Overview of the data in environmental assessments through different essbase servers

Similar Questions

• Loading the data into environmental assessments?

  Hello
  
  When you load data via a DLR in environmental assessments and you have a member in the source file that does not exist in the general plan, just to stop at this point and said 566 666 files and status is 'error' no .err file is generated. Is there a way to continue in order to jump the lines which does not exist and then write the lines in the .err file that do not exist? I don't want to have to reload the file even hundreds of times to find the missing members...

  It stops at two conditions.
  1. you have not used a load rule to load data and/or
  2. you have specified in the EA to abort error

• Passing the data change to Subvi through reference: always newest lack input value

  Hello world

  I'm having a problem that I can not find the solution. I searched the forum and google, but I couldn't find an explanation. I hope you can help!

  In the attached draft, there is the "main.vi", which I use to control an industrial manufacturin mashine. On the façade, I have a group called "manual control". Whenever I have change a value in the cluster, an event is triggered to run the case 'hands-on' in the 'Wirbelschicht_main.vi' [called 'FBC (control of fluidized bed)' in the pattern-block main.vi]. In this case, the data in the cluster are updated via a reference. The order run "Manual control" case is placed in a queue.

  When I change the value of, for example, "InAirTempSet" from 0 to 5, then from 5 to 9, I would expect numbers in the Subvi update in the same way (first from 0 to 5 and with the next click 5 to 9). What I see is that the update process in the subviis always one not behind. Which means, I change the value from 0 to 5 in the main.vi and nothing happens. Then I change the number of 9 and 5 in the Subvi, 5 is received. Only when I change the number in the main.vi again, the 9 is passed to the Subvi.

  What is the reason for this and how can I fix?

  Thank you!

  Qbach

  It is the expected behavior. You read the reference control value at the same time waiting for the order to the queue. This means that once the queue ("hands-on") command is received, the value has been already read a long time ago.

  To avoid race conditions, transmit the data using the queue instead of read it asynchronuously with nodes of property. You are running in a race condition here, because that's exactly what your code tells the application to do!

  Norbert

• Overview of the data in the service Console Regional on the client machine generates an error.

  When I saw the data in the Regional (version 11.1.1.4) service console on a client workstation, I get a "cannot sign in the field. "Error of initialization of the ORB.java.io.FileNotFoundException: domain.db (access is denied)" error. Now, if I use the client URL to Admin Console on the same computer am able to preview the data correctly. Also when I saw the data on the client installed on the server can't correctly preview data. Just when I use the Admin console client installed on a workstation, I get this error. Any suggestions?
  
  Thank you
  Ted.
  
  Published by: Teddd on March 26, 2013 14:51

  TimG says:
  I certainly say it is your problem (I don't even know how to see / control when installing local vs. web-Launcher finds Java, or if indeed there is a difference) but I think it's plausible enough to a test value

  In 11.1.1.3 the Regional (not the web version) service console will resume java installed on the machine, if Java has not been installed it will use the settings in the admincon.lax file for example lax.nl.current.vm=E:\Hyperion\common\JRE\Sun\1.5.0\bin\java.exe
  So basically if you have installed Java 1.6 it will pick up and use that otherwise it will use the default JRE INSTALLED with Hyperion. The web console needs a version of Java installed in order to use Java Web Start.
  And I agree to have a different version of Java that sustained can cause problems using the Regional service console.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• display the data in a row and different columns in the listbox

  Hi I want to disply data in different and same columns line in listbox using InsertListItem(), but it displays data in different lines... I use the escape sequence for the creation of columns... Also, I want to display an integer which I converted to a string using sprintf() on listbox with a Word, for example 10 Kg where 10 is stored in a variable and I must add Kg, how to do it in a single call to InsertItemList()... Thank you

  I see: you must create all of the line before adding it to the list box:

  sprintf (string, "&d\033p30l%s\033p100l%s\033p170l%d\033p220l%.2f", itemNo, itemName, itemPack, 123, 15.98);
  InsertListItem (panel, PANEL_LISTBOX , 0, string, 0);
  

• Display of the data even control attributes in different components

  Hello
  
  I have a (based on a VO) data control that contains 6 attributes, I want to display the attributes in my jspx like this page:
  
  PanelForm1
  attr1:... attr3:...
  attr2:...
  
  Table1:
  attr4 attr5 attr6
  ------ -------- --------
  ------ -------- --------
  ------ -------- --------
  ------ -------- --------
  
  Forms10g similar when you have a block with 10 records and some set number of items property display 1.
  If she has a table with 10 records, but some items are displayed as 1 plug.
  
  That's what I want to...
  any ideas?
  
  Thank you.

  I'm confused by your question. AF:panelForm is usually used to display a single record, while af: table is to display multiple records. What record in the table data in the panelform supposed to match? If this is the selected row, you can try just drag / drop the VO on your page in a table (only some attributes to show 4,5,6). Then do the same thing and drop as a form, show only the attributes 1,2,3. You may need to assign the table autosubmit and partial trigger shape so that the row is updated when you change the selection.

  If you mean something else, to you for more information.

  John

• He would work to have 3.2 and 4.2 on the same server of db with different web servers?

  Hello

  I have three existing environments which are 11g and Apex 3.2 on Linux (Dev, Test, Prod). I have also three front-end web servers that are Windows 2003 with IIS for Apex (Dev, Test, Prod)

  We have three new Windows servers running 2008 we upgraded to.

  So, my question is on the upgrade of Apex to 4.2 at the same time. I would like to have the new Windows Server (Dev), and then point to the same server to Linux as my old Windows 2003 db. And it points to the same instance of db. My goal would be to achieve production with this configuration and then just do a redirect to URL on the old Windows 2003 server and that it points to the new Windows Server 2008. In this way, that I wouldn't need to move data from one instance to another.

  Would this work? I have installed 3.2 and 4.2 on the same instance of db? A 3.2 Windows Server and have a pointed Windows 4.2 server on the same back-end server?

  APEX lives on the database instance. Run you the APEX on the database upgrades. The short answer to what I think is your question is No.

  I don't know what is the relevant motivation?

• After loading and Calc'ing get an overview of the database in data error

  I do my developer on my laptop and the transfer of the object on the server
  
  I loading and calc would be about 4 years of data on Bith my laptop and the server
  
  When I try to get an overview of the data
  
  I get this error
  
  The names of members in doubles with overview of the data are not supported on my laptop
  
  is the because I clicked on allow Dup Member?
  
  because I don't have all the DUP in my plan
  
  and on the server, this is the error I get is
  
  Cannot connect to the olap service
  cannot connect to the Essbase Server
  Essbase error 1051293
  Login Failied
  
  but I am connected and connected to the server
  
  Please notify
  
  Published by: level following December 16, 2011 13:26
  
  Published by: level following December 16, 2011 13:31

  I'm not in front of a system to check, but have you looked at the duplicate property on your new app? I guess that the setting is saved with the .otl, but overall when copy you it.

  In this case, Yes, rebuild the hierarchies is probably the way to go.

• to access the data of hyperteminal using labview

  Hello Sir,

  I'm a problem to access the data of hyperterminal directly through LabVIEW. Whenever I go to hyperterminal and the text capture option allows you to select data and save it in another file. My application requires automatic access of hyperterminal instead of manually do each and bread time. Is this possible? I enclose a VI that I tried. Please give me a suggestion about the present.

  Do not use hyperterminal. Use the series of VISA. Look at the examples that come with LabVIEW.

• The music on the data drive storage

  I have a computer Dell with 58.5 GB on drive C and 229 concerts on drive D (Data).  Can I move my Itunes Music on the data reader without going through a future problem adding music.  My C drive tends to fill with photos, etc., so I keep on moving them to the D drive.  I would also do it to the music from Itunes.

  I have a computer Dell with 58.5 GB on drive C and 229 concerts on drive D (Data).  Can I move my Itunes Music on the data reader without going through a future problem adding music.  My C drive tends to fill with photos, etc., so I keep on moving them to the D drive.  I would also do it to the music from Itunes.

  Get a bigger internal drive and a clone.  Best solution in the long term.

• How to analyze the data of the cDAQ and Signal Express, especially after analysis?

  In the first series of tests of my instrument, it took longer than expected for the race.  Thus, the data was saved in 6 days.  The file is too large for export to Excel.  At the beginning of the project, I was as ignorant as I could go ahead and add analysis and the scaling of measures.  By the scaling, I mean my data of switching current dew points or whatever it is that I record.

  How to evolve the data to read the output data as expected 4mA = point of dew of-20 C or 0 PSIG?  Can I pre program this to be recognized for each event?

  For real analysis I am doing – I would first analyze the data I recorded and choose different points to send to Excel to graph and analyze.  Is this possible?

  Secondly, I would like to know how to scale and analyze my data in the project without having to do this later analysis in the future?

  I have a cDAQ-9172 with LabVIEW signal Express 3.0 that uses four modules - 9211 2 modules of thermocouple, my 4-20 1-9201 module +/-10V module and 1-9203.

  Thank you for any assistance.

  Hi Patricia,

  "' You can do this by adding a step Load/Save signals ' analog '.  I hope this helps!

• When refreshing a movie thumbnail 13 adobe Photoshop elements the date changes

  When updating saving the metadata file info in adobe Photoshop elements 13 organizer on a movie thumbnail the date will change to a different/wrong date. Any suggestions to get it to read the correct metadata on a movie (MOV) file.

  fader5 wrote:

  When updating saving the metadata file info in adobe Photoshop elements 13 organizer on a movie thumbnail the date will change to a different/wrong date. Any suggestions to get it to read the correct metadata on a movie (MOV) file.
  

  The problem with movie files, is that the "date taken" is not recorded by the camera in a metadata section. Therefore, the Organizer assumes "creation date" returned by the computer OS must be used. You can change (update) the "date taken" in the Organizer so that the catalog keeps information you entered in the catalogue.

• Validate the Date Format

  Apex 3.2

  I have a field called P14_START_DATE.

  Display as a type is Date Picker (jj. MM. YYYY).

  Now, if the user is using the pop-up calendar, the field is filled with for example 07.12.2013.

  I have 2 standard validations, not null and specified element is a valid date.

  If the user decides to enter the date, they can use a different format, for example 12/07/2013, I don't want to happen.

  How can I validate the field, so that they get an error if they do not use the exact format

  Gus

  GusC wrote:

  If the user decides to enter the date, they can use a different format, for example 12/07/2013, I don't want to happen.

  How can I validate the field, so that they get an error if they do not use the exact format

  Create a PL/SQL function to return Boolean validation for the article and try to convert the value of the element to a date by using the format mask FX to require an exact match between character data and the model format.

  declare
  
    d date;
  
    invalid_date_format exception;
      pragma exception_init(invalid_date_format, -1861);
  
    invalid_date_length exception;
      pragma exception_init(invalid_date_length, -1862);
  
  begin
  
    d := to_date(:p14_start_date, 'fxdd.mm.yyyy');
  
    return true;
  
  exception
  
    when invalid_date_format or invalid_date_length
    then
      return false;
  
  end;
  

• convert the data that are not text

  create table x as
  (line_1 varchar2(10))

  INSERT INTO x  VALUES ('001165899', '0506', 'ZIP1003', 'ABC', 'xyz')

  It is the source table, it transforms (to meet the requirements of the company) to another table where column line_1 is converted to a data type of number, and all the data in the column of line_1 which is the text are converted to-1.

  user628919 wrote:
  How the hyphen may be replaced for the data where it grows in different places within the data.

  The solution needs to keep other rules - convert to_number, text-1 column, ignore nulls (see below)-, more remove the hyphen of digital data.

  to_number(regexp_replace(line_1, '.*\D.*', '-1'))
  

  As Vivek L, complete with a convenient link for documentation, said "replace should work.

  to_number(regexp_replace(replace(line_1, '-'), '.*\D.*', '-1'))
  

  John

• Different Dates expires in overview of the order of the day and display detailed elements having extended the term of the lease (through the vCO Workflow)

  Hello

  I have two different points of view for the field due Date for a virtual machine.

  In the Overview of the agenda , I have the correct expires date of (in DB) as you can see in photo 1.

  Photo 2 shows the detailed view of the elements that one here is a date old expires before I extended the lease on this point.

  I extend the term of the lease without the vCAC process "extend Lease Time.

  I created a workflow to allow only 30 days to expand and write directly through the entity Expiration Date in the DB.

  Is there another DB-field to be updated with the new Expiredate?

  Is this a mistake?

  

  

  I solved this by myself once I discovered how this view of retail.

  See the solution here http://vautomate.wordpress.com/2014/04/17/extend-leasetime-in-vcac-with-vco/