows using high quality MPEG-2. You can read your TV recordings to your screen any time.

  Your laptop, if you get it to display on HDTV, will deal with just the external screen as another monitor, and you can put whatever you want on it...  Including the output of the Hauppauge WinTV-HVR - 950 Q or his records.

• Windows backup - Some Confusion over the Date of backup

  I have back up once a week on Removable Drive L:

  When we look at control panel > backup and restore, I see that my last backup was on January 3, 2011, as planned.  I also see that three files have not been saved because backup Windows could not find them.  No problem.

  When I look at the Drive: Explorer > computer > l: However, I don't see that the folder that contains the backup is dated 12/26/2010 under "update."  I remember correctly, is that it is all the time that I turned on my backup to a C: partition on my removable disk L:, probably create this folder on the first backup on removable disk L:

  As time passes, the backup on L: folder should not reflect the date of the last backup?  How can I know that the backup works (see other than the correct data in the control panel > Backup and Restore)?

  Here are the results: right click on the inf file: containing the backup (the file displays the "Save" icon), then the properties > Previous Versions shows no available versions.  Properties > general tab shows the typical parameters of a file; e.g., size of 0 bytes, date of creation, etc.

  Because it is a folder, there are no properties > Details tab.

  Dating back to the control panel > Backup and Restore > manage space, I see that two backups are stored in the inf file: Reader corresponsding for scheduled backups performed two since I have configured backup for this drive.  Everything seems normal.

  On further reflection, it seems that Windows 7 works normally, because the "Date Modified" column in Explorer mode don't not one) that reflects the changes made to existing files in a folder root or additons b) new files/folders in a folder root were made; rather the 'modified date' refers only to the changes that could be made to the properties of the folder root after its creation that is, in terms of sharing, security, etc.

  Since Windows 7, at least, you have no control over the name of the backup that is created and used for the backup folder, and there is (apparently) no exception to the general rule of Windows about how the "Date Modified" column is - at least in the case of backups - it seems that a user is more or less in "trust me". , rely solely on the information available in the control panel > restore and backup to determne if the backup does not work (other than to do a restore of your time immediately after the backup, not a good idea).

  I guess that the preschoolers old like me just feel more comfortable using the Explorer to display the properties for the actual backup file and see the date of creation.

  Maybe a suggestion that might be implemented in next SP?

• What is the difference between the role of support and the user role in the business group?

  I know there are a few differences between the role of support and the user role in the business as business group elements and Management group

  editable settings . But I can't find any document that introduces more precisely what they can do, what they can't.

  Are there any articles or documents or other means that can tell the specific differences between the Director, support and user group?

  If you have not taken a glance at this map permissions by GrantOrchard you should. It is very useful to know what permissions each user role. The big difference between the role of support and the user is that the user can only do things for themselves and user support can do things on behalf of other users. There is nothing quite as granular as you specified.

• I bought the Adobe Creative Suite master collection over the past two years with my old mac. I bought a new mac, can I continue to use the old serial number? If not, where can I get the serial number?

  I bought the Adobe Creative Suite master collection over the past two years with my old mac. I bought a new mac, can I continue to use the old serial number? If not, where can I get the serial number? Where I am, I guess that contact to?

  Yes, your license allows you to have two facilities activated simultaneously, so if you want to you can have both machines busy and active so that there is a backup should it come in handy.  You can also contact Adobe via chat and ask them to reset your activations so that you have one (or two) released for a new installation.

• Help with button over the button (OnHover questions)

  I have a sat button A button B.  B button navigates to another point on timeline onmouseOut. A re acts as the B button onhover when hung on even though its only function is to go to a Web site when you click the button.  How to not to do so.  (it has something to do with the key a session over the B button that acts as a navigation panel.

  To illustrate, I have a circle (a ring) nagiavtion menu which is hover button B animtes, which actually look like the commuter ring to the Viewer.  When they mouse over button B he then times the next section of the scenario that seems to do the menu tilt back to normal.  So currently it is supposed to work like this:

  They hover over button B that comes alive to sign 10.  On board 10 the tilted wheel now has buttons of towing.  one to read a video and the other to go to the site for the link they flew over.

  When a person is placed on one of the buttons the tilting animation replays and retitls the wheels before the link becomes active to click which makes navigation uptight or bugged.  IWant the animation to play the 10 Panel and stay here, then they choose a button to click and only tilt back to normal when the user mouseout/mouseouthandler() the big underlying under button.

  Legitly evolves from the development of the object from one display to the other. Flash is required to send the MOUSE_OUT event as soon as your mouse cursor enters a new object because it is more on the previous object. This does not mean that you however he can only prevent.

  This is a pretty easy thing to manage with the code, but I need to know more about how to configure the button.

  Is the circle rotating a clip or a button? If it is a button that will take more work. If you have coded a MovieClip, then it will be easier.

  After that I know the answers to the above question, that the answer will result by setting just a few flags to know a condition. Once you have lost your drive in place and pop buttons on the screen, the MOUSE_OUT code will need to check that if you rode on all objects you do not want the drive to respond to the. I'll provide more code once you let me know how put you up.

• It is possible to program a HBR uses the Windows Scheduler?

  It is possible to program a (business rule) HBR running uses the Windows Scheduler? I know how to program calc scripts using Maxl, BATCH BACK and Windows Task Scheduler.
  Thank you

  In the post, I gave a link to it through the use of the PTRC, I might as well post the entire post again because I know of links must be difficult to click and then read...

  Yes, you can use the command-line rule business Launcher, in V11 is available in \Hyperion\products\Essbase\eas\console\bin (9.3 \Hyperion\AnalyticAdministrationServices\console\bin)

  Is an example of how to use it: -.

  If there is no prompt implementation first creates a file and put the following information in him filling the servername, the application name and the name of db example

  ExecDB: "planning/servername/appname/dbname.

  Save as .xml file, so something like connect.xml

  To use the Launcher command-line command from the directory where the utility is the command would be so

  Cmdlnlauncher - Sservername - Uusername - Ppassword - rrule - fconnect.xml

  If you have variables in your article, you can

  In environmental assessments do a right-click on the rule and select "Automate launch Variables", fill in the details and then save is an XML format.

  You just need to reference the xml code in the batch script as described above using the - f parameter.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• The icons are too big

  The icons are too big for the screen. I'm unable to reduce them. Can you help me?

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

  Try to assign layout.css.devPixelsPerPx 1.0 (default is - 1) on the topic: config page.
  If necessary adjust the value by 0.1 or 0.05 (1.1 or 0.9) until icons or text looks right.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  You can watch the Default FullZoom Level or NoSquint extension to define a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

• My m4v videos to view a preview, but now it is a generic white band 'film' with a blue dot. I used to fly over the icon and preview would play. Previews were an easy way of the video ID. How can I restore previews?

  My m4v videos to view a preview, but now it is a generic white band 'film' with a blue dot. I used to fly over the icon and preview would play. Previews were an easy way of the video ID. How can I restore previews? OS X El Capitan 10.11.4

  I'm ' dropped in ' the answer! By changing the name of the ".m4v" to ".mov" file preview is now fixed! Billy just got lucky...