Similar Questions

• Build a data table in a Subvi

  OK first of all, I will say that I am very new to LabVIEW.  I only started using it last week.  I'm used to other programming languages, so if I use a terminology that is not common to LabVIEW, I apologize.

  What I try to do is to collect temperature data and determine when it reaches steady state.  I collect data from a thermocouple USB DAQ in a loop with a user defined number of iterations.  Each of these iterations will in a table.  The mean and standard deviation are calculated from this table.  Everything I say is done inside a while loop and the standard deviation is low enough for the while loop ends.

  It works perfectly, but, there is always a but, I wanted to turn construction calculations, an average and standard deviation of array in a Subvi so that I can use it sometimes as steady state is a big part of what I test.  Also in this way I don't have to have the data table appear on the front.  The question that I try to convey the DAQ data in the Subvi.

  No matter what help do this, or suggestions on a more elegant way to determine the State of equilibrium is greatly appreciated.  I have attached the VI in its intact form and a JPEG of it with the part I want to put in a Subvi converted (boxed) in red.  Hope this is enough information and if you have any questions, concerns or suggestions, do not hesitate to post.  Thank you.

  -Kyle

  

  You take a single measure by the loop iteration, so to convert dynamic data to a single scalar rather than a table. Now you are left with a 1 d table after the loop and this whole mess to remodel is no longer necessary. All you nead is the Subvi to SD and the average which comes with LabVIEW and so you already have.

  You have a lot of conversions. "itérations" and "numeric" should be I32 (right clic... representation...) I32)

  This sequence of rube goldberg comparison is stupid. All you need is a single comparison "SD".<0.005" and="" wire="" the="" output="" to="" the="" loop="" termination="" condition.="" (btw,="" there="" is="" also="" a="" primitive="" for=""><>

  Seems silly to write all the raw numbers to a file every 10ms. It is probably enough for the 'means' in a log file.

  Why do you not use acquisition of single point and a loop FOR. You can not make an acquisition of hardware timed with points N and dT data, eliminating the loop FOR entirely?

• ORA-31693: Data Table object 'AWSTEMPUSER '. "' TEMPMANUALMAPRPT_273 ' failed to load/unload and being ignored because of the error:

  Dear all,

  OS - Windows server 2012 R2

  version - 11.2.0.1.0

  Server: production server

  ORA-31693: Data Table object 'AWSTEMPUSER '. "' TEMPMANUALMAPRPT_273 ' failed to load/unload and being ignored because of the error:

  ORA-02354: Error exporting/importing data

  ORA-00942: table or view does not exist

  When taken expdp and faced error mentioned above. but expdp completed successfully with waring as below.

  Work "AWSCOMMONMASTER". "" FULLEXPJOB26SEP15_053001 "finished with 6 errors at 09:30:54

  (1) what is the error

  (2) is there any problem in the dump because file as above of the error. If Yes, then I'll resume expdp.

  Please suggest me. Thanks in advance

  Hello

  I suspect that what has happened, is that demand has dropped a temporary table to during the time that you run the export - consider this series of events

  (1) temp table created by application

  (2) start expdp work - including this table

  (3) the extracted table metadata

  (4) the application deletes the table

  (5) expdp is trying to retrieve data from the table - and gets the above error.

  Just to confirm with the enforcement team that the table is just a temporary thing - it certainly seems it name.

  See you soon,.

  Rich

• How can I reapply style to data in a data table Spry HTML CSS?

  Hello.  I have Adobe CS6 installed on my computer and am new to the use of Adobe.  This is my first post.  To learn Dreamweaver, I read the book Adobe Dreamweaver CS6 Classroom in a Book.  I now do the Lesson 13 and will have trouble to do the part up to step 21 on page 342.  I have a Spry data table in two ranks, but he lost the CSS style applied in Lesson 7.  I can't reapply.  For example, the title was drawn on pages 194 and 195 using the legend of table content section.  To try to apply a new style, I chose the title, but did not see the style in the drop of class in the property inspector.  Otherwise, I control-click on the style in the CSS Styles Panel, apply in the context menu has been grayed out.  The following two sections of the Lesson 13, HTML data update and work with XML data seem to work very well however.  The second data table Spry to two rows, using XML data, has all the CSS styles.  The first table used in HTML, the file calendar.html (XHTML)data.  I couldn't find a table called calendar.html in the folder of resources 07 lesson (step 1 on page 184).  There is another difference between HTML and XML tables.  When the XML table has been transformed into a Spry data set, it lost the ID created in Lesson 9.  By following the instructions in step 11, page 343, it was added to the XML table.  The table using HTML data kept his ID when he became a Spry data set.

  Here is a screenshot showing the HTML above and XML tables downstairs.

  I hope someone can explain why the table HTML lost its style CSS and how it can be reapplied.  I tried to carefully follow all of the steps in the book.  Thank you.

  

  Look at the CSS file and, for example, see the following resources

  . Happy section table {}

  do-size: 90%;

  Width: 740px;

  margin left: 15px;

  border-bottom-width: 3px;

  border-bottom-style: solid;

  border-bottom-color: #060;

  border-collapse: collapse;

  }

  He translated means that you apply a style to an array element inside a section element that is inside an element with a class of content.

  Now, take a look at the markup and see

  Classes and green events

  Here we see a table inside an element with a class of content. Compared to the style rule, the section element is missing.

  Add

  and don't forget the closing (
  ) tag. The markup becomes

  Classes and green events

• MDM 2.0.1 - What is meant by the "rail" mdm data table?

  What are the 'rail' mdm data table? What they contain? Examples:
  * d1_dvc_k
  * d1_contact_k
  * d1_sp_k
  * d1_install_evt_k

  These tables are tables of 'key '. This concept is part of the infrastructure of the Oracle Utilities applications and is used to hold the values of the unique keys for entities among different environments. In the past it has been used for example by the engine of archive to ensure the key value of the transferred Scriptures to your archive, would still be to your live system. This would prevent the system to create a new entry with the same key as an input value in your archive.

• Deleted lines flashback: unable to read data - table definition has changed

  Hi all
  
  Its really Important.
  
  I unfortunately truncated a table using
  Trancate table mytable;
  
  and made an alter table to reduce the length of the pricision data.
  
  But I need back data of tabla
  
  I used the command to get the deleted lines, below, it shows error.
  
  query: select * from pol_tot versions between timestamp systimestamp-1 and systimestamp;
  error: ORA-01466: unable to read data - table definition has changed
  
  query: flashback table pol_tot to timestamp systimestamp - interval '45' minutes;
  error: ORA-01466: unable to read data - table definition has changed
  
  Well want to share your ideas how can I deleted thoose Records.
  
  Edited by: 887268 July 8, 2012 12:26

  This

  and Made a alter table to decrease data pricision length.
  

  is the cause of your error.

  Now please do what is obvious.

  -------------
  Sybrand Bakker
  Senior Oracle DBA

• ADFDI-05577: could not retrieve the data table on the server.

  Dear all,
  
  My use case is, when I opened my excellent work book, I have this error message is out ' ADFDI-05577: could not retrieve the data table on the server line "and when I click on the button 'OK' of the error message I can recover all the data on the server. Please help me how to solve this error?
  
  
  Concerning
  KT

  Thanks much Sireesha Pinninti, John Stegeman, Arun.

  Yes, my problem is of subquery. I found a solution from this site.
  http://www.DBA-Oracle.com/t_ora_01427_single_row_subquery_returns_more_than_one_row.htm,
  http://srinisboulevard.blogspot.com/2010/04/ora-01427-single-row-subquery-returns.html
  http://StackOverflow.com/questions/3804850/erroneous-ora-01427-single-row-subquery-returns-more-than-one-row / / the answer is the last line

  Before change (error subquery)

  CheckingEO.BO,
  (SELECT ntr_no FROM test
  WHERE cs_no = CheckingEO.CS_NO) NTR_NO
  To archive the CheckingEO

  Edit it like this

  (SELECT ntr_no FROM test
  WHERE cs_no = CheckingEO.CS_NO and Rownum = 1) NTR_NO
  To archive the CheckingEO

  Concerning
  KT

  Published by: KT on 23 May 2012 15:35

  Published by: KT on 23 May 2012 15:48

• HFM data tables

  Hi guru,.
  
  I use HFM v4 and I was wondering if anyone is familiar with the tables. I have a request to the data table (AppName_DCE_3_2011) 1. I can find the join to lEntity, lAccount, Acpb, lCustom1, lCustom2, lCustom3 and lCustom4 with the exception of lValue , which consist of 2 data: 17 and 56. I have search in the list of table that can relate with lValue and I can only find AppName_VALUE_ITEM table, but the data does not match with the value of data.
  
  Is there anyone know what is the meaning of 17 and 56 inside the lValue column?
  
  Very much appreciate your help.
  Thank you
  Anna

  Value item ID (an lValue) dimension for the tables of the WFD are derived from the table of CURRENCIES. The formula should be
  (Currency ITEMID x 3) + 15 = Total of currency
  (Currency ITEMID x 3) + 16 = currency Adj
  (Currency ITEMID x 3) + 17 = currency

  For example, if your first currency is USD (ITEMID = 0) and your second currency CAD (ITEMID = 1)
  $ Total = 15
  Adjs USD = 16
  USD = 17
  Total CAD = 18
  CAD Adjs = 19
  CAD = 20

  The offset of 15 are members of the dimension value in the VALUE_ITEM table.

  -Keith

• Space occupied by a data table

  Is there a way to know how much disk space is occupied by a data table?

  Try this:

  select
     segment_name           table_name,
     sum(bytes)/(1024*1024) table_size_meg
  from
     user_extents
  where
     segment_type='TABLE'
  and
     segment_name = ''
  group by segment_name
  

  Replace with your desired table name

• data tables store information of groups and users?

  Hi all
  
  I want to export all the information of users and groups on the Administration of BI tool. only I can copy them one by one. are there other methods?
  who knows what data tables store information of groups and users?
  
  Thank you
  Dan.

  Hi dan,.

  As you can not access the link which is very informative. Never I've implemented it but john's suggestion, it should work

  Courtesy John: -.

  OBIEE get all RPD users
  I had to get all the users a repository very large because they where to implement a new security model. Wrote a small script to make life easier:

  ' Read_Users.VBS
  "John Minkjan
  "http:// http://www.obiee101.blogspot.com/
  ' Get all the users from a repository
  1: do an export the PRD UDML using nqgenudml.exe
  2: change the location/name of file in this script
  3: run the script in the cscript Read_Users.VBS command line > users.txt
  Set objFSO = CreateObject ("Scripting.FileSystemObject")

  "this point your EXPORTSet UDML
  objFile = objFSO.OpenTextFile ("E:\names.txt", ForReading)

  Const ForReading = 1
  Dim arrFileLines()
  Dim strRLinedim strTemp1dim strTemp2

  I have = 0

  Up to objFile.AtEndOfStream
  strRline = objFile.ReadLine
  If left(strRline,12) = "USER to DECLARE" then
  ReDim Preserve arrFileLines (i)
  arrFileLines (i) = strRline
  i = i + 1
  end if
  Loop

  objFile.Close
  "Then you can iterate over it like that"
  For each strLine in arrFileLines
  strTemp1 = MID (strLine, 15: 50)
  IF instr (strline,"}" ") > 0 THEN
  strTemp2 = MID (strLine, instr(strline,"{") + 1, (instr(strline,"}") - (instr(strline,"{") + 1))) ELSE strTemp2 = «»
  END IF
  WScript.Echo MID (strTemp1, 1, instr(strTemp1, """)-1) &"; '& strtemp2 '.
  Next

  OBIEE get all users and roles of RPD
  In this http://obiee101.blogspot.com/2009/06/obiee-get-all-users-from-rpd.html post I showed you how to get users to the RPD. That take as a point of departure it is a small step to get users and roles they have and put the export in a XLS:

  ' Read_Usergroups.VBS 'John Minkjan' http: / / http://www.obiee101.blogspot.com/
  ' Get all the users from a repository
  1: do an export the PRD UDML using nqgenudml.exe
  2: change the location/name of file in this script
  3: run the script in the cscript Read_Usergroups.VBS command line > users.txt
  4: put the export in a pivot table XLS

  Set objFSO = CreateObject ("Scripting.FileSystemObject")
  "this point your EXPORT UDML
  Set objFile = objFSO.OpenTextFile ("E:\usergroup.txt", ForReading)
  Const ForReading = 1
  Dim arrFileLines()
  Dim strRLine
  Dim strTemp1
  Dim strTemp2
  Dim strTemp3
  Dim intRoles
  intRoles = 0
  I have = 0
  WScript.Echo "username; FULL_NAME; ROLE; COUNT. "
  Up to objFile.AtEndOfStream
  strRline = objFile.ReadLine
  If left(strRline,12) = arrFileLines (i) 'DECLARE the USER', then Redim Preserve
  strTemp1 = MID (strRLine, 15, 50)
  strTemp1 = MID (strTemp1, 1, instr(strTemp1, """)-1)
  IF instr (strRline,"}" ") > 0 THEN
  strTemp2 = MID (strRLine, instr(strRline,"{") + 1, (instr(strRline,"}") - (instr(strRline,"{") + 1)))
  ON THE OTHER
  strTemp2 = «»
  END IF
  arrFileLines (i) = strTemp1 &"; "& strtemp2
  intRoles = 1
  i = i + 1
  end if
  If intRoles > = 1 then
  If instr (strRline, "has ROLES (" ") > 0 then
  intRoles = 2
  end if
  If intRoles = 2 and instr (strRline, "a of the ROLES (" ") = 0 then
  strTemp3 = MID (strRline, instr (strRline, "" "") + 1.50)
  strTemp3 = MID (strTemp3, 1, instr(strTemp3, """)-1)
  WScript.Echo arrFileLines(i-1) &"; "& strTemp3 &"; 1 "
  end if
  If intRoles = 2 and instr (strRline)",") > 0 then intRoles = 0
  end if
  end ifLoop
  objFile.Close

  UPDATE POST
  Is your on the right track, work these steps you will find glory... I force try it or needed me.

  hope helped you

  Kind regards
  Murielle.

  Published by: Kranthi.K on June 1st, 2011 02:28

• Data tables example Oracle?

  Hello
  
  I created the thread SQL and PL/SQL... goes is the link
  
  
  Oracle example data tables?
  
  Any direction is greatly appreciated. Thank you!!

  Examples of Scripts diagram and descriptions of objects
  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28328/scripts.htm

  HTH
  -André

• Clickable bar or data tables charts

  Hello
  
  I displays a chart and a table of data for an account of some statutes. : Example A 10, B status: situation C, 30: 40.
  
  I would like to know if there is a way to make these graphics to bars or data table lines clikable, so I can go down in the State to get detailed information. Example, by clicking on the status bar or line in the data table, I would like to redirect to another page where I can show more details such as all users who belong to State A, etc.
  
  Please suggest.
  
  Thank you
  Pradeep

  Hello

  For a chart, you need to include a link rather than the null link. For example

  select
  'f?p=&APP_ID.:21:'||:app_session||'::::P21_DB,P21_SCHEMA:'||OEU_ID||','||OET_TBL_OWN_NM||':' link,
  "OEU_ID"|| '-' ||"OET_TBL_OWN_NM"  label,
  COUNT("OEU_ID") value1
   from "IBU_DBRTUT01"
  

  APP_ID.:21 means that he runs on page 21
  P21_DB, P21_SCHEMA are hidden on this page elements that store values (you need to create your own)
  *|| OEU_ID | «, » || OET_TBL_OWN_NM | * the values from the graph

  Paste the part of link in your series and then just edit these pieces. Then you must create items hidden on the page you want and do a query on this reference page the items hidden in a where clause clause

  For an interactive report you click a column (in the attributes report) attributes, and then pass the "links" section by passing values for the items you want.

  Mike

  Published by: Gerd on October 21, 2009 10:08

• Prevent overlap date (date)

  Hello

  I use Oracle 11.2.0.3.

  I have table of APPOINTMENT:

  (ID NUMBER PK, FROM_TIME, TIMESTAMP TIMESTAMP TILL_TIME, NOTES VARCHAR2 (200))

  I want to keep end users of appointments that overlaps with other appointments.

  I created this trigger:

  Create or replace TRIGGER  "APPOINTMENT_CK" 
   BEFORE 
    INSERT OR UPDATE ON APPOINTMENT  FOR EACH ROW 
  BEGIN  
  
  IF 
  :new.FROM_TIME  BETWEEN FROM_TIME AND TILL_TIME  
  OR
  :new.TILL_TIME  BETWEEN FROM_TIME AND TILL_TIME  
  THEN 
  raise_application_error
              (-20000
               , 'Please choose another date/time. The Dr is already busy in that time.'); 
  end if;
  END;
  

  But it seems that I can't use the name of column here. What is the solution?

  Kind regards

  SQL > CREATE TABLE "APPOINTMENT."

  ('ID' NUMBER (4,0) NULL NOT ACTIVATE,)

  ACTIVATE THE LEGEND "FROM_TIME" (6) NOT NULL,

  ACTIVATE THE LEGEND "TILL_TIME" (6) NOT NULL,

  VARCHAR2 (1) 'CONFIRMED' BY DEFAULT 'N',.

  VARCHAR2 (200) "NOTE."

  VARCHAR2 (1) 'CANCELLED' BY DEFAULT 'N',.

  Enable constraint primary key 'APPOINTMENT_PK' ('ID')

  )

  /

  table created "APPOINTMENT".

  SQL > alter the appointment of table add constraint appt_time_range check (till_time > from_time)

  /

  table altered APPOINTMENT.

  SQL > create materialized view appointment with rowid journal

  /

  materialized view created LOG.

  
  

  -Materialized view of the type of JOIN. You need the ROWID to compare with the materialized view log.

  -Each overlap will create a line in the materialized view

  SQL > create materialized view appt_no_overlap

  build fast on validation as immediate refresh

  Select a.rowid a_rowid, b.rowid b_rowid

  appointment a, b of appointment

  where a.rowid<>

  and a.from_time<>

  and a.till_time > b.from_time

  /

  materialized view created APPT_NO_OVERLAP.

  -The constraint is always false, meaning if there is no line in the MV of the constraint fails
  

  SQL > alter table appt_no_overlap add the verification of appt_no_overlap of the constraint (1 = 0) can be delayed

  /

  table altered APPT_NO_OVERLAP.

  SQL > insert into appointment values (1, trunc (sysdate) + interval '8' time, trunc (sysdate) + time-span '9', 'n', null, 'n')

  /

  1 inserted rows.

  SQL > validation

  /

  committed.

  SQL > insert into appointment values (2, trunc (sysdate) + interval '9' hour, trunc (sysdate) + time interval '10', 'n', null, 'n')

  /

  1 inserted rows.

  SQL > validation

  /

  committed.

  SQL > insert into appointment values (3, trunc (sysdate) + interval '7' hour, trunc (sysdate) + time-span '9', 'n', null, 'n')

  /

  1 inserted rows.

  SQL > validation

  Error report:

  SQL error: ORA-12008: error in the path of refresh materialized view

  ORA-02290: check constraint (STEW. APPT_NO_OVERLAP) violated

  SQL > insert into appointment values (3, trunc (sysdate) + interval '9' hour, trunc (sysdate) + time-span '11', 'n', null, 'n')

  /

  1 inserted rows.

  SQL > validation

  Error report:

  SQL error: ORA-12008: error in the path of refresh materialized view

  ORA-02290: check constraint (STEW. APPT_NO_OVERLAP) violated

  -Commit, if there is no line in the MV the constraint fails, everything is restored and the MV becomes empty.
  

  SQL > select * from appt_no_overlap

  /

  no selected line

• How do a continuous line when it is absent from the data table?

  I have a graph all the traces, but since there are blank cells on the table there are broken lines. I just need to know how to make them continuous.

  This discussion should be under the numbers instead of MacBook Air?  If so, remove needless zero data points or extrapolation can estimate points which are currently zero, as appropriate.  If zero points are valid results, consider changing a scatter chart.

• Use the type of data "table of container" in teststand

  Hello

  I have a problem with data type "table of container" in the TestStand.

  I defined an empty local variable in the form "table of the container" with the name "array_of_container1" and also a local variable as 'container' with a name "container1".

  The problem is, I can't insert the container1 in the array_of_container1 table.

  In the end, I want to get a picture of x items containers

  array_of_container1 [0] .container1,.

  array_of_container1 .container1 [1],

  ....

  array_of_container1 [x] .container1

  Thank you very much!

  Cabio