The combinations of keys FN on my Satellite L Windows 7 stopped working

Similar Questions

• Host process for Windows Services stopped working and was closed & Windows must now restart because the DCOM Server process Launcher service terminated unexpectely

  my computer keeps stopping and restarting itself. I get the same messages of 2 error: host process for Windows Services stopped working and was closed and; Windows must now restart because the DCOM Server process Launcher service terminated unexpectely. How can I fix? I used the norton support, run analyses of many, nothing has helped.

  None of the above works though... I didn't know by another forum to download Hitman 3.5 http://www.surfright.nl/en/downloads/home that he got rid of a virus that norton, Norton 360 and Malwarebytes antivirus support could not. I had no problem since :)

• Satellite L850 - webcam suddenly stopped working

  The web cam on my Satellite L850 has suddenly stopped working.

  It does not appear in Device Manager;
  I downloaded the latest driver on the Toshiba site;
  I checked the BIOS and the web cam is turned on;
  Always when I open the web cam application I get the following message:

  "webcam initialization failed Please restart request and camera control.

  I scoured the advice forum and short of a return to the top and reboot disk HARD, I find no reasonable answer. I can't back up as I am away from home is out of the question. I need web conference call cam / call my family to the United Kingdom back.

  Tired of going round in circles and getting nowhere.

  Any suggestions?

  Post edited by: mrclean

  Even if you have not changed the settings in the BIOS, you must Access the BIOS to make sure that the webcam is turned on it!

  I also recommend the suite of this workaround:
  Uninstall the webcam software
  Uninstall the VAP
  Uninstall all software needed the webcam (Skype, etc...)
  Now, restart and install CCLeaner (cleaning of freeware software)
  Reboot once more.
  Run CCleaner and clean the system and the registry.
  Reset
  Now follow with installation of VAP
  Reset
  Install the webcam software
  Reset
  Test webcam.

  Good luck

• CD/DVD-Rom on a Satellite 1110 laptop has stopped working

  Hello

  The CD/DVD-Rom on my satellite 1110 has suddenly stopped working. When I insert a cd or a dvd there is no activity in the drive and when I look in my computer there is no recognized files.

  I used the Device Manager and it says that the device is working normally. It's like the PC just can't 'see' the camera more.

  I used the program of troubleshooting without success and I was wondering if someone technically a little more spirit that had me ideas

  See you soon

  Rob

  Hey, sorry cannot be of any help to you, but I'm having exactly the same problem. I can't find a place to download the new drivers.

  did you progress?

• Windows has stopped working. Window is to check a solution to the problem...

  I can't open the files in windows and whenever I opened a folder, there will be a pop-up window indicating the windows has stopped working and it checks for a solution to the problem.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• MacBook pro stolen the question, 'Find my mac' still works to erase personal information if I put it before changing the icloud/itunes account password?  or is my phone app stop working when I change the password?

  MacBook pro stolen the question, 'Find my mac' app still works to erase personal information if I put it before changing the icloud/itunes account password?  or is my mac app stop working when I change the password?

  Unless you fully active 'find my Mac' BEFORE that your mac has been stolen, it can't do anything for you now. It is not active, and there is no way to make it active after the fact.

• Windows Defender stop working after the malicious software removal tool

  I ran windows software and after this removal tool, my windows Defender stopped working says its turned off, but when I try to turn it on nothing happens

  This problem can occur because another security application is used or the Windows Defender service has stopped, or components of Windows Defender are corrupt.

  You install any new programs recently? Windows Defender is not designed to protect against the extent of malware. If programs like Microsoft Security Essentials and Windows Defender both run, your system may experience degradation in performance and other problems caused by the conflict of two services providing real-time protection at the same time. I recommend that you keep the Defender off if another application of security protection is running.

  If no similar security application is installed, I suggest that we have follow these steps to resolve the problem:

  Step 1: Check the Windows Defender service
  =================================
  1. click on start, in the search box, type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. double-click on the service "Windows Defender".
  3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Then please click on "Start" under "Status of Service" to start the service.

  If the problem is not resolved, please refer to step 2:

  Step 2: Save the associated DLL files
  ========================
  1. click on start, type "cmd" (without the quotes) in the box start the search. Right click on CMD listed above and click 'run as administrator '.

  2. in the command prompt, type the following and press ENTER to each order:

  regsvr32 atl.dll

  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 softpub.dll
  regsvr32 mssip32.dll

  3. close the command prompt, and then run Windows Defender.

  If the problem persists, please after return.

• Explorer Windows has stopped working. Name of the damaged file: wmp.dll

  Original title: Windows Explorer has stopped working

  There seems to be a lot of discussion on this issue.  I tired some of the patches, but some of my numbers seem different from what other people have.  The problem is on my laptop.  I try to connect to my router and have internet access.  My office is a new computer with Windows 7 installed.

  When I try to open my network center and sharing on my laptop, the computer thinks for a while, and then I get the Windows Exporer stopped working window.

  ProblemEvent name: InPageCoFire

  Error state code: c000009c

  Type of media loopholes: 00000003

  Name of the damaged file: wmp.dll

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 4105

  Additional information 1: fd00

  Add information 2: ea6f5fe8924aaa756324d57f87834160

  Add information 3: fd00

  Add information 4: ea6f5fe8924aaa756324d57f87834160

  I am at a loss!

  Thank you

  Kevin.

  Hey Kevin,

  You will need to run the command above in the elevated command prompt.

  Refer to this step help: How to run a command with elevated privileges?

  After you run the command of high fashion, you should get the message, "" DLLRegisterServer in wmp.dll managed."

  Also, you can run the method 2 regardless of the success or failure of the method 1. Please try these methods first and see how it goes.

  Normally, it is appropriate to fix this problem by running SFC scan and you would not need to copy the file.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I got an answer from Microsoft after a "windows has stopped working" I have to delete the virus Win32/Small.CA.

  Original title: Win32/Small.CA

  I got an answer from Microsoft after a "windows has stopped working" I have to delete the virus Win32/Small.CA.  I ran the security scan and the answer was "no viruses or malware found."  Could someone tell me how to deal with a Win32/Small.CA and how to determine if I really get it.  Thank you.

  Hello
  Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• Whenever I turn on my laptop the first thing he tells me is that Pamke.exe has stopped working.

  Original title: pamke.exe

  Whenever I turn on my laptop the first thing he tells me is that Pamke.exe has stopped working. Can someone tell me please, what the heck is trunosc? I googled but no dice. Is there something wrong with my laptop? How can I fix? I'm kind of a perfectionist, and I'm tired of seeing it every day. Any help would be greatly appreciated. Thank you.

  Hello

  1. When did you start to question?

  2 did you recent hardware or changes to the software of the system?

  Method 1:

  You can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Method 2:

  You can also read the following article to run the Microsoft Safety Scanner and perform a full scan on your computer.

  Microsoft safety scanner

  Note: When you perform the analysis, there are chances of losing the data that you can take a backup of important data before performing analysis.

  Hope this information is useful.

• I just download aa3 game without problem, uninitialized probs, but as soon as I start the game a window appears saying "error, windows has stopped working", what is wrong?

  I just download aa3 game without problem, uninitialized probs, but as soon as I start the game a window appears saying "error, windows has stopped working", what is happening, please help.

  Hello
   
  Follow the suggestions and see if it helps.
  Method 1
  You can check if the problem exists in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Method 2
  If the problem persists, you can uninstall and reinstall the game.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can provide the event logs in Event Viewer.

  You can provide the exact error in the Event Viewer logs to find out what caused the problem.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  You can also see the article for more information.
  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

• Family using in Windows Vista Premium 32 bit, I have error "host of transformation for Windows has stopped working" when you turn on the PC.

  Original title: Windows Vista 32-bit Edition home

  Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.

  HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.

  Nobody knows what's happening with pc or how that I should do to fix this problem.  Any help or advice will be

  appreciated.

  Thank you

  EJ

  Hello

  1. you remember to make changes to the computer before this problem?

  Method 1:

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Put your computer in a clean boot state and then check if the problem persists

  Follow step 1 in the link.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3:

  The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.

• Microsoft Windows has stopped working a problem due to the closing of the program

  original title: MICROSOFT WINDOWS has STOPPED WORKING A PROBLEM CAUSE THE PROGRAM to CLOSE__

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • MICROSOFT WINDOWS HAS STOPPED WORKING
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Aries19,

  Are a. When you this error?

  B. recent changes made on the computer?

  C. when exactly do you get this error?

  D. don't restart your computer / closed applications after this error?

  Let us try these methods.

  Method 1:  [Scan sfc] System File Checker

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. click Startand type cmd in the box start the search.

  2. right click on cmd in the list programs and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command calls, the following line and press ENTER: sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Visit the following link for more information:

  http://support.Microsoft.com/kb/936212

  Method 2: Virus Scan

  You try to run a Microsoft online virus scanner and check if it detects something.

  http://www.Microsoft.com/Security_Essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Method 3: Clean boot

  Clean boot uses a minimal set of drivers and startup programs and helps eliminate software conflicts.

  (a) click Start, type msconfig in the start search box and press enter.

  (b) under the Services tab, check hide All Microsoft Services.

  (c) under the Startup tab, click on disable all, then click Ok.

  (d) If you are prompted to restart the computer, click Restart now.

  When the computer is in a clean boot, applications and third-party services are disabled. Once the computer is restarted, check if the problem occurs right now.

  Check out this link that talks about how perform a clean boot
  Note: Follow all of the steps in the link to know what software are contradictory.
  http://support.Microsoft.com/kb/929135

  Don't forget to reset the computer in a Normal startup once find you what software is conflicting.

  Hope this has been helpful.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• When connecting with an Android phone through Verizon for attaching to the internet, receive the message "Microsoft (C) registry of Windows has stopped working".

  twice now that I got "Microsoft (C) registry of Windows has stopped working". Looking for online solutions, it tells me to update... and yet my Windows Update is underway. What is going on??

  I am traveling and using my Android phone by Verizon to tie to the internet... This could be the cause?

  Hi BetheForcia,

  Exactly when you receive this error message?

  Usually, this can happen due to data execution prevention.

  In order to diagnose the problem, you can check in the event viewer to determine the cause of the error and after return with details of the event viewer.

  What are the information in event logs? (Event Viewer)

  You can try to add it in the exception for the prevention of execution of data and check that it works.

  a. go to Start, Control Panel and click on System.
  b. now, click on the Advanced tab, and under performance, click settings.
  c. click on Data Execution Prevention , and then select the Turn on DEP for all programs and services except those I select: radio button.
  d. now click on the Add button and navigate to C:\Windows\System32 and choose the regsvr32.exe file. When you receive the message indicating it could make your computer becomes vulnerable to attack and unprotected, simply click OK to continue.
  e. click OK , and then click OK to exit

  Hope the helps of information.

  Please post back and we do know.

• Not Microsoft Windows - bar tasks or the Start button "register Microsoft windows not updated, (he is) Microsoft Windows has stopped working".

  On the computer startup, there is no button or the start task bar.  window appears reading: "Registry Microsoft windows not updated, (he is) Microsoft Windows has stopped working."  I could get on the internet, but I have a blank desktop!  What should I do?  Re-stall the disc?  I have a tower HP w / Vista bought in 2008.  THX, Lizz

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Let us scan SFC and check that it prevents this error to occur.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
  To do this, follow these steps:
  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
  
  Method 2.
  a. also, you can try again user account if the problem is resolved.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
   
  b. If the problem does not occur in the new account user set your user account damaged. The steps to fix the corrupt user account are given below.
  Fix a corrupted user profile.
  http://Windows.Microsoft.com/en-in/Windows-Vista/fix-a-corrupted-user-profile
   
   
  Let us know if that helps.