Overview chart resolution - experts question

Similar Questions

• resolution iPhone question

  Hi, I have a few pages in the normal ipad resolution 1024 x 768, and I want to now change the resolution of the iphone 5/6

  couple questions:

  -is 1136 x 640 the correct resolution for that?

  -How can you usually / what is the best way to resize/change resolution on each article to this resolution?

  Thank you

  If you create a folio 1136 x 640, it will be displayed on the iPhone 5 and later, but not iPhone 4S and earlier versions.

  I think that the best approach is to use the functionality of other layouts in InDesign. But keep in mind that the layout of 1024 x 768 converted to a layout page 1136 x 640 would be probably too small for the iPhone. In order to maintain the same level of the SD, consider creating an alternative page layout that is the scale of 50% (568 x 384).

  See Digital Publishing Suite help | Creating content DPS for iPhones.

• CW3D chart fill color question

  Hello

  When I use CW3DGraphLib_CWPlot3DSetFillColor on a lot that I created in the IUR, everything is OK apart that the value of blue is actually red and vice versa with the red color value.

  When I add a new path using CW3DGraphLib_CWPlots3DAdd and then change color with CW3DGraphLib_CWPlot3DSetFillColor the color displayed is not the same when I put the same color value to the plot that I created in the IUR.

  Worse still, it is not possible to set the color in white or black. RED, GREEN and BLUE have the same value, the result is always gray.

  What I did wrong?

  Please find attached a test program that demonstrates this behavior.

  Bertrand

  Hi Bertrand,.

  I found the other setting, you need to change to get the fill colors to look right.  When you create a new path, the new path takes the properties of the PlotTemplate object.  In this case, the default PlotTemplate object has the property ColorMapStyle the value "1 - cwShaded" by default.  If you change this "0 - cwNone ', the behavior will be the same as your other parcel of land.  Please let me know if you have any questions!

  

  NickB

  National Instruments

• Experts Question Remote Desktop connection...

  I'm looking for someone with a lot of experience with Windows Remote Desktop Connection to answer a basic question or two...
   
  I have a WireShark capture (one side unfortunately) which shows 880 MB sent from the client connection remote desktop, running on the host. but I have no capture WireShark volume package from the host of the IP address of the client. The capture is for a period extending over 32 hours. I wonder trying to determine (guestimate) the amount of data that would have been sent between the host and the client... I know it's a real question here; That's why I'm looking for someone with real experience of connection Office remotely.
    
  Given that if the volume of traffic from the client to the host is 880MBytes more than 32 hours; is it at all possible to guess how much would have been sent between the host and the client?
   
  Please be nice, it is important and this is all the information I have.
   
  Thank you!

  Hello

  Welcome to the Microsoft Community forums.

  I suggest you to send your query using TechNet forum for this issue.

  Check out the link to post your query to the TechNet forums.

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  I hope this helps. If you have any other questions, we will be happy to help you.

• resolution iPhone question 6 DPS folio

  Hello

  We have an existing application for the iPad (folio multi with subs) DPS.

  I am redoing to include the iPhone.

  I have configured the folios in 1024 and the HD version for iPad, it seems ok. I tend to make assets rasterised at 50% so they look ok upward.

  Should what resolution I use for the iPhone? If I understand correctly, I'll need to do the "renditions" - two, to take into account the proportions different (3:2 and 16:9). Unlike the iPad, I'm better artworking for iPhone 6 more size and down (Alt layouts), or could I work at 5 and use a similar method to make them clear for 6 and 6 +? He will pick up the res 6 5s and 6 +?

  Thank you

  Matt

  The viewer of the iPhone has no support even for an iPhone 6 / 6 + return. You should design for the iPhone 5, indications that we have, is that iPhone 5 content seems perfectly fine on the iPhone 6 without change.

  Neil

• Resolution / sizing questions

  I know, I know... often asked and repeatedly answered... did a search but couldn't really find an answer right/s ok, let's go...

  Master work sent to me by someone else... did in CS2 Mac. I use CS3 PC.

  1 / How can I find out the default document preset resolution? And change it if necessary? The file is print quality press.

  2 / bound and then integrated images... Let's say that the file original.tif is 18 cm x 12 cm at 300 dpi. The final size of the document is 9 cm x 6 cm. Is it better to scale up to the final, real size used in PS or is it ok to let Illustrator (CS3) the scaling?

  Suggestions to use InDesign are not welcome that is not an option...

  See you soon...

  TIA

  JJ

  Jay,

  2 / so, without loss of quality?

  No loss.

  Jacob Bugge wrote

  I'm sorry.

  ?????

  Post #4 here: http://forums.adobe.com/thread/477743?tstart=30

• Get an overview of Windows 10: 2560 x 1440 screen resolution missing

  I am running the most recent image of the W10 Pre x 64 under VMware Fusion on a MacBook Pro 15 "(mid-2012 7.1.1; Yosemite; Lightning monitor).

  Everyting in German.

  So far no problem.

  The only thing that is massively annoying me is that exactly the native screen resolution of my monitor (2560 x 1440) missing which is not the case with Windows XP Home edition, 7 or 8.

  I found advice on Internet how to add screen resolutions to previous versions of Windows (Vista, 7), which are essentially based on the registry changes.

  However, here I have failed, since I wasn't able to locate in W10 all the necessary registry entries.

  Microsoft have them or if they are simply isn't more/still present.

  I have not observed this Windows 8.1 with pre W10 x 64 running under VMware Workstation.

  Disable 3D acceleration.

  Windows 10 overview chart resolution technical question on iMac

• VY101EA: hardware upgrade

  Hello, I have a question, if anyone knows if its best to upgrade my hardware to my laptop by parts new or better to buy a new laptop, I thank you for your time. My system includes the following:

  INFORMATION SYSTEM computer manufacturer Hewlett-Packard computer model 3659 Operating System (OS) Microsoft Windows 7 Home Premium Edition Service Pack 1 (build) 7601, 64-bit Operating System operating system build 7601 (version) 6.1.7601 (o/s) 0408 language o/s Internet browser system RAM 6.2 GB [1] Internet Explorer browser Version 9.11.9600.17420 [1] Version of the .NET Framework 3.5.30729.5420 CD or DVD device hp BDDVDRW CT21L SCSI CdRom Device system Hard Drive preview system storage total size : GB 465.7 Internet browser [2] Firefox Version of the browser [2] 32.0.1 (x 86 el) memory detail 6.2 GB available physical memory Total 3.8 GB Total virtual memory 2.0 GB physical memory drive 0 model WDC WD5000LPVX - 55V0T Type SATA Bus Maker physical drive 0 WDC WD5000LPVX - 55V0T Type SATA Bus Maker model

  GRAPHICS graphics product INFORMATION [1] nvidia geforce gt 230 m video memory 3.7 GB current chart resolution 1366 x 768 current 32 Bits per Pixel color depth

  Model MOTHER INFORMATION undetected card manufacturer 3659 AA number undetected seller Hewlett - Packard BIOS BIOS Version Hewlett - Packard F.1C BIOS release Date 17/05/10 system memory 6.2 GB Sound card NVIDIA High Definition Audio

  INFORMATION of PROCESSOR manufacturer Intel model tools Intel Core i7 CPU Q 720 @ 1.60 GHz processor Intel analysis Tools of analysis processor Intel CPU speed 1.6 GHz link to link to the specifications of the processor specification CPU CPU Type CPU Revision 04 00 1E 06 model of processor CPU Stepping 5 CPU family

  INFORMATION networking WIRED Wired Networking product realtek pcie gbe family controller driver Version 7.73.618.2013 Hardware ID PCIVEN_10E C & DEV_8168 & SUBSYS_36 59103 C REV _03

  WIRELESS NETWORKING product INFORMATION of broadcom 43225 802.11b/g/n wireless networking driver Version 6.30.223.99 ID material ms_sstpminiport

  Not much upgrade to make. You have the processor i7 - 720 M, which is I think the second best processor that will fit in your motherboard. It seems that you have 8 GB of RAM, which is the maximum. The only upgrade I think that may be possible and worth is to replace the hard drive with an SSD. Boot time and application launch time will be improved enormously, but things like the game or whatever it is UC will not help much.

  Your laptop is not very old, but just old enough for some really cool as recent developments USB 3.0 date back to front. A concert 256 SSD will cost $129 may be where a new laptop with very strong specifications will cost $800-1500.

  In order to give the best advice, I would need to know exactly what you're doing with your laptop and also what you think you can do 2-3 years. If you use it just for internet and e-mail, as well as office, I say make the SSD. If you want to play demanding games or editing videos or to compile the Code, I say, get a new laptop.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Airport of flashing light - tried EVERYTHING... Help!

  I had a work of wireless setup at home... until a few days ago. Here's the story...

  Setup

  Modem ARRIS of Charter. Airport Extreme Basestation (MC340LL/A). Network with Airport Express (MB321LL/A). MacPro hard wired to Airport Extreme via ethernet. The rest of the House has a wireless access (iPhones, iPads, AppleTV, iMac, MacBook Pro)... geez, we have a problem with Apple, lol!

  Question

  Woke up at the no internet. Not called Charter, no crashes, reset the modem and nothing has changed. This led me to focus on my network configuration. No matter what I I find myself with a flashing orange light on the airport with Airport utility, telling me that it doesn't have an IP address.

  Interventions

  • Reset Arris modem via the power cycle and reset button. Lights on the modem are happy, airport still flashes.

  • Hard wired modem to MacPro. Huzzah! The Internet works if the modem does not seem to be the issue.

  • Power cycled Airport Extreme - blinky.

  • Soft reset on Airport Extreme - blinky.

  • Factory reset via the Airport on Airport Extreme utility - blinky.

  • Factory reset button reset and electric supply - blinky.

  • Airport Extreme removed equation and tried to use the Airport Express Terminal only - blinky.

  • Power cycled, soft reset, factory reset via Airport utility and factory reset button reset and connection - blinky.

  • Disconnected EVERYTHING. Got the modem starts, connected charges Airport Extreme - blinky factory reset.

  • Swapped cables - blinky.

  Now, that's the weird part for me. The modem seems to work very well because I have access to the internet when I plug the MacPro directly into the modem. But when I use EITHER the Airport Extreme OR Express to set up a wireless network, I always find myself with the light flashing orange and not an IP address. I could see the extreme in toast OR Express being toast... but both? Seems very unlikely.

  I am open to any suggestion. Charter think the question is my wireless network and Airport utility says that my ISP is looted. Thank you guys but you can not be right. I wonder if the modem is actually toasted bread. Capable of being connected to a computer but freaks when connected to the airport? I don't know, it drives me crazy, and every solution I throw at it ends just flashing back to me telling me that I have no IP address. Help, please!

  What is the exact model of your Arris modem number?

  When you get the orange flashing status LED, what are the exact errors that AirPort Utility has identified?

  When you "power drove" do do you something like the following Tip of an airport users? Have you experienced any type of power failure or voltage?

• HDX - 8 T1000: HP HDX 18 t

  I wanted to ask an experts question. When I got my computer made many years ago, I got an analog TV card installed in my laptop. The antenna is never good but if I jiggle around, I can be at times of the public television channel, and since I don't own a TV it's wonderful to be able to see the Masterpiece Theater on my laptop.  I think to upgrade to Windows 7 and I was wondering if I could switch the TV card to a digital TV card? I've seen digital antennas on Amazon for less than $10.

  I don't know how to check these things there would be what someone has information that could help me answer my query?

  Thank you very much for your help. I always appreciate the assistance of the experts on this forum. If you think I could get a digital TV card do you know how I would find that I need and how to install?

  Once again thanks a lot ~

  Hello

  That's the $ 64 million question because your machine is too old and new technology comes out daily, or even hourly. You buy a new machine to update in 3 months, you can buy a better machine even cheaper.

  I can't find a BIOS for your machine saying it supports digital TV card.

  Kind regards.

• How to increase the performance of xy-graph

  Hello

  I'm running a continuous collection of data with a NI PCI 6133 (4 x channel HAVE @ 2, 5MS/s each) on a WIN 7 PC (LabView FDS 2012). Inside a while loop I'm able to acquire 2000 samples per loop for each channel with a stable performance loop of about 1, 25 kHz. Out of these data, I'm 24 calculation values that will be shown on 6 xy-graphs (4 values on each chart). Data acquisition runs up to 2 minutes.

  Preparation of data and setting xy-graphs updated seems to be a big bottleneck. For this I wrote a simple point of interest, by comparing the xy-graph and table diagram performance clearify. For the same amount of data, the chart table is about 3 times faster, according to the ability to draw only the last value again. The xy-graph must update the whole plot of each iteration.

  If I also remove the preparation of complex data of the xy-chart, the chart diagram is up to 6 times faster.

  Landmark xy-graph

  

  Diagram graph of reference (including the preparation of data for chart xy)
  

  

  Benchmark graph diagram (without preparation of data for chart xy)

  

  Questions

  -Are there a way to optimize the data part of preparation of the xy-graph?

  -Is it possible to draw only the last value again in a xy chart as a graphic diagram?

  Why can I not use a graphic diagram?

  -Because the time base is not constant.

  My ideas:

  (1.) during measurement, I use a graphical diagram. I know that there will be some failure according to the variable time base. After the acquisition of the acquired data will be shown in xy-graphs (as an only necessary update) with the good time base.

  2.), I show all the data in a xy chart. Maybe just values the last 1000 would be sufficient.

  XY-graph with simply display the last 1000 values of reference

  

  Are there other ideas how to speed up xy-graphs?

  Thank you very much and best regards,

  Michael

  MichaGue_01 wrote:

  Why can I not use a graphic diagram?

  -Because the time base is not constant.

  This does not mean that you cannot use a chart.  You should read my injurywaveform charts nugget.  As long as you acquire your DAQmx device signals, you can wire all your signals directly in the table and it will load the time base.

• Why WPF vector Plot taking so long (10 sec) to Render 4 x 1000 points when zoomed in tight on the y-axis?

  It is a bit of a pathological taken on a problem that we see in our use of the WPF chart, but it highlights the source of the problem, I hope.

  The attached simple application has a WPF (RenderMode = vector) graphic and 4 LinePlotRenderers, each trace some 1,000 points (data). When you try to resize the window (or maximize chart), it takes about 10 seconds to display the chart (resolution 1440 x 900). This example is very tight zoomed in on some pathologically noisy data; I think that the problem of the stems, somehow, because of the noisy data goes off top and bottom of the screen at each point.

  If zoom you out (ex: the interval value Y [-5000, 5000]) the rendering performance improves to ~ 1 sec, but we don't want to artificially limit our users in their zoom.

  

  I found this passage in Raster or turning off anti-aliasing allows, but we would like to use the vector rendering for esthetics and because LinePlotRender Raster, we cannot define StrokeThickness.

  Any suggestions how we can keep the vehicle for anti-aliasing and improve rendering performance?

  (I tried several configuration, but I develop AnyCPU, on an Intel i5 with integrated graphics NVidia)

  After looking at your example, I think your analysis is correct: the generated WPF way objects take considerably more time to make when they become visually louder. Because vector mode is designed to provide the same Visual rendering as WPF, it is limited by the performance of the WPF visuals.

  As a workaround for race thickness raster support, you may be able to use the custom converter attached instead of a line rendering engine. The custom converter uses overlap to simulate thicker lines (even if it is limited by the resolution of the bitmap raster image).

• How can I throw 100 samples per second on a graph?

  Hello

  I take a CANBus 100 samples per second, and I would like to present these data in a real-time graph. I want to see all 100 samples and the graph refresh every 1 dry, I use a waveform table.

  I would like to than my table updated with new data every one second (1 SEC 100 samples, 200 samples of 2 sec, etc.) and be able to see all 100 samples we take in real-time in the chart. My question is it possible? I think that some how I need to change the x in the graph scale? I did a little code in which I change the x of the chart scale and put in real time, but in the graph shows only a sample of 100 samples that I take every second, can you please suggest a solution for this?

  
  

• Table of waveform does not change with time

  Hi all

  I have attached the VI I'm working. I haven't done any progress with VI after watching a few tutorials and read. I probed the entrance to the waveform graph, and it is simply not chaning over time (x-axis). What should I do? Data works very well.

  Sorry end that.  Here, it's in 2010

  Dynamic data wires are blue SNO - they can take almost all data - (some of us older users despise them as much as express screws) hang a DDT directly by a waveform chart to your question the WC provided by default Datatype DDT.  Conversion of the scalar measure express vi everyone downstream forced to accept that the data was just a simple DBL.

• Installation of updates and the computer shuts down

  By turning on the computer it goes to 3 of 3 updates to the installation, then stops. This happens several times and am unable to turn on the computer. I brought the laptop with Vista already installed on it, not so no disc
  I am out of resources on how to solve the problem!

  Hello Barby,

  The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe . When the Windows NT kernel detects that or the other of these processes has stopped, it shuts down the system and triggers the STOP 0xC000021A error. This error may have several causes. Among them are the following:

  • Incompatible system files have been installed.
  • A Service Pack installation has failed.
  • A backup program used to restore a hard drive does not correctly restore files that may have been in use.
  • An incompatible third-party program has been installed.

  Step 1:
  You can try the above troubleshooting steps I have provided about the "configuration updates 3/3. 0% complete".

  Step 2:
  Please follow the troubleshooting steps mentioned in the link below
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;156669

  Step 3:
  Otherwise, please try the steps below to restore your computer to the last working state.

  (1) start the system using a Windows Vista DVD.
  (2) system will ask you to «Press any key to boot with the CD or DVD...»
  3) press enter or another button to continue...
  (4) "thewindow installation" will open. Click Next.
  (5) choose the option "repair your computer" in the next window.
  (6)the system recovery options window"opens. Choose the Option 'System Restore'.
  (7) now select 'System Restore' window you invite, and then click Next.
  (8) he will ask the 'restore to choose Point".
  9) click in front of the box 'Show Restore Points more than 5 days'.
  (10) select the date on which Office worked very well. And then click Next.
  (11) 'drive to confirm to the recover window"will ask you choose Drive where the OS (Operating System) is installed." Click Next.
  (12) confirm your Restore Point window will be fast, click Finish.
  (13) A pop up you will be asked to continue the restoration of Windows. Click Yes.
  (14) the system will begin to restore the operating system for the selected restore point. Once finished with this the system will ask you restart indicating that the machine is restored successfully.
  (15) reboot the machine.

  By performing the steps mentioned above, system will be re-recorded on the date on which it was working fine.

  Note

  : S ' ensure that to disable your automatic update function after the restart, to avoid to automatically download patches.

  [If this post can help solve your problem, click "propose as answer" below or the "Vote as helpful" button at the top of this message.] This way you can help others find the successful resolutions of questions].

  ---